Assam Police Housing Corporation Ltd has published Infrastructure Development Such As Construction Of Rcc 2 Storied Reserve Office Bldg, Rcc 2-Storied Male Barrack (60 Persons Capacity) Etc For Police Reserve At Hamren, West Karbi-Anglong. Infrastructure Development Such As Construction Of Rcc 2 Storied. Submission Date for this Tender is 20-09-2021. Barrack Tenders in Hamren, West Karbi-Anglong Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Sep-2021 | Corrigendum | Date | 20-09-2021 |
| Sl. No. | Item Description |
| 1 | Topographical Survey with Total Station |
| 2 | Preparation of Master Plan |
| 3 | Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. |
| 4 | Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with a lift upto 1.5 m and lead upto 200 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 Mechanical Means |
| 5 | Cutting down trees where the building is to beconstructed of girth exceeding 300mm, grubb ing up roots, filling pits and levelling off groundlopping branches, trimming and removeing to distance beyond 30m and stacking serviceable materials and cleaning site etc. as directed.ii).Girth exceeding 1000mm but not exceeding 1500mm |
| 6 | Jungle clearence including uprooting ofvegitation, grass, brush-wood, saplingand trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm |
| 7 | Jungle clearing including cutting bamboo and trees below 500mm girth and removing the same outside the limit as directed. (b). Mediuum jungle. |
| 8 | Earth work in excavation for foundation trences of walls, retaining walls, footing of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2m below the existing ground level. (a) In ordinary soil. |
| 9 | (B) Extra over item No. 1.1 (A) above for each 1 m depth or part thereof beyond the initial depth of 2 m. |
| 10 | Earth work in excavation for foundation trences of walls, retaining walls, footing of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2m below the existing ground level. (B) In hard / dense soil. |
| 11 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering where necessary shall be measured and paid separately).(a) In prop. 1 cement: 3 sand: 6 coarse aggregate by volume. |
| 12 | (b) In prop. 1 cement: 4 sand: 8 coarse aggregate by volume. |
| 13 | Plain cement concrete apron in prop. 1:4:8 with 20mm down graded course agg. Over soling including neat cement finished using cement slurry 2.75 kg. of cement per sqm. Of floor (b) 50mm thick |
| 14 | Providing and laying 25mm thick damp proof coarse with cement concrete in prop. 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. |
| 15 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)(I) Using Mixer Machine(A) In substructure up to plinth levelFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.N) Without using admixture, plasticiserb) M20 grade concrete or Prop. 1:1.5:3 |
| 16 | (B)In super structure from plinth level up to 1st floor level.ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing.N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 |
| 17 | Providing and laying plain/reinforced cement concrete works in prop. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate, 20 mm down) including dewatering and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). (a) In substructure up to plinth level : Foundation, footing, columns with base, tie and plinth beam, grade beam, pile cap, base slab, retaining wall, walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level. |
| 18 | (b) In super structure from plinth level upto 1st floor : (ii) Columns, Pillars, posts, struts, suspeded floor, roof landing, shelf and support, belcony, lintel, sill band, beam girder, bressumer, cantilever, staircase including preparing the top surface and finishing of noising. |
| 19 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforced concrete and plain concrete work.(A) In sub structure upto plinth level: Foundation, footing, columns with base, tie and plinth beam, pile cape, base slab, retaining walls, walls of septic tank, inspection pit and the likeupto plinth level. (i) using 25mm thick plank. |
| 20 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforced concrete and plain concrete work. (A) In sub structure upto plinth level: Foundation, footing, columns with base, tie and plinth beam, pile cape, base slab, retaining walls, walls of septic tank, inspection pit and the likeupto plinth level. (i) using 38 mm thick plank. |
| 21 | Sides of tie beams, grade beams etc. at or below ground level.(b) Using 25mm thick plank |
| 22 | Sides of tie beams, grade beams etc. at or below ground level. (i) Using 38mm thick plank |
| 23 | Columns, pillars, posts & strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having palne vertical face.(ii) Using 25 mm thick plank. |
| 24 | Columns, pillars, posts & strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having palne vertical face. (i) Using 38mm thick plank |
| 25 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M b) using 25mm thick |
| 26 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (ii) Using 25mm thick plank |
| 27 | Flat surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200 mm in thickness. (i) Using 38 mm thick plank. |
| 28 | Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like. Using 38mm thick plank |
| 29 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank) |
| 30 | Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in : (1) Columns, pillars, post and strut of square / rectangular / poligonal in plan or any shape like Tee / L etc. having plain vertical face. |
| 31 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties.(a) For depth not exceeding 1.0 M |
| 32 | Flat surface such as soffits of suspended floors, roof, landings, cantilever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200mm in thickness |
| 33 | Staircase with sloping or stepped soffits including risers and stringers but excluding landing. |
| 34 | Providing soling in foundation and under floor at all levels with stone/best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials complete.(a) Brick flat soling |
| 35 | Brick work in cement morter with 1st class brick including racking out jointsand curing complete as directed.(I) In Sub-structure upto plinth level including dewatering if necessary(c) In prop. 1:5 |
| 36 | (II) In superstructure above plinth level up to 1st floor level.(c) In proportion 1:5.(1 cement:5 sand) |
| 37 | Brick work in cement morter with 1st class brick including racking out jointsand curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4. |
| 38 | 112mm thick 1st class brick nogged wall in cement mortar embedded with protruding rod in column including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protruding M.S. rod/ tor steel will be measured and paid separately under relevant item of steel work)(c) In cement mortar in prop. 1:5 |
| 39 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paidseparately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4(1 cement:4 sand) |
| 40 | 75 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod / Tor steel of column to be embeded in cement mortar and will be measured and paidseparately) (a). In cement mortar in proportion 1:3 (1 cement:3 sand) |
| 41 | 15 mm thick Cement plaster in single coat on rough side of single or half brickwall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (a). In cement mortar 1:3 |
| 42 | Cement concrete works in topping 1:1:2 (1 cement, 1 sand : 2 graded aggregates on RCC floor , tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg of cement per sq m of floor (base concrete to be measured and paid separately) to be laid in panels including curing complete as directed.(b) 20 mm thick. |
| 43 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. |
| 44 | Plain cement concrete floor base in prop 1:3:6 laid in alternatebays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick |
| 45 | Plain cement concrete floor base in prop1:3:6 laid in alternatebays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. c) 100mm thick |
| 46 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base ofcement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed.(Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above |
| 47 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range Somany/ Orient/Nitco/Asian Make i) Of size 200mmx200mm and above |
| 48 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMICi)Normal range (Sizes 300 mm x 300mm and above)(a)Orient made:Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate |
| 49 | Cement plaster skirting (upto 30cm height) with cement mortar (1 cement: 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.(a) 15 mm thick |
| 50 | 15mm thick cement plaster in single coat on rough side of single or halfbrick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed.A) On rough side(b) In cement mortar 1:4 |
| 51 | B) On fair side(b) In Cement mortar 1:4 |
| 52 | 15mm thick cement plaster in single coat on rough side of single or halfbrick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (a) In cement mortar 1:3 |
| 53 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii)Super Ductile (SD) TMT reinforcement bars |
| 54 | b)Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc.. |
| 55 | c)ISI approved Mild steel reinforcement bar(M.S.Bar) |
| 56 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast,providing closing / holding device for two nos. tower bolts of door for each sides and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying priming coat to all steel..... |
| 57 | Providing fitting & fixing steel windows of standard rolled steel sections as per relevant I.S Code,jointsmitredand welded with 15mm x 13mm x 100mm lugs embedded in cement concrete block of M- 10grade including providing and fixing of projecting hinges (not more than 65mm and not lesshan 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mm x 12mm sqare bars duly welded to steel frame at not more than 120mm c/c applying a priming coat of red-lead paint etc. complete asper drawing a) Openable. |
| 58 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.(a)2 Track sliding window(i)6mm clear glass |
| 59 | (ii)5mm frosted glass |
| 60 | Providing barbed wire on the existing barbed wire fencing with seven strands of barbed wire 12 S.W. G.x 2pliesx 4 points at 75mm apart including supplying, fitting and fixing with galvanised staples 38mm x 38mm x 3mm sizes with existing posts of the fencing, including removing rotten barbed wire as directed, complete with strengthening of post andtightening of the old barbed wire and joinining old serviceablepieceson remaining lines as and where necessary and as directed. |
| 61 | Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. a) M. S. Angles……. 50x50x5 |
| 62 | Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (b) 1.60mm thick sheet (iii) Size 125mm x 60mm (Single rebate) |
| 63 | Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately).(a) 1.25mm thick sheet. (iii) Size 125mm x 60mm (Single rebate) |
| 64 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core.(ii) 35 mm thick . |
| 65 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100mmx75mmx3.5mm) 6Nos. With necessary wood screws.(b) Non decorative typeand block board core. (ii) 35mm thick. |
| 66 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core.(iii) 30 mm thick . |
| 67 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100mmx75mmx3.5mm) 6Nos. With necessary wood screws. (b) Non decorative typeand block board core. (i) 40mm thick. |
| 68 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished)(A) Sliding door bolts(ii) 250 mm x 16 mm |
| 69 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door boltsi) 300mm x 16mm |
| 70 | b) Tower bolts, i) 300mm x 12mm |
| 71 | (B) Tower bolts(iii) 200 mm x 12 mm |
| 72 | (C) Door handles (iii) 150 mm |
| 73 | c)Door handles, ii) 100mm |
| 74 | g) MS butt hinge I) Heavy type i) 50mm x 40mm x 2.5mm |
| 75 | Supplying ,fitting and fixing brash fittings of approved make including necessary C.P. brash screws etc. complete. (b) Tower bolts (iii) 200mm x 10mm |
| 76 | (c) Door handles (iii)150mm |
| 77 | Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. |
| 78 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100 mm thick CC (1:3:6) base over one brick flat soling including 15 mm thick cement plastering in proportion 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. i). 300 mm wide and average 150 mm deep with bed slope 1 in 150 with initial depth of 100 mm |
| 79 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.(ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. |
| 80 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm. |
| 81 | Earth / Sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, Forest Royalty, Sales tax and other duties & taxes as may be necessary.(b) with hill sand obtained by truck carriage including loading and un loading, and carriage to the site of work. |
| 82 | (c) With river sand or silt (Predominalty non plastic) by truck carriage including loading and unloading. |
| 83 | Grading roof for water proofing treatment (a) Cement Concrete (i) 1:2:4 |
| 84 | Applying priming coat over new wood and wood basedsurfaces upto 10cm in width or girth after preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wood scrapers and sand papering and knotting. (b) with ready mixed paint-white wood primer |
| 85 | Finishing wall with two coats of acrylic emulsion exterior coatings of approved brand of required shade, thinning by adding water as per the specification of manufacturer after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.i) Unicem Shakti |
| 86 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture to give and even shade including cleaning the surface of all dirt, dust and other foreign materials, sand papering and stopping.(I) Surface over 100mm in width or girth. (b) High gloss (Asian paint / Berger paint/ ICI paint / J&N paint / Nerolac) paint. |
| 87 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 88 | m) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. (i).Priming coat with distemper primer |
| 89 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. |
| 90 | f) Distempering with dry distemper of approved brand and manufacture(two coats)and of required shade on new wallsurfaceto givean evenshade, over and including priming coat of white primer after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. |
| 91 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and externalafter removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. |
| 92 | (a) Applying one coat of cement primer of approved brand & manufacture on new wall surface after thoroughly brooming the surface free from mortar droppings & other foreign matter & including preparing the surface even and sand papered smooth. |
| 93 | (b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after thoroughly brooming the surfacesto remove all dirt and remains of loose powdered materials. |
| 94 | (d) Extra over item No.(b) & ( c )for every subsequent coat of water proofing cement paint of approved brand & manufacturer |
| 95 | Providing two coats of J.K Wall Putty ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) |
| 96 | Providing precast RCC slab in prop. 1:2:4 reinforced with 10 mm TMT/HYSD bars @ 150 mm centre both ways tying with 20 guage black annealed wire with necessary shuttering, curing etc. complete including fixing in position as directed. (a) 100 mm thick slab. |
| 97 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary land compensation, Municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% duduction for shrinkage to be made from total quantity) etc. complete as directed and specified, including forest royalty within a distance of 8.00 km. (forest royalty shall be reimbursed on production of necessary certificate from the forest authority duly counter signed by D.F.O. concerned).(a) Other than Guwahati city. |
| 98 | Providing and fixing Stainless Steel (Grade 304) railing made of Hollow Tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainess steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainess steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge. (For payment, only weight of Stainless Steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered). |
| 99 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (10 kg) BRAND : FIRESTOP / FIREND / FIRE SHIELD |
| 100 | LANDSCAPING:- POT PLANTING. Supplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (C) With Mokara. (II) Using earthen pot of 60 cm dia. |
| 101 | BED PLANTING. Supplying and planting of Dahlia / Chrysanthemum / Gladiolus on the ground ( bed planting, bed size 45 cm x 45 cm x 45 cm) including the preparation of the soil, providing organic manure and fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . |
| 102 | TREE PLANTING. Supplying and planting of ornamental trees (1"-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE. (A) Neem / Mahaneem / Beef wood/ Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu/ Ajar |
| 103 | (B) Kanchan / Nahar / Arjunu |
| 104 | Flowering Tree (A) Gulmohar / Ashok |
| 105 | ProvidingSUN ROCK HIGH CST/ DEVI paver block/ tiles of concrete grade M30 or above of approved quality, size shape of specified thicknessover a levelling bedding layer of 30mm compected sand over a base course of WBM or PPC (base course to be paid saperately) inculding cutting where necessary finished with spreading, sweeping jointing sand and compacting the pavers using vibrating compector as specified and directed. SUN ROCK HIGH CTS Tiles (Pavers)(a) 80 mm thick |
| 106 | Providing, fitting and fixingM.S.grillof required pattern for windows/ clerestory windows/ openingwith M.S. flatsat required spacingin frame all round,squre or round M.S.bars with round headed bolts and nuts or screws.I .Plain grill.(c) Fixed to Brickwork/P.C.C/R.C.C. |
| 107 | Providing, fitting and fixing M.S. grill of required pattern for windows clerestory windows / opening with M.S. flats at required spacing in frame all round, sqare or round M.S. bars with round headed bolts and nuts or screws. IIOrnamental grill (a).Fixed to wooden frames |
| 108 | Providing, fitting, hoisting and fixing of roof trusses fabricated out ofcombination of anytwo or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.b) Using other ISI marked approved brand tube |
| 109 | Providing Pre Painted Galvanized IronSheetRoofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement(iii) 0.50 mm thick |
| 110 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing)at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement(iii) 0.50 mm thick |
| 111 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. |
| 112 | Pre-cast Terrazo tiles 20 mm thick with marble chips of sizes up to 6 mm laid in floors, treads of steps,landingwitha bedof10mmthick cementplasterinproportion1:3 (1 cement : 3 coarse sand)jointed with neatwhite cementslurry mixedwith pigment to match theshade ofthetilesincluding rubbing and polishing complete. (c)Using ordinary cement |
| 113 | Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are tobe protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessarylocking arrangement on both faces, arrangement for temporary closing the gateand 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts). |
| 114 | Construction of R.C.C. ring well of 1200mm inside diameter including supplying necessary ring of 75mm thick and 500mm high of prop 1:2:4 reinforced with 8mm dia M.S. rod at 230mm c/c vertically and 5nos of 8mm dia bar horizontally along with R.C.C. well curb of size 400mm high and 100mm thick at top and 50mm thick at bottom in prop. 1:2:4 reinforced with 5nos of 8mm dia rod at 200mm c/c vertically including sinking of R.C.C. ringto a required depth bailing outwater, mud etc. if necessary and fitting and fixing of R.C.C. kerb and ring in proper position with cement mortar of prop. 1:2 including with fitting in sides by sand in layer not more than 150mm and duly compacting the same up to the platform level complete as directed by the department. (a) Up to 10.00m depth . |
| 115 | (b) Above 10.00m up to 15.00m depth. |
| 116 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) |
| 117 | Finishing old / new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish of Sandex Matt . Brand of Snowcem India Ltd. of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) |
| 118 | Wall painting (two coats) with acrylic emulsion paint approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.(a).Acrylic Emulsion Paint approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) |
| 119 | SANITARY & WATER SUPPLYWORK Providingfitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)Indian type W.C Orissa pattern of size 580 x 440 mm b) Coloured ii) Hindware make |
| 120 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware makea) White(i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover) |
| 121 | Providing fitting & fixingstainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipeetc. complete includingpainting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (iv) Single Bowl (240 x 180) Flat Edge - Glossy (Cat.No.C8535) |
| 122 | Supplying, fiting and fixing PVC flushing cisternwith all internal fittingswith CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) ii) Hindware makeb) Coloured(i) Sleek+ PVC cistern |
| 123 | Providing vitreous Chinawash basinwith CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)::Basin (without pedestal)(B) Hindware Make(a) White(iii) Viking 550 x 400 (Cat.No.10008) |
| 124 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. |
| 125 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (ii) Agmeco Make (a) Cubin (Cat. No.CB-00102) |
| 126 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia |
| 127 | (iv) 75 mm dia |
| 128 | Supplying, fitting and fixing 87.5 degree PVC bend of(Supreme/Prince) or other ISIapproved including joining ,fitting and fixingetc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. |
| 129 | (iv) 75 mm dia. |
| 130 | Supplying fiting and fixing 87.5 degree PVC bendwith doorof (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia |
| 131 | Providing fitting and fixing PVC cowel of ISI make completeas directed and specified. (v) 63mm dia. PVC cowel of ISI make |
| 132 | C.P. Grating (ii) 110mm dia |
| 133 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. |
| 134 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. |
| 135 | Supplying fitting and fixing G.I. pipes of following sizes, with all necessary approved G.I. fitting such as bend, tee, eibow reducer, nipple, plug, long screw fitting H.W. clamps etc. complete at all level including below G.L. as directed and specified.(A) Exposed on walls(d) 25mm dia (i) Using TATA (Medium) |
| 136 | (ii) Concealed by chiselling or breaking brick wall C.C. / RCC and making good to the damages. (f) 15 mm dia (i) Using Tata (Medium) |
| 137 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary "R" brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (I) Exposed or in trenches a) 50 mm dia ii) Using I.T.C./Nezone (Medium) |
| 138 | d) 25 mm dia ii) Using I.T.C./Nezone (Medium) |
| 139 | f) 15 mm dia ii) Using I.T.C./Nezone (Medium) |
| 140 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)(I) Essco make (Delux/ Sumthing spl./Tropical)(a) Bib cock short body |
| 141 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified ( G.I. & C.P. pipes will be measured separately)(I) Essco make (Delux/Sumthing spl./Tropical) (b) Long body bib cock with wall flange |
| 142 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)(II) Jaquare make (ii) Bib cock long thread |
| 143 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Makeas specified and directed. c) 25 mm dia. |
| 144 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Makeas specified and directed. a) 50mm dia |
| 145 | b) 40 mm dia. |
| 146 | c) 25 mm dia. |
| 147 | Supplying and fitting ball valve as specified and directed.(a) 25mm dia (Gun metal) |
| 148 | Supplying fitting & fixing chrome plated (C.P) stop Cock of approved brand and size as mentioned below a below as directed and specified (G.I & C.P pipes Will be measured and paid separately).(I) Jaquar(a) Continental / Clarion(ii) 15mm dia( Angular stop cock with long thread ) |
| 149 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (i)15mm dia |
| 150 | Supplying fitting & fixing CP pillar cock of 25mm dia of approved brand as specified and directed.(I) Sona make (d) Heavy type |
| 151 | Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately)a) Continental(i) Shower arm 190mm long light body with wall flange |
| 152 | EXTERNAL WATER SUPPLY : Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department .x) Bore hole of 150 mm diameter |
| 153 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.G.I. pipeSUPREME /PRINCE / FUSION /SFMC Brand v) 110mm diameter |
| 154 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe a) TATA / SAIL (Medium)socket should be welded to the pipes. ii) 32mm diameter |
| 155 | Supplyingfitting and fixing GI filter 2.00 metre long. |
| 156 | Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained |
| 157 | Flushing, clearing, washing and watering of the tube well |
| 158 | Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materialsof various filtration rate per hour of DOLPHIN make with all necessary fittings such as valve,bib cock,pipe connection etc.with a free maintanance period of six months. (A) With Zoloto fittings. (II) 2000 liters capacity (a) 4 mm thick Vessel |
| 159 | Supplying & installation of 2HP Motor with Jet Pump of Crompton Brand including necessary accessories & Starter as directed |
| 160 | Supplying and Installation of 1.5 H.P. Crompton Greaves Single phase Pump Submersible Pump Set including necessary Cable for underground and overground. Panel Board as directed by the Department. |
| 161 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 Lt capacity (a)Sintex make |
| 162 | Transportation of drilling rog (order system) with all accessories, compressor machine & developing equal payment & machineries with drilling compressor etc. |
| 163 | Drilling and drilling rog using D.T.H. hammer in all kinds of rock formation including connection of sample at every 3 Nos. depth of boring etc. |
| 164 | Extraction of drilling rog against skin portion including washing with well hole properly & fitting bore hole with bran tonic power etc. |
| 165 | Supplying, fitting & fixing M.S. cashing pipes of 200 mm dia with all necessary fitting such as clamp, post etc. |
| 166 | Supplying, fitting & fixing of M.S. cashing pipes of 150 mm dia with all necessary fitting etc. |
| 167 | Supplying, fitting & fixing suction pipe of P.V.C. material of 50 mm dia with all necessary fitting such as union socket wire rope etc. |
| 168 | Supplying & installation 5.00 H.P. Crompton / Varana Submersible pump made of KSB / CRI for 150 mm dia bore size with automatic starter etc. |
| 169 | Supplying & installation 5.00 H.P. Crompton / Centrifugal pump with automatic starter etc. |
| 170 | Supplying fitting and fixing and laying 1st class ITC or similar approved G.I. Pipes of following sizes, with all necessary bends and similar approved G.I. fittings complete at all levels including below G.L. as directed and specified. (i) Exposed or in trenches b) 80 mm dia G.I. Pipe (Approved rate of APHC Ltd.) |
| 171 | Supplying, fitting and fixing C.I. sluice valve / Air valve of make with all necessary fittings etc. all complete as directed and specified. (b) 80 mm dia (M) |
| 172 | Labour charge for fitting fixing specials with valves including fixing the pipes / Nipples in TP or UGR wall in line & level as directed including testing & commissioning the same. |
| 173 | Construction of Brick Valve chamber as per Departmental drawing and specification including RCC Slab, 100 mm thick all complete including earthwork in excavation & refilling after completin of work & disposing of surplus earth as directed by the department. (a) Size 75 CM x 75 CM (based on APWD building SOR) |
| 174 | Labour charge for carrying placing in position CIDF Sluice Velve / GM Valves complete with supplying all nuts & bolts & 3 mm thick rubber gusket sheet all complete as directed. (a) 150 mm dia |
| 175 | (b) 100 mm dia |
| 176 | Labour charge for carrying providing and fixing full way wheel valve of approved quality with supplying joining materials complete as directed (a) 65 mm dia |
| 177 | Supplying fitting and fixing of PVC pipes including cost of pipes & labours but excluding the cost of specials. (a) 110 mm dia Cost of Pipe-Rs. 266/x10=2660.00 |
| 178 | (b) 75 mm dia Cost of Pipe-Rs. 128/x10=1280.00 |
| 179 | 150 mm dia C.I.D.F. Sluice Valve |
| 180 | 100 mm dia C.I.D.F. Sluice Valve |
| 181 | 150 mm dia G.I. Flange |
| 182 | 150 mm dia G.I. Socket |
| 183 | 150 mm dia G.I. bend |
| 184 | 150 mm dia G.I. Elbow |
| 185 | 150 mm dia G.I. Equal Tee |
| 186 | 150 mm x 150 mm x 65 mm dia |
| 187 | 150 mm dia G.I. Nipple-15 CM Long |
| 188 | 150 mm dia G.I. Nipple-30 CM Long |
| 189 | 150 mm dia G.I. Nipple-60 CM Long |
| 190 | 150 mm dia G.I. Nipple-95 CM Long |
| 191 | 100 mm dia G.I. Nipple-30 CM Long |
| 192 | 100 mm dia G.I. Flange |
| 193 | 110 mm dia PVC Tail Pice With Flange |
| 194 | 110 mm dia PVC Elbow |
| 195 | 110 mm dia PVC Equal Tee |
| 196 | 110 mm dia PVC Coupler |
| 197 | 65 mm dia GM FW Valve |
| 198 | M.S. Nuts & Bolts (16 & 12 mm) |
| 199 | 75 mm dia PVC Tee |
| 200 | 75 mm dia PVC Bend |
| 201 | 75 mm dia PVC End Cap |
| 202 | 75 mm dia PVC Tail Piece with flange |
| 203 | 75 mm dia PVC threaded adopter |
| 204 | Rubber Gusket Sheet 3 mm thick |
| 205 | Solvent Cement |
| 206 | Making & Supplying G.I. perforated medium quality Nipple with hole placing at 20 to 30 cm C/C at the two lines alternatively including supplying & fixing by welding at one end-with 40 mm dia G.I. Nipple Q - 12x2x0.45 m = 10.80 m |
| 207 | Sypplying of 65 mm dia G.I. Equal Tee |
| 208 | Supplying of G.I. end plug - 40 mm dia |
| 209 | Supplying of 65 x 40 mm dia G.I. Equal Reducing Socket. |
| 210 | Labour Charge for fotting fixing G.I. Specials worth G.I. perforated Pipes |
| 211 | Making perforations in aeration pipes of required sizes as directed by the department. |
| 212 | Supplying of river pea gravel of different sizes as mentioned below cleaning & washing the same to make it mud, dust and other foreign materials free including loading & unloading & stacking properly in the suitable site & placing inside the treatment plant as specified. (a) Size between 33 mm to 40 mm Q : 2 x 1.60 m x 1.25 m x 0.10 m = 0.40 cm |
| 213 | (b) Size between 25 mm to 35 mm Q : 2 x 1.60 m x 1.25 m x 0.10 m = 0.40 cm |
| 214 | (c) Size between 13 mm to 25 mm Q : 2 x 1.60 m x 1.25 m x 0.10 m = 0.40 cm |
| 215 | (d) Size between 7 mm to 12 mm Q : 2 x 1.60 m x 1.25 m x 0.10 m = 0.40 cm |
| 216 | (e) Size between 2 mm to 6 mm Q : 2 x 1.60 m x 1.25 m x 0.10 m = 0.40 cm |
| 217 | Supply of coarse sand of size 0.35 to .055 mm & uniformity coefficient 1.20 to 1.80 screened properly & free from any other foreign impurities including loading / unloading stacking properly at the suitable site and plaving inside the treatment plant as directed by the department. Q : 2 x 1.60 m x 1.25 m x 0.75 m = 3.00 cum |
| 218 | Providing, fitting, fixing iron sheet roofing (3 mm thick) including fitting transperant sheet over iron frame made of M.S. flat including fitting, fixing with nuts & bolts all complete as directed by the department. |
| 219 | Supplying, fitting, fixing specials such as short nipple, valves, elbow etc. as may be required for the work. |
| 220 | Supplying, fitting, fixing inposition 15 mm dia GI pipe including fitting, fixing specials such as bends, tees etc. all complete as directed. Considering 1.00 m length of GI pipe Cost of GI Pipe 1.00 m @ Rs. 79.20 / m = Rs. 79.20 |
| 221 | Construction of Hydrant pillars of size 13 cm x 13 cm 1.65 m (75 mm below GI) with C.C. 1:2:4 & reinforced with 4 Nos. 10 mm dia M.S. rodetc. All complete as directed. |
| 222 | Construction of plateform of size 1.20 m x 1.20 m with C.C. 1;2:4 placed over brick flat soling & 15 mm thick cement plaster 1:3 all complete as directed with neat cement finish. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
