|
| 1 | Structural Portion |
| 2 | Earth work in excavation of foundation tranches or drains in all sorts of soil…. As required complete. |
| 3 | Earth work in filling of foundation tranches … 150mm including watering and ramming. |
| 4 | Single layer brick flat solling of picked jhama bricks including raming and dressing. |
| 5 | Cement concrete with graded stone ballast 6:3:1 . |
| 6 | brick work in cement mortar (6:1 ) in foundation and plinth. |
| 7 | brick work in cement mortar (6:1 ) in super structure wall. |
| 8 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4). |
| 9 | Ordinary Cement concrete (mix 1:1.5:3) with graded stonechips (20 mm nominal size) . |
| 10 | Hire and labour charges for shuttering with centering and necessary staging etc. |
| 11 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. |
| 12 | 20 mm thick damp proof course with cement 1:1.5:3 with stone aggregate 10 mm. |
| 13 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).With 1:4 cement mortar & 10 mm thick plaster |
| 14 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).With 1:4 cement mortar & 15 mm thick plaster |
| 15 | With 1:6 cement mortar & 20 mm thick plaster inside wall |
| 16 | With 1:6 cement mortar & 15 mm thick plaster with sand. |
| 17 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels35 mm thick. |
| 18 | Neat cement punning about 1.5 mm thick in wall, dado. |
| 19 | Wood work in door and window frame fitted and fixed in position complete) Sal :Malayasian. |
| 20 | Supplying fitting fixing MS clamp 40 mm x 6 mm , 250 mm. |
| 21 | Iron butt hinges (100 mm x 58 mm x 1.9 mm) |
| 22 | Iron socket bolt 1.(225 mm long x 10 mm dia board) |
| 23 | Iron socket bolt 2.(150 mm long x 10 mm dia board) |
| 24 | Iron hasp bolt fitted and fixed complete 300 mm long. |
| 25 | Iron catch hook fitted and fix shutter 10 mm dia x 300 mm |
| 26 | Inodised aluminium D-type handle with continuas plate base hexagonal/round base.125 mm grip x 12 mm dia rod. |
| 27 | Supplying, fitting and fixing hinge cleat with 75 mm iron butt hinge. |
| 28 | Supplying, fitting and fixing buffer block. Sal |
| 29 | Panel shutters of door and window including fitting and fixing the same in position ordinary teak wood.40 mm thick shutter. |
| 30 | M.S. ornamental grill as per approved designjoints continuously welded with M.S. flats and bars.Grill weighing above 10 kg per sqm upto 16 kg per sqm. |
| 31 | White washing Three coats including cleaning and smoothening surface thoroughly . |
| 32 | providing decorative cement base paint Two coats. |
| 33 | Priming one coat on timber or plastered surface with synthetic oil bound primer ofaproved quality including smoothening surfaces by sand papering etc. |
| 34 | Priming one coat on steel surface . |
| 35 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc.including using of approved putty etc. on the surface, if necessary :@ On timbersurfaceTwo coats (with any shade except white) |
| 36 | On steel surface @Two coats (with any shade except white) |
| 37 | supplying fitting fixing UPVC pipe with all necessary plants nails including making holes in wall ( 110 mm dia) singla socketes 3 mt . |
| 38 | Construction of ramp. |
| 39 | Electrification (LS) |
| 40 | Furniture, Chair Table, 10% CP Lass & GST |
