|
| 1 | 1.1 :Earth work excavation in all soils (including refilling) a. 0 to 2 mt. |
| 2 | 1.5 : Earth work excavation for Open foundation (excluding refilling)a. 0 to 2 mt. |
| 3 | 1.6 : Earth work excavation for Open foundationfor drains (excluding refilling) widthupto 1.25 ma. 0 to 2 mt. |
| 4 | 1.8 : Earth work excavation for in SDR for Open foundation (excluding refilling) widthupto 1.25 ma. 0 to 2 mt. |
| 5 | 7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint |
| 6 | 13.1 : Filling with Excavated Earth |
| 7 | 41 : Painting - New \"iron work\" |
| 8 | 53.3 :C.I steps (5 kg) |
| 9 | 73.1: Supply & Fixing of 6 way three phase distribution board |
| 10 | 78 : Earthing Station IS3043 (Type I) |
| 11 | ANNEXURE-I2.1.3 : Filling sand (using crushed stone sand) |
| 12 | 3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand) |
| 13 | 6.2.1 : Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9\" x 4 1/2\"x 3\") (using crushed stone sand) |
| 14 | 8.1.1.1 : Standardised concrete Mix M20 Grade Concrete (using crushed stone sand)a) In Foundation and basement |
| 15 | f) In fourth Floor |
| 16 | 9.2.1 : Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9\" x 4 1/2\"x 3\")(using crushed stone sand)e. In fourth floor |
| 17 | 10.2.1 : Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9\" x 4 1/2\"x 3\") 114 mm tk (B.P.)(using crushed stone sand)a. In Foundation and basement |
| 18 | f. In fourth floor |
| 19 | 18.1 : Formwork using M.S.Sheetb.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works |
| 20 | 28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) Mixed with Super Plasticiser |
| 21 | 31.2.1 : Finshing the top of Terrace floor with one course of solar reflective Ceramic tiles without base concrete (using crushed stone sand) |
| 22 | 33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasriciser |
| 23 | 35.1.1 : Plastering 1:3, 12mm tk with WPC (using crushed stone sand) |
| 24 | 38.6 : One coat white cement for new walls and other similar works. |
| 25 | 38.7 : Plastic Emulsion PAINT including primer for outer walls |
| 26 | 43.1 : Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods. |
| 27 | 50.2.1 : Providing precast Kerb stone in C.C. 1:3:6,450 x 300 x 150mm (using crushed stone sand) |
| 28 | 50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand) |
| 29 | 53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight ) |
| 30 | 66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point. |
| 31 | 68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places. |
| 32 | 71.2.1 : Supplying and fixing of 63 AMPS Triple pole main switch. |
| 33 | ANNEXURE-II:A1: Run of 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. |
| 34 | A2:Drilling of 150mm dia deep borewell in hard rock including drilling of 180mm pilot bore well |
| 35 | A3: Supply and fixing of 160mm dia PVC end cap |
| 36 | A4: Supply and fixing of 20\" x 5\" foam sheet board with vinyl cutting letters |
| 37 | A5: Supply, delivery and fixing of 150mm OD of PVC casing pipe of 6kg/cm.Sq |
| 38 | A6: Supply and delivery of clear water vertical wet type 5HP submersible bore wellpump set(Duty 50 lpm x 175m) |
| 39 | A7: Supply and delivery of 3 HP Open well Submersible pump set (Duty 100 lpm x 50 m) |
| 40 | A8: Supply and fixing of MS fabricated DOL 5 HP panel Board for submersible pumpset with approved quality |
| 41 | A9: Supply and fixing of panel control board for 3HP open well submersible motor with two level |
| 42 | A10: Labour charges for the erection of submersible pumpset in borewell / openwellupto 5 HP |
| 43 | A11: Supply and fixing of 150mm dia MS bore well clamp set |
| 44 | A12) Supplying and fixing of 32mm dia adopter for connecting submerssible pumpset with UPVC pipe |
| 45 | A13: Supply and delivery 3 core of 4 sqmm Flat type copper cable |
| 46 | A14: Supply and fixing of 32mm dia UPVC pipe |
| 47 | A15: Supplying and fixing of following dia GI pipe \"B\" class with ISI in below ground levela) 32mm dia GI pipe |
| 48 | A16: Supplying and fixing of following dia GI pipe \"B\" class with ISI in above ground levela) 80mm dia GI pipe |
| 49 | b) 50mm dia GI pipe |
| 50 | A17: Supplying and fixing of following dia GI/GM specialsa) 80mm dia Elbow |
| 51 | b) 80mm dia Hex Nipple |
| 52 | c) 80mm dia union |
| 53 | d) 50mm x 32mm dia reducer |
| 54 | e) 50mm dia Elbow |
| 55 | f) 50mm dia Hex Nipple |
| 56 | g) 50mm dia union |
| 57 | h) 50mm dia bend |
| 58 | i) 50mmDia Tee |
| 59 | j) 50mm dia coupling |
| 60 | k) 80mm dia Gun Metal Non return valve |
| 61 | l) 50mm dia Gun Metal Non return valve |
| 62 | m) 80mm dia Gun Metal Gate valve |
| 63 | n) 50mm dia Gun Metal Gate valve |
| 64 | o) 32mm dia Gun Metal Gate valve |
| 65 | A18: Supplying and laying of following dia PVCPipe( 10kg for .per.cm2) in Below ground levela) 63mm dia pvc pipe |
| 66 | b) 50mm dia pvc pipe |
| 67 | A19: Supplying and delivery of PVC specialsa)63mm dia Elbow |
| 68 | b) 63mm dia Tee |
| 69 | c)50mm dia Tee |
| 70 | d) 50mm dia Elbow |
| 71 | e) 63mm x50mm dia reducer |
| 72 | f) 50mmx40mm dia reducer |
| 73 | A20: Supplying, delivering and fixing of 16mm thick Nylon Rope for bore well |
| 74 | A21: Supplying and fixing of Aluminium die casting letters including all cost of materials and labour charges.a) TNPHC emblem (2\") |
| 75 | b) 9\" dia letters |
| 76 | A22: Supply and fixing of TNEB meter board suitable for 3 phase 63A service connection |
| 77 | A23: Supplying of 3.5 x 70 Sq.mm PVC armoured LTUG Cable below ground level |
| 78 | A24: Supply and fixing of cable gland suitable for 3.5 x 70 sq mm PVC armored LTUG cable etc. |
| 79 | A25: Supply & Fixing of crimping Lugs suitable for 3.5 x 70 sq mm UG cable |
| 80 | A26: Supply and fixing of Horizontal type 4 way triple pole neutral |
| 81 | A27: Supply and fixing of 8 way SP DB of 16 A / way with 32 A DP switch with metal clad switch |
| 82 | A28: 100A Capacity Panel Board |
| 83 | A29: Supplying and fixing of 2\"x2\" 36W LED square / round surface panel light |
| 84 | A30: Supplying and fixing of 12\"x12\" 15W LED square / round surface light |
| 85 | A31: Supply and installation of AIR-CONDITIONER with copper coil of 2.0 TR Split Type AC Unit |
| 86 | A32:Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay |
| 87 | A33: Supply and laying of 5/8\" and 3/8\" copper pipe (Extrabeyond 3 metres supplied with AC unit) |
| 88 | A34: Supply and fixing of MS stand for fixing outdoor unit |
| 89 | A35: Supply and fixing of Matrix make eternity Pe6sp Model & Digital phone system confiquaration 8/3/27 trunk - 8lines & digtal operator port |
| 90 | A36: Supply and fixing of Matrix make Eon 510 digital key operator phone multi function |
| 91 | A37: Supply and fixing of cli 62sx calller id phone |
| 92 | A38: supply and fixingofDB box main of Pbx input all cable |
| 93 | A39: supply and laying of Finolex 2 pair cable (0.5mm) Intercom point end to end |
| 94 | A40: Supply and laying ofDlink cat 6 Lan cable end to end |
| 95 | A41: Supply and fixingofNet Work 6 u Model With Tray |
| 96 | A42: Supply and erection of IO box for RJ11 & RJ45 |
| 97 | A43: Supply and fixing of D-link 10/100 Desktop swich with hi-speed 24 port switch |
| 98 | A44: Supply and fixing of Finolex 20 pair telephone cable & accesseries |
| 99 | A45:Fixing of Installation of Lan intergeration charges of WAN/LAN |
| 100 | A46:Supply, Erection and Commissioning of 1No of Passengers lift (13 Persons - 884 Kgs.) with internal connections |
