Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-09-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-09-2021 |
| 2 | 30-08-2021 | Amendment 01 | Other | 06-09-2021 |
| Sl. No. | Item Description |
| 1 | DEMOLITION & DISMANTLING |
| 2 | Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and Removing Debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed. |
| 3 | Demolition Cement Concrete (un-reinforced) in any Position not otherwise specifically provided for and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed. |
| 4 | Demolition Cement Concrete (Reinforced) in any Position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed. |
| 5 | Demolition Brick Work or Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed. |
| 6 | Dismantling Timber Scantling 40 Sq Cm and Over in Section in Unframed Work, complete all as specified and as directed. |
| 7 | Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed. |
| 8 | Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) of any description, exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed. |
| 9 | Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed. |
| 10 | Dismantling Plain or Corrugated Steel Sheet or Galvalume Steel Sheet of any gauge and thickness, Serviceable Sheets keep in Safe Custody for Refixing, complete all as specified and as directed. |
| 11 | Dismantling Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards/ Slabs/ Blankets of any descriptions including Cover Fillets, complete all as specified and as as directed. |
| 12 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed. |
| 13 | Taking down Cement Plaster including Raking out Joints, Hacking for Key, Scrubbing down with Water and removing Debris, etc. etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed. |
| 14 | Hacking out Old Broken Glass (any thickness, size, quality or description) from Wooden or Metal Frame or Stone, Concrete or Brick surrounds including hacking out old Putty or removing Beads, etc., punching or drilling out old Glazing Pins/Spring Clips, complete all as specified and as directed. |
| 15 | Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. |
| 16 | Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. |
| 17 | Demolition & breaking up Drain/ Seware Pipe 100/110mm dia (Salt Glazed Ware, AC or Reinforced Concrete) including PCC Haunching (except Bed), set in Cement Mortar, complete all as specified and as directed. |
| 18 | Demolition & breaking up Drain/ Seware Pipe 150/160mm dia (Salt Glazed Ware, AC or Reinforced Concrete) including PCC Haunching (except Bed), set in Cement Mortar, complete all as specified and as directed. |
| 19 | EARTH WORKS |
| 20 | Excavating in Trenches, not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth; for Foundation, etc. or for Shafts, Wells, Cesspits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out in Soft/Loose Soil, complete all as specified and as directed. |
| 21 | Returning, filling in approved Soft/Loose Soil including spreading leveling, watering and well ramming in layers not exc. 25 Cm thick, complete all as specified and as directed. |
| 22 | Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point including spreading over ground, complete all as specified and as directed. |
| 23 | M&L Loose Filling with using Stone Aggregates of gauge 80mm to 150mm in Soakage Pits/ Soakage Wells, etc., complete all as specified and as directed. |
| 24 | REPAIRS TO DRAINS, COMPOUND WALLS, FENCING, SEWAGE, PLUMBING, SANITARY FITTING & MISC REPAIR WORKS |
| 25 | M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) in Surface Channels and Drains, etc. including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. |
| 26 | M&L Extra for Forming Fair finished Drain or Channel not exc. 30 Cm Inner Girth in Cement Concrete, using Extra Cement including Forms, Moulds, Stopped Ends, etc., complete all as specified and as directed. |
| 27 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. |
| 28 | M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) in Bed Blocks, Copings, Holdfast, etc., weathering slightly rounded or chamfered angle and throating, finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed.NOTE : Cost of Formwork is deem to be included in the Quoted Unit Rate. |
| 29 | M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) in Bed Blocks of Holdfast, etc., weathering slightly rounded or chamfered angle and throating, finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed.NOTE : Cost of Formwork is deem to be included in the Quoted Unit Rate. |
| 30 | M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Landings, Cover Slabs (for Manholes, etc.), Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and Similar Articles with Plain faces and setting in Cement Morter 1:4, complete all as specified and as directed.NOTE : Reinforcement will be Measured and Paid for separately under appropriate Items. |
| 31 | M&L Pre-cast Cement Concrete 1:3:6 (20mm graded stone aggregate) Block Masonry with Solid Blocks of size 300x200x200mm, exc. 10 Cm in width, Set in Cement Mortar 1:6, complete all as specified and as directed. |
| 32 | M&L Second Class Hardwood (well seasoned) Timber Scantlings, Over 40 Sq mm in Section as Unframed Work and fixed with Nails, complete all as specified and as directed. |
| 33 | M&L Second Class Hardwood (well seasoned) Plain Fillets, Wrought, Square, Rectangular or Triangular in Section, exc. 3.00 Sq Cm but not exc. 6.00 Sq Cm, fixed with Nails, complete all as specified and as directed. |
| 34 | M&L Second Class Hardwood (well seasoned) Plain, Solid, Straight, Chowkats and Frame, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue pinned at Joints, complete all as specified and as directed. |
| 35 | S&F Flush Shutter 30mm thick, Solid Core Construction, with Block Board Core and Plywood Face Panels, Commercial type on Both Sides including Teakwood Lipping 6.0mm thick, fixed with Nails, complete all as specified and as directed. |
| 36 | M&L Second Class Hardwood (well seasoned) Panelled Shutter 35mm thick (any number Panels) Plain, Framed with Lock Rails, having Panels of 12mm thick Veneered Particle Board medium density, Wood Particle Board with Commercial Face Veneers and fitted to Chowkat, complete all as specified and as directed. |
| 37 | M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 35mm thick, Open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars), Edges of Framing plain, chamfered or rounded. fitted with cut and mitred Beads for securing glass, etc.; sizes of Members of Shutters as specified inSSR Part I, Section 8, Clause 8.24(a) and fitted to Chowkat, complete all as specified and as directed. |
| 38 | M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 30mm thick, Open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars), Edges of Framing plain, chamfered or rounded. fitted with cut and mitred Beads for securing glass, etc.; sizes of Members of Shutters as specified inSSR Part I, Section 8, Clause 8.24(a) and fitted to Chowkat, complete all as specified and as directed. |
| 39 | M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 30mm thick, Divided into Squares, with plain, chamfered or rounded, mitred and rebated Sash Bars to receive Gauge/Glass, any numbers, sizes of Members of Shutter as specified in SSR Part-I, Section 8, Clause 8.24(b) and fitted to Chowkat, complete all as specified and as directed. |
| 40 | S&F Second Class Hardwood (well seasoned) Small Fittings such as Brackets of any type, Latch and Hinge Blocks, Shaped Door and Window Stops and the like, including all necessary Labours; Articles not exc. 200 Cu Cm Each, complete all as specified and as directed.NOTE : Butt Hinge will be Measured and Paid under appropriate Item as \"supply only\". |
| 41 | S&F Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in Opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed. |
| 42 | S&F Factory Made Solid PVC Moulded Door Shutter, 28mm to 30mm thick (Stiles), with 2, 4, or 6 Raised Panel design with 2.0mm thick Moulded PVC Sheet on the Front Face and 2.0mm Plain Colour PVC Sheet on Back Face, with Particle Board Core and fixing in Frame at Site as per Specifications & Drawing, complete all as specified and as directed. |
| 43 | S&F Aluminium anodised Barrel Tower Bolt, 125mm long, Extruded Section, complete all as specified and as directed. |
| 44 | S&F Aluminium anodised Barrel Tower Bolt, 150mm long, Extruded Section, complete all as specified and as directed. |
| 45 | S&F Aluminium anodised Barrel Tower Bolt, 150mm long, Extruded Section and Fixed-in-repairs, complete all as specified and as directed. |
| 46 | S&F Aluminium anodised Barrel Tower Bolt, 200mm long, Extruded Section, complete all as specified and as directed. |
| 47 | S&F Aluminium anodised Barrel Tower Bolt, 200mm long, Extruded Section and Fixed-in-repairs, complete all as specified and as directed. |
| 48 | S&F Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Section and fixing Bolts and Sliding Bolts of Extruded Section and Fixing-in-repairs, complete all as specified and as directed. |
| 49 | S&F Aluminium alloy, anodized, Sliding Door Bolt 300mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Section and fixing Bolts and Sliding Bolts of Extruded Section, complete all as specified and as directed. |
| 50 | S&F Aluminium alloy, anodized, Sliding Door Bolt 300mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Section and fixing Bolts and Sliding Bolts of Extruded Section and Fixing-in-repairs, complete all as specified and as directed. |
| 51 | Supply only Mild Steel Butt Hinge 50mm in size, medium weight, Cold Rolled, complete all as specified and as directed. |
| 52 | S&F Stainless Steel Butt Hinge 75mm in size (as approved), complete all as specified and as directed. |
| 53 | S&F Stainless Steel Butt Hinge 100mm in size (as approved), complete all as specified and as directed. |
| 54 | S&F Extruded Aluminium Alloy Handle 125mm, Fabricated type, anodised, complete all as specified and as directed. |
| 55 | S&F Extruded Aluminium Alloy Handle 125mm, Fabricated type, anodised and Fixing-in-repairs, complete all as specified and as directed. |
| 56 | S&F Extruded Aluminium Alloy Handle 150mm, Fabricated type, anodised, complete all as specified and as directed. |
| 57 | S&F Extruded Aluminium Alloy Handle 150mm, Fabricated type, anodised and Fixing-in-repairs, complete all as specified and as directed. |
| 58 | S&F Floor Door Stopper having Overall length of Cover Plate 140mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixed in Floor, complete all as specified and as directed. |
| 59 | S&F Floor Door Stopper having Overall length of Cover Plate 140mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixed in Floor and Fixing-in-repairs, complete all as specified and as directed. |
| 60 | S&F Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate, complete all as specified and as directed. |
| 61 | S&F Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and Fixing-in-repairs, complete all as specified and as directed. |
| 62 | S&F Door Closer Aluminium (Extruded Section) Body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram and Fixing-in-repairs, complete all as specified and as directed. |
| 63 | M&L Aluminum alloy Curtain Rails, anodised having 20mm Outer dia with Brackets, Side Holders and Rings, etc. and Fixing-in-repairs, complete all as specified and as directed. |
| 64 | S&F Aluminium anodised Hat & Coat Hooks of size 175mm to 250mm, Solid Body, fixing with Screws and Washer and Fixing-in-repairs, complete all as specified and as directed. |
| 65 | M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed. |
| 66 | M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and Fixing-in-repairs, complete all as specified and as directed. |
| 67 | S&F Sheet Glass3.0mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed. |
| 68 | M&L TMT Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 69 | M&L TMT Bars 8mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 70 | M&L Mild Steel Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes including Bolts, Hooks (Stay) for large Gates; Hook and Pintle Hinges: large Hasps and Staples; Hand Made Sliding Bolts; Clamps; Holdfasts; Wall Ties and similar small Articles conforming to Fe-290 Gde-E-165, complete all as specified and as as directed. |
| 71 | M&L Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed. |
| 72 | M&L Running Welding in repairs, Thickness of Metal to be welded not exc. 6.0mm, complete all as specified and as directed. |
| 73 | S&F Corrugated Mild Steel Sheeting 0.63mm thick, Galvanised @ 120 Gram Per Sqm, with Two Corrugation Side Lap, fixing with and including L-type or J-type Cranked Hook Bolts with Washer, etc., complete all as specified and as directed. |
| 74 | S&F Plain Mild Steel Sheeting 0.80mm thick, Galvanised @ 120 Gram Per Sqm, in Ridges, Hips, Valley Gutters, etc., fixing with and including L-type or J-type Cranked Hook Bolts with Washer, etc., complete all as specified and as directed. |
| 75 | M&L Re-fixing Corrugated or Plain Mild Steel Sheeting of any thickness (except Sheets, Serviceable Sheet obtained from Item No. 1.008 here-in-before) with Two Corrugation Side Lap, fixing with and including L-type or J-type Cranked Hook Bolts with Washer, etc., complete all as specified and as directed. |
| 76 | S&F Plywood Board 6.0mm thick, Grade BWP, Type BB, fixing with Mild Steel Screws to Timber Frame Work in Ceiling, Flat or Sloping as in Walls, etc., complete all as specified and as directed. |
| 77 | M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick in Floors, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed. |
| 78 | M&L Glass Dividing Strips 38x3.0mm thick, inserted in Position, conform to Design, complete all as specified and as directed. |
| 79 | M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Floors as Base Course to lay Tiles, etc., finished Concrete Surfaces Fair and Even, complete all as specified and as directed. |
| 80 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed. |
| 81 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Rectangular/ Square), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate |
| 82 | M&L Vitirified Ceramic Tiles 10mm thick (Square/Rectangular) in Light shade, Polished, Area of Each Tile not exc. 0.36 Square Metre in Floors, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate |
| 83 | M&L Vitirified Ceramic Tiles 10mm thick (Square/Rectangular) in Light shade, Polished, Area of Each Tile not exc. 0.36 Square Metre in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate |
| 84 | M&L Glazed Ceramic Coloured Tiles 300x450x7.0mm thick (1st quality as approved) in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate |
| 85 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 100mm thick in Paths, Hardstanding, etc. Laid in Alternate Panels, finished Concrete Surfaces Fair and Even, complete all as specified and as directed. |
| 86 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-Base to Paths, etc. complete all as specified and as directed. |
| 87 | M&L Chequered Cement Concrete Coloured (Terracota Red or Yellow) Tiles 200x200x25mm thick, Set and Jointed in Neat Cement Slurry in Floors and Pointed in Grey Cement, laid over and including 15mm thick Cement Screed Bed in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate |
| 88 | M&L Rendering 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 89 | M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Fair and Even, complete all as specified and as directed. |
| 90 | M&L Rendering 15mm thick on Brick/PCC Blocks or Concrete Works consist-ing in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/ Top layer 5.0mm thick in Cement Mortar 1:4 including mixeing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured and Paid seperately under appropriate Item. |
| 91 | Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed. |
| 92 | M&L Preparing Newly Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed. |
| 93 | M&L Preparing Newly Plastered Surfaces of Walls and applying Wall Care Putty 3.0mm thick in Two Coats (1.5mm thick Each Coat) on Plastered Surfaces of Walls including Cutting and Rubbing down to obtain a Even and Smooth Surface, complete all as specified and as directed. |
| 94 | M&L Applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Chalk Whitening (Priming Coat) on Putty Finished Surfaces, complete all as specified and as directed. |
| 95 | M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Chalk Whiting (Priming Coat), complete all as specified and as directed. |
| 96 | M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (as approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed. |
| 97 | M&L Preparing New Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade) over a Coat of Pink Primer, complete all as specified and as directed. |
| 98 | M&L Preparing New Wooden Surfaces of any description, not exc. 10 Cm in Width or Girth when unconnected with other Painting or when Painted in different Tint and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade) over a Coat of Pink Primer, complete all as specified and as directed. |
| 99 | M&L Preparing New or Previously Treated Surface of Wood and Wood based Materials of any description and girth and treated with Two Coats of Creosote Oil, complete all as specified and as directed. |
| 100 | M&L Preparing previously Untreated Surfaces of Wood and Wood Based Materials, of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Backs of Chowkats, etc. Area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed. |
| 101 | M&L Preparing previously Untreated Surfaces of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Holdfast or similar Small Items, Area tarred not exc. 0.10 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed. |
| 102 | S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. |
| 103 | M&L Re-fixing Steel Tubing 15mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 1.014 here-in-before) in New or Old Position (Walls, Ceiling, Floors, etc.) including Cleaning both Inner and Outer Surfaces of Pipes by using Wire Brush (before fixing/laying of Pipes) including Provision of New GI Fittings/ Connections (as required at Sites), complete all as specified and as directed. |
| 104 | S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. |
| 105 | M&L Re-fixing Steel Tubing 20mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 1.015 here-in-before) in New or Old Position (Walls, Ceiling, Floors, etc.) including Cleaning both Inner and Outer Surfaces of Pipes by using Wire Brush (before fixing/laying of Pipes) including Provision of New GI Fittings/ Connections (as required at Sites), complete all as specified and as directed. |
| 106 | S&F Bib Tap 15mm bore (dia) Cast Copper alloy, with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixing-in-repairs, complete all as specified and as directed. |
| 107 | S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixing-in-repairs, complete all as specified and as directed. |
| 108 | S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, screwed down, high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixing-in-repairs, complete all as specified and as directed. |
| 109 | S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down, high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixing-in-repairs, complete all as specified and as directed. |
| 110 | S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, Quarter Turn (Form Flow), screwed down, high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixing-in-repairs, complete all as specified and as directed. |
| 111 | S&F Stop Valve 15mm bore (dia), Cast Copper alloy, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed. |
| 112 | S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixing-in-repairs, complete all as specified and as directed. |
| 113 | S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, with Long Shank and Cup Concealed, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixing-in-repairs, complete all as specified and as directed. |
| 114 | S&F Angle Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down Ends for Iron Pipe or for Unions and Fixing-in-repairs, complete all as specified and as directed. |
| 115 | S&F Gun Metal Globe/Gate Valve 15mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixing-in-repairs, complete all as specified and as directed. |
| 116 | S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixing-in-repairs, complete all as specified and as directed. |
| 117 | M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule including Taking/ Lowering down unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 118 | M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule including Taking/ Lowering down unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 119 | S&F Plastic Top Cover Assembly suitable for Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top and Fixing-in-repairs, complete all as specified and as directed. |
| 120 | S&F Plastic Top Cover Assembly suitable for Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top and Fixing-in-repairs, complete all as specified and as directed. |
| 121 | S&F PTMT Ball Valve 15mm bore (dia), having weight not less than 142 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and Fixing-in-repairs, complete all as specified and as directed. |
| 122 | S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and Fixing-in-repairs, complete all as specified and as directed. |
| 123 | M&L Disconnecting all the Pipe Connections, Cleaning & Removal of all Scales, Dirts, etc. from the Tank of capacity exc. 250 Litre and not exc. 500 Litre and Mouths of Circulating Pipes, etc. Cleaning the Tank by scrubbing the deposits with Wire Brush after draining out Water from the Tank, Re-hoisting the Cleaned Tank in Original Position and Re-fixing/Re-connecting Inlet and Outlet Pipes and Writing Letters \"CLEANED ON : DD.MM.YYYY\" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed. |
| 124 | M&L Disconnecting all the Pipe Connections, Cleaning & Removal of all Scales, Dirts, etc. from the Tank of capacity exc. 500 Litre and not exc. 1000 Litre and Mouths of Circulating Pipes, etc. Cleaning the Tank by scrubbing the deposits with Wire Brush after draining out Water from the Tank, Re-hoisting the Cleaned Tank in Original Position and Re-fixing/Re-connecting Inlet and Outlet Pipes and Writing Letters \"CLEANED ON : DD.MM.YYYY\" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed. |
| 125 | M&L Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, PVC (SWR) ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/ Distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed. |
| 126 | M&L Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/Distrubed Surfaces in Cement Mortar 1:3 and Fixing-in-repairs, complete all as specified and as directed. |
| 127 | S&F Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminium anodised Hinging Device and Fixing-in-repairs, complete all as specified and as directed. |
| 128 | S&F Health Faucet 2-in-1, Brass Chromium Plated with Inner Flexible Tube 1.20 Metre long (minimum Length) and Wall Hook and Fixed-in-repairs, complete all as specified and as directed. |
| 129 | S&F Toitet Paper Holder of size 150mm (as approved), Brass Chromoum Plated with Rod to hold Paper Roll and Fixing-in-repairs, complete all as specified and as directed. |
| 130 | M&L PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a Pair of Cast Iron Brackets Erecting Stand duly Painted, including PVC Flush Pipe 32mm dia with PVC Long Bend, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixing-in-repairs, complete all as specified and as directed. |
| 131 | M&L Vitreous China Wash Hand Basin of size 550x400mm, White (Flat Back) including Brass Chromium plated Waste Fitting 32mm bore (dia), PVC Waste Pipe 32mm/40mm and a Pair of Cast Iron Brackets or Erecting Stand duly Painted (but excluding Taps, Chain, Plug & Porcelain Stopper), Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 132 | S&F Vitreous China White Urinal, Half Stall type, Back or Corner Wall type, (excluding Flushing Cistern, Flush Pipe and Waste Pipe), complete including providing and fixing Plugs, Bedding Urinals against Wall in Cement Mortar 1:2, securing Urinal to Plug with and including 60mm long Brass Chromium plated Screws, Pointing around Urinal back in Cement Mortar 1:3, fixing Urinal Spreder of Brass Chromium plated, Flush Pipe, Grating and Union for Discharge Pipe (but Exclusive of fixing Supply Pipe to Flushing Cistern, Trap and Waste Pipe) and Fixing-in-repairs, complete all as specified and as directed. |
| 133 | S&F Waste Coupling 32mm bore (dia), Brass Chromium plated and Fixing-in-repairs, complete all as specified and as directed. |
| 134 | S&F Waste Fitting 32mm bore (dia), Brass Chromium plated, for Glazed Ware Sinks, Basins, etc., with long screwed Shanks and Fly-nuts, Flange End, Bedded in Red Lead Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 135 | S&F Brass Chromium plated Bottle Traps 32mm bore (dia) suitable for Wash Hand Basins with Inlet and Outlet, screwed for Pipe or Connections including necessary Packing, Uunion, Cap and Fixing-in-repairs, complete all as specified and as directed. |
| 136 | S&F PVC Waste Pipe 32mm bore (dia) of length not less than 800mm (as approved), suitable for Wash Hand Basin, Sinks, etc. and Fixing-in-repairs, complete all as specified and as directed. |
| 137 | S&F PVC Waste Pipe 40mm bore (dia) of length not less than 800mm (as approved), suitable for Urinals, etc. and Fixing-in-repairs, complete all as specified and as directed. |
| 138 | S&F PVC Connection Pipe 15mm in size and 450mm in length with PTMT Nuts and Fixed-in-repairs, complete all as specified and as directed. |
| 139 | S&F PVC Connection Pipe 15mm in size and 600mm in length with PTMT Nuts and Fixed-in-repairs, complete all as specified and as directed. |
| 140 | S&F Looking Mirror size 600x450mm, 5.5mm thick Selected quality Glass, Bevelled edge, mounted on 4.0mm thic PVC Sheet with PVC/PTMT Frame, fixed to Wooden Plug with Brass Chromium plated Screws and Fixing-in-repairs, complete all as specified and as directed. |
| 141 | S&F Glass Shelf Assembly (as approved) consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long and and Fixing-in-repairs, complete all as specified and as directed. |
| 142 | S&F PVC Mirror Cabine Box type of size 450x350x125mm for Toilet, Colured with Mirror of Selected quality Glass 4.0mm thick, mounted on Shutter fixing to Walls with and including Brass Chromium plated Screws (minimum 4 No.) and Fixing-in-repairs, complete all as specified and as directed. |
| 143 | S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), fixing to Walls with and includingChromium plated Brass Screws and Wooden/ Plastic Cleats and Fixing-in-repairs, complete all as specified and as directed. |
| 144 | S&F PTMT Towel Ring of PTMT having Minimum Weight 90 Gram (as approved), fixing to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixing-in-repairs, complete all as specified and as directed. |
| 145 | S&F Wall Mixer 3-in-1 with \"L\" Bend 115mm Long, Full System made of Brass Chromium Plated for mixing Hot & Cold Water suitable for Bathing/ Shower, screwed down for Iron Pipe or for Unions and Fixing-in-repairs, complete all as specified and as directed. |
| 146 | S&F Chromium Plated Shower Rose with Shower Arm 125mm, Swival Joint including fixing to Steel Pipe and Fixing-in-repairs, complete all as specified and as directed. |
| 147 | S&F Stainless Steel Soap Dish, not less than 125mm in size (as approved), fixing to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixing-in-repairs, complete all as specified and as directed. |
| 148 | M&L Stainless Steel Grating 125mm in dia (as approved) with Waste Hole, setting and Fixing-in-repairs, complete all as specified and as directed. |
| 149 | M&L Stainless Steel Grating 150mm in dia (as approved) with Waste Hole, setting and Fixing-in-repairs, complete all as specified and as directed. |
| 150 | M&L PVC (SWR) Floor Trap having Diameter of Outlet in 75mm, Plain with Grating Chromium plated including Jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 151 | S&F PVC (SWR) \"P\" Trap 110/110mm bore (dia), setting and jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 152 | S&F PVC (SWR) Gully Trap 125/110mm bore (dia), setting and jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 153 | S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floor or fixing to Walls, etc. including Taking down/ out Unserviceable Pipe of any description, complete all as specified and as directed. |
| 154 | S&F PVC (SWR) 75mm bore (dia) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings, jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 155 | S&F PVC (SWR) 75mm bore (dia) Branch Pieces, Single (Equal or Unequal), Ordinary or Inverted (Spigot or Socket type) or with Parallel Branches Fittings, jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 156 | S&F PVC (SWR) 75mm bore (dia) Junction, Single (Single T) Equal or Unequal, etc., jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 157 | S&F PVC (SWR) Vent Cowl 75mm bore (dia), jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 158 | S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floor or fixing to Walls, etc. including Taking down/ out Unserviceable Pipe of any description, complete all as specified and as directed. |
| 159 | S&F PVC (SWR) 110mm bore (dia) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings, jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 160 | S&F PVC (SWR) 110mm bore (dia) Branch Pieces, Single (Equal or Unequal), Ordinary or Inverted (Spigot or Socket type) or with Parallel Branches Fittings, jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 161 | S&F PVC (SWR) 110mm bore (dia) Junction, Single (Single T) Equal or Unequal, etc., jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 162 | S&F PVC (SWR) 110mm bore (dia) Reducer (as approved), Jointed with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed. |
| 163 | S&F PVC (SWR) Vent Cowl 110mm bore (dia), jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 164 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Concrete Bed to Drain Pipes of 110mm bore (dia) including Packing Under and Haunching against the Sides of Pipes after they are laid and tested; complete all as specified and as directed.NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items. |
| 165 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Concrete Bed to Drain Pipes of 160mm bore (dia) including Packing Under and Haunching against the Sides of Pipes after they are laid and tested; complete all as specified and as directed.NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items. |
| 166 | S&F PVC (SWR) 110mm bore (dia) Soil and Waste Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid in Trenches, complete all as specified and as directed.NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items. |
| 167 | S&F PVC (SWR) 160mm bore (dia) Soil and Waste Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid in Trenches, complete all as specified and as directed.NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items. |
| 168 | M&L Cutting into Existing Manholes for Connecting New Drain Pipes of 150/ 160mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed. |
| 169 | PERIODICAL SERVICES TO CERTAIN BUILDINGS |
| 170 | M&L Removing Plants, Weeds, etc. grown up on walls, Chajjas or any other Situation, Applying/ Spraying Weeds Control Chemicals using Glyco-sulphat (1 Part of Chemical & 19 Parts of Water) at the Rate of 3.00 Litre Per Square Metre, Removing Debris, etc. etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed. |
| 171 | M&L Preparing Old Treated Plastered Surfaces of Walls and applying One Coat of White Wash, complete all as specified and as directed. |
| 172 | M&L Preparing Old Treated Plastered Surfaces of Ceiling and applying One Coat of White Wash, complete all as specified and as directed. |
| 173 | M&L Preparing Old Treated Plastered Surfaces of Walls and applying One Coat of Colour Wash, complete all as specified and as directed. |
| 174 | M&L preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of Cement Base Paint (as approved Tint), complete all as specified and as directed. |
| 175 | M&L Preparing Old Distempered and Painted Surfaces of Walls by Washing, Rubbing down and Stopping of Surfaces and applying One Coat of Distemper Oil Emulsion (as approved Tint), complete all as specified and as directed. |
| 176 | M&L Preparing Old Painted Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint), complete all as specified and as directed. |
| 177 | M&L Preparing Old Painted Wooden Surfaces of any description, not exc. 10 Cm in Width or Girth when unconnected with other Painting or when Painted in different Tint and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint), complete all as specified and as directed. |
| 178 | M&L Preparing Old Painted Steel and Iron Surfaces of any description, over 10 Cm Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality / grade Paint of as approved Tint), complete all as specified and as directed. |
| 179 | M&L Preparing Old Painted Steel and Iron Surfaces of any description, not exc. 10 Cm in Width or Girth when unconnected with other Painting or when Painted in different Tint and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint), complete all as specified and as directed. |
| 180 | M&L Preparing Old Painted Steel and Iron Surfaces of Corrugated/ Plain Sheets in Roof Covering, Wall Cladding, over 10 Cm Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality / grade Paint of as approved Tint), complete all as specified and as directed. |
| 181 | M&L Preparing Newly Painted/ Treated Brick, Stone, Concrete, Asbestos Cement or Plaster Surfaces, Area not exc. 0.50 Sqm Each and applying One Coat of Synthetic Enamel Paint (Black/ Red or as approved Tint) as Base Surface Area for Writing Letters, etc. , complete all as specified and as directed. |
| 182 | M&L Stencil Writing Letters or Figures (Block. Roman, Italic or Indian) of height exc. 125mm and not exc. 200mm with White Synthetic Enamel Paint over Black Base Surfaces, complete all as specified and as directed. |
| 183 | M&L Stencil Writing Stops, Commas, Short Lines, Dashes, Hyphens, Brackets, etc. with White Synthetic Enamel Paint over Black Base Surfaces, complete all as specified and as directed. |
| 184 | CLEANING TO SEWAGE SYSTEMS |
| 185 | M&L Removing/Cleaning Blockage of Sewer Line 100/110mm bore (dia), manually by rodding from Manholes, Septic Tank, etc. and cleaning of Sewer Line by flushing with water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 186 | M&L Removing/Cleaning Blockage of Sewer Line 150/160mm bore (dia), manually by rodding from Manholes, Septic Tank, etc. and cleaning of Sewer Line by flushing with water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 187 | M&L Removing and/or Cleaning Blockage of WC by any means of Flushing with Water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto TWICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 188 | M&L Removing and/or Cleaning Blockage of Floor Trap, Nahani Trap, etc. by any means of Flushing with Water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto TWICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 189 | M&L Cleaning GULLY TRAP, Depth not exc. 0.50 METRE by opening Cover and taking out accumulated Garbage, Brick Bats, Silts or any other Items, re-fixing the Cover after cleaning of Gully Trap, removing and carrying Brick Bats, Garbage, Silts, etc. to a distance exc 50 Metre but not exc 100 Metre and burried (minimum 300mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative upto TWICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted UNIT RATE. |
| 190 | M&L Cleaning MANHOLE, Depth not exc. 0.50 METRE, by opening Cover and taking out accumulated Brick Bats, Garbage, Silts or any other Items, re-fixing the Cover after cleaning of Manhole, removing and carrying Brick Bats Garbage, Silts, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 300mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative upto TWICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted UNIT RATE. |
| 191 | M&L Dewatering Sewage Water and Taking out accumulated Night Soils, Sludges, Brick Bats or any other Materials mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank (minimum 2000 Litre capacity) from MANHOLES, SEPTIC TANKS, etc., (Depth not exc. 1.50 METRE) as required to keep Complete Sewage System Functional and To avoid any Over Flowing including Removal and Dispossed off pumped out Sewage Water, Sludges in any form or any other Materials, etc. to Outside of Defence Land to a distance exc. 500 METRE and not exc. 1.00 KM and burried Under Ground (minimum 300mm covered with Soils over Two layers of Bamboo Matting without maintaining gap), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit as ordered by JE and/or Engineer-in-Charge so as to keep the Whole Station Area Pollution Free, complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative only ONCE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) Each Trip of Tanker to be taken Outside of MD Land in presence of JE in-Charge.(c) Cost of Bleaching Powder, Bamboo Matting, all necessary Earth Works, any other Materials and T&P, etc. as required for Cleaning and Removal will deem to be included in the Quoted UNIT RATE. |
| 192 | M&L Dewatering Sewage Water and Taking out accumulated Night Soils, Sludges, Brick Bats or any other Materials mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank (minimum 2000 Litre capacity) from MANHOLES, SEPTIC TANKS, etc., (Depth exc. 1.50 METRE but not exc. 3.00 METRE) as required to keep Complete Sewage System Functional and To avoid any Over Flowing including Removal and Dispossed off pumped out Sewage Water, Sludges in any form or any other Materials, etc. to Outside of Defence Land to a distance exc. 500 METRE and not exc. 1.00 KM and burried Under Ground (minimum 300mm covered with Soils over Two layers of Bamboo Matting without maintaining gap), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit as ordered by JE and/or Engineer-in-Charge so as to keep the Whole Station Area Pollution Free, complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative only ONCE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) Each Trip of Tanker to be taken Outside of MD Land in presence of JE in-Charge.(c) Cost of Bleaching Powder, Bamboo Matting, all necessary Earth Works, any other Materials and T&P, etc. as required for Cleaning and Removal will deem to be included in the Quoted UNIT RATE. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
