Military Engineer Services-MES has published Repair / Replacement Of Flooring, Roofing, Ceiling, Wall Panelling And Allied Works At Zakhama Mil Stn Repair / Replacement Of Flooring, Roofing, Ceiling, Wall Panelling And Allied Works At Zakhama Mil Stn. Submission Date for this Tender is 09-09-2021. Shed Construction Tenders in ZAKHAMA Nagaland. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Sep-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-09-2021 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land at the location decided by the Engineer-in-charge complete all as specified andas directed. |
| 2 | M&L for 25mm thick type B-1, (1 : 2 : 4) (using 12.5mm graded stone aggregate) as in sub-base to receive floor finishes.complete all as specified andas directed. |
| 3 | M&L for 75 mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) complete all as specified and directed. |
| 4 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. and removing debries outside MD land at the location decided by the Engineer-in-charge complete all as specified andas directed. |
| 5 | M&L for brick work with sub class "B" bricks straight or curved on plan exc 6 m mean radius, built in Cement Mortar (1:6), complete all as specified and directed. |
| 6 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and and removal of debris out of MD land at the location decided by the Engineer-in-chargecomplete all as specified andas directed. |
| 7 | M& L for Rendering 15mm thick on fair faces ofbrick work or concrete surfacesin Cement Mortar (1:4) and even and smoothwithout using extra cement.complete all as specified and directed. |
| 8 | M& L for Rendering 15mm thick on fair faces ofbrick work or concrete surfacesin Cement Mortar (1:6) and even and smoothwithout using extra cement.complete all as specified and directed. |
| 9 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing coat) removing serviceable tiles to store and removal of rubbish out side MD land at the location decided by the Engineer-in-charge complete all as specified andas directed. |
| 10 | M&L non-skidjoint free coloured ceramic tiles 7 to 8mm thickarea of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed of cement mortar in (1:6),complete all as specified andas directed. |
| 11 | M&L for Non skid ceramic colored tiles 7to8mm thick,as in skirting/dado laid and jointed in neat cement slurry and pointed in coloured cement to match complete, over and including 10mm thick backing coat in cement mortar (1:4) including triangular filleting on top incement mortar (1:4) complete all as specified and as directed. |
| 12 | M&L non-skidjoint free coloured ceramic tiles 7 to 8mm thickarea of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over and including 15 mm thick screed bed of cement mortar in (1:6),complete all as specified andas directed. |
| 13 | M&L glazed ceramiccoloured tiles in vertical surfaces 300 x 200 x 7mm thick set and joinded in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in cement mortar (1:4) including triangular filleting on top incement mortar (1:4) complete all as specified and as directed. |
| 14 | M & L for Dora stone tiles 300mmX300mmX10mm to 15mm thick, set jointed and pointing in neat cement slurry in floor including 20 mm thick screed bed in cement Mortar (1:6) complete all as specified and directed. |
| 15 | Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins etc. over 40 sq cm in section unframed work complete all as specified and as directed. |
| 16 | Dismantling boarding,any description, fixed in any position with nails.complete all as specified and as directed. |
| 17 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets.complete all as specified and as directed. |
| 18 | M & L for II nd class hard wood scantlings, wrought, fixed as in girders, wall plates, purlins, rafters, fixed with nails complete all as specified and as directed. |
| 19 | S&F for 4mm thick,plywood, grade BWR,type BB, fixed with nails to timber frame work fixed in wall.complete all as specified and as directed. |
| 20 | All as per item S No 19 above but on ceiling |
| 21 | Dismantling fillets,rails,posts,rafters,purlins, etc. under 40 sq.cm in section and unframed work. complete all as specified and as directed. |
| 22 | M&L for II nd class hard wood, wrought swan, plain fillets,square,rectangular or triangular in section, se-cured with nails or brads ( sectional area Exc 13 & n exc 25 sq. cm). complete all as specified and as directed. |
| 23 | All as per item No 18 above but bull nosed,splayed,chamfered or rounded on one edge or face (sectional area 6 & nexc 13 sq.cm) |
| 24 | M & L for 30mm tick IInd class hard wood plained one side, with butt jointes and fixed with nails supplied and fixed complete all as specified and directed |
| 25 | M & L for preparation of new wooden surfaces and applying annd applying two coats of synthetic varnish over a coat of wood filler liquid transperant complete all as specified and directed. |
| 26 | Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including similar pattern roof covering.complete all as specified and as directed. |
| 27 | S&F Galvanized, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with L-type of J-type or cranked hook bolts and washers, in roofs, etc with grade of zinc coating 275complete all as specified and as directed. |
| 28 | Fixing Only Galvanized, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with L-type of J-type or cranked hook bolts and washers, in roofs, etc with grade of zinc coating 275 complete all as specified and as directed. (Note:-OldCGI sheets as retrived from respective item herein before in good condition shall be used with new fittings) |
| 29 | S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J type or cranked hook bolts complete all as specified and as directed. |
| 30 | S&F plain galvanised mild steel sheeting 0.63mm thick as in ridges hips, vally gutters drip and straight flashings(length and firth as fixed) with grade of zink coating 275 ,complete all as specified and as directed. |
| 31 | S&F II nd class hardwood boarding planned one side and edges tongued and grooved or rebated joints and fixed with nails of thickness 25mmto existing floors in patches, including cutting out, picing, heading joints etc. complete all as specified and as directed. |
| 32 | M&L for 18/19 mm thick Prelaminated Particle Board , interior grade, prelaminated one side with decorative choice lamination & other side balancig white lamination, fixed with screws for pelmet boxes.complete all as specified and as directed. |
| 33 | M&L for preparation of new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.complete all as specified and directed |
| 34 | M&L for preparation of old woodensurfaces and wood based materials of any description not otherwise described over 10 cm width or girth and applyingone coat of synthetic enamel paint complete all as specified and directed. |
| 35 | M& L for Preparing new zinc (or galvanised) surfaces to recieve painting , by coating with mordant solution including washing and cleaning etc and two coat of synthetic enamel paint over a coat of red oxided zinc chorome primer all as specified and directed |
| 36 | M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.complete all as specified and directed. |
| 37 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over coat of priemer paint on walls complete all as specified and directed. complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
