|
| 1 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 2 | M & L for providing PCC type B0, 1 : 2 : 4, (using 20 mm graded aggregate) as incoping, and the like including weathering, slightly rounded or chamfered angles and throating complete with using WPC. |
| 3 | Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc. |
| 4 | M & L for rendering 15mm thick internal surfaces on brick work in cm 1:6 in and finishing surfaces even and fair without using extra cement complete. |
| 5 | M & L for rendering 15mm thick in two layerson external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC. Note :- WPC measured and paid separatly |
| 6 | Supply only liquid water proofing compound (Make : Sika Latex Power) |
| 7 | M & L for 2 mm thick of Birlawhite putty/JK white wall care putty in two coats on new/old plastered surfaces and making the surface uniform & smooth on walls/ceilings. |
| 8 | M & L for preparation of old plasteredsurfaces and applying one coat of acrylic distemper on walls complete all as specified and as directed. |
| 9 | M & L for preparation of new plasteredsurfaces and applying two coat of acrylic distemper on walls complete all as specified and as directed. |
| 10 | M & Ltwo coat of cement base paint white or tinted on walls or fascia of roof or chajjas on new or old decorated prepared plastered/painted surfaces of bldg complete all specified & directed. |
| 11 | M & Lone coat of cement base paint white or tinted on walls or fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg complete all specified & directed. |
| 12 | Dismantling floor, hearth or wall tilling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises. |
| 13 | M & L for double charge vitrified tiles 8-10 mm thick light shade (square/ rectangular), area of each tiles not less than 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1:4 complete. |
| 14 | M & L for coloured Glazed ceramic tiles in vertical surface 450x300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed in CM 1:4 complete. |
| 15 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 16 | M & L Brick work using sub class old size bricks straightor curved on plan to any radius of half brick thick built in cement mortar 1:4 complete all as specified and directed. |
| 17 | M&L Brick work using sub class old bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 18 | M & L form work to soffits of suspended slabs such as roof slab, floor slab not exc 200 mm thick complete. |
| 19 | M & LRCC type B-1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns, and in shelves and the like complete. |
| 20 | M & L for Providing precast cement concrete type B-1 1:2:4 as in manhole covers including setting in cement mortar 1:4 |
| 21 | S & F of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete. |
| 22 | S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. |
| 23 | S & F as in repair of white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. (Make : Jaguar/Hindware) |
| 24 | S&F brass chromium plated health faucet 15 mm with flexible tube (1.5 m long) of stainless steel provided rubber hose and wall hook etccomplete as in repair all as specified.(Make : Jaguar/Hindware) |
| 25 | S & F of 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete.(Saint Gobain/ModiFloat) |
| 26 | S&F in repair 15 mm dia bore bib taps, brass chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 27 | S&F in repair 15 mm dia two way bib taps, brass fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. |
| 28 | S&F in repair 15 mm dia stop/angle valves, cast copper alloy, CP fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. |
| 29 | S & F in repairs CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete. |
| 30 | S & F of Male Brass Threaded Adaptor (MTA/ MBTA)or Feale Brass Threaded Adaptor (FTA/ FBTA) complete. |
| 31 | S & F of PVC connections 15mm size with PTMT nuts of length 600mm |
| 32 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors and connecting with manholes or disposal place. |
| 33 | S & F 110mm dia borePVC (SWR) bends with access door all as specified and as directed. |
| 34 | S & F 110mm bore PVC (SWR) vent cowl with rubber ring joints,fixed to pipes all as specified. |
| 35 | S & F of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete. |
| 36 | M & L Plain cement concrete type D-2 (1:4:8)using 40mm graded stone aggregate as in surface channel & drains complete |
| 37 | S & F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws,etc complete all as specified.Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item.(ii) Item shall be paid as per weight of aluminium section (iii)The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 38 | S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engr- in- charge. |
| 39 | S & F of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete. |
| 40 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size n. exc 0.50 Sqm each complete all as specified and directed by Engr-in-charge. |
| 41 | M & L for 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete. |
| 42 | M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces. |
| 43 | M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of pink oxide primer including preparation of new wooden surfaces. |
| 44 | S & F as in repairaluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified. |
| 45 | Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame). |
| 46 | M&L for mild steel TMT bars 10mm dia and over cut to lengh bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl ms wire not less than 0.9mm dia. |
| 47 | Ditto all as per item no 46 above but 6 and over in stirrups, spacers and binders complete. |
| 48 | M & L for RCC Type B-1, 1:2:4 using 20 mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete. |
| 49 | Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 50 | Dismantling ceiling and wall boards of any type or any thickness inclluding cover fillets compleate all as specified and directed |
| 51 | M & L for anodised aluminium snap grid frame work (600 x 600 mm grid) for false ceiling all as specified and as directed. |
| 52 | S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified. |
| 53 | Dismantling timber scantlings 40 sq. cm and over in section, in any position |
| 54 | Dismantling of asbestos cement corrugated sheets as in roof coverings complete all as specified and directed. |
| 55 | S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etcFe 410 W (Gde E - 250 quality). |
| 56 | M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors and similar work conforming to Fe.290.Gde-E-165 |
| 57 | M & L for Mild steel screw bolts (machine made) with hexagonal heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal nut, exc 5cm but n exc 10cm long dia of neck is exc 11 mm but n.exc 15 mm complete. |
| 58 | M & L for Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long dia of neck is exc 11 mm but n.exc 20 mm complete. |
| 59 | Providing precast cement concrete Type B-0 1:2;4 (using 12.50 mm graded aggregate) louvres and jallies, 25mm thick, including all mouldings but excluding frame and fixed in cement mortar 1:4 complete. |
| 60 | S & F Pre- painted green or TC red colour fibre reinforced cement non-asbestos sheet,eco freindly roofing sheet6 mm thick as per IS 14871: 2000, manufactured using autoclave technology as in roof covering, fixed with self drilling screw & EPDM washers complete as specified and directed. |
| 61 | S & F Pre- painted green or TC red colour fibre reinforced cement non-asbestos top ridge (NK 10) eco freindly, 6 mm thick as per IS 14871: 2000, manufactured using autoclave technology as in roof covering, fixed with with self drilling screw & EPDM washers complete as specified and directed. |
| 62 | M & L for machine pressed chequered cement concrete tiles 30cm x 30cm x 30mm thick with grey cement and pigment over 20 mm thick screed bed in cement mortar 1:4 complete. |
| 63 | M & L for 15- 18 mm Granite slab(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 64 | S & F Vitreuos china wash hand basin size 560x450mm oval shape incl brackets or fixed to walls with anchor fasteners all cutting for and pinning in end of brackets or erecting stand, and inclusive of fixing and supply and waste pipeand CP waste coupling32 mm dia complete fixed.(Make-Parryware/Hindware/Jaquar) |
| 65 | Supply & fix in repair brass chromium plated pillar tap swan neck long body fancy typefor wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete. |
| 66 | Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking creditand making good disturbed surfases of walls, floors, etc. |
| 67 | Taking down main switches/DB\"Salongwith existing board incl removing the same from site and making the good to the disturbed surface complete |
| 68 | Taking down existing sub main wiring of any size & type and description including removal of teak wood batten/pipe etc complete. |
| 69 | M&L for point wiring complete with PVC insulated unsheathed FR multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC concealed conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, nuetral and earth wire as specified in MES SSR Part I 1991 with terminal boxes concealed on wall, with modular inner & outer cover for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed. Make of Wire : polycab/havells/ PlazaNote: i)Rate of modular cover plates with frame and modular metal flush boxes are paid seperately in respected items. |
| 70 | One light/fan/bell point controlled by one No piano type switch5 AMPS single pole one way |
| 71 | One socket outlet 5/3 pin 5 AMPS controlled by one switch on the same board. |
| 72 | One socket outlet 5/3 pin 5 AMPS controlled by one switch onindipendent board. |
| 73 | One socket outlet 15 Amps independent with two single core 2.5 sqmm drawn through in and including PVC concealed conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified and directed |
| 74 | S & F in replacement of Modular switch piano type 10 Amps one way single pole 240 volts A.C complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint)) |
| 75 | S & F in replacement ofModular switch piano type 20 Amps complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint)) |
| 76 | S & F replacement of Modular socket outlet 10 Amps 5 pin 240 Volts multi socket for cell phone pin or 2 pin+ 3 pin complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint)) |
| 77 | S & F in replacement ofmodular socket outlet 20 Amps 6 pin 240 Volts twin socket heavy duty complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint)) |
| 78 | M&Lin replacement ofmodular white cover plate with frame 1/2 module. (Make-Crabtree/legrand/Indo Asian (Glint)) |
| 79 | M&Lin replacement of for modular white cover plate with frame 3 module(Make-Crabtree/legrand/Indo Asian (Glint)) |
| 80 | M&L in replacement of modular white cover plate with frame 8 module (Make-Crabtree/legrand/Indo Asian (Glint)) |
| 81 | M&L in replacement of modularmetal flush box for1/2 module .(Make-Crabtree/legrand/Indo Asian (Glint)) |
| 82 | M&L in replacement of modular metal flush box for 3 module (Make-Crabtree/legrand/Indo Asian (Glint)) |
| 83 | M&L in replacement of modular metal flush box for 8 module (Make-Crabtree/legrand/Indo Asian (Glint)) |
| 84 | S&Fin replacemebt of modular bell push large piano type single pole one way 240 volts A.C complete all as specified and directed. Make-Crabtee/legrant/Havells |
| 85 | S&Fin replacemebt of bell ding dong/ bell musical single phase 230 volts all as per specified.Make-Anchor/Havells |
| 86 | S&Fin replacemebt of Modular ceiling fan regulator suitable electronic rotary step type 100 Watt 2 module complete all as specified and directed. Make-Crabtee/legrant/Havells |
| 87 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISImarked for batten fitting complete all as specified |
| 88 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- MakeCrompton Greaves Cat part No CCS-100-20-65-HL2-DP-NWH 20Wor its equvalent in Philips, Havells. |
| 89 | S & F building security lightfitting 1 x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade G I bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line/buildingsMake:- Havells/Crompton/Bajaj. |
| 90 | S&FLED Recessed mounted bottom opening LED Cleanroom luminaire (2x2) CRCA powder coated housing, with longer life and less maintenance of 24 watt LED (2x2 ft) on ceiling lightcomplete fitting,including LED recessd in white , 230 volt energysaving , enviromental friendly , long life, corrosion resistant , impact proof, IP-54 suitable for ceiling completewith all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. Product code-CLEANLUX I - LCBOR-40-CDL of Crompton Greaves OR Equivlent of Havells/Bajaj/HPL |
| 91 | M&L for replacment of Sheet metal enclosure MCCB DBs, Triple pole & neutral vertical type 4 waywith 200 Amp rated bus bar double door suitable for 01 No incoming MCCB of125 Amp capacity and 12 Nos Out going MCB SPN/SP of 40-63 Amp complete all as specified and directed. Havells/ L&T/Legrand NOTE:- MCCB & MCB\"s are measured and paid in separate items and same make. |
| 92 | S & F for sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 93 | S & FforMCCB ,415 Volt, 4 pole rated capacity 125 Amps,breaking capacity 25 KA, complete all as specified and as directed. |
| 94 | S & F for MCB Single pole and neutral rated capacity 40-63 Amps, 240 Volts breaking capacity 10 KA, complete all as specified and as directed. |
| 95 | S & Ffor MCB Single pole rated capacity 6 to 40 Amps, 240 Volts breaking capacity 10 KA, complete all as specified and as directed. |
| 96 | M&L in replacement ofinvertor wiring with one single core pvc insulated of size 1 .5 sqmm unsheathed copper conductor 1100 volt grade multistandard complete all as specified and directed. Make : polycab /Havells/ Plaza . |
| 97 | M&Lin replacement of sub main wiring with two single core pvc insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 6 sqmm and incl drawn through and including non metalic rigid pvc conduit and couduit accesssories of 25 mm external dia and conduit accessories of ISI marks medium grade including 4.0 sqmm copper wire for earth continuity wire and connected of common earth dolly. Make of Wire : polycab/Havells/Plaza . Note:- One run of conduit two run of 6 sq mm copper conductor & one run of 4 sq mm copper conductor is measured as one unit. |
| 98 | M&Lfor Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of MES sch pt I testing on completion with & incl. 15 mm bore lightgrade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary excavation earth work complete. (GI pipe & GI wire beyond 7.5 mtr will be measured and paid respectively) |
| 99 | S & F lamp holder, PVC/ Polycarbonate type with back plate for batten/ angle fitting |
| 100 | S &F ceiling fan 1200mm sweep single phase,AC energy saving with Fan hook, clamp, necessary nuts, bolts, washer and suitable length mild steel down rod etc and writing MES No. complete all as specified & directedby Engr-in-Charge.Make : Havells/Bajaj,Crompton Greaves, Usha. Note:- Old U/S ceiling/Exhaust fan deposit to MES store. |
| 101 | M&L in replacement ofACwiring with two single core pvc insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 4 sqmm and incl drawn through and including non metalic rigid pvc conduit and couduit accesssories of 20 mm external dia and conduit accessories of ISI marks medium grade including 2.5 sqmm copper wire for earth continuity wire and connected of common earth dolly. Make of Wire :polycab /Havells/ Plaza . Note:- One run of conduit two run of 4 sq mm copper conductor & one run of 2.5 sq mm copper conductor is measured as one unit. |
| 102 | Supply & fixingSRCD DBOXX (socket residual current device) protected socket with steel enclosure of 25 Amp Capacity complete with all accossries and commissioning all as specified & directed by Engr-in-charge. |
| 103 | Supply and fixingreplacement ofPlastic Exhaust fans 250mm sweep ,Energy saving fans ,230V AC ,50 HZ Completed.Model No-VENTILAIR DX Make-Havells/Usha/Bajaj. |
| 104 | M&L in replacement ofXLPE insulated, armouredheavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm 3.5 core |
| 105 | Excavation in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in hard or dense soil & getting out complete all as per & directed. |
| 106 | Returning filling including spreading levelling watering & well Ramming in layers not Exc 25 cm complete all as spfd & directed. |
| 107 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. |
| 108 | M&L for bricks common burnt sub class B designation for protection of cable complete all as specified and directed. |
| 109 | M&L for natural local river sand for cable protection. |
| 110 | M&L for GI tubing 40/50 mm dia light grade with all fittings laid in trenches/making GI bracket of security lights/provn for ceiling fan ponit including bending of suitable size/support of UG cable as required at site as directed by Engr-in-Charge. |
