Council Of Scientific And Industrial Research-CSIR has published Rate Contract For Residential Campus Quarters, Buildings Maintenance At Csir-Neist, Jorhat Rate Contract For Residential Campus Quarters, Buildings Maintenance At Csir-Neist, Jorhat. Submission Date for this Tender is 31-08-2021. Building Work Tenders in CSIR-NEIST, JORHAT, ASSAM. Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and fixing particle board/block board shutters for cupboards including black enamelled M.S butt hings(75mm x 40mm x 1.12mm)6 nos. hinges(75mm x 40mm x 1.12mm) 6 nos.with necessary wood screws(fully panelled).(a) with Teak wood particle board(12mm thick) |
| 2 | Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)(b) 35mm thick |
| 3 | Providing, fitting and fixing Wire Gauge shutters using Stainless Steel. wire of I.S. designation 85G with wire of dia 0.56mm for doors, windows and clerestory windows including oxidised M.S. butt hinges (100mm x 58mm x 1.90mm). With 1st class Local wood (Hollock/ Bonsum) 30mm thick |
| 4 | Providing, fitting and fixing steel windows/ ventilators (openable) of standard rolled steel sections as per relevant I.S. code-1038 joints mitred and welded with 15mm x 3mm x 100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device and steel handles, peg stays of 300mm long etc. complete as per drawing including applying a priming coat of red-lead paint including removing old window |
| 5 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden beadings including necessary cutting of glass to required sizes. Area of glass panes exceeding 0.15sqm but not exceeding 0.52 sqm. 4.00mm thick |
| 6 | Plain Cement Concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing step, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete. (a) In prop 1cement: 3 sand :6 coarse aggregate by volume. |
| 7 | Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. Brick on flat soling. |
| 8 | Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed in superstructure above plinth level. In proportion 1:3 (1 cement : 3 sand) |
| 9 | 112mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level. In cement mortar in proportion 1:4 (1 cement : 4 sand) |
| 10 | 40mm thick cement concrete floor consisting of 25mm under layer of cement concrete in prop 1:3:6 (1 cement : 3 coarse sand : 6 coarse aggregate of 12.5mm and down) and 15mm thick wearing layer in cement concrete in prop. 1:1:2 (1 cement : 1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg per square metre of floor area, wearing layer is to be laid in panels including curing etc. complete as directed. |
| 11 | 15mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm in girth and finished even and smooth including curing complete as directed. In cement mortar 1:3 |
| 12 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC , i)Normal range (Sizes 300 mm x 300mm and above),(a)Orient made:Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate |
| 13 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).a) Normal rangeSomany/ Orient/Nitco/Asian Make ii) Of size 200mmx300mm and above. |
| 14 | Providing corrugated galvd. Iron sheet roofing of TATA shaktee / SAIL including fitting and fixing necessary galvd. J or L hooks, bolts and nuts 8mm dia with bitumen washer 25mm dia x 3mm thick and 1.6mm thick limpet washer complete excluding cost of roof truss , purlin etc. 0.50 mm thick. |
| 15 | Labour for fitting and fixing galvd corrugated iron roofing including supplying and fixing with new galvd screw J hook, bolts, nuts washer etc. complete as directed. |
| 16 | Labour for taking out and refitting galvd ridging including supplying and fixing necessary galvd screw, bolts and nuts complete as directed. |
| 17 | Providing two coats of Birla White Wall Care Putty (Wall resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with suffucient quantity of clean water as specified and directed by the department. Thickness = 1.0mm |
| 18 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint / Berger Paint/ ICI paint/ J&N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping.. High Gloss paint. |
| 19 | Painting one coat (excluding priming coat) on old wood and wood based surfaces with enemel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping. Surfaces over 100mm in width or girth. High Gloss. |
| 20 | Painting one coat (excluding priming coat) on old wood and wood based surfaces with enemel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping. Surfaces up to 100mm in width or girth. High Gloss. |
| 21 | Supplying, fitting and fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete (anodised to bright natural matt & satin finished) |
| 22 | ( c) (ii) Door Handles.100mm |
| 23 | ( c) (iii) Door Handles.150mm |
| 24 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b)Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)(For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. |
| 25 | Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in : Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties, (ii) Using 25mm thick plank |
| 26 | Brick-on-edge floor with 1st class brick and grouted with cement mortar in prop 1:4 (1 cement : 4 sand) including cement pointing in proportion 1:1 ( 1 cement : 1 sand) finishing and curing complete. |
| 27 | Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Executive Quality with white cement |
| 28 | Supplying fitting and fixing 3mm thick Aluminium Plain Sheet including nails screws etc. complete as directed. |
| 29 | Providing, fitting and fixing anodised aluminium fixed windows and ventilators of standard sections of approved brand, joints mitred welded (manufactured to relevant I.S. specification) fitted with glass panes of required thickness and 12mm prelaminated boards and providing and fixing handles, angle cleat, rubber gusket,rollerbolting device, screwsas required complete as specified and directed for all levels. |
| 30 | Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium framemade of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels.6mm clear glass |
| 31 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished(m) 100mm(Godrej with handle (6 lever) |
| 32 | Providing, fitting and fixing fly proof Stainless Steel wire gauge of IS designation 85 G with wire of dia. Of 0.56mm to windows and clerestory windows including timber beading of size 50mmx20mm complete. With 1st class local timber bead |
| 33 | Providing and fixing one side teak veneered particle board lining with butt joint leaving a gap of 10mm as perdrawing including fitting and fixing with countersunk screws with the frame work complete as specified and directed at all levels(frame work to be measured and paid separately). |
| 34 | Wall painting (two coats) with Plastic emulsion paint of approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. .Plastic Emulsion Paint of approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) |
| 35 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) |
| 36 | Providing corrugated galvenised Iron sheet roofing of TATA SHAKTEE / SAIL including fitting and fixing necessary galvenised J or L hooks, bolts and nuts 8 mm dia with bitumen washer 25 mm dia x 3 mm thick and 1.6 mm thick limpet washer complete excluding cost of roof truss, purlin etc. (Roof trusses and purlin etc.to be measured and paid separately). (a) 0.45 mm thick |
| 37 | Providing galvd iron ridging of TATA SHAKTEE / SAILincluding supplying and fixing necessary galvd screws/washers etc. complete as directed.(a) 0.45 mm thick (i) 150 mm lapping |
| 38 | Taking out from position and repairing wooden door and window shutters by plaining the the sides, oiling the hinges, repairing the handles and bolts etc. And again refixing to position. |
| 39 | Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. |
| 40 | a) M. S. Angles……. |
| 41 | b) M. S. Flats……. |
| 42 | c) M. S. bolts & nuts……. |
| 43 | Supplying , fitting and fixing galvanised barbed wire fencing with seven strands of barbed wire 12 S. W. G .x 2plies x4 points at 75mm apart with angle iron intermediate fencing posts not more than 1800mm apart andstraining and end post etc. as necessary to be fitted with straining eye bolts and staples etc.complete as directed, specification of the angle iron post as given below. a) Intermediate post 35mm x35mm x5mm x1800mm long bottom torched and duly slotted. b) Straining post 65mm x 65mm x 6mm x1820mm long with 2 stays of 35mmx35mmx1520mm long and 3 base plates 200mm x 200mm x 5mm, duly slotted to take eye bolts etc. c) Corner posts65mm x 65mm x 6mm x1820mm long with 2 stays of35mm x 35mm x 5mm x 1 670 mm and 3 base plates200mm x 200mm x 5mm,dulyslottedtotake eye bolts etc. d) Straining or end posts 65mmx 65mm x 6mmx 1820mm long with 1 stays of35mm x 35mm x 5mmx 1820 mm long withbase plates 200mmx 200mm x 5mm,dulyslotted to take eye bolts etc. |
| 44 | Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are tobe protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessarylocking arrangement on both faces, arrangement for temporary closing the gateand 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts). |
| 45 | Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. |
| 46 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. |
| 47 | Taking out from position and repairing steel window shutters including steel frames at all levels after cutting out the heavily rusted and damaged portion of the shutters and frames and welded with the new "Z" section of steel members, corner, hinges, stay etc. including fitting and fixing in position and riveting with new rivets adjusting, cleaning, cutting the holes and making good the damages to metal with existing one. Window grills to be removed during carrying out the work and to be re-fixed in position after completion of work. The glass panes damaged during execution should also be changed. |
| 48 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city |
| 49 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately), (I) Using Mixer Machine, (A) In substructure up to plinth level, Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser, b) M20 grade concrete or Prop. 1:1.5:3 |
| 50 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). |
| 51 | Brick work in cement mortar with old brick including racking out joints, cleaning of old bricks and curing complete as directed. In proportion 1:4. |
| 52 | Supplying and installation of Vitreous China wash basin with pedestral, including CP waste coupling, CP Pillar Cock, CP Angle Cock, PVC Connection Pipe, PVC waste pipe etc. including painting of fittings and brackets, cutting and making good the walls wherever required |
| 53 | Providing wood work in frame of false ceiling partitions etc.sawn, wrought, framed hoisted and fixed in positon with spikes, nails, M.S flat,angle/ cleats with bolt and nuts complete including kiricide oiling two coats to unexposed surfaces of the timber (M.S flats, angle cleats, and bolt and nuts required for flat, angle cleats wherever necessary shall be measured and paid separately)(b)With Gamari/ Bonsum/ Sundi |
| 54 | Providing, fitting and fixing in position false ceiling of 6mm thick Bison panel (cement bonded particle board) on timber frame of 1st class local wood (Hollock/ Bonsum/ Sundi) of50mm x 50mm spaced at not more than 1.20m apart , fixed to the wall at the end with necessary nails, wood screws, hooks,bolts etc. including painting (one coat primer and two coats of painting) as necessarycomplete as directed by the Department for all levels.A) 6mm thick Plyboarda) On one face of the frame |
| 55 | Providing,fitting and fixing Door closer of various type UL listed and fire rated good quality depending on the door specification.Types like single speed,Double Speed,Heavy Duty etc are available and as directed & specified by the department.Double Speed Door Closer( size 140mm x 39mm x 60mm) |
| 56 | Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ).n) Mortice lock vertical type[19.80 % below (s.o.r.) i.e of Rs 1362.69] |
| 57 | Providingfitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)Indian type W.C Orissa pattern of size 580 x 440 mm , a) White, i) Parryware make |
| 58 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately), A) Parryware make, a) White, (viii) Petite (S/P) (Cat No.C0287/88) (inclusive of seat cover) |
| 59 | Supplying, fiting and fixing PVC flushing cisternwith all internal fittingswith CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately), i) Parryware make, a) White, (viii) Tiger (Cat No.C8260) |
| 60 | Providing vitreous Chinawash basinwith CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately), Basin (without pedestal), (B) Hindware Make, (a) White, (ii) Cute (Cat. No.10053) |
| 61 | Providing fitting & fixingstainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipeetc. complete includingpainting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately, (A) Parryware Make, (vi) Single Bowl (160 x 180) Flat Edge - Glossy (Cat.No.C8538) |
| 62 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. |
| 63 | Providing fitting and fixing Glass Shelf complete as directed and specified. Glass shelf with C.P. guard rail, (ii) Sona make (Cat. No.TR-0701), (a) 450mm |
| 64 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make, (ii) Wall Soap tray (Cat. No.C9951) |
| 65 | Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels. |
| 66 | Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make , (i) Towel rail Diplomat 300mm long (Cat.No.TR-0605) |
| 67 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make , (i) Towel ring round (Cat.No.TR-06051) |
| 68 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. |
| 69 | (i) 160mm dia. |
| 70 | (ii) 110mm dia. |
| 71 | (iii) 90mm dia. |
| 72 | (iv) 75mm dia. |
| 73 | (v) 63 mm dia. |
| 74 | (vi) 50mm dia |
| 75 | Supplying fiting and fixing 87.5 degree PVC bendwith doorof (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. |
| 76 | (i) 160mm dia |
| 77 | (ii) 110mm dia. |
| 78 | (iii) 90mm dia. |
| 79 | (iv) 75 mm dia. |
| 80 | (v) 50mm dia |
| 81 | Supplying fiting and fixing PVCsingle tee with door of(Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. |
| 82 | (i) 160mm dia |
| 83 | (ii) 110mm dia. |
| 84 | (iii) 90mm dia. |
| 85 | (iv) 75 mm dia. |
| 86 | (v) 50mm dia |
| 87 | Supplying fiting and fixing PVCsingle ‘Y’ with door of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. |
| 88 | (i) 110mm dia. |
| 89 | (ii) 75 mm dia. |
| 90 | Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. |
| 91 | (i) 160mm x 110 mm |
| 92 | (ii) 160 mm x 90 mm |
| 93 | (iii) 110 mm x 90 mm |
| 94 | (iv) 110 mm x 75mm |
| 95 | (v) 110mm x 63 mm |
| 96 | (vi) 90 mm x 75 mm |
| 97 | (vii) 90 mm x 63 mm |
| 98 | (viii) 75 mm x 63mm |
| 99 | Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. |
| 100 | (i) 160mm x 110 mm |
| 101 | (ii) 110 mm x 90 mm |
| 102 | (iii) 110 mm x 75mm |
| 103 | (iv) 90 mm x 75 mm |
| 104 | (v) 90 mm x 63 mm |
| 105 | (vi) 75 mm x 63 mm |
| 106 | Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. in exposed surface or trencesas necessary complete at all levels including below G.L. as directed and specified. |
| 107 | (a) 110 mm |
| 108 | (b) 75 mm |
| 109 | Providing fitting and fixing 50mm dia. HCI cowel with cement caulking complete as directed and specified. |
| 110 | Providing fitting and fixing PVC cowel of ISI make completeas directed and specified. |
| 111 | (i) 160mm dia. PVC cowel of ISI make |
| 112 | (ii) 110mm dia. PVC cowel of ISI make |
| 113 | (iii)90mm dia. PVC cowel of ISI make |
| 114 | (iv) 75mm dia. PVC cowel of ISI make |
| 115 | (v) 63mm dia. PVC cowel of ISI make |
| 116 | Providing fiting & fixingC.I. Grating to the floors complete asdirected and specified.(a) 110mm dia |
| 117 | C.P. Grating |
| 118 | (i) 160mm dia |
| 119 | (ii) 110mm dia |
| 120 | (iii) 75mm dia |
| 121 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary "R" brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified.(A) Exposed on walls, ii) Using other ISI marked approved brand |
| 122 | d) 25 mm dia (Medium) |
| 123 | e) 20mm dia (Medium) |
| 124 | f) 15 mm dia (Medium) |
| 125 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Agmeco brand, (i) Bib Cock without Flange CAT No.CC 00204/CAT No.CN 00204 |
| 126 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately), Agmeco Brand, (a) 15mm dia(Male/ Female ) |
| 127 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately)(d) Hammer shower with arm |
| 128 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes, 500 litre capacity, (b)Polycon make |
| 129 | Labour for erectingand placing PCVCTankover the stagging of 5.00m up to 8.00m complete as directed.(d) 500 litre capacity |
| 130 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil |
| 131 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. |
| 132 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panelsincluding curing complete as directed. (a) 15 mm thick |
| 133 | Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thickcement plaster 1:3 (1 cement : 3 coarse sand)and jointedwith grey cement slurry mixed with pigment to match theshade oftheslabsincludingrubbing and polishing complete, (1) 550mm x 550mm |
| 134 | Providing Pre Painted Galvanized IronSheetRoofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement, (i) 0.40 mm thick |
| 135 | Providing, fitting and fixing M.S. round bars with M.S. flat stiffeners at required spacing in wooden frames of windows and clerestory windows |
| 136 | (a) Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete. |
| 137 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.(i).Surfaces over 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 138 | Structural steel work in sigle sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. c) In M.S. angles, channels, Tees etc. |
| 139 | Providing, fitting, hoisting and fixing of roof trusses fabricated out ofcombination of anytwo or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. b) Using other ISI marked approved brand tube |
| 140 | Demolishing plain cement concrete including disposal of debris as directed for all levels, (ii) Prop (1 : 3 : 6) or richer mix |
| 141 | Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels |
| 142 | Extra for cutting reinforcement in RCC or RB work at all levels (Payment to be made on cross sectional area of RCC or RB work obtained by multiplying the length of the cut reinforcement and thickness of the member). |
| 143 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire withnecessary shuttering , curing etc. completeincluding fixing in position as directed. b) 75mm thick slab |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
