|
| 1 | Form work in centering and shuttering incliding strutting,propping etc. and removal of form for i) Suspended floors, roofs,landing ,balconies and access platform. |
| 2 | ii) Columns, pillars, piers, abutment posts and struts. |
| 3 | iii) Lintels,beams,plinth beams,girders,bressumers and cantilevers |
| 4 | iv) Edges of slabs and breaks in floors and walls |
| 5 | Reinforced cement concrete work in beams,suspended floors,roofs having slope up to 15® landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness)including attached pilasters, buttresses,plinth and string courses, fillets,columns, pillers,piers, abutments, posts and struts etc. Above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcementwith 1:1.5:3 ( 1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) |
| 7 | Steel reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete upto above plinth level |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in cement mortor 1:6 (1 cement :6 corase sand) |
| 9 | Half brick masonry with common burnt clayF.P.S(non modular) bricks of class designation7.5 in superstructure, above floor five level in cement mortor 1:4 ( 1 cement : 4 coarse sand) |
| 10 | Providing wood work in frames of doors, wondows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length(hold fast lugs or with dash fasteners shall be paid for separately).Sal Wood |
| 11 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory wondows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in- charge.Second class teak wood 35mm thick shutter |
| 12 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for door, windows and clerestory wondows with butt hinges andnecessary screws. 35mm thick shutters with ISI marked M.S. Pressed butt hinges bright finished of required size second class teak wood . |
| 13 | Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts,nuts and wooden plugs and embedding in cement concrete block30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand:6 graded stone aggregate 20 mm nominal size). |
| 14 | Providing and fixing M.S grills of required pattern in frmaes of windows etc. with M.s Flats, square or round bars etc. including primimng coad with approved steel primer all complete. Fixed to opening wooden frames with rawls plugs screws etc. |
| 15 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing,staircase railing and similar works, including applying priming coat of approved steel primer.M.S. Tube |
| 16 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts and screws etc. Complete.250x16mm |
| 17 | Providing and fixing aluminium tower bolts,ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with necessary screws etc. complete.200x10mm |
| 18 | 150x10mm |
| 19 | Providing and fixing aluminium handles,ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with necessary screws etc. complete.125mm |
| 20 | 100mm |
| 21 | Providing and fixing oxidised M.S. Casement stays (straight peg type)with necessary screws etc. Complete. |
| 22 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand)jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc. complete Size of Tile 600x600x10 mm |
| 23 | Providing and fixing Ist quality ceramic glazed walltiles conforming to IS: 15622 (thickness to be specified by the manufacturer),of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting,risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)jointing with grey cement slurry @ 3.3 Kg/sqm including pointing inwhite cement mixed with pigments for matching shadecomplete . |
| 24 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipe conforming to IS : 13592Type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion, (i) single socket pipe 110mm dia |
| 25 | Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticisedRigid PVC rain water pipe conforming to IS : 13592Type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion. single pushfit Coupler 110 mm |
| 26 | Bend 110mm |
| 27 | Shoes Plain110mm |
| 28 | Providing and fixingunplasticised-PVC pipe clips of approval design ofunplasticised-PVC rain water pipe by mean of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortat 1:4 ( 1 cement : 4coarse sand) and making good the wall etc. complete.110 mm |
| 29 | Providing and fixing M.S. Fan clamp type I or II of 16 mm dia M.S. Bar, bent to shape with hooked ends in R.C.C. Slab or Beams during laying, including painting the exposed portion of loop, all as per standard design complete. |
| 30 | Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 32 | 6mm cement plaster of mix 1 : 3 (1 cement : 3 fine sand ) |
| 33 | 20mm cement plaster of mix 1 :6( 1 cement : 6 fine sand ) |
| 34 | Providing and applying white cement based putty of average thickness 1mm, of approval brand and manufacturer, over the plaster wall surface to prepare the surface even and smooth complete. |
| 35 | Finishing wall withAcrylic smooth exterior paint of required shade: New work ( Two or more coat applied @ 1.67ltr / 10sqm over and including priming coat of exterior primer applied @ 2.20 Kg / 10sqm |
| 36 | Distemperingwith oil bound washable distemper of approval brand and manufacture to give an even shade.New work ( two or more coats)over and including water thinnable priming coat with cement primer. |
| 37 | Structural steel work riveted, bolted or welded in built up sections, trussed and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 38 | Providing corrugated G.S. Sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. Limpet washers or with G.I.limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shapewherever required. 0.63 mm thick with zinc coating not less than 275 qm/m³ |
| 39 | Providing ridges or hips of width 60 cm overall width plainG.S. Sheetfixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. Limpet washers complete. 0.63 mm thick with zinc coating not less than 275 qm/m³ |
| 40 | Providing and laying 15 cm wide, 45cm overall semi circular Plain G.S.Sheet Gutter with iron brackets 40x3mm size, bolts nuts and washers etc including making necessary connection with rain water pipe complete.0.63 mm thick with zinc coating not less than275 qn/sqm |
| 41 | Providing and fixing plain multipurpose cement board (Hight pressure steamcured) with suitable screwfor cement particle board in ceiling etc.complete(frame workto be paid seperatately6mm thickcement fiber board as per IS 14862 |
