Bharat Sanchar Nigam Limited-BSNL has published Replacement Of Damaged Ac Sheet Roofing Of Sheds And Door Of Cmts Store At Ghatikia, Bhubaneswar. Replacement Of Damaged Ac Sheet Roofing Of Sheds And Door Of Cmts Store At Ghatikia, Bhubaneswar.. Submission Date for this Tender is 16-08-2021. Shed Construction Tenders in Ghatikia Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dismantling and Demolishing |
2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
3 | In cement mortar |
4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
5 | Of area 3 sq. metres and below |
6 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
7 | Asbestos cement sheet |
8 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
9 | Above 40 mm nominal bore |
10 | Earth Work |
11 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
12 | Concrete Work |
13 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
14 | 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
15 | Masonry Work |
16 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : |
17 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
18 | Steel Work |
19 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
20 | Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer. |
21 | Roofing |
22 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
23 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : |
24 | Ridges plain (500 - 600mm). |
25 | Finishing |
26 | 12 mm cement plaster of mix : |
27 | 1:6 (1 cement: 6 coarse sand) |
28 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
29 | 1:6 (1 cement: 6 coarse sand) |
30 | Finishing walls with water proofing cement paint of required shade : |
31 | New work (Two or more coats applied @ 3.84 kg/10 sqm). |
32 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
33 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
34 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
35 | One or more coats on old work. |
36 | Repairs to Buildings |
37 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
38 | With cement mortar 1:4 (1cement: 4 coarse sand). |
39 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
40 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
41 | Water Supply |
42 | Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solevent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge:External work |
43 | 50 mm dia. nominal bore |
44 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
45 | 50 mm nominal bore. |
46 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
47 | Providing and fixing PTMT bib cock of approved quality and colour. |
48 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
49 | Cutting holes up to 30x30 cm in walls including making good the same: |
50 | With common burnt clay F.P.S. (non modular) bricks. |
51 | ROAD WORK |
52 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :-Payment to be made per metre cost of total length of barbed wire used. |
53 | With G.I. barbed wire |
54 | LMR ITEMS |
55 | Providing and fixing PVC union/Tee/JamNut of approved quallity in Sintex tank. |
56 | 25 mm nominal dia. |
57 | P/F PVC ball valve in pvc water pipe lineof approved make all complete |
58 | 25mm dia pipe |
59 | P/F PVC pipe of approved quallity for water supply pipe line i/c jointing the pipes with solvent cement adeshive etc complete |
60 | 25mm dia pipe |
61 | Taking in to possesion of old unserviceable materials |
62 | Old AC Sheet |
63 | Easing,Oiling & greasing of Rolling shutter for free movement all complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail