Rural Development And Panchayats Department has published Construction Of Block Development Office Building Shilai As Per Dnit. Submission Date for this Tender is 13-08-2021. Building Work Tenders in Shilai Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (i) All kinds of soil. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.( All kinds of soil)) |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 9 | Foundations, footings, bases for columns |
| 10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 12 | Suspended floors, roofs, landings, balconies and access platform (Code No. 5.9.3) Page No.80 |
| 13 | Retaining Wall |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,shuttering, finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size).all work up to plinth level. |
| 15 | 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size). (Code No. 5.1.2 ) Page No.79 |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement |
| 17 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size |
| 18 | Providing mild steel/Tor steel reinforcement for RCC work includingbendingbindingand placing position complete upto floor two level. |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately)Sal wood |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge.35 mm thick shutters. ( 2nd class Teak wood) |
| 21 | Providing 40X3mm (forty into three milimeters )flat iron hold fast 40cm(forty centimeter) long including fixing to frame with 10mm(ten milimeter) diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30X10X15cm (thirty into ten into fiften centimeter)1:3:6(one cement :three sand :six graded stone aggregate 20mm nominal size) |
| 22 | 4 mm thick glass pane (weight not less than 10 kg per sqm)tals . |
| 23 | 15 mm cement plaster on the rough side of single or half brick wall of mix1:6 (1 cement: 6 fine sand |
| 24 | 6MM CEMENT PLASTER 1:3 (1 cement : 3 fine sand) |
| 25 | Providing and fixing 10mm(Ten milimeter )thickwater proof stain and impect resistentheavy dutyvetrified tiles Nitco or equivalent 600X600X 10 mm(six hundred into six hundred into ten milimeter )manufactured of approved sade and colour in flooring ,treads of steps and landing laid over 12mm (twelve milimeter)thick cement mortar 1:3 (1ceemt :3 sand ) jointed with ceemt slurry mixed with pigment to match the shade of tiles as required complete including carriage of material with in all leads lifts in all floors |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 27 | Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete. |
| 28 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matters sand papered smooth to give final matter finish to the surface completeincluding carriage ofmaterial with in all leads andlifts. |
| 29 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface |
| 30 | Finishing wall with weather proof exterior grade emulsion of approved design (apexultima) or its equarlied on udecorated wall surfaces (Two Coats )to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etc. including sand paper smooth completeincluding carriage ofmaterial with in all leads andlifts. |
| 31 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : Second class teak wood |
| 32 | Providing and fixing mild steel plain grills of required pattern in wooden frames of window etc. with mild steel flat square of round bars with round headed bolts and nuts or screw etc. including carriage of material with in all leads lifts in all floors |
| 33 | Apply primer coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 34 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 35 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm |
| 36 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 150x10 mm |
| 37 | 150x10 mm |
| 38 | 100x10 mm |
| 39 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete |
| 40 | 100mm |
| 41 | 75mm |
| 42 | Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete |
| 43 | 100x75x3.50 mm |
| 44 | 75x60x3.10 mm |
| 45 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer MS tube |
| 46 | Providing and fixing on wall face PVC (D-plast) rain water pipes of workng pressure not less than 4.50kg/sqm including filling the joints with approved adhesive complete 100 MM dia pipes |
| 47 | Providing and fixing M.S holder bat clamps of approved design to C.I or S.C.I pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4:mix (one cement:two sand:four stone aggregated 20mm nominal size )and cost of cutting holes and making good the walls etc.110mmdiameter for C.I pipes |
| 48 | Steel work welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and appliying a priming coat of read lead paint.Grating, framed, guards., bars, ledders railing, brackets & simliars works. Item code:-1504040000 |
| 49 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(0.63 mm thick with zinc coating not less than 275 gm/ m² ) |
| 50 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete(0.63 mm thick with zinc coating not less than 275 gm/m²) |
| 51 | Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gm/m² |
| 52 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 53 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metalgrid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle precoated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be prepainted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in- Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/ mK |
| 54 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 55 | Providing and fixing vitreous china wash down closet (European type W.C. pan ) with integral P orS trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) seat and cover to be measured and paid for separately angle Indian universal closet including carriage of material up to all leads and lifts in all floors.(Ordinary Closet) |
| 56 | Providing and fixing vitreous china wash down water closet squatting pan(Indian type W.C. pan) of Cera , Hindware or equvalent)of size 580mm (earth work bed concrete, trap to be measured and paid for seprately . Orissa pattern |
| 57 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 58 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 59 | White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap |
| 60 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 61 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bor |
| 62 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore15 mm nominal bore |
| 63 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end25 mm nominal bor |
| 64 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 250 |
| 65 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 66 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 67 | Providing and fixing toilet paper holder C.P. brass |
| 68 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15mm |
| 69 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc |
| 70 | 15 mm (fifteen millimeters) nominal bore |
| 71 | 20 mm (twenty millimeters) nominal bore |
| 72 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 73 | 15 mm (fifteen millimeters) nominal bore |
| 74 | 20 mm (twenty millimeters) nominal bore |
| 75 | Providing and fixing G.I. fitting in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 76 | GI union15 mm nominal bore |
| 77 | Equal Tee 18.92.1 |
| 78 | For 15.88 mm outer dia pipe |
| 79 | For 22.22 mm outer dia pipe |
| 80 | Reducing Tee 18.93.1 |
| 81 | For 22.22 mm x 15.88 mm outer dia pipe |
| 82 | Valve Connector 18.98.1 |
| 83 | For 15.88 mm outer dia x 15 mm nominal dia threaded |
| 84 | For 22.22 mm outer dia x 15 mm nominal dia threaded |
| 85 | Female Threaded Elbow 90° 18.99.1 |
| 86 | For 15.88 mm outer dia x 15 mm nominal |
| 87 | For 22.22 mm outer dia x 15 mm nominal dia threaded |
| 88 | Male Thread Connector/ Adapter |
| 89 | For 15.88 mm outer dia x 15 mm nominal dia threaded |
| 90 | For 22.22 mm outer dia x 15 mm nominal dia threaded |
| 91 | Female Thread Connector/ Adapter |
| 92 | For 15.88 mm outer dia x 15 mm nominal dia threaded |
| 93 | For 22.22 mm outer dia x 15 mmnominal dia threaded |
| 94 | Coupler |
| 95 | 1216 (16 mm OD) pipe |
| 96 | 1620 (20 mm OD) pipe |
| 97 | Providing and fixing PVC water storage tank of Sintex or equvalent make of ISI :12701 Marked ,G.I. inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground Level (1000 litres net capacity tank)including carriage of material upto all leads and lifts in all floor |
| 98 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 99 | 75 mm nominal size (seventy five millimeters) size |
| 100 | 110 mm nominal size (one hundredten millimeters) size |
| 101 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 102 | 75 mm |
| 103 | 110 mm |
| 104 | Bend 87.5° |
| 105 | 75 mm |
| 106 | 110 mm |
| 107 | U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe |
| 108 | U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia |
| 109 | U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm. dia |
| 110 | U-PVC pipes |
| 111 | uPVC pushfit coupler (single) 75 mm thick each |
| 112 | uPVC pushfit coupler (single) 110 mm thick each |
| 113 | U-PVC pipes |
| 114 | uPVC single equal Tee (without door) 75x75x75 mm |
| 115 | uPVC single equal Tee (without door) 110mm dia |
| 116 | U-PVC pipes |
| 117 | uPVC single equal Tee (with door) 75x75x75 mm |
| 118 | uPVC single equal Tee (with door) 110x110x110 mm |
| 119 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design |
| 120 | Inside dimensions 455x610 mm and 45 cm deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 121 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 122 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 123 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved qualityRectangular shape 600x450 mm internal dimensions |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
