Proposed Construction Of Fish Market At Dhanpur/ S.H. Building Portion Including Water Supply And Sanitary Installation (Balance Work) Proposed Construction Of Fish Market At Dhanpur/S.H. Building Portion Including Water Supply And Sanitary Installation (, Dhanpur, Sonamura, Sepahijala District-Tripura

TDR : 28768542

Tender Notice
BOQ

Expired

Dhanpur, Sonamura, Sepahijala District , Tripura

Tender Brief : Proposed Construction Of Fish Market At Dhanpur/ S.H. Building Portion Including Water Supply And Sanitary Installation (Balance Work) Proposed Construction Of Fish Market At Dhanpur/S.H. Building Portion Including Water Supply And Sanitary Installation (

Document Fees
₹ 1000 /-

EMD
₹ 25325.0 /-

Tender Value
₹ 25.32 Lakhs /-

Submission Date
27-08-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in the excavation by mechanical means over areas ( exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m & lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil by manual means.
2	Earth work in the excavation in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plain) including dressing of sides & ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil by manual means.
3	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil
4	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: i) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size)
5	Centering shuttering including struttings, propping etc and removal of form work for:iv) Weather shade, Chajjas, corbels etc., including edges.
6	v)Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank
7	vii) Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank
8	First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- i) In cement mortar 1:5 ( 1 cement : 5fine sand ).
9	Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-i) In cement mortar 1:4 ( 1 cement : 4 fine sand ).
10	Providingandfixingaluminiumworkfordoors,windows,ventilators, and partitionswithextrudedbuiltupstandardtubularsections/ appropriateZsectionsandothersectionsofapprovedmake conforming to IS: 733 and IS : 1285, fixed with dash fasteners of required dia and sizes, necessary filling up of gaps at junctions,i,eat top, bottom and sides with required EPDM rubber/neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawingandthedirectionofEngineerincharge :(-Glazing and panneling and desh festeners to be paid seperately).A. For fixed portion of approved quality:- i)Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15).
11	B. For shutters of doors, windows & ventilatorsincluding providing and fixing hinges / pivots / and making provision for fixing fittings wherever required including the cost of EPDM rubber/neoprene gasket required ( Fittings shall be paid for separately ): i)Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15).
12	Providing and fixing glazing of approved quality in aluminium doors,windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge :-i)With glass/float glass panes of 5.5 mm thickness ( weight not less than 10 kg / sqm )
13	Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. of approved quality complete as per direction of Engineer-in-charge:- i) Anodised aluminium of grade AC 15 )
14	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mm thick. Prelaminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked.
15	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. i) Fixed to openings /wooden frames with rawl plugs screws etc.
16	Providing and fixing chromium plated brass handles with necessary screws etc. Complete:i) 125mm
17	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :i) 300x10 mm
18	Providing and fixing ISI marked oxidised M.S sliding door bolts with nuts and screwsetc. complete.: i) 300×16 mm.
19	Providing and fixingfan clamp type-Iof 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.
20	Providing and fixing factory made UPVC door frame(single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-in-charge using 100x8 sheet meatel CSK Screws.
21	Providing and fixing 28mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles joints are made using solvent adhesive and GI \"C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm) stiffener frame insert & telescopic polymeric \"L\" corners. The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer\"s specification and directions of the engineer in charge, cover moulding shall be provided for covering fixing screws and elegant look ( for W.C. bathroom door shutter )
22	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : i) karai wood
23	Providing and fixing ISI marked flush dppr shutters conforming to IS:2202 (Part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters. i)35 mmthick including ISI marked stainless steel but himges with necessary screws.
24	S.H. FLOORING WORK : Providing and fixing Kota stone in floors over 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishingcomplete. i) Kota stone slab 25mm thick.
25	Providing and laying 1st quality ceramic glazed floor tiles 300x300 mm or more( thickness to be specified by the manufacturer)of 1st quality conforming to IS: 15622of approved make in all colurs shades such as white,ivory,grey,fume red,brown over20mm thick bed of cement mortar 1:4 ( 1 Cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cementmixed with pigment of matching shade complete.
26	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
27	S.H. FINISHING WORK : 12 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete.i) In cement mortar 1 : 5 ( 1 cement : 5 fine sand )
28	15 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete:i) In cement mortar 1 : 5 ( 1 cement : 5 fine sand )
29	6 mm cement plasterin single layer including cost of materials required and finishing even and smooth and curing complete: : i) In cement mortar 1 : 3 ( 1 cement : 3 fine sand )
30	Neat cement punning.
31	Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.67 kg/10 sqm ) over and including base coat water proofing cement paint applied @ 2.20 kg/10 sqm complete.
32	Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), to give an even shade overand including a priming coat of cement primer complete.
33	Varnishing with varnish of approved brand and manufacturer. i) Two or more coats of glue with spar varnish over an under coat of flatting varnish.
34	Applying priming coat: i) With ready mixed pink primer of approved brand and manufacture on wood work ( hard & soft wood ).
35	ii) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work.
36	Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade.
37	S.H. SANITARY AND WATER SUPPLY WORK:Providing and fixing white vitreous china extended wallmounting water closet of size 780x370x690mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover and cistern fittings,nuts,bolts and gasket etc complete.
38	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively.
39	Providingand fixing wash basinwith C.I. brackets, 15 mm C.P. brass pillartaps,32mmC.P.brasswasteofstandardpattern,including paintingoffittingsandbrackets,cuttingandmakinggoodthewalls wherever require :White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap
40	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe:i) 32 mm dia
41	Providing and fixing 100 mm sand cast Iron grating for gully trap.
42	Providing and fixing soil, waste and vent pipes: A) 100 mm diaCentrifugally cast ( spun) iron socketed pipe as per IS: 1729
43	Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. A) 100 mmSand cast iron S&S as per IS - 1729
44	Providing and fixing plain bend of required degree. i) . A) 100 mmSand cast iron S&S as per IS - 1729
45	Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. i)100x100x100 mmSand cast iron S&S as per IS - 1729
46	Providing and fixing collar:i) 100 mm Sand cast iron S&S as per IS - 1729
47	Providing and fixing terminal guard:A) 100 mm Sand cast iron S&S as per IS - 1729
48	Providing and fixing C.P. brass stop cock of approved quality : i) 15 mm nominal bore
49	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 i) 15 mm nominal bore
50	Providing and fixing G.I pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall.i) 15 mm nominal bore
51	ii) 20 mm dia nominal bore
52	Providing and fixing G.I. pipes complete with G.I. fittings and trenching and refilling etc. External work:i)40mm nominal bore
53	Providing and fixing uplasticised PVC connection pipe with brass unions : A) 45 cm length i) 15 mm nominal bore
54	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
55	Supplying and fixing C.I. cover without frame for manholes : i) 455 x 610 mm rectangular C.I. cover (light duty)the weight of the cover to be not less than 23 kg.
56	Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :i) Inside dimensions 455x610 mm and 45 cm deep for single pipe line.
57	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
58	ProvidingandfixingonwallfaceunplasticisedRigidPVCrainwater pipes (working pressure 4 kg / cm2)conformingto IS : 13592 Type Aincludingjointingwith sealring conformingtoIS:5382leaving10mmgapforthermalexpansion: i) Single socketed pipe - 110 mm OD.
59	Providingandfixing on wallface unplasticised - PVCmouldedfittings/ accessoriesfor unplasticised Rigid PVC rain water pipes conforming to IS:13592TypeAincludingjointingwith sealringconformingtoIS: 5382 leaving 10 mm gap forthermalexpansion:A) Coupler. i) 110 mm.
60	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVCrainwater pipesbymeansof50x50x50mmhard woodplugs,screwedwithM.S.screwsofrequiredlengthincluding cutting brick work andfixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.i) 110mm
61	Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete. i) 110mm
62	Supplying chemical emulsion in sealed containers including delivery as specified.i) Chlorpyriphos/Lindane emulsifiable concentrate of 20%
63	Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) and continuous chemical barrier under and alround the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth of which apron is to be laid, surroundings of pipes and conduits etc. complete as per specification. The work should be carried out as per IS: 6313 (Part II)- Latest revision [Plinth area of the building at ground floor only shall be measured for payment] :i) With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
64	Providing and fixing 2 HP single Phase monoblock pump set (pump & motor) ISI marked and approved quality (Crompton greaves) or equivalent including electric installation by providing delta starter etc. with necessary connection with delivery and suction line complete as per direction of the engineer-in-charge.
65	Providing and fixing bolts including nuts and washers complete.
66	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
67	Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per MoRD Technical Specification Clause 303.5.2.
68	Flat brick soling Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412.
69	Brick edging laid in full brick width Providing and laying brick edging on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6,watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412.
70	Interlocking Concrete Block Pavement Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and MoRD Technical Specification Clause 1504.
71	Drilling and boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags/samples boxes and disposal of excess soil or mud, including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engineer-In-Charge.
72	Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per direction of the Engineer-in-Charge.a) From 100 mm dia pilot hole to 250 mm bore hole.
73	Providing & Shrouding of deep tube well assembly with washed pea gravels (2.0 - 4.75 mm effective size) as per specification (IS: 4097) and direction of the Engineer-In-Charge. i) Pea gravels obtained from Durgapur, West Bengal
74	Providing & Shrouding of deep tube well assembly with washed pea gravels (2.0 - 4.75 mm effective size) as per specification (IS: 4097) and direction of the Engineer-In-Charge. i) Pea gravels obtained from Durgapur, West Bengal
75	Supplying and fitting fixing of single phase motor starter panel unit 3.0 HP capacity comprising with 2 pole conductor, over load relay, capacitor, voltmeter of BCH/L&T mark with necessary copper wireetc complete as per direction of the Engineer-in-Charge.
76	Supplying and fitting fixing of 32 amps single phase Main switch of BCH/L&T/Havels mark with necessary copper wire wiring etc complete as per direction of the Engineer-in-Charge.
77	Providing and fixing Hand pump(iron) with necessary fitting & fixing etc.complete as per direction of the Engineer-in-Charge.
78	Providing and fitting fixing & lowering of Brass stainers for shallow tube well of size 75mm/65mm including all necessary fitting & fixing etc. Complete of ISI brand & as per direction of Engineer-in-charge. (each tube well shall be fitted with 2 strainers of ISI marked).

Also Visit

Tenders

Tripura Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Earth work in the excavation by mechanical means over areas ( exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m & lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil by manual means.
2	Earth work in the excavation in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plain) including dressing of sides & ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil by manual means.
3	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil
4	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: i) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size)
5	Centering shuttering including struttings, propping etc and removal of form work for:iv) Weather shade, Chajjas, corbels etc., including edges.
6	v)Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank
7	vii) Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank
8	First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- i) In cement mortar 1:5 ( 1 cement : 5fine sand ).
9	Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-i) In cement mortar 1:4 ( 1 cement : 4 fine sand ).
10	Providingandfixingaluminiumworkfordoors,windows,ventilators, and partitionswithextrudedbuiltupstandardtubularsections/ appropriateZsectionsandothersectionsofapprovedmake conforming to IS: 733 and IS : 1285, fixed with dash fasteners of required dia and sizes, necessary filling up of gaps at junctions,i,eat top, bottom and sides with required EPDM rubber/neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawingandthedirectionofEngineerincharge :(-Glazing and panneling and desh festeners to be paid seperately).A. For fixed portion of approved quality:- i)Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15).
11	B. For shutters of doors, windows & ventilatorsincluding providing and fixing hinges / pivots / and making provision for fixing fittings wherever required including the cost of EPDM rubber/neoprene gasket required ( Fittings shall be paid for separately ): i)Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15).
12	Providing and fixing glazing of approved quality in aluminium doors,windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge :-i)With glass/float glass panes of 5.5 mm thickness ( weight not less than 10 kg / sqm )
13	Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. of approved quality complete as per direction of Engineer-in-charge:- i) Anodised aluminium of grade AC 15 )
14	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mm thick. Prelaminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked.
15	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. i) Fixed to openings /wooden frames with rawl plugs screws etc.
16	Providing and fixing chromium plated brass handles with necessary screws etc. Complete:i) 125mm
17	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :i) 300x10 mm
18	Providing and fixing ISI marked oxidised M.S sliding door bolts with nuts and screwsetc. complete.: i) 300×16 mm.
19	Providing and fixingfan clamp type-Iof 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.
20	Providing and fixing factory made UPVC door frame(single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-in-charge using 100x8 sheet meatel CSK Screws.
21	Providing and fixing 28mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles joints are made using solvent adhesive and GI \"C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm) stiffener frame insert & telescopic polymeric \"L\" corners. The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer\"s specification and directions of the engineer in charge, cover moulding shall be provided for covering fixing screws and elegant look ( for W.C. bathroom door shutter )
22	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : i) karai wood
23	Providing and fixing ISI marked flush dppr shutters conforming to IS:2202 (Part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters. i)35 mmthick including ISI marked stainless steel but himges with necessary screws.
24	S.H. FLOORING WORK : Providing and fixing Kota stone in floors over 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishingcomplete. i) Kota stone slab 25mm thick.
25	Providing and laying 1st quality ceramic glazed floor tiles 300x300 mm or more( thickness to be specified by the manufacturer)of 1st quality conforming to IS: 15622of approved make in all colurs shades such as white,ivory,grey,fume red,brown over20mm thick bed of cement mortar 1:4 ( 1 Cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cementmixed with pigment of matching shade complete.
26	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
27	S.H. FINISHING WORK : 12 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete.i) In cement mortar 1 : 5 ( 1 cement : 5 fine sand )
28	15 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete:i) In cement mortar 1 : 5 ( 1 cement : 5 fine sand )
29	6 mm cement plasterin single layer including cost of materials required and finishing even and smooth and curing complete: : i) In cement mortar 1 : 3 ( 1 cement : 3 fine sand )
30	Neat cement punning.
31	Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.67 kg/10 sqm ) over and including base coat water proofing cement paint applied @ 2.20 kg/10 sqm complete.
32	Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), to give an even shade overand including a priming coat of cement primer complete.
33	Varnishing with varnish of approved brand and manufacturer. i) Two or more coats of glue with spar varnish over an under coat of flatting varnish.
34	Applying priming coat: i) With ready mixed pink primer of approved brand and manufacture on wood work ( hard & soft wood ).
35	ii) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work.
36	Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade.
37	S.H. SANITARY AND WATER SUPPLY WORK:Providing and fixing white vitreous china extended wallmounting water closet of size 780x370x690mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover and cistern fittings,nuts,bolts and gasket etc complete.
38	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively.
39	Providingand fixing wash basinwith C.I. brackets, 15 mm C.P. brass pillartaps,32mmC.P.brasswasteofstandardpattern,including paintingoffittingsandbrackets,cuttingandmakinggoodthewalls wherever require :White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap
40	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe:i) 32 mm dia
41	Providing and fixing 100 mm sand cast Iron grating for gully trap.
42	Providing and fixing soil, waste and vent pipes: A) 100 mm diaCentrifugally cast ( spun) iron socketed pipe as per IS: 1729
43	Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. A) 100 mmSand cast iron S&S as per IS - 1729
44	Providing and fixing plain bend of required degree. i) . A) 100 mmSand cast iron S&S as per IS - 1729
45	Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. i)100x100x100 mmSand cast iron S&S as per IS - 1729
46	Providing and fixing collar:i) 100 mm Sand cast iron S&S as per IS - 1729
47	Providing and fixing terminal guard:A) 100 mm Sand cast iron S&S as per IS - 1729
48	Providing and fixing C.P. brass stop cock of approved quality : i) 15 mm nominal bore
49	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 i) 15 mm nominal bore
50	Providing and fixing G.I pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall.i) 15 mm nominal bore
51	ii) 20 mm dia nominal bore
52	Providing and fixing G.I. pipes complete with G.I. fittings and trenching and refilling etc. External work:i)40mm nominal bore
53	Providing and fixing uplasticised PVC connection pipe with brass unions : A) 45 cm length i) 15 mm nominal bore
54	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
55	Supplying and fixing C.I. cover without frame for manholes : i) 455 x 610 mm rectangular C.I. cover (light duty)the weight of the cover to be not less than 23 kg.
56	Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :i) Inside dimensions 455x610 mm and 45 cm deep for single pipe line.
57	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
58	ProvidingandfixingonwallfaceunplasticisedRigidPVCrainwater pipes (working pressure 4 kg / cm2)conformingto IS : 13592 Type Aincludingjointingwith sealring conformingtoIS:5382leaving10mmgapforthermalexpansion: i) Single socketed pipe - 110 mm OD.
59	Providingandfixing on wallface unplasticised - PVCmouldedfittings/ accessoriesfor unplasticised Rigid PVC rain water pipes conforming to IS:13592TypeAincludingjointingwith sealringconformingtoIS: 5382 leaving 10 mm gap forthermalexpansion:A) Coupler. i) 110 mm.
60	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVCrainwater pipesbymeansof50x50x50mmhard woodplugs,screwedwithM.S.screwsofrequiredlengthincluding cutting brick work andfixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.i) 110mm
61	Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete. i) 110mm
62	Supplying chemical emulsion in sealed containers including delivery as specified.i) Chlorpyriphos/Lindane emulsifiable concentrate of 20%
63	Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) and continuous chemical barrier under and alround the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth of which apron is to be laid, surroundings of pipes and conduits etc. complete as per specification. The work should be carried out as per IS: 6313 (Part II)- Latest revision [Plinth area of the building at ground floor only shall be measured for payment] :i) With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
64	Providing and fixing 2 HP single Phase monoblock pump set (pump & motor) ISI marked and approved quality (Crompton greaves) or equivalent including electric installation by providing delta starter etc. with necessary connection with delivery and suction line complete as per direction of the engineer-in-charge.
65	Providing and fixing bolts including nuts and washers complete.
66	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
67	Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per MoRD Technical Specification Clause 303.5.2.
68	Flat brick soling Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412.
69	Brick edging laid in full brick width Providing and laying brick edging on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6,watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412.
70	Interlocking Concrete Block Pavement Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and MoRD Technical Specification Clause 1504.
71	Drilling and boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags/samples boxes and disposal of excess soil or mud, including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engineer-In-Charge.
72	Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per direction of the Engineer-in-Charge.a) From 100 mm dia pilot hole to 250 mm bore hole.
73	Providing & Shrouding of deep tube well assembly with washed pea gravels (2.0 - 4.75 mm effective size) as per specification (IS: 4097) and direction of the Engineer-In-Charge. i) Pea gravels obtained from Durgapur, West Bengal
74	Providing & Shrouding of deep tube well assembly with washed pea gravels (2.0 - 4.75 mm effective size) as per specification (IS: 4097) and direction of the Engineer-In-Charge. i) Pea gravels obtained from Durgapur, West Bengal
75	Supplying and fitting fixing of single phase motor starter panel unit 3.0 HP capacity comprising with 2 pole conductor, over load relay, capacitor, voltmeter of BCH/L&T mark with necessary copper wireetc complete as per direction of the Engineer-in-Charge.
76	Supplying and fitting fixing of 32 amps single phase Main switch of BCH/L&T/Havels mark with necessary copper wire wiring etc complete as per direction of the Engineer-in-Charge.
77	Providing and fixing Hand pump(iron) with necessary fitting & fixing etc.complete as per direction of the Engineer-in-Charge.
78	Providing and fitting fixing & lowering of Brass stainers for shallow tube well of size 75mm/65mm including all necessary fitting & fixing etc. Complete of ISI brand & as per direction of Engineer-in-charge. (each tube well shall be fitted with 2 strainers of ISI marked).

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us