Military Engineer Services-MES has published Improvement Of Dining Hall And Kitchen At Nhdo Coonoor Under Ge Dssc Wellington Improvement Of Dining Hall And Kitchen At Nhdo Coonoor Under Ge Dssc Wellington. Submission Date for this Tender is 07-09-2021. Building Work Tenders in WELLINGTON Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Aug-2021 | AMENDMENT TO TENDER DOCUMENT | Technical Bid | 20-08-2021 |
| 2 | 10-Aug-2021 | REVISED BOQ | BOQ | 20-08-2021 |
| 3 | 20-Aug-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-08-2021 |
| 4 | 02-Sep-2021 | Postponed Tender 8181 | Date | 07-09-2021 |
| Sl. No. | Item Description |
| 1 | B/R PORTION Dismantling boarding ( existing wooden flooring including all accessories), any description, fixed with screws complete all as specified and as directed. |
| 2 | S & F 18 mm thick Engineers hard wood ( American wallnut pattern ) first class teak wood wooden flooring fixed backing with 12 mm thick plywood (BWP)adhesive /nailing, and laid overpolythene foam on PCC floors and including necessary cutting / grinding to bring smooth finish complete all as specified and as directed. |
| 3 | M & L for complete removal of existing treatment and preparation of surface with two coats of wall care putty and applying two coats of Emulsion Paint in Asian Acrylic Emulsion or equivalent in Shalimar/Berger paints over priming surfaces on wall complete all as specified and directed. |
| 4 | M & L for complete removal of existing painting from the wooden joinery and sanding /preparing the old wooden surfaces and applying two coats of polyurethane(PU) polish etc., including providing half round /bevelled edge teak wood, fillets at glazing /wire mesh sectional area n.exc 3 Sq cm etc, complete all as specified and as directed. |
| 5 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from frame) complete all as specified and as directed. |
| 6 | S & Ffirst class hard wood plain solid, straight chowkhats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints etc.,complete all as specified and as directed. |
| 7 | S & F first class HW glazed and skeleton shutter 30mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats., complete all as specified and as directed. |
| 8 | S & F first class HW 30mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, fitted to chowkats., complete all as specified and as directed. |
| 9 | M & L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed. |
| 10 | S & F MS work as in hold fast etc conforming to (Fe-290 Gde-165) complete all as specified and as directed. |
| 11 | M & L for providingPCC (1:3:6) typeC-1 (using 20 mm graded stone aggregate) as set in CM (1:6) for hold fastetc., complete all as specified and as directed. |
| 12 | S & FButt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 125 mm long complete all as specified and as directed. |
| 13 | S & F extruded brass handlesfabricated type polished size 150 mm long complete all as specified and as directed. |
| 14 | S & F Brass, sliding door bolt 300 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed. |
| 15 | S & FBrass barrel tower bolts of extruded section 150 mm long complete all as specified and as directed. |
| 16 | Demolition of brick work or stone / boulder masonry,built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc and removing unserviceable debris off the premises all as specified and as directed. |
| 17 | M & L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 18 | M & L for rendering10mm thick in CM (1:6) onfair faces of stone surfaces /brick, finished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M & L for preparation of new surface with two coats of wall care putty and applying two coats of Emulsion Paint in Asian Acrylic Emulsion or equivalent in Shalimar /Berger piants over priming surfaces on wall complete all as specified and as directed. |
| 20 | S & F aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed. |
| 21 | Dismantling of cast iron work of any description & in any position complete all as specified and as directed. |
| 22 | S & F75mm bore PVC ( SWR) pipes, type "B",single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 23 | S & F 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 24 | Dismantling boarding any description fixed in any position with nails complete all as specified and as directed. |
| 25 | Supplying and erecting the false ceiling with Gypsum board 10 to 12mm thick fixed with standard GI frame work with GI fixing channels @ 1220mm c/c and inter spaced at 610mm c/c the main fixing channels shall be fixed through GI channels suspenders from roof @ 1200 c/c, main and inter connected channel shall be fixed through fasterners clips as per manufacturer"s instructions with and including plaster of paris decorative type cornice all around at the junction of wall and ceilingetc complete all as specified and directed. |
| 26 | M & L for preparing false ceiling with primer and applying one coat of smart care primer (primer cum sealer) and applying two coats of Royal Aspira of approved colour by roller all as manufacturer"sinstructions and as directed by Engr-in-Charge. Make : Royale Aspira of Asian Paint Ltd or equivalent in Nerolac/Berger as approved by GE. |
| 27 | S & F in repairs, using HDHMR Board Board 18mm thickboth side laminated any colour, as in PVC bedding shutter vertical support and horizontal shelfs including necessary fittings of screws /MS brackets in kitchen cupboard complete all as specified and as directed. Make :- HDHMR board : ACTION TESA or techno commercially equivalent in Century Premium Plus/ Greenply Associates |
| 28 | S & F in repairs soft close stainless steel hinges 75mm complete all as specified and as directed. Make for Hardware : EBCO or techno commercially equilavent as approved by GE. |
| 29 | S & F in repairs Gunmetal handle 100mm complete all as specified and as directed. Make for Handle : RICH or techno commercially equivalent as approved by GE. |
| 30 | S & F stainless steel telescoping channel for drawer including necessary fiiting upto length upto 600mm complete all as specified and directed. |
| 31 | S & F Stainless steel racks for crockery of kitchen drawer as approved design and standard quality of length 600mm complete all as specified and as directed. |
| 32 | M & L forUPVC doorwhite colour all as per manufacturer"s direction and as per following specifications all as directed :- (i) The profile for UPVC door frame shall be made of UPVC material conforming to IS-10151 of the extruded UPVC section having over all dimension of 100 x 62 x 50mm having wall thickness 2mm (+) or (-) 0.2mm. (ii) Corners of wall frame shall be jointed by MS galvanised bracket joints mitred and plastic welded. (iii) The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm (+) or (-) 0.1mm and the tie rod shall be provided at the bottom of the frame. (iv) The door system should be glazed with 5.5mm thick glass of size top and bottom portion will be in UPVC board andlocking arrangement and rubber gasket and necessary clipping etc. (v) The entire fixing will be done as per manufacturer"s instruction and specification and as directed. Make : Madhu Industries/ AMD Overseas Ltd / Gadli Industries/ Simta Astrix |
| 33 | Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 34 | M & L for granite (of any type) slab 9mm to 10mm thick machine cut, bedding ang jointed with grey cement slurry and pointed with white cement with admixture of pigment of match to shade of granite stone, including grinding and polishing, laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 35 | M & L for granite (of any type) slab 18mm to 20mm thick machine cut, bedding ang jointed with grey cement slurry and pointed with white cement with admixture of pigment of match to shade of granite stone, including grinding, moulding and polishing, laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 36 | S & F in repair single lever sink mixer with swinging spout, wall mounted model with connecting legs and wall flanges complete all as specified and as directed. Make : Jaquar, Cat No : CON-309KNM or equivalent in Hindware /Cera /Parryware. |
| 37 | M & L for repairs to potholes any depth n.exc 1 Sqm each incluidng sweeping free from dust and mud, or water, scoring sunken surgface in roads ,paths etc. cutting arround edgesto atleast25 mm in depth , making good by filling in screened& graded road metal, watering and well ramming (incl supply of road metal) complete all as specified and as directed. |
| 38 | M & L for preparing old black top surfaces by brushing with wire brushesfor removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and as directed. |
| 39 | M & L for applying evenly a priming /tack coat with bituminous primer using paving bitumen VG -10 grade at 5Kg per 10 Sqm on old black top surfaces complete all as specified and as directed. |
| 40 | M & L for 30mm consolidated thick bituminous semidense asphaltic concreteusing paving bitumen VG -30 grade with 5.50% binder content by weight of total mix rolled and compacted to required camberand gradient complete all as specified and as directed. |
| 41 | M & L for premix bituminous macadam laid /rolled and compacted to required camber @ 4% binder with using paving bitumen VG -30 grade ofconsolidated thickness not exc 75mm complete all as specified and as directed. |
| 42 | M & L for road markings edge lines, centre linesetc., with thermo static road marking paint 2mm thick laid with mechanical paver etc complete all as specified and as directed. |
| 43 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed. |
| 44 | M & L for providing 100 mm thick PCC (1:4:8), type D-2 (using 40 mm graded stone aggregate) as in sub base for floors /pavings etc all as specified and as directed. |
| 45 | M & L for providing 100 mm thick PCC (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in pavings etc all as specified and as directed. |
| 46 | S & F in repairs metal tubular delinator 900 mm long x 75 dia MS Pipe (medium grade) powder coasted with top cover with jali 400mm long from top and plasted with twin colour reflective taps strips embedded 200mm below ground level including excavation and PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) in foundation of size 200mm x 200mm x 200mm and making good surface complete all as specified and as directed. |
| 47 | S & F in repairs cat eye 100mm x 100mm x 20mm, 3m USA brand made of polycarbonate with electronically welded prismatic recto reflective lenses on two side for maximum rectro reflection in wet dry condition fixed with 3M bituminous adhesive BT-69, fixed at suitable distance including necessary preparation complete work) complete all as specified and as directed. |
| 48 | S & F convex mirror of 100cm dia with MS poles of 80mm thickness medium grade (length of poles is 2.00m) fixed with cleats and hooks including nuts, embedded in post holes of size (40cm x 40cm x 60cm) in PCC (1:2:4) Type B1 using 20mm graded aggregate complete all as specified and directed. |
| 49 | E/M PORTION Taking down old, unserviceable aluminium point wiring (light, fan, socket or power) complete, including fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 50 | M & L for point wiring with 1.5 Sq mm, PVC insulated, FRLS,single core, copper conductor cable, 1100 Volt grade, multi stranded drawn through and including medium grade Rigid non metalic PVC conduit conealed in wall/ceiling/roof etc with all necessary accessories for One light/fan/call bell point controlled by one switch controlled by one switch with and includingcontinuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly, in the modular flush boxes etc. complete all as specified and directed. Note: (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (ii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates.(iii) Modular flush boxes will be measured & paid seperately. |
| 51 | Description all as per Item No 50 above but One5 amps 5 Pin socket outlet on independent board complete all as specified and as directed. |
| 52 | M & L for point wiring with 1.5 Sq mm, PVC insulated, FRLS,single core, copper conductor cable, 1100 Volt grade, multi stranded drawn through and including medium grade Rigid PVC casing caping in wall/ceiling/roof etc with all necessary accessories for One light/fan/call bell point controlled by one switch controlled by one switch with and includingcontinuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly, in the modular flush boxes etc. complete all as specified and directed. Note: (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (ii) Modular flush boxes will be measured & paid seperately |
| 53 | Description all as per Item No 52 above but One5 amps 5 Pin socket outlet on independent board complete all as specified and as directed. |
| 54 | Description all as per Item No 52 above but with PVC insulatedcopper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor for 16A switch socket complete all as specified and as directed. |
| 55 | M & L for sub main wiring with four single core, multi stranded,PVC insulated, 1100 Volt grade,FRLS cable with multi stranded copper conductor of size 6 Sq mm drawing through and including medium grade PVC casing caping in wall/ceiling/roof etc. including continuous PVC insulated copper conductor two single core earth continuity conductor of size 6 Sqmm connected common earth complete all as specified and directed. Note:(i) 6 runs of 6 Sqmm cable and one run of casing caping shall be measured as one unit length (ii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (iii) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates. |
| 56 | M & L for sub main wiring with two single core, multi stranded,PVC insulated, 1100 Volt grade,FRLS cable with multi stranded copper conductor of size 4 Sq mm drawing through and including medium grade PVC casing caping in wall/ceiling/roof etc. including continuous PVC insulated copper conductor single core earth continuity conductor of size 4 Sqmm connected common earth complete all as specified and directed. Note:(i) 3 runs of 4 Sqmm cable and one run of casing caping shall be measured as one unit length (ii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (iii) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates |
| 57 | S & F Modular type socket out let 2 in 1, 6/16 Amps, 2 module, with ISI marking all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVKCWW163 or techno-commercially equivalent in Legrand/ Anchor Roma. |
| 58 | S & F Modular type switch single pole ,16 Amps one way, 1 module,ISI marked all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW161or techno-commercially equivalent in Legrand/ Anchor Roma. |
| 59 | S & F Modular type switch single pole, 6 Amps one way, 1 module,ISI marked complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW061or techno-commercially equivalent in Legrand/ Anchor Roma. |
| 60 | S & F Modular type socket out let 6 Amps 3 pin , 2 module,ISI marked complete all as specified and directed. Make :Verona of Crabtree (Havells), Cat No : ACVKSWW065 or techno-commercially equivalent in Legrand// Anchor Roma. |
| 61 | Supply & Fixingmodular flush box suitable for fixing switches/sockets of following modules all as directed. 1 Module Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX01 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab |
| 62 | Description all as per Item No 61 above but 3 Module complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX03 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab |
| 63 | Description all as per Item No 61 above but 4 Module complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX04 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab |
| 64 | Supply & Fixing modular cover platesuitable for fixing switches/sockets of following modules all as directed. 1 Module Make : Verona of Crabtree ( Havells), Cat No : ACVPPCWV01 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab |
| 65 | Description all as per Item No 62 above but 3 Module complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVPPCWV03 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab |
| 66 | Description all as per Item No 62 above but 4 Module complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVPPCWV04 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab Note : The make of Modular cover plates should be same as that of Modular boxes |
| 67 | S & F ceiling rose, PVC/polycarbonate, insulated body, 2/3 terminals and 240 Volts, ISI marked complete all as specified and as directed. Make: Havells/CG/Anchor |
| 68 | S & F IP>=20, Class I, Wall mounted 4 feet LED lighting fixture with integrated electronic driver & polycarbonate difuser complete with all accessories, prewired, 20 W with min 1800 lumens, 6500 K, PF>=0.90, CRI>=80 and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and directed. Make: Havells,Cat No: ENDURALINEARNEO BS20WLED865SPCWH or techno-commercially equivalent in Philips/Jaquar |
| 69 | S & F IP>=20, Class I Wall mounted 2 feet LED LED lighting fixture with integrated electronic driver & polycarbonate diffuser complete with all accessories, prewired, including10 W with min 900 lumens, 6500 K, PF>=0.90, CRI>=80 and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and directed. Make: Havells ,Cat No: ENDURALINEARNEO BS10WLED865SPCWH or techno-commercially equivalent in Philips/Jaquar |
| 70 | S & F IP >= 66,IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10Wwith min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Havells, Cat No : HEXAFT10WLED857 SSYMBOPC or techno-commercially equivalent in Philips/Jaquar |
| 71 | S & F recess mounted aesthetically designed LED light of 12 Watts, 3000K with high power LED as source which provides soft-light and glare free symmetrical distribution all as specified and directed. Make : Luker, Cat No :LNPR12or techno-commercially equivalent in Philips/Jaquar Note: The cost of making good to the ceiling and matching to the existing surface is deemed to be included in the unit quoted rates. |
| 72 | Description all as per Item No 67 above but with LED light of 18 Watts, 3000K complete all as specified and directed. Make : Luker Cat NoLNPR18or techno-commercially equivalent in Philips/Jaquar |
| 73 | S & F chandelier fixture 8 LT opal glass with chrome finish, Dimension : D-700 mm H-1200 mm, with 8 Nos of LED lamps of 5W, Minimum 400 Lumen, CT 3000 K, candle type with E-14 base cap, with all lamps and accessories internally prewired and including connecting upwith twin/three core twisted flexible copper conductor cable of suitable size,adjusting the chain link pendants to adjust the height of the fittings all as specified and as directed. Make : Jaquar, Cat No :KCH-CHR-MD160275218A (For chandelier). Make:Havells Cat No: LHLDEROEMD9X005 (For lamps) or techno-commercially equivalent in Philips/Jaquar |
| 74 | S & F wall mountingDecorative fixture Opal glass with Chrome finish with minimum Dimension : L-310 mm W-160 mm H- 200 mm, 2 Nos of LED lamps of 5 W, Minimum 400 Lumen, CT 3000 K, candle type with E-14 base cap , with all lamps and accessories internally prewired and including connecting upwith twin/three core twisted flexible copper conductor cable of suitable size all as specified and as directed. Make :Jaquar, Cat No : KCH-CHR-MB160275212A (For fittings). Make:Havells, Cat No: LHLDEROEMD9X005 (For lamps) or techno-commercially equivalent in Philips/Jaquar |
| 75 | S & F wall mounting decorative photo lights of rating 12W, 3000K warm white with aluminum die cast body and PC diffuser with all fixing arrangement complete all as specified and as directed. Make: Luker, Cat No :LMCL 12 or techno-commercially equivalent in Philips/Jaquar |
| 76 | S & F Decorative bed side fixture 3W, Warm white, IP>=20 with aluminium die cast body with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed. Make: Luker, Cat No : LWL127-1 of Luker or techno-commercially equivalent in Philips/Jaquar. |
| 77 | Supply, install, testing & commissioning of Exhaust fan, PVC body with automatic back shutter louvers 250 mm sweep, 1280 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DX White or techno-commercially equivalent in Usha/Crompton. |
| 78 | Supply, install, testing & commissioning of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) incl taking down of old ex fan complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Crompton. Note for Item No 73 & 74 :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates.(ii) Old unsv Exhaust fans should be handed over to MES stores. |
| 79 | S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A C Series with Breaking capacity 10KA all as specified and as directed. Make : L &T, Cat No : DBMPS120SD or techno-commercially equivalent in Legrand/ABB |
| 80 | Supply, Fix, Installing and Testing Vertical type Storage electric water heater (Geysers) of 25 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation,2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated including multifuntion safety valve and 4 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos and stickering of Qtr No incl taking down of old geyser complete all as specified and directed. Make: Havells Monza DX,Cat No: GHWAMGTWH025 or techno-commercially equivalent in V Guard/ Bajaj Note:(i) Old Geysers should be handed over to MES Stores.(ii) Installed Geyser"s warrenty card should be submitted to the Engr-in-Charge.(iii)The cost of making good the disturbed surface and matching to the existing surface is deemed to be included in the unit quoted rate |
| 81 | S & F MCCB, 4 pole,63A rating (Ics = 100% Icu),415Volts,25 KA Breaking capacity,with adjustable thermal and fixed magnetic setting and making cut in existing panel for fixing of MCCB complete all as specified and as directed. Make: L & T, Cat No : CM90518OOHOortechno-commercially equivalent in ABB/Siemens. |
| 82 | S & F MCCB Enclosure suitable for fixing 4 pole MCCB, made of SS with IP 30 & IK 08 with in built louvers for better heat dissipiation incl suitable fixing arrangement on wall complete all as specified and as directed. Make: L&T, Cat No :CM90996OOOO or techno-commercially equivalent in ABB/Siemens. |
| 83 | S & F MCB, DB, TPN, 4 ways, DOUBLE DOOR, IP-54, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPE004GD or techno-commercially equivalent in ABB/LEGRAND. |
| 84 | S & F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB40630C or techno-commercially equivalent in ABB/LEGRAND. |
| 85 | S & F SPN DB, 4 Way IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed. Make: L&T, Cat No: DBSPN004DD or techno-commercially equivalent in Legrand/ABB/Siemens. Note:- The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates. |
| 86 | S & F Miniature circuit Breakers, SP,C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA complete all as specified and directed. Make : L&T, Cat No : BB10400C or techno-commercially equivalent in Legrand/ABB |
| 87 | S & F Miniature circuit Breakers, SPN,C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L&T, Cat No : BB20400C or techno-commercially equivalent in Legrand/ABB |
| 88 | S & F Miniature circuit Breakers, SP,C-Series 240 Volts of capacity 6-32 Amps as ordered with breaking capacity 10 KA complete all as specified and as directed. Make : L&T, Cat No : BB10320C or techno-commercially equivalent in Legrand/ABB |
| 89 | S & F Miniature circuit Breakers, SPN,C-Series 240 Volts of capacity 6-32 Amps as ordered with breaking capacity 10 KA complete all as specified and as directed. Make : L&T, Cat No : BB20320C or techno-commercially equivalent in Legrand/ABB |
| 90 | S & F flexible LED strip, 24 W,3000K with wide viewing angle for good light distribution, including compatible driver ,connecting of flexible wire twin core to fitting in flexible conduit complete all as specified and directed. Make : Havells, Cat No:LLHEHCPP5NN1W024 (For LED strip), Havells, Cat No:LSSLNW0150( For Driver) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
