Construction Of Residential Accommodation For Staff Of Govt. Degree College At Dharampur In Tehsil Dharampur Distt. Mandi ( Hp ) ( Sh:- C / O 6 Nos, Type-Ii, 6 Nos Type-Iii, 6 Nos Type- I And1nos Type-V Including Building Portion, Ws&Si, Septic Ta, Dharampur-Himachal Pradesh

TDR : 28681604

Tender Notice
BOQ

Expired

Dharampur , Himachal Pradesh

Tender Brief : Construction Of Residential Accommodation For Staff Of Govt. Degree College At Dharampur In Tehsil Dharampur Distt. Mandi ( Hp ) ( Sh:- C / O 6 Nos, Type-Ii, 6 Nos Type-Iii, 6 Nos Type- I And1nos Type-V Including Building Portion, Ws&Si, Septic Ta

Document Fees
₹ 5000 /-

EMD
₹ 500000.0 /-

Tender Value
₹ 5.56 Crore /-

Submission Date
13-08-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of and alldinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road and all on approved dumping sites through all modes of transportation including head load and all animals transport and all mechanical means alongwith its levelling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required.Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. . The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
2	Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry and all saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as perdirected by the Engineer-in-Charge including entire carriage of material within all leadsand lifts, disposed materials to be neatly dressed and levelled including other incidentals.The rates are inclusive ofroyality,GST and allother taxes imposed by the Government.
3	Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting andproppingand centringetc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four)meters and removal of the same for insitu-reinforced concreteand plain concrete work upto all floor level in all heights including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
4	In foundation,footings, bases of columns, etcetera for mass concrete.
5	In flat surfaces such as soffits of suspended floors, roofs, landings, balconies and access plateformand the like floor upto any thickness upto all floor levels.
6	In columns, pillars,piers, abutmentsposts and struts square rectangular and all polygonal in plan.
7	In beams, plinth beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunchingcantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels
8	Stairs Caseswith sloping and allstepped soffits excluding landing except spiral stair cases upto all floor level.
9	Vertical surfaces such as walls (any thickness) partition and the like includingattached pillasters, buttresses, plinth andstring courses etceteraand the like in all floor heights.
10	In edges of slabs and breaks in floors and walls under any width/ height upto all floor level.
11	Small Lintels not exceeding 1.5 mtrs(One point fiveMeter) clear span, mouldings as in cornices window sills, spring courses, bands, copings, bed plates, anchor blocks and the like.
12	Providing and laying mechanically mixed 1:5:10 (one cement :five coarse sand : tengraded stone aggregate) 40 mm(forty millimetres) nominal size cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string and all lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera., up to all floor level, excluding the cost of centering, shuttering and finishing in all respect including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
13	Providing and layingmechanically mixedcement concrete 1:6:12 (One cement: six sand:Twelvegraded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specificationand curing complete but excluding cost of centering and shuttering in foundation and plinth including all heights/depths including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
14	Providing and layingmechanically mixedcement concrete M-10 with graded/crushed stone aggregate 20mm (Twenty millimetre) nominal size as per specificationand curing complete including all heights/depths but excluding cost of centering and shuttering all work upto plinth level form work in foundation and plinth including all heights/depths including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
15	Providing and layingmechanically mixedcement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specificationand curing complete including all heights/depths but excluding cost of centering and shuttering all work upto plinth level form work in foundation and plinth including all heights/depths including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
16	Providing and laying mechanically miexd and vibrated in position M-20 (M-Twenty) grade of reinforced cement concrete to obtain the minimum crushing strength of 20n/m2 ( Twenty Newton per milimiter square with minimun cement 380kg per cubic metre (three hundred eighty kilogramme per cubic metre)graded stone aggregate 20 mm (twenty millimetres) nominal size) all work up to plinth level excluding the cost of centering, shuttering, finishing and reinforcement including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
17	Providing and layingmechanically miexd and vibrated in position specified grade of M-20 (M-Twenty) cement concrete to to obtain the minimum crushing strength of 20n/m2 ( Twenty Newton per milimiter square) with minimun cement 380kg per cubic metre (three hundred eighty kilogramme per cubic metre)graded stone aggregate 20 mm (twenty millimetres) nominal size) all work up to plinth level excluding the cost of centering, shuttering,including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand allother taxes imposed by the Government.
18	Providing and laying Reinforced cement concreteM-25 (M-Twenty five) design mix gradred stone aggregate 20mm (Twenty millimetre) nominal size and cement contrete not less then 400kg/cum (Four hundred killogram per cubeic metre) to obtain the minumum crusing strength 25n/m2 ( Twenty Five Newton per millimeter square machine batched and machine mixed and vibratedin walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera.above plinth to all floor levelsincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and allother taxes imposed by the Government.
19	Providing and laying Reinforced cement concretemachine batched and machine mixed and vibrated in reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen) Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcementabove plinth to all floor levelsincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
20	Providing and fixing up to all floor level precast cement concreteM-25 (M-Twenty five) design mix gradred stone aggregate 20mm (Twenty millimetre) nominal size and cement contrete not less then 400kg/cum (Four hundred killogram per cubeic metre) to obtain the minumum crusing strength 25n/m2 ( Twenty Five Newton per millimeter square graded stone aggregate 20mm nominal size) string and all lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etcetera, including hoisting and setting in position with cement mortar 1:3 (one Cement : three coarse sand), cost of required Centering completeincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
21	Providing, hoisting and fixing above plinth level up to all floorlevel precast reinforced cement concrete in mouldings as in cornices, windows sills etcetra, including setting in cement mortar 1:3 (one cement : threecoarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with M-25 (M-Twenty Five) grad design mixgraded stone aggregate 20 mm (twenty millimetrenominal size)to obtain the minumum crusing strength 25n/m2 ( Twenty Five Newton per millimeter square with cement concrete not less then 400 kg/cum (Four hundred killogram per cubeic metre)including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
22	Providing and laying Mild steel and Medium Tensile steel bars Fe 500Dmade ofSAIL,TISCO, TATA, JINDAL, RINL, PANTHER & (JSPL) Shyam steel for reinforcedcement concrete work including straightening, cutting, bending, placing in position and binding allcomplete upto plinth level andaboveplinth level upto all floor levelsincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
23	Providing and laying in position machine batched and machine mixed and vibrated design mix M-25( M-twenty five) grade cement concrete for reinforced cement concrete work,to obtained minium crushing strength of 25N/mm2 (Twenty five ) Netwon per millimetres square) with minium cement contents of 400Kg/Cum (Four hundred killogramme per Cubic metres)using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-chargein all heights/ depthincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
24	All works upto plinth level.
25	All works above plinth level upto allfloorlevel.
26	Providing weep holes in brick masonry/stone masonry, plain reinforced concrete abutment, wing walls, return walls,retaing walls and Breast wallswith 100mm (One hundred millimeter) diameter PVC Pipe made of D-plast finolexhaving working pressure not less than 4.50 Kg P/Sq cm (four point five Killogramme per Squarecentimetres) extending through the full width of structures with slope of 1 one (Vertical) : 20 ( Twenty)(Horizontal) towards drawing face complete as per drawing and technical specifications clauses 614, 709, 1204.3.7including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
27	Stone filling /Solingunder floors tightlyhand packedupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GSTand all other taxes imposed by theGovernment.
28	Random rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement :sixsand : Twelvegraded stone aggregate 20 mm (Twenty) Millimetres nominal size) with Cement Mortar 1:6( One cement: Six course sand) and curing complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Govt.
29	Supplying and Filling in plinth with sand under floors, including watering, ramming, consolidating and dressing completeincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and allother taxes imposed by the Government.
30	Filling with brick agreegate in soak pit with consolidating and dressing completeincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
31	Providing and laying damp proof course 40mm (Forty milimetres ) thick with cement concrete 1:2:4 ( One cement : two sand : four gradedstone agregate 12.5mm ( Twelve decimal five milimetres ) nominal size curing completeincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
32	Providing and Applying a coat of residual petroleum bitumen of grade of VG-10 (VG-ten) of approved quality using 1.7kg/sqm (One point seven) Kilogramme per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
33	Providingunder layer for plinth protection of 75 mm(Seventy five millimeters) thick (unconsolidated) bed dry brick/stone aggregate 40mm (Forty millimeters) nominal size with well rammed and consolidated and grouted with finesand including preparation of ground complete in all respectupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
34	Making plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand (zone - III): six gradedstone aggregate 20mm (twenty millimeter) nominal size) over 75 mm(seventy five millimetres) thick bed of dry brick bllast 40 mm(forty millimetres)nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and derssing and finishing the top smooth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
35	Providing and laying Precast concrete hollowblock masonry in partition walls 15 cm.(fifteen) centimetresthick with hollow block of approved size including quion blocks, jamb blocks, closer etcetra. made of cement concrete 1:3:6 (one cement: three sand: sixgraded stone aggregate 20mm (Twenty) millimetres nominal size laid with cement mortor 1:6( One cement into six sand)and curing completeupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GST and all other taxes imposed by the Government.
36	Providing and laying Precast concrete solid block masonry in partition walls 10 cm.(Ten) centimetresthick with solid block of approved size including quion blocks, jamb blocks, closer etcetera made of cement concrete 1:3:6 (one cement: three sand: sixgraded stone aggregate 20mm (Twenty) millimetres nominal size laid with cement mortor 1:4( One cement into four sand)and curing completeupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
37	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five)insuper structure above plinth level upto all floor level incement mortar 1:6 (onecement : six course sand) curing complete including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
38	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five)in superstructure above plinth level up to all floor levelsinCement Mortar 1:3( One cement: threesand)and curing completeincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
39	Providing and fixing 20mm (Twenty millimetre) nominal dia chromium plated brass curtain rod having wall thickness of 1.25mm (One point two five) millimetres with two chromium plated brass brackets fixed with C.P. Brass screws and PVC sleeves etcetera, upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
40	Providing and fixingM.S grills of required pattern in frames of windows etcetera with M.S falts, square or round bars etcetera including primeing coat with approved steel primer all complete fixed to steel windows by weldingincluding entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
41	Providing 40x3 (Forty into threemillimetres) flat iron hold fast 40(Forty) centimetres Long including fixing to frame with 10(Ten) millimetres diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15 ( Thirty into ten into fifteen) centimetres. 1:3:6 ( one cement : three sand: six graded/crushedstone aggregate 20(twenty millimetres) nominal size including entire carriage of material within all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Govt.
42	Providing and fixing 300×16mm (Three hundred into sixteen millimetre) nominal sizeaaluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868), transparent and all dyed to required colour and all shade, with nuts and screws etcetera complete upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.TThe rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
43	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868 ) transparent and all dyed to required colour and all shade, with necessary screws etcetera completeupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
44	250x10mm (Two hundred fifty into ten millimetres)
45	150x10mm (onehundred fifty into ten millimetres)
46	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent and all dyed to required colour and all shade, withecessary screws etc aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868) transparent and all dyed to required colour and all shade, with necessary screws etcupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
47	125mm (one hundred twenty five millimetres)
48	100 mm (one hundred millimetres)
49	Providing and fixing aluminium hanging type floor door stopper, ISI marked, anodised Twin rubber stopper (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent and all dyed to required colour and shade, with necessary screws etcetera complete. upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
50	Providing and fixing 65 x35 mm( sixty five into thirty five millimetres ) special quality chromium brass cup board lock with six leavers with necessary screws etcetera complete upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
51	Providing and fixing 150 (One hundred fifty) millimetres M.S.bright finsihed hard drawn hooks eyes brass including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
52	Providing and fixing 150 mm( one hundred fifty millimetres ) oxidized M.S. double acting spring hinges with necessary screws etcetera complete upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
53	35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer\"s specification and direction of Engineer-in-chargeincluding entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
54	Providing and fixing 19mm thick( ninteenmilimetre) made of action teasa thick terramite resistant water proof commercial boardbox including shelves and shutters, theback side of cupboard/cabinet of 8mm(Eight milimetre) thick ply and cut portions of shelves shall be finished with 6mm six milimetres) hard board edging. The cut portion of shutters from all the sides shall be finished with 12 mm thick hard wood edging. the shutters from out side shall be finished with 1mm thick laminated of approved shade includng piano hinges and magnetic catcher with all ascessories as per detail architectural drawing No. 195/1 to 199/1 including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
55	Providing and fixing 19(Ninteen) millimetres thicktermite resistant water proof Commercial Board shutters with hard wood edging andconfirming to IS- No.1659 ofNOVAPAN , ARCHIDPLY, ACTION TESA,GREEN,NATIONAL,KITPLY make shuttersi/c fixing with nickel plated piano hinges with screws etc and PGI sheet linning inside completeupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
56	Structural steel work riveted, bolted and all welded in built up sections,, made of Tata, Jindal, trusses andtrusses, in pertions in buildingframed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
57	Steel work welded in built up sections, made of Tata Jindal, in framed work steel inbeams joints, chanal angle tee,flat guard bars, flats with connecting plates and all angle cleats as in main and cross beams,hip and jack rafters, Ladders, railings , Brackets and Similar workincluding cutting, hoisting, fixing in position and applying a priming coat ofred lead paint upto all floor level in all heightscompleteupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
58	Providing and fixing M.S. fan clamp type I and all II of 16 mm ( One and all twoofsixteen) millimetres dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs and all beams during laying, including painting the exposed portion of loop, all as per standard design completeincluding entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
59	Providing and fixing M.S channels door, windows frames manufactured from M.Ssection ISMC 75 X40 MM & ms.Flat 75x5 mm as per direction of Engineer-in -charge and drawing including hinges jambs bead and if required angle threshold M.S.Angle 50x25 mm welded and all rigidly fixed by mechanical means with split end tails to each jamb including steel butt hinges 25 mm and provision of lacking arranement and shock observer as specified and applying a coat of approved steel primer after pretreatment of surface including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
60	Providing and fixing M.S channels door, windows frames manufactured from M.Ssection ISMC 75 X40 MM & ms.Flat 75x5 mmin combination welded together and standard window shutter having style of Z-section with T-section of 25x25x3mm and angle iron 25x15x3mm as per drawing complete with fitting and necessary screws and applying a priming coat with red lead paint complete as per approved specification/design.including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
61	Side hunge
62	Fixed
63	Top hunge
64	Providing and fixing steel wire gauge shutter in Z-section using galvanised M.S wire gauge of I.S. gauge designation 85g with wire of dia 0.56mm for doors, windows and clerestorywindows with metal beading of approved quality and shape -section with necessary screws and applying a coat of primer with red lead paint complete as per approved design including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
65	Providing and fixing 40mm thick (forty millimetre) wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85g. With wire of dia 0.56mm for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
66	Precast terrazo tiles 22 mm (twenty two milimetre) thick with graded marble chips of size upto 12 mm (twalve milimetre), laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm (twenty milimetre) thick bed of cement mortar 1:4 (one cement:four coarse sand) iight shade pigment using white cement including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
67	Extra if terrazo tiles are laid in treads of steps not excedding 30 cm (thirty centimetre) in width.including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
68	Precast terrazo tiles 22 mm (twenty two milimetre) thick with graded marble chips of sizes upto 12 mm,(twalve milimetre) in skirting and risers of steps not exceeding 30 cm (thirty centimetre) in height, on 12 mm thick cement plaster 1:3 (one cement : three coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of light shade pigment using white cement including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
69	Marble stone flooring with Udaipur Green Marble 18 mm thick eighteen milimetre) marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
70	Kota stone slab flooring 25mm thick (twenty five milimetre) over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) including rubbing and polishing complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
71	White glazed tiles 6 mm thick (six milimetre)in skirting risers of steps and dado12 mm (twalve milimetre) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurryincluding entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
72	Providing and Laying 8mm (eight milimetre) ThickAnti Skid Ceramic tile 300 x 300 mm (three hundred into three hundred milimetre) in flooringbase of cement 12 mm (twalve milimetre) thick cement mortar 1:3 (one cement :three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
73	Providing and Laying 8mm (eight milimetre) Thick (eight milimetre) Anti Skid Ceramic tile 300 x 300 mm (three hundred into three hundred milimetre) in Skirtingbase of cement 12 mm (twalve milimetre) thick cement mortar 1:3 (one cement :three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
74	Providing and fixing 0.60mm ( Zero point sixty millimeter) thick pre-painted steel sheet of TATA/ /DUROSHINEin roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) and allganic coating of 20 ( Twenty ) micron over 5 ( Five ) miocrons primer coating to back coat of polyster of 5 ( Five )microns over 5 ( Five) microns primer coating including fixing with pre-paintediron J and all L hooks, bolts and nuts , 6mm diametre with prepaintedlimpet and rubber washers complete with all accessories as required including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
75	Providing and fixing ridges and all hips 90cm. (Ninety centimetres) overallwith0.60mm (Zero point sixty millimeter) thickprepainted steel sheets TATA/ /DUROSHINE in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyesterand allganiccoating of 20 (Twenty )microns over 5 ( Five ) micron primer coating + backcoat of polyster of 5( Five) microns over 5micro primer coating including fixing with prepaintediron, J and all L hooks bolts and nuts ,6mm(Six milimetre) diametre and prepainted G.I limpet and bitumen washer complete with all accessories as required including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
76	Providing and fixing valley 60 cm (sixty centimetre) overall 0.60 mm (sixty milimetre) thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheet with top coat of regular modified polyster and allganic coating of back coat of polyster 5 microns over 5 micronsprimer coating including fixing with screws prepainted iron J and all L hooks, bolts and nuts 6mm (six milimetre) dia meter with prepainted GI limpet and bitumen washers complete with all accesories as required as per the direction of Engineer-in-charge including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
77	Providing and fixing flushing 38cm (thirty eight centimetre) overall with 0.60mm (sixty centimetre) thick prepainted steel sheet in roofing with dipped metallic zinc coated sheet with top coat of regular modified polyster and allganic coating of 2o microns( twenty micrins) over 5 microns (five micrins) primer coating Plus back coat of polyster of 5 microns (five micrins) over 5 microns (five micrins) primer coating icluding fixing with screws prepainted iron J and all L hooks, bolts and nuts 6mm diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government. .
78	Providing and fixing 30 cm. (thirty centimetre) wide & 30 cms (thirty centimetre)deep minimum semicircular plain G.I. sheet gutter over angle /T angle frame work with iron bracket 40x3mm (forty into three milimetre) size bolts and nuts and washers etcetera including making necessary conections with rain water pipe complete as per design. 0.80 mm (eighty milimetre) thick with zinc coating not less than 275 gm/m2 including (two hundred seventy five gramme per square metre) entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government. .
79	Providing and fixing M.S B.P sheet 1.66 mm to 2 mm ( One point sixty six millimeter to two millimeter)thick in eaves board/facia/soffits/ceiling including cutting , fixing and welding to steel roof members and applyinga coat of red lead primer complete as per the direction of the Engineer-in-Charge (base member of steel work shall be measured and paid for separately) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government. .
80	Providing and fixing 8mm (eight milimetre) thick cement bounded particle board ceiling of approved quality (frame work and cover fillets to be paid for separately.) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government. .
81	Providing and fixing 6mm thick (six milimetre) cement bounded particle board ceiling of approved quality (frame work and cover fillets to be paid for separately.) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government. .
82	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm (fifteen centimetre) diameter and weighing not less than 440 grams (four hundred forty gramme) .including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government. .
83	Providing and fixing 110 mm (one hundred ten milimetre) on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion, (i) Single socketed pipes.including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government. .
84	Providing and fixingon wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion.
85	110 mm (one hundred ten milimetre) plain bend
86	110mm (one hundred ten milimetre) dia P.V.C. shoe
87	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into fifty milimetre)hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etcetera complete. 110 mm (one hundred ten) dia including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
88	15 mm (fifteen milimetre) cement plaster on the rough side of single and all half brick wall of mix 1:6 (one cement : six fine sand) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
89	15 mm (fifteen milimetre) cement plaster on the fair side of single and all half brick wall of mix 1:6 (one cement : six fine sand) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
90	20 mm (twenty milimetre)cement plaster on the rough side of single and all half brick wall of mix 1:3 (one cement : three fine sand) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
91	6 mm (six milimetre)cement plaster of mix: 1:3 (one cement : three fine sand) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
92	Pointing Flush/ Ruled pointing on stone work with cement mortar 1:3 (one cement : three fine sand) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
93	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two and all more coats) over and including water thinnable priming coat with cement primer including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
94	Finishing walls with 100% (one hundred precent)Premium acrylic emulsion paint having VOC less than 50 gm/litre (fifty gramme per litter)and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives (New work (Two and all more coats applied @ 1.43 litre/ 10 sqm. (one point forty three liter per ten square metre)over and incouding priming coat of exterior primer applied @ 0.90 litre/ 10 sqm.(zero point ninty liter per ten square metre)including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
95	Providing and applying white cement based putty of average thickness 1 mm, (one milimetre)of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
96	Painting with oil type wood presservative of approved brand and manufacture: (Old work (one and all more coats) including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
97	Painting wood work with Deluxe Multi Surface Paint of required shade. Two and all more coat applied @ 0.90 ltr/10 sqm. Over an under coat of primer applied @ 0.75 ltr/ 10 sqm. Of approved brand and manufacture including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
98	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two and all more coat applied @ 0.90 ltr/ 10 sqm (zero point ninty liter per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eighty liter per ten square metre) of approved brand and manufacture including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
99	Providing and fixing MS railing for stair case having balluster of 19mm x19mm (ninteeninto ninteen milimetre) square bar with a clear height of 85cm (eighty five centimetre) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm size complete with a applying priming coat of red lead paint including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
100	Providing and fixing 75mmx65mm (seventy five into sixty five milimetre) with M.S. flat 40x6mm (forty into six milimetre) welded to the balluster rounded hand rails in straight lenth complete in hard wood hand rail including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
101	Providing and fixing moulded hand rail of M.S. hollow pipe 50mm (fifty milimetre) dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely.including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
102	Providing and laying water proofing treatment, by applying cement slurry mixed with water proofing cement compound of Dr.Fixit Padfin and all equivalent consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm. (zero point four hundred eighty eight kilograme per square metre) Mixed with water proofing cement compound @ 0.253 kg/sqm.(zero point two hundred fifty three kilograme per square metre) This layer will be allowed to air cure for 4 hour. (b) Second layer of slurry of cement @ 0.242 kg/sqm(zero point two hundred forty two kilograme per square metre) mixed with water proofing cement compound @ 0.126 kg/sqm (zero point one hundred twenty six kilograme per square metre).This layer will be allowed to air cure for 4 hours (four hours) followed with water curing for 48 hours. (forty eight hours) The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
103	Constructing Coursed rubble hammer dressed \"U\" shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter )in cement mortar 1:6 ( OneCement : Six approved Sand) and inside plastering with cement mortar 1:3 (OneCement:Three approved Sand) including earth work and laying 10 cm(Ten Centimatre ) cement concrete in 1:5:10 (OneCement : Fiveapproved Sand : Tengradedcrushed stone aggregate) of 40 mm (Forty millimetres)nominal size and7.5 cm (seven Point Five Centimatre )cement concrete 1:2:4 (OneCement : Twoapproved Sand : Fourgradedcrushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with afloating coat of neat cementcomplete as per standard design.including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
104	Providing and fixing Glass Reinforced Concrete ((G.R.C) Screens in approved size, pattern, design, thickness and color and all M/S Unistone make and all equivalent. The Screens should be made from \"53 (fifty three) grade\" White Portland cement manufactured by \"JK Cement\" and all equivalent. Quartz. Fine Silica Sand, Alkai Resistant Glass Fiber manufactured by Saint Gobain\" and all equivalent. Super Plasticizers manufactured by BASF and all equivalent. Polymers manufactured byBASF and all equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by BAYFERROX (Germany) and all equivalent. The material casting should take place in Synthetic Rubber/FRP Mould manufactured by \"Reckli\" and all equivalent. The fixing of Screens should be \"Dry fixing\" i.e. to be done with Stainless Steel (SS- 304) \"L\" shaped Clamps, dash fasteners and pins including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
105	Providing and fixing panelled shutter for door panel filled with 12mm thick preliminated board phenol bonded particle board ISI marked IS No. 12823 of approved shade style 40mm thick finished side and top rail 200x40mm midde rail 150x40mm complete including below enamelled iron bolt hinges with necessary screws all respect as per the speafication including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
106	Providing and fixing panelled shutter for door panel filled with 12mm thick preliminated board water proof phenol bonded particle board ISI marked IS No. 12823 of approved shade 1mm (one millimetre) thick aluminium sheet upto a height of 1 mtr. style 40mm thick finished side and top rail 200x40mm midde rail 150x40mm complete below enamelled iron bolt hinges with necessary screw in all respect as per thespecification including entire carriage of material within all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTand all other taxes imposed by the Government.
107	Providing and Fixing G.I. pipes complete with G.I. fittings including trenching and refilling etcetera of B.S.T/ JINDAL(HISSAR)/ TATA STEEL TUBES LTD /PRAKASH SURYA tube and fittings upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
108	20mm (Twenty ) millimetres dia nominal bore
109	32mm (Thirty two) millimetres dia nominal bore
110	15mm ( Fifteen ) millimetres dia nominal bore
111	Providing andMaking connection of G.I distribution branch with G.I main 25 to 40mm nominal bore (twenty five to forty) millimetres byproviding and fixing tee including cutting and threading the pipe etceteracomplete upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment..
112	Fixing water meter and stop cock in G.I. pipe line of KINGSTON /PARKO / TECHNO, JAL, JAQUAR / GE M/ ESS ESS / SEIKO makeincluding cutting and threading the pipe and making long screws etcetera complete (cost of water meter and stop cock to be paid separately).upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment..
113	Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipesmake of Kitech conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, (eighty degree centigrate) Concealed work, including cutting chases and making good the wall etcetera including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera, with clamps at 1.00 mtr(one point zero zero metre) spacing. This includes the costs of cutting chases and including testing of joints complete upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment..
114	2532(32 mm OD) (two thousand five hundred thirty two( Thirty two millimertes outer dia)pipe
115	2025(25 mm OD) (two thousand twenty five( Twenty five millimertes outer dia)pipe
116	1620(20 mm OD) (one thousand six hundred twenty( Twenty millimertes outer dia)pipe
117	1216(16 mm OD) (One thousand two hundredsixteen)( sixteen millimertes outer dia)pipe
118	Providing and fixingWhite Vitreous china and allissa pattern W.C. pan of size 580x440 mm (five hundred eighty into four hundred forty millimetrers) withintegral type foot rests water closet squatting pan (Indian type W.C. pan ) of Parryware, Hindware, Sanitaryware, Neycer, Cera.make with 100 mm (one hundred millimetrers)sand cast Iron P and all S trap, 10(ten) Litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverequired upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
119	Providing and fixing white vitreous china pedestal type water closet (European type) No.20011 with seat and lid, 10 (ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimetres) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required WC pans with ISI Marked white solid plastic seat and lidofParryware, Hindware, Sanitaryware, Neycer, Cera.makeupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
120	Providing and fixing wash basin with C.I brackets, 15mm (fifteen millimeter) C.P C.P brass pillar taps, 32mm (Thirty two millimetre) C.P brass waste of standard pattern, including painting of fittings and brackets, curtting and making good the walls wherever require (630x450mm) (six hundred thirty into four hundred fifty millimetres)white vitreous china wash basin with a pair of 15mm (Fifteen millimeter) C.P brass for pillar tap, Hindware/Parryware /CERA, Sanitary ware, Naycer makeincluding entire carriage of material within all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by the Govt.
121	Providing and fixing White vitreous china pedastal of( Hindware/Parryware /CERA /sanitary ware,Neycer make) forwash basin complete recessedat the back for reception of pipes and fittings upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
122	Providing and fixing Stainless Steel A ISI 304 (18/8) (eighten/eight) kitchen sinksize 510 x1040 mm (five hundred ten into one thousand forty) millimetresbowl depth 250 mm ( Two hundred fifty ) millimetres ofAMC, UNIK, DIAMOND, Neelkanth. make as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty millimetres) including painting of fittings and brackets, cutting and making good the walls wherever requiredupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
123	Providing and fixing PVCwaste pipe for wash basin and all sinkof Techno, Seiko make32 ( Thirty two) Millimetresdia semi rigid pipe make of Kitechupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
124	Providing and fixing uplasticisedP.V.C. connection pipe with Brass unions 450 mm (four hundred fifty millimetre)length, 15 mm(fifteen millimetre)nominal diaof make Finolexincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
125	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etcetera complete of Unik, KS, AMCO, AVR, NVR, RR, SUW makeincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
126	Providing and fixing 600mmx450mm (Six hundred into four hundred fifty millimetres) bevelled edge mirror Atul, Modi Guard ( Golden fish ) make of superior glass of approved qualitywith 6 mm (Six milliters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers completeupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
127	Providing and fixing C.P. brass long nose bib cock Cat no.CON 107KNofJaquar, JAL, ESS ESS.Kingston,Gem,Parko,Techno,Seiko make single controlof approved quality conforming to IS standards. 15 mm (fifteen millimetres) nominal bore upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
128	Providing and Fixing Swan neck pillar tap with left hand operating knob single control CON-CHR-123BKN of Jaquar, JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make complete. upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
129	Providing and Fixing C.P brass-15037PM pillar cock OPPofJaquar JAL, ESS ESS. ingston,Gem,Parko,Techno,Seiko make complete. upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
130	Providing and Fixing Angular stop cock with wall flange of opel primeno. CON 150083KNStop Cock ofJaquar JAL, ESS ESS.Kingston,Gem,Parko,Techno,Seiko makecomplete in all respect upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
131	Providing and Fixing Concealed stop cock with wall flange of opel primeno. CON 083FTKStop Cock PM ofJaquar JAL, ESS ESS.Kingston,Gem,Parko,Techno,Seiko makesingle control of jaquar and all equavalent complete in all respect upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
132	Providing and Fixing Angular stop cockwith wall flange of opel primeno. CON 053KN of ofJaquar JAL, ESS ESS.Kingston,Gem,Parko,Techno,Seiko makesingle control complete in all respect upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
133	Providing and Fixing Soap dish recessed type stainless steel AHS-1531of Jaquar and all equivalentcomplete in all respectupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
134	Providing and Fixing Soap dish stainless steel CAN -1131N of Jaquar and all equivalentcomplete in all respectupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
135	Providing and fixing Towel Rack with lower hangerNo. AHS-1581H of hotelier series of JAQUAR, and all equivalentof superior qualityupto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
136	Providing and fixing Corner glass self with bract No.ACN-1173 of hotelier series of JAQUAR, ESS-ESSof superior quality upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
137	Providing and fixingGlass shelf550 mm (five hundred fifty millimetres) long with C.P. Brass bracket and guard rail no. AQN-7771 of Jaquarfixed with C.P. Brass screws etc complete upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
138	Providing and fixing U shaped wall mounted rail with hings (600x 100) mm ( Six hundred intoone hundred millimetre )Cat No. B2210107 and wall mounted grab bar 600 mm ( six hundred millimetre) long CAT No. B2210106 jaguar and all equivalent superior quality complete upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
139	Providing and fixing 8 mm(eight millimetres) dia C.P. / S.S. Jet with flexible tube upto 1.00( one point zero zero) metre long with S.S. triangular plate to Eureopean type W.C. of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko. quality and make upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
140	Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) make of Leader,Zoloto,Kilburn,C/M, Valnes,Sant upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
141	25 mm(twenty five millimetrs) nominal bore
142	20 mm(twentymillimetrs) nominal bore
143	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etcetera complete of Unik, KS, AMCO, AVR, NVR, RR, SUW makeincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
144	15 mm(twenty five millimetrs) nominal bore
145	20 mm(twentymillimetrs) nominal bore
146	32 mm(Thirty two millimetrs) nominal bore
147	Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 (one thousand) litre make of sintex net capacity tank , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
148	Providing and fixing ball valve (brass) of approved quality of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko make, High and all low pressure, with plastic floats complete 15mm (Fifteen) millimetres nominal bore including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
149	Providing and fixing 110 mm (One hundredten millimetres) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex makeincluding fixing with approved adhesive etcetera complete including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
150	Providing and fixing 150mm(One hundredfifty millimetres)high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etcetera completeincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
151	Providing and fixing110 mm X 90 mm(One hundredten into ninety millimetres) PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera complete. including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
152	Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm ( three millimetres) thick bolts and nuts ISI marked of Finolex make complete including fixing with approved adhesive etceteraincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
153	110mm dia (one hundred ten millimetres)
154	150mm dia (one hundred fifty millimetres)
155	Providing and fixing PVC plain bend ISI marked of Finolex makeincluding fixing with approved adhesive etcetera complete.including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
156	110mm dia (one hundred ten millimetres)
157	150mm dia (one hundred fifty millimetres)
158	Providing and fixing PVC plain double equal branch ISI marked of Finolex makeincluding fixing with approved adhesive etcetera complete.including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
159	110mm dia (one hundred ten millimetres)
160	150mm dia (one hundred fifty millimetres)
161	Providing and fixing PVC single equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etcetera Complete including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
162	110mm dia (one hundred ten millimetres)
163	150mm dia (one hundred fifty millimetres)
164	Providing and fixing PVC collars ISI marked of Finolex make including fixing with approved adhesive etceteracomplete including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
165	110mm dia (one hundred ten millimetres)
166	150mm dia (one hundred fifty millimetres)
167	Providing and fixing PVC clamps ISI marked of Finolex makeof approved design with steel screws and rawal plugs etcetera Complete including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
168	110mm dia (one hundred ten millimetres)
169	150mm dia (one hundred fifty millimetres)
170	Providing and fixing 110( one hundred ten)millimetresdia PVC cowl of approved design of makeFinolex, Prince, Kissan, SFMC, Diplast accessories upto all floor levels in all heights/ depth including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
171	Constructingbrick masonry manholein cement mortor 1:4 (One cement: four Sand) With Sewer bricks conforming to IS : 4885 with RCC top slab in 1:1.5:3 mix (One cement : one point fivesand : three graded stone aggregate ) 20mm (Twenty millimetres) nominal size foundation concrete 1:4:8 ( One cement : foursand : eight graded stone aggregate 40mm (Forty millimetres) nominal size)inside plastering 12mm (Fifteen millimetres) thick with cement mortar 1:3 (One cement : threesand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : twosand : four graded/crushed stone aggregate 20mm (Twenty millimetres nominal size) finished with a floating cot of neat cement complete as per standard designsmooth complete in all respect including curing and testing Inside size 120x90 cm (one hundred twenty into ninety centimetres) and 90 cm (ninety centimetres) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetrrs) internal diameter, total weight of cover and frame to be not less than 116 kg(one hundred sixteen killogramme) (weight of cover 58 kg (fifty eight killogramme) and weight of frame 58 kg (fifty eight killogramme) including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
172	Constructing soak pit 1.20x1.20x1.20 m (one point twozero into one point twozero into one point twozero ) metre filled with brickbats including S.W. drain pipe 100 mm (hundred millimetres) diameter and 1.20 m (one point two zero) metre long complete as per standard designincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
173	Constructing masonry Chamber 90x90x100 cm(ninety into ninety into one hundred centimetres) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100 mm(one hundred millimetres) top diameter, 160 mm (one hundred sixty millimetres) bottom diameter and 180 mm (one hundredeightymillimetres)deep (inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetres) nominal size ), (including) necessary excavation, foundation concrete 1:5:10(one cement : five fine sand : ten graded stone aggregate 40 mm (forty millimetres) nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (twelve millimetres) thick, finished with a floating coat of neat cement complete as per standard designincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
174	Providing and laying 450 mm ( Four hundred fifty millimetres) dia RCC pipesNon pressureNP-3 (three)Class (Medium duty) R.C.C.Pipes includingcollars/ spigotjointed with stiff mixture of cement mortar in the proportion of 1:2 ( one cement : two fine sand) including testingof joints etcetra complete including entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.
175	Providing and fixing in positionCircular shape 450 mm (four hundred fifty millimetres internal diamete pre-cast R.C.C. Manhole cover and frame of required shape and approved qualityincluding entire carriage of material within all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST and all other taxes imposed by theGovernment.

Also Visit

Tenders

Himachal Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Residential Accommodation For Staff Of Govt. Degree College At Dharampur In Tehsil Dharampur Distt. Mandi ( Hp ) ( Sh:- C / O 6 Nos, Type-Ii, 6 Nos Type-Iii, 6 Nos Type- I And1nos Type-V Including Building Portion, Ws&Si, Septic Ta, Dharampur-Himachal Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Residential Accommodation For Staff Of Govt. Degree College At Dharampur In Tehsil Dharampur Distt. Mandi ( Hp ) ( Sh:- C / O 6 Nos, Type-Ii, 6 Nos Type-Iii, 6 Nos Type- I And1nos Type-V Including Building Portion, Ws&Si, Septic Ta, Dharampur-Himachal Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us