|
| 1 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : |
| 2 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 4 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 5 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : |
| 6 | 2nd class teak wood |
| 7 | 50x12 mm |
| 8 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 9 | Fixed to openings /wooden frames with rawl plugs screws etc. kg |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 11 | 200x10 mm |
| 12 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 13 | 125 mm |
| 14 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 15 | Twin rubber stopper |
| 16 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 17 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 18 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : |
| 19 | Raj Nagar plain |
| 20 | Udaipur green marble |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 22 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 23 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 24 | Water thinnable cement primer |
| 25 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 26 | Float glass panes of thickness 5.5 mm |
| 27 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 29 | One or more coats on old work |
| 30 | French spirit polishing : |
| 31 | One or more coats on old work |
| 32 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 33 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : |
| 34 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 35 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 36 | Providing and fixing floor mounted, white vitreous china singlepiece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated whitevitreous china cistern of capacity 10 litres with dual flushingsystem, including all fittings and fixtures with seat cover, cisternfittings, nuts, bolts and gasket etc including making connectionwith the existing P/S trap, complete in all respect as perdirections of Engineer-in-Charge. |
| 37 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 38 | 15 mm dia nominal bore |
| 39 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 40 | 45 cm length |
| 41 | 15 mm nominal bore |
| 42 | Providing and fixing of C.P. Towel rack of size 24\" long with five pipes of Jaquar make model no. ACN-1181FHS and equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. |
| 43 | Providing and fixing of CP Angle valve with wall flange of Jaquar make model no. CON-059KNand equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. |
| 44 | Providing and fixing of CP 2 in 1 Angle valve of Jaquar make MQT-526A and equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. |
| 45 | Providing and fixing of CP BOTTLE TRAP of Jaquar make model no. ALD-769L300X190 and equivalentmake as per direction of Engineer -in-Charge.Sample available in sub-Division I. |
| 46 | Providing and fixing of Jet spray for English WC with 1 mtr. PVC tube (S.S.) of Kingston make model no. AGR-2015A and equivalentmake as per direction of Engineer -in-Charge Sample available in sub-Division I. |
| 47 | Providing and fixing of Jaquar Wash basin mixer make model no. CON-167KNB and equivalent as per direction of Engineer in charge. Sample available in sub-Division I. |
| 48 | Providing and fixing of CP brass bib cock with wall flange of Jaquar make model no. CON-047KN and equivalentmake as per direction of Engineer -in-Charge. Sample available in sub-Division I. |
| 49 | Providing and fixing of C.P. Shop disk of Jaquar make model no. ACN-1131N and equivalent make as per direction of Engineer -in Charge.Sample available in sub-Division I. |
| 50 | Credit for dismantling C.P.Brass sanitary & water supply fittings as per Direction of Engineering-in-charge. |
| 51 | Providing and fixing of CP paper holder of Jaquar make model no. ACN-1153S and equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. |
| 52 | Providing and fixing of C.P. Brush & paste holder of Jaquar make AQN-7741 and equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. |
| 53 | Rubbing and polishing on old marble/granite work/stone flooring, dado, lining etc. Wherever required to give high gloss finish complete as per the direction of engineer-in-charge. |
| 54 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (a) Rectangular shape 650x450 mm |
| 55 | Providing and fixing of CP over head shower 120 mm dia. with shower arm long round shape with wall flange of jaguar make model no. OHS-1789 and equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. |
| 56 | Wall painting with plastic emulsion paint of\"Royale luxury emulsion paint\" of Asian paint or \" Silk Luxury emulsion paint \" of Berger paint or equivalent to give an even shade and as per sample approved by the of Engineer-in-charge. (a) Two or more coats on old work |
| 57 | Dismantling PE-AL-PE Composite pressure pipe (external work) including excavation and refilling trenches after taking out the pipes, manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge: 15 mm to 40 mm nominal bore |
| 58 | Providing and fixing of Economy handle set door lock of SS (Silver chrome) ART No-ZOVI LOCK SET Of DOR SET make and as per direction of Engineer-incharge. |
| 59 | Providing and applying white cement based putty of average thickness 0.5 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 60 | Add 15.69% as cost index on DSR 2016 on Item No. 01 to 22.01 of Rs. 12,22,668/- |
| 61 | Less 9.50% as per Delhi Govt. Circular on DSR 2016+C.I. i.e. on Rs. 14,14,505/- |
