Military Engineer Services-MES has published Certain Repair To Flooring Brick Work Roof Sunken Treatment Joinery Tiling Of Wall Flooring Roofing Sanitary And Plumbing Works In Otm Amd Md Accn Of 6 Mtn Dou And 883 At Bn Asc Office Complex Of Ge E Bly Aoi Stn Gym Swimming Pool T 68 And Ncc Gp Hq Cert. Submission Date for this Tender is 26-08-2021. Shed Construction Tenders in GE EAST BAREILLY Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Aug-2021 | REVISED BOQ | BOQ | 19-08-2021 |
| 2 | 19-Aug-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-08-2021 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer - in -Charge. |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 3 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.complete all as specified and directed |
| 4 | M& L cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed by Engineer-in-Charge. |
| 5 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 6 | Demolition concrete of any description and in any position not otherwise specifically provided cement concrete complete all as specified and directed |
| 7 | Dismantling structural steel work including doors , gates but excluding framed truss etc complete all as specified and directed |
| 8 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge. |
| 9 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge. |
| 10 | Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engineer-in-Charge. |
| 11 | Taking up or down15 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge |
| 12 | Taking up or down20 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge |
| 13 | Dismantling water tanks500 ltr& n exc 1000 ltrand removing to store of all retrieved material complete all as specified and directed |
| 14 | M&L 15mm thick rendering in cement mortar 1:4 to brickmasonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed |
| 15 | M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed. |
| 16 | M& L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed |
| 17 | M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. |
| 18 | M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. |
| 19 | M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 20 | M&L for Glazed ceramic coloured tiles in verticle surface (300x200mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 21 | M & L for7 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile area(300x450/300x600 mm size approved by GE), as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. |
| 22 | M&L for vitrified glazed ceramic coloured/ double charged / ultra charged tiles 9-10 mm thick square/ rectangular) polished area of each tile 800 mmx 800 mm/ 600mmx1200 mm size approved by GE in floors etc. set and jointed in neat cement slurry and pointed in matching colour5 mm thick epoxy filling in between tilingcomplete all as specified and directed. |
| 23 | M&L for vitrified glazed ceramic coloured / double charged / ultra charged tiles 9-10 mm thick square/ rectangular) polished area of each tile tile 800 mmx 800 mm/ 600mmx1200 mm size as in vertical surfaces such as skirtingset & jointed in pointed in matching colour 5 mm thick epoxy filling in between tiling complete all as specified and directed. |
| 24 | M&L for vitrified colouredtiles 9-10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm on floor, set and jointed in neat cement mortar and pointed in white or coloured cement to match complete all as specified and directed. |
| 25 | M&L for vitrified colouredtiles 9-10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqmin vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 26 | M&L for vitrified ceramic exterior heavy duty out door colouredtiles12 mm thick (Square/rectangular) polished area of each tile sizenot exceeding 0.36 sqm on floor set and jointed in neat cement mortar and pointed in white or coloured cement to match complete all as spd as directed |
| 27 | M&L 15-18 mm thick granite of black colour(tablee rubbed and polished) as in windows cill , in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed. |
| 28 | M&L 15-16 mm thick Italian marble( composite)in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of marble complete all as specified and directed. dust with admixture of pigment to match with shade complete all as spd & as directed. |
| 29 | M&L for 15-16 mm thick Italian marble( composite) on vertical surfaces 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with notching complete all as spd & as directed . |
| 30 | M & L for 75mm thickPCC 1:3:6 , type C-2( using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in lengthexposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed . |
| 31 | M&LSand filling under floors or in foundationincluding watering and consolidation complete all as specified and directed |
| 32 | M&L forMachine pressedcement concrete factory made coloured glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of80mm thickness, M-40 Grade,machine pressed of pattern and colour as approved by GE complete all as specified and directed. |
| 33 | M&L forMachine pressedcement concrete factory made coloured glazed interlocking paver block any shape and size confirming toIS 15658 -2006 of100mm thickness, M-50 Grade,machine pressed of pattern and colour as approved by GE complete all as specified and directed. |
| 34 | M&L for PCC (1:2:4) type B1 (using 20mm graded aggregate)for machine pressesd precast cement concrete kerb stone 300x150x450mm including weathering, slightly rounded or chemferred angles and throating , as directed edges complete including excavavtion for kerb stonecomplete all as specified and directed |
| 35 | M&L for precast cement concrete louvres and jalliestype B0 1:2:4 using (12.5 mm graded aggregate) 25mm thick (measured solid) including fixing with all molding post frame all as spd and directed. (Note:- Design of RCC Jalli shall be as approved by GE) |
| 36 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed |
| 37 | M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished without using extra cement complete all as specified and directed. |
| 38 | M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cementto on brick masonary wall surfaces or on other than fair faces of brick masonaryfinishedeven and smooth without using extra cementcomplete all as specified and directed. |
| 39 | M&L rendering 5 mm thick in CM 1:3as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 40 | M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed. |
| 41 | M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed by Engineer-in-Charge.(Note : Water proofing liquid shall be measured and paid separately as "SUPPLY ONLY") |
| 42 | Supply and fix APP polymeric water proofing membrane, minimum 3 mm thick and weight 4 kg per Sqm with mineral, minimum 3.5 kg per Sqm without mineral weight make Dr fixit tochshield membrane/equivalent with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant by Dr fixit/ equivalent or M/S IWL Ltdmanufactured byHyperplas Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd}at the rate of 0.50 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 100 mmand sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructionscomplete incl removal of existing treatment all as specified and as directed.Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate with using Dr fixit pidilite LW(+) , of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 85/25 confirming to IS-73, applied@1.20 Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.30 Kg/Sqm(ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii)The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv)In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with two coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate. |
| 43 | supply onlyIntegral water proofing Liquid of Dr fixit/sika/Fosroc |
| 44 | M&L PCC 1:5:10 type E-2 ( using 40 mm graded crushed stone aggregate) as in sunken sub base of floor, fillings with broken brick aggregate complete all as specified and directed |
| 45 | S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed. |
| 46 | M & L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 4mm thick and weighing above 4.0 Kg/Sqm of make Dr fixit tochshield membrane with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant by Dr fixit orM/S IWL Ltd manufactured by HyperplasPvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd}at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer"s instructionsincluding preparation of surface by removing the existing treatment, complete all as specified an as directedNote :-(i) Polymeric membrane shall belaid in sunken floor and on sides up to finished floor level.(ii)The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii)Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately |
| 47 | S & F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as spd as directed |
| 48 | S&F for 40 mm thick factory madeflush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed . |
| 49 | S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge. (Note :- S & F wire messshall be measured and paid for separately) |
| 50 | S & F 150 mm long floor door stopper of brass body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed |
| 51 | S & FSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing |
| 52 | S&F 30 mm thick Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 53 | S&F mild steel window grills box typeframed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 complete all as specified and directed. |
| 54 | S&Ffor steel windows/ventilators conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Wire clothshall be measured and paid for separately). |
| 55 | S&F for steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Glassshall be measured and paid for separately). |
| 56 | S&F for steel ventilators fixed type, with glazing bars completewelded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Glassshall be measured and paid for separately). |
| 57 | M&L for 3mm thick sheet glass ordinary qualityand glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 58 | Hacking outold, broken glass (any thickness,) size quality or description) from metal frames incl.punching or drilling out old glazing pins/spring clips and fixing new ones inclM&L for 3mm thick sheet glass ordinary qualityand glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 59 | S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples in m s window / wooden shutter complete all as specified and directed |
| 61 | S&F aluminium alloypowder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete.( Make of Aluminium section shall be JINDAL/INDULCO or equivalent as approved by GE) |
| 62 | S&F aluminium alloypowder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type ) fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver , withS S hinges complete (g) Making good of wall surface to match with existing surface complete .( Make of Aluminium section shall be JINDAL/INDULCO or equivalent as approved by GE) |
| 63 | S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on threetracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below-(i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over.(iii) Aluminium beading - 0.7mm thick(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings suchaluminium suitable handle with auto interlocking closing (vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.( Make of Aluminium section shall be JINDAL/INDULCO or equivalent as approved by GE) |
| 64 | S&F Powder coated aluminium sliding windows and frame with movable shutter ( sliding on minimum two PVC roller of best quality on two tracks Aluminium composite panel shutter fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below-(i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over.(iii) Aluminium beading - 0.7mm thick (iv) Aluminium fittings such as aluminium suitable fittings for auto interlocking closing (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.( Make of Aluminium section shall be JINDAL/INDULCO or equivalent as approved by GE) |
| 65 | S&F Powder coated aluminium ventilators box type with louvers & wire mess neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter: 19x38x1.48mm thick and over.(iii) Aluminium beading - 0.7mm thick (iv) Aluminium neccessary fittings complete as required basis. (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.( Make of Aluminium section shall be JINDAL/INDULCO or equivalent as approved by GE) |
| 66 | S & F for aluminium powder coated frame hollow sections members of size 63.50 mm x38mmx 1.48mm thick,4 mm thick aluminium composite panel LDPE core with PET coating fixed with into the wall for kithen cabinet/ cupboard shelf incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on pvc edging, design of shelfas per site requirements basis, complete all neccessary fittingall as specified and directed. ( Make of Aluminium section shall be JINDAL/INDULCO or equivalent as approved by GE) |
| 67 | S & F partition wall of powder coated aluminiumhollow sections members of size 63.50 mm x38mmx 1.48mm thick withdistance of vertical hollow section, 1.2mtr to 1.8 mtr height of wallhaving top rails ,bottom rails and middle rail of size 63.50 mm x38mm x 1.48 mm and upto middle rail wall panels shall be covered by 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type )with aluminium clip height of middle rail shall be 1 meter from floor and remaining portion above middle rail shall be provided with 5 mm thick glass incl eaching approved designed with aluminium stiprs/beadings with rubber gasket as per existing or as provided compelte all as specified and directed ( Make of Aluminium section shall be JINDAL/INDULCO or equivalent as approved by GE) |
| 68 | M & L powder coated aluminumwindow/ doors grills fixingalong with frame of following specification, grills with opening 69.4mmX 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqmshape as ordered with frame channel of34 X 11mm X1.7mm thick fixed with screw inside of the window all as directed by Engr-in-Charge and all as specified and as directed. |
| 69 | S&F in repairVenetian blind coloured strip 75 mm top 5 mm thick powder coatedaluminium rod rod ends at brackets are moulded type etc complete all as directed. |
| 70 | S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as spd and as directed |
| 71 | M & L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as spd and as directed |
| 72 | S&F 12 mm thick toughned glass door withpowder coated aluminium frame including neccessary locking ,handle etc withdouble actionfloor spring in each shutter complete as requirement of site with suitable height and any type of eaching designed on tougned glass , off cuts completewith finishing wall in CM 1:4complete all as spd and as directed & design shall beapproved by Engr-in Charge. |
| 73 | S&F 12 mm thick toughned glass partion wall / sliding with or without powder coated aluminium frame / CP rolling rodd with any type of eaching designed on tougned glass , off cuts complete as requirement of site with arrangement for suitable heightwith off cuts complete all as spd and as directed |
| 74 | M/L for repairing to existing aluminium doorsof any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed. |
| 75 | M&L for E-board/ PVCfalse ceiling consisting of powder coated GI wall angle, main T and cross Tof 25mmX 25 mm X 1.40 mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 4 mm thick E-Classic board in pannelof size 600X600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of Electric fitting carefully complete all as specified and directed. |
| 76 | S&F in repairPVC hollow interlocking wall paneling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm.The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement. |
| 77 | S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as spd and as directed |
| 78 | S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section complete all as spd and as directed |
| 79 | S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed. |
| 80 | S&F 100 mm size butt hinges medium weight stailess steel colled rolledcomplete all as specified and directed by Engineer-in-Charge. |
| 81 | S&F in repair 300mm, ordinary rat tail rod patttern springs includding roller and roller platewith fixed to wooden/pressed steel framechowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete all as spd and as directed |
| 82 | S&F 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed |
| 83 | S & F in repair 300 mm long brasssliding door bolts without locking arrangement with screwsin internal shutter of bldgs complete all as spd as directed |
| 84 | S&F in repair1000 litres, rotational moulded polyethylene in double layer water storage tank (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed |
| 85 | S&F 500 litres,rotational moulded polyethylene in double layer water storage tank (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed . |
| 86 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed |
| 87 | S&F15 mm dia steel water tubing galvanized medium grade concealed in all type wallwith all fittings, fixed to walls and ceiling or in floor complete all as specified and directed |
| 88 | S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wallwith all fittings,fixed to walls and ceiling or in floor complete all as specified and directed |
| 89 | S&F in repair20 mm dia stainless steel 1.0 mm thick fancy typedroppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed |
| 90 | S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mmbore HDPE waste down pipe including Stainless steelbrackets ,Makecera or equivalent complete all as spd and as directed |
| 91 | S&F in repairvitreous Chinacorner wash hand basin, size 250 mm x187mm or suitable size & any design approved by GEincluding 15mm dia fancy CP pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mmbore HDPE waste down pipe including Stainless steelbrackets all s directed. Model : Cat No10035 of Hindware , Parryware Cat No C 0408 , Cera Cat No S 2020139as approved by GE. |
| 92 | S&F in repairs vitreous chinaware coloured wash hand basin with pedestalofsize 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed by Eng in charge.Model : WHB - Cat No 10072, Pedestal- Cat No. Ped 11029 Neptune of Hindware ,Parryware Cat No C0480 (SP) 181/CTH ,C 0375 pedestral, Cera Cat No Cat No 2090107Ped , Cat No S 2040112 WHB ".as approved by GE.. |
| 93 | S&F inrepair Vitreous China counter top oval type colouredwash basin suitable size including swan neck pillar taps with bottle trap ,but including waste pipe fixing on counter with stainless steel brackets complete all as specified. Make hindware of Ripple star white cat No 91080, Parryware Cat No C0483, CeraCat No FLS-WHT-0575 as approved by GE |
| 94 | S&F in repairs brass chromium platedwall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed. Model : Cat No FUS-29281 Fusion of Jaquar ,model of Hindware Cat No F390022, Parryware Cat No G0217A1 as approved by GE. |
| 95 | S&F Brass chromium platedwall mixer 2 in 1,15 mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed.Model : Cat No FUS - 29273 UPR of Jaquar , Hindware Cat No F390020 , Cera or Parryware Cat No G0216A1,as approved by GE. |
| 96 | S&F fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink & WHB fixing and connection to pipes complete all as directed.Model :ARI 39001B Aria of Jaquar ,Hindware Model No F280010 SCP, CeraModel No F2013451 as approved by GE. |
| 97 | S & F in repair fancy type 150mm size square brass CP shower rose all as specified.Model No F 7010305 of Cera, Hindware Model No F160006 , Parryware Model No T9985 as approved by GE. |
| 98 | S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turncomplete all as specified as directed. Model : FUS 29037 Fusion of Jaquar, Parryware model No G2304A1, Cera model No F101151 as approved by GE. |
| 99 | S & F in repair Brass CP Hand Showerwith 15mm Dia 1.2 Meter long flexible tube and wall hookscrewecd for iron pipe fancy type long body complete all as specified and directed. Model No :- HSH-1931 of Jaquar , Hindware Model No F160053, Parryware Model No T9982A1 as approved by GE. |
| 100 | S&Fin repair fancy type chromium plated brass two way bib cocksuitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange. Model: FUS 29041 Fusion of Jaquar ,Parryware model No G2381A1, Cera model No F1014161 " as approved by GE. |
| 101 | S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified.Make hindware or equivalent |
| 102 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 103 | S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified.Make Jaguar or equivalent as approved by GE. |
| 104 | S&F in repair fancy type stainless steeltowel racksize 600mm long including a pair of brass bracket complete all as specified and directed. Model No :-ACN -1181N of Jaquar ,Parryware Model No T6008A1, Cera Model No F5003102 as approved by GE. |
| 105 | S&F in repair stainless steel of AE - SI 316 grade tubulartowel ringincluding apair ofCP brass bracket complete all as specified.ModelNo ACN 1121N Jaquar, Parryware Model No T/6002A1, Cera Model No F5002105 as approved by GE. |
| 106 | S & Fin repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.Model: ACN - 1171N ofJaquar or equivalent in Parryware model No T6009A1 as approved by GE. |
| 107 | S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified .Make: Prayag/ Cera or Equivalent as approved by GE. |
| 108 | S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd as directed |
| 109 | S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as spd as directed |
| 110 | S & F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings,Size: 360x675x750 mm, S Trap-300 mmmake Jaguaror equivalentincluding making good to floor complete all as specified and directed. |
| 111 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.Model : ARI -39053 of Jaquar,Hindware Model No F320006, Parryware Model No G4907A1 as approved by GE. |
| 112 | S&F in repair vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with "P"or "S" trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. Make Hindware / parryware or equivalent as approved by GE. |
| 113 | S&F in repair vitreous China coloured European type WC with "P" or "S" trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. Model :- CNS-WHT-WH-10(seat), CNS-WHT-WCN1 (seat cover) Jaquar , Parryware Model C 0297(seat) & E-8071 (seat cover), Cera Model NO S1050101(seat) & B-1510119( seat cover) as approved by GE. |
| 114 | S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .Model:Sleek fresh dual flush of Hindware Model No Pastel size 47.6x15.5x32, Parryware Cat No 8177*, CeraCat No B1810110 snow white"as approved by GE. |
| 115 | S & F Brass CP health faucetwith 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hookscrewecd for iron pipe fancy type long body all as specified and directed. Model :ALD 573 of Jaquar ,Hindware Model No F160002, Parryware Model No T9961A1" as approved by GE. |
| 116 | S&F in repairs, vitreous China bowl urinal flat backsize430x370x340 with grating and union for discharge pipe excluding flushing cistern flush pipe and waste pipe complete all as specified anddirected. |
| 117 | S&F in repairs, wall mountedurinalsize370x315x620 with all fixing Accessories complete all as specified anddirected.model :- URS WHT 132530 of jaguar and hindware/ cera or equivalent as approved by GE. |
| 118 | S&F in repairPVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, typeB-1 complete all as specified and directed. |
| 119 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fitting complete all as specified and directed by Engr-in-charge. |
| 120 | S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fittingcomplete all as specified and directed. |
| 121 | S&F PVC (SWR) 110mm bore bends anyradiuscomplete all as specified and directed. |
| 122 | S&F PVC (SWR) 75mm bore bends any radiuscomplete all as specified and directed. |
| 123 | S&F PVC (SWR) 75 mm bore junction single (Single "T") equal or unequal with access doorcomplete all as specified and directed. |
| 124 | S&F PVC (SWR) 110 mm bore junction single (Single "T") equal or unequal with access doorcomplete all as specified and directed. |
| 125 | S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less,firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 126 | S&F in repair designed looking mirror size exc 0.54 sqm to 0.75 sqm of selected quality glass, mounted on 6mm thick fixed to wall with wooden plugs with chromium plated brass screws and cup washers, complete all as specified |
| 127 | S & F in repairPTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed.(Cat Part No. 551 of Make Prayag or equivalent model as approved by GE. |
| 128 | S & F in repair 0.8 mm thick stainless steel kitchen sink size 590x460x230mmundermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed .Model : Cera Cat No B 4711501- satin finish series alma , Parryware Cat No C852399, Kaff Cat No KS610SB (R10) Marco series as approved by GE. |
| 129 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 as approved by GE. |
| 130 | S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 131 | S&F 0.80 mm plaingalvanised Mild steel sheetingin ridge, hips, valley gutter,drip and straight flashingclass8 with zink coating @ 120 gms /sqm fixed with L- type or J- type or cranked hooks boltscomplete all as specified and directed. |
| 132 | M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges ofsunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed. |
| 133 | S&F for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, STUCCO Embossed finish withfixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart incl dismantled alsoall as spd as directed |
| 134 | S&F Framed work as in doors , gates & Stairs of angle or other section with gusset plates, rails, braces, etc., complete,drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixingFE 290 Gde E-165 complete all as spd as directed |
| 135 | S & F 1.25 mm thick Mild steel, plain black sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete including cutting out of existing sheet if required all as spd as directed |
| 136 | M& L for preparation of newly plastered wall surfaces and appltying three coats of texture (Domasc/Rustic) finished painting with the following process the surfaces should be completely dry and free from loose particles including preparing the surface with emry paper 180 nos and wipring clean and applying one coat of primer and allow drying for 6 to 8 hours then smoothen the surface by filling dints with thin coat of acrylie wall putty after drying for 4 to 6 hours and preparing the surface with emry paper and clean and applying another coat of primer and allow drying for 6 to 8 hours and then emulsion 1 Ltr with 500 ml water and applying with brush follwed by rolling with sponge roller or filter roller, applying three coat with brush and roller with and interval of 3 to 4 hours between successive coat all as per manufactures instruction complete all as specified and directed |
| 137 | M& L for preparation of newly plasted wall surfaces and applying three coats of texture (Super fine) finished painting with the following process the surfaces should be completely dry and free from loose particles including preparing the surface with emry paper 180 nos and wipring clean and applying one coat of primer and allow drying for 6 to 8 hours then smoothen the surface by filling dints with thin coat of acrylie wall putty after drying for 4 to 6 hours and preparing the surface with emry paper and clean and applying another coat of primer and allow drying for 6 to 8 hours and then emulsion 1 Ltr with 500 ml water and applying with brush follwed by rolling with sponge roller or filter roller, applying three coat with brush and roller with and interval of 3 to 4 hours between successive coat all as per manufactures instruction complete all as specified and directed |
| 138 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coatof red oxide zinc chrome primer complete all as specified anddirected by Engineer-in-Charge. |
| 139 | M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coatof pink primer complete all as specified and directed by Engineer-in-Charge. |
| 140 | M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats ofoil bound distemper over 1mm thick cement based in double layer wall care puttycomplete all as specified and directed. |
| 141 | M&L for preparing newly plastered walls surfaces and applying two coats ofoil bound distemper over1mm thickwall care puttycomplete all as specified and directed. |
| 142 | M&L for complete removal of existing treatment on ceiling,etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats ofoil bound distemper over and including one coat of 1mm thick double coatwall care puttycomplete all as specified and directed. |
| 143 | M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coatoverone coat primercomplete all as specified and directed. |
| 144 | M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 145 | M&L for complete removal of existing treatment on ceiling,etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats ofwhite wash complete all as specified and directed. |
| 146 | M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed. |
| 147 | M & L for Post Construction anti termiteTreatmentAt points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same as specified and directed. |
| 148 | M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor soilcomplete as specified and directed. |
| 149 | S & F for 6 mm thick Fiber cement, (corrugated or semi corrugated) sheets in roofs, walls, fixed with L-type or J-type hook or cranked bolts completeall as specified and directed. |
| 150 | S&F for 6mm thick Fiber cement two piece adjustableserretedridge for corrugated , semi-corrugated etc sheetsfixed with L-type or J-type hook or cranked bolts complete all as specified and directed(.Note :- Tenderer may note that amount of credit Rs 18995.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
