Public Works Department-PWD has published Proposed Construction Of Residential Building Of Belonia Jogomaya Kali Bari, C / O Paritosh Bhattacharjee, ( Secretary Of Jogomaya Kalibari Committee ) At Belonia, South Tripura With Provision Of First Floor, During The Year 2021-22. Earthwork, Cc . Submission Date for this Tender is 17-08-2021. Building Work Tenders in Belonia Municipal Council area Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SUB-HEAD: EARTH WORK |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. A. All kinds of soil |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. a) All kinds of soil |
| 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 5 | SUB-HEAD: CEMENT CONCRETE WORK |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. -All work upto plinth level: i) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 7 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 8 | SUB HEAD: R.C.C WORK |
| 9 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement. A. All work upto plinth level: i. 1 : 1.5 : 3 ( 1 cement : 1.5 fine sand : 3 graded stone aggregate20 mm nominal size) |
| 10 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a. Thermo-Mechanically Treated bars of grade Fe-500 D or more |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. i. 1 : 1.5 : 3 ( 1 cement : 1.5 fine sand : 3 graded stone aggregate20 mm nominal size) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement. |
| 13 | i. 1 : 1.5 : 3 ( 1 cement : 1.5 fine sand : 3 graded stone aggregate20 mm nominal size) |
| 14 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a. Thermo-Mechanically Treated bars of grade Fe-500 D or more |
| 15 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 16 | i. Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 17 | ii. Suspended floors, roofs, landings, balconies and access platform withtimber planks |
| 18 | iii. Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 19 | iv. Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 20 | v. Stairs (excluding Landings) exceptspiral-stair cases with wooden plank |
| 21 | vi. Edges of slabs and breaks in floors and walls above 20 cm wide. |
| 22 | SUB HEAD: BRICK WORK |
| 23 | First class brick work in foundation and plinth including cost of all materials as required complete:- a. In Cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 24 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- a. In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 25 | SUB HEAD: WOOD WORK |
| 26 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : a. Karai wood |
| 27 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters. i. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 28 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge. a. Gamair Wood i. 30 mm thick shutters |
| 29 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. ii. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 30 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone agg. 20mm nominal size) |
| 31 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 32 | i. 250 x 10 mm |
| 33 | ii. 200 x 10 mm |
| 34 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: i. 125 mm |
| 35 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : i. 300 x 16 mm |
| 36 | SUB HEAD: STEEL WORK |
| 37 | Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete. |
| 38 | Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design. |
| 39 | SUB HEAD: ALUMINIUM WORK |
| 40 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) |
| 41 | For fixed portion of approved quality:- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 42 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- i. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 43 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :- i. With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 44 | SUB HEAD: FLOORING & SKIRTING WORK |
| 45 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. A. Double charged Stainfree vitrified tiles i. Size of tile 60x60 cm |
| 46 | Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 47 | Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-in-Charge. |
| 48 | SUB HEAD: ROOFING WORK |
| 49 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. i. 0.63mm thick with zinc coating not less than 275gm/m2 |
| 50 | SUB HEAD: FINISHING WORK |
| 51 | 12 mm cement plaster of mix I.Cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 52 | 15 mm cement plasteron the rough side of single or half brick wall of mix:. i.Cement mortar 1:4 ( 1 cement : 4 fine sand) |
| 53 | 6 mm cement plaster of mix. I.Cement mortar 1:3 ( 1 cement : 3 fine sand ) |
| 54 | Neat cement punning. |
| 55 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 56 | i) With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 57 | ii) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 58 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: i. Two or more coats on new work |
| 59 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 60 | i. New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 61 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 62 | i. New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
