Public Works Department-PWD has published Establishment Of A Seismic Isolated Training Research And Quality Control Institute Under Pwd At Itanagar Near T.T. Plant, Nyokum Lapang Package I Building Civil Portion, Services And Fumitue.. Submission Date for this Tender is 04-08-2021. Building Work Tenders in Itanagar Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete 1 : 3 : 6 or richer mix including disposal off material within 50 metres lead. |
| 2 | Demolishing cement concrete 1 : 4 : 8 or leaner mix including disposal of material within 50 m lead. |
| 3 | Demolishing RCC work including stacking of steel bars and disposal of unserviceable materials within 50 metres lead. |
| 4 | Demolishing brick work in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 5 | Removing mortar from and cleaning bricks (Stacks of clean bricks shall be measured). c) From brick work in cement mortar |
| 6 | Dismantling wood work of sectional area 40 Sq.cm. and above wrought, framed and fixed in frames, other frames and trusses including stacking the material within 50 m lead. |
| 7 | Dismantling of doors, windows and clerestory windows(steel or wood)shutters includingchowkhats,architrave,holdfastsetccompleteandstckingwithin50 m lead. b) Of area beyond 3 Sq.m |
| 8 | Dismantling the tiles work in floors and roofs laid in cement including stacking of materials within 50 m lead. b) For thickness of tiles above 25 mm and up to 40 mm |
| 9 | Dismantling GI sheet roofing including ridges, hips, valleys and gutters etc and stacking the material within 50 m lead. |
| 10 | Excavation in Soil with Dozer with lead upto 100 metres (Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.) |
| 11 | Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m. |
| 12 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 13 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in: foundation and plinth |
| 14 | Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : b) Walls including attached buttresses, pilasters and their caps andbases and string courses etc. up to floor two level. |
| 15 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementinM25 |
| 16 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement in M25 |
| 17 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcemen in M25 |
| 18 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 19 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20. |
| 20 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M25. |
| 21 | Centring and shuttering including strutting, propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete. |
| 22 | Centring and shuttering including strutting, propping etc and removal of form work for : b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 23 | Centring and shuttering including strutting, propping etc and removal of form work for : e) Column, pillars, posts and struts etc. |
| 24 | Centring and shuttering including strutting, propping etc and removal of form work for : d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 25 | Centring and shuttering including strutting, propping etc and removal of form work for : c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 26 | Centring and shuttering including strutting, propping etc and removal of form work for : f) Stairs (excluding landings) except spiral stair cases. |
| 27 | Reinforcement Fe 500 of RCC work including bending, binding and placing in position complete. |
| 28 | Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand). |
| 29 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
| 30 | Extra for brick work in superstructure above floor two level, per floor per Cu.m. (1% of rate of brickwork above plinth up to floor two level Per floor per Cum. "1% SF |
| 31 | Extra for brick work in superstructure above floor two level, per floor per Cu.m. (1% of rate of brickwork above plinth up to floor two level Per floor per Cum. "1%TF |
| 32 | Extra for brick work in superstructure above floor two level, per floor per Cu.m. (1% of rate of brickwork above plinth up to floor two level Per floor per Cum. "1%MF |
| 33 | Extra for brick work in superstructure above floor two level, per floor per Cu.m. (1% of rate of brickwork above plinth up to floor two level Per floor per Cum. "1%TF |
| 34 | Half brick masonry (with best available local bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) in foundation and plinth. |
| 35 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 36 | Extra for half brick masonary in superstructure above floor two level. SF |
| 37 | Extra for half brick masonary in superstructure above floor two level.TF |
| 38 | Extra for half brick masonary in superstructure above floor two level.MF |
| 39 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 40 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. |
| 41 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 42 | Providing and fixing of factory made uPVC doors & windows make;Fenesta complete, in conformity with specification as per IS 875-Part III, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0 mm (+0.2 mm) duly reinforced with G.I section 1.6 mm (+0.2mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives with 6mm Toughened Glass with weather seal (EPDM/TPE). Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber.Casement Windows & Door |
| 43 | Providing and fixing of factory made uPVC doors & windows make;Fenesta complete, in conformity with specification as per IS 875-Part III, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0 mm (+0.2 mm) duly reinforced with G.I section 1.6 mm (+0.2mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives with 6mm Toughened Glass with weather seal (EPDM/TPE). Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber.(2T2P Sliding Window & Door) |
| 44 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. b) Plain grill. |
| 45 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. a) 300 x 16 mm |
| 46 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessaryscrews etc complete.a) 300 x 10 mm |
| 47 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessaryscrews etc completec) 150 x 10 mm |
| 48 | Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.a) 125 mm |
| 49 | Providing and fixing 12 mm thick and 150 mm wide pelmet of flat pressed 3 layer particle board (medium density) with 25 mm dia second class teak wood curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete. |
| 50 | Extra for using veneered particle board in item of pelmet 12 mm thick and 150 mm wide. a) Teak wood veneering each face |
| 51 | Providing and fixing 25 mm dia first class Indian teak wood curtain rods with brackets plugs etc wherever required. |
| 52 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 53 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 54 | 12 mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
| 55 | 15 mm cement plaster 1 : 3 (1 cement : 3 fine sand) on the rough side of single or half brick wall. |
| 56 | Extra for providing and mixing water proofing materials in proportion recommended by the manufacturers. |
| 57 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 58 | Applying priming coat consisting of a mixture of red lead, white lead and double boiled linseed oil in the ratio of0.7 Kg : 0.7 Kg : 1 Litre on wood work complete. |
| 59 | Applying priming coat of a mixture of red lead raw linseed oil and turpentine oil in the ratio of 2.80 Kg : 1 Litre : 1 Litre on steel work complete. |
| 60 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 61 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 62 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 63 | Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or aggrigate 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete. |
| 64 | Sintex Water tank at Terrace |
| 65 | Grading roof for water proofing treatment with: a) Lime concrete with 20 mm nominal size brick aggregate and 50% lime mortar 1 : 2 (1 lime putty : 2 surki). |
| 66 | Providing and laying plastic roofing compound standard black (using 2.75 Kg. per Sq.m.) over a surface painted with cold liquid plastic roofing compound at 0.24 Litre per Sq.m. including spreading coarse sand over the top surface at 6 Cu.dm. per Sq.m. etc. complete. |
| 67 | Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm MS laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of the top cover and spring. |
| 68 | Providing and fixing 27.5 cm long wire spring grade No.2 for rolling shutters. |
| 69 | Providing and fixing top cover for rolling shutters. |
| 70 | Providing and fixing ball bearing for rolling shutters. |
| 71 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. Total coated thickness 0.45mm Roofing Sheets Details of cost for 179.655 Sq.m. Laying and fixing 20 sheets in 3 row require Overall Sheet area of 20 x 3 x 3.05 x 1.072 plus 3% wastages = 202.061 Sqm After H & L laping as per manufacturer"s specification, effective Area Measurable will be 20 x 3x 2.95 x 1.015 = 179.655 Sqm |
| 72 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet ridges fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. Total coated thickness 0.45mm Roofing Sheets Details of cost for 11.75m Laying and fixing 4 lenths of 3.05m each require Overall length of 4 x 3.05 plus 3% wastages 12.566m After laping as per manufacturer"s specification, effective Measurable length will be (4 x 3.05) - (3 x 0.15) = 11.75m |
| 73 | Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : flooring base concrete |
| 74 | Providing reinforced cement concrete eaves board 25 mm thick and 15 cm to 30 cm wide inM20 mix (1 cement : 1.5 coarse sand : 3 stone aggregate 10 mm nominal size) up to floor two level including finishing and plastering with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm on exposed surfaces to give smooth and even surface, centring and shuttering but excluding cost of reinforcement. |
| 75 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminiumangle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid forseparately). |
| 76 | Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length) fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5 mm dia. 40mm long complete as per direction of Engineer -in-charge. |
| 77 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width |
| 78 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 8 mm thickness |
| 79 | Providing and fixing 12 mm thick insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately). |
| 80 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). |
| 81 | Supply and fabrication of steel work at Fabricators workshop comprising of Main Girders, Cross Girders, Connecting plates, stringer, stiffening plates etc. from steel plates and structural steel of specified grades as per approved drawing including straightening, descaling, degreasing, cutting to size and shape, drilling, welding and grinding, supply of all MS/HTS shop or site bolts, nuts & washers, holding down bolts and nuts etc., trial assembling at workshop, one priming coat of shop paint with red lead paint conforming to IS-102 with all labour, material, cost of paints, consumables, stacking in protected condition etc. complete as per specification and as directed by the Engineer-in-Charge (Carriage cost from fabricator work shop to actual bridge site will be paid seperately). |
| 82 | Taking delivery of fabricated steelwork from stacks at site as necessary, assembling and erection of fabricated steel structure to proper line , level and camber as per approved drawings complete in all respect including transportation and handling supply of all fasterners. Painting of all exposed surfaces of steelwork after erection with one coat of red lead confirming to IS-102 and two coats Alumunimium paint to IS-2339, grouting of anchor bolts in position, including all labour, consumables, materials, machinery, tools and tackles complete as per specification and as directed by the Engineer-in-Charge |
| 83 | Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by manufacturers. |
| 84 | Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in shelves including finishing and plastering with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm on exposed surfaces to give a smooth and even surface including shuttering etc but excluding cost of reinforcement withM20 (1 cement : 1.5 coarse sand : 3 stone aggregate 12.50 mm nominal size). |
| 85 | Providing precast cement concrete jaliM20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size) reinforced with 1.6 mm dia mild steel wire including, roughening, cleaning, fixing and finishing in cement mortar 1 : 3 (1 cement : 3 fine sand) etc complete upto floor two level excluding plastering of the jams, sills and soffits. a) 50 mm thick |
| 86 | Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20 mm x 5 mm size with top and bottom rails of T iron 40 mm x 40 mm x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. |
| 87 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 88 | Chequered terrazzo tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25 mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete: a) Light shades using white cement |
| 89 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete a) Size of Tile 500x500 mm |
| 90 | Providing and fixing plain Multipurpose 6mm thick Cement board ( High Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately). |
| 91 | Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand). a) 75 mm diameter pipe |
| 92 | Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1 : 2 : 4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc. Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1 : 2 : 4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc.a) 75 mm diameter |
| 93 | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand). (A) CI Plain bend a) 75 mm diameter |
| 94 | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand). (B) CI head flat or corner type bend : a) 75 mm diameter |
| 95 | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand). (C) CI Plain shoes : a) 75 mm diameter |
| 96 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 97 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design. |
| 98 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). b) 15 mm nominal bore |
| 99 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work). e) 40 mm nominal bore |
| 100 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not less than 93 gms |
| 101 | Providing and fixing brass full way valve with wheel of approved quality. b) 40 mm nominal bore |
| 102 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
| 103 | Providing and fixing PVC connection pipe with brass union. b) 15 mm nominal bore |
| 104 | Providing and fixing non-return valve of approved quality. b) 40 mm nominal bore |
| 105 | Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inlet. (a)150mm dia |
| 106 | Providing and fixing normal gauge HD polythene pipes of approved quality/complete with special flange compression type fittings (of approved make) including trenching and refilling etc (external work). e) 40 mm nominal bore |
| 107 | Providing and filling sand all round GI pipes in external work. e) 40 mm nominal bore |
| 108 | Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.a) WC pan with white plastic seat and lid. |
| 109 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required.a) One urinal basin with 5 Litres CI automatic flushing cistern |
| 110 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.b) Flat back wash basin size 550x400 mm with single 15 mm CP brass pillar taps of heavy quality. |
| 111 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. |
| 112 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). a) 750 x 20 mm size |
| 113 | Providing and fixing toilet paper holder. a) CP Brass |
| 114 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. a) 100 mm dia |
| 115 | Providing and fixing sand cast iron heel rest sanitary bend. a) 100 mm dia |
| 116 | Providing and fixing sand cast iron single equal plain junction of required degree. a) 100 x 100 x 100 mm |
| 117 | Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors. a) 100 mm inlet and 100 mm outlet |
| 118 | Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.With granite stone of area less than 0.50 sqm. |
| 119 | Extra for Molding |
| 120 | SH:- Electrical Work: - ( Services ) Wiring for light point/fan point /exhaust fan point/call bell point with 1.5 sqmmpvc insulated copper conductor cable with pvc conduit as and where required with modular type switches ,ms box,phenolic laminate cover and earthing (a) Group"B" |
| 121 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmmpvc insulated copper conductor cable with pvc conduit as and where required with modular type switches ,ms box,phenolic laminate cover and earthing (b) Group "C" |
| 122 | Wiring for twin control light with 1.5 sqmmpvc insulated copper conductor cable with pvc conduit as and where required with modular type switches ,ms box,phenolic laminate cover and earthing(Group C) |
| 123 | Wiring for light / power plug with 2x4 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No 4 mm² FR PVC insulated copper conductor single core cable for loop earthing as required |
| 124 | Wiring for circuit /sub-main wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required with 2x2.5+1x2.5 sq mm |
| 125 | Wiring for circuit /sub-main wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required with 4x16+1x16 sq mm |
| 126 | PVC CONDUIT ,METALBOXES , SWITCHES & ACCESSORIES Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required (20 mm) |
| 127 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required (25 mm) |
| 128 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required (4" box) |
| 129 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required (6" box) |
| 130 | Supplying and fixing following modular type switch/socket on the existing switch box cover(6A switch) |
| 131 | Supplying and fixing following modular type switch/socket on the existing switch box cover (6A socket) |
| 132 | Supplying and fixing following modular type switch/socket on the existing switch box cover (Telephone socket) |
| 133 | Supply and fixing of TV antenna socket outlet |
| 134 | Providing and fixing of 1200 mm Sweep Cilling Fan |
| 135 | Installation of exhaust fan upto 300 mm sweepin the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc.as required |
| 136 | Supplying of 36 watt Decorativetubefitting with all accessories as required |
| 137 | Supplying of 2" - 18 watt 300 x300 mm fittings for cfl complete as required ( Philips LHCC25268325 ) |
| 138 | Supplying and fixing of Ding Dong call bell and bell push suitable for 230 V AC supply with all accessories etc. as required. |
| 139 | Supplying & fixing of36 watt flourescent tube. |
| 140 | Supplying & fixing of 16 watt CFL |
| 141 | Supplying & fixing of 18 watt CFL |
| 142 | Providing & Fixing 15/16 amp.switch |
| 143 | Providing & Fixing 15/16 amp. socket outlet . |
| 144 | SH:- Fire Fighting Works:-"Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.(a)"Two Loop Panel. |
| 145 | Supplying,installation,testing&commissioningofcentral graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required. |
| 146 | Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. |
| 147 | Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. |
| 148 | Supplying, installation, testing & commissioning of fault isolator complete with base as required. |
| 149 | Supplying, installation, testing & commissioning of addressable manual call point complete as required. |
| 150 | Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. |
| 151 | Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required |
| 152 | Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. |
| 153 | SH:- EARTHING :- Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (with charcoal/ coke and salt ) as required. |
| 154 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 155 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required . |
| 156 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing alongwith existing surface / recessed conduit / submain wiring / cable as required . |
| 157 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required. |
| 158 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. |
| 159 | Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 160 | Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 161 | Supplying & fixing of lightning conductor on the roof of the building |
| 162 | Sh:-External Electrical, Control Panel and Sub-Mains :- Fabrication and Supplying of Double Door, Cubical type, weather proof,self supported feeder panel of size 1.50m x 1.30m x 0.50m made out of 14 SWG MS sheet and MS angel of size 50x50x6mm horizontal and inter- mediate support for mounting the following accessories and providing arrangement for C.C. embeding i/c provision of making a stand, the top portion of the feeder pillar should be made sloping type so as to drain away the rain water. The feeder pillar should be provided hinges for locking arrangement for both sides. Cutting, welding, drilling of holes painted with one coat of red oxide primer and two coats of smoke grey paint i/c providing and fixing of the following accessories and inter connections complete etc as required. [(320 AMCCB= 1 Nos), (100 AMCCB = 4 Nos), (63 A MCCB = 1 No), (Aluminium bus bar chamber = 1 Set-400 A,6Way ), (LT, 3-ø Tri- vector Electronic Meter= 1 No) , (Pilot Lamp Fitting with lamp= 3 Nos) , (320 A MCCB enclosure=1 set) & Changeoverswitch] |
| 163 | Supplying8 way Distribution Board . |
| 164 | Supplying10A SP MCB |
| 165 | Supplying 25 A SP MCB |
| 166 | Supplying 40 A TPN RCCB |
| 167 | Supplying and laying of3½ core x 185 sqmm UG cable |
| 168 | Supplying and laying og 2 core 2.5 sq mm cable |
| 169 | Supplying and fixing of 50 mm dia GI pipe for cable laying |
| 170 | Installation and commisioning of8 wayDB |
| 171 | Fixing 10A SP MCB |
| 172 | Fixing 25 A SP MCB |
| 173 | Fixing 40 A TPN RCCB |
| 174 | Supply, Instalation , Commissining& Testing of1 nos 100 kVA Silent Type D.G. Set .( Kirloskar / Mahindra) |
| 175 | Supply, Installation , Commissining& Testing of 1 no 250 kVA ( 11 / .433 KV ) Transformer |
| 176 | Providing and fixing 3 metre long pole for post top lights |
| 177 | Providing and fixing bollard on topofpole |
| 178 | Sh:-Service connection:- (a) Load security |
| 179 | 3 phase meter |
| 180 | Inspection charges |
| 181 | Service connection charges |
| 182 | Furniture and Furnishing: Table |
| 183 | Main Chairs |
| 184 | Visiting Chairs |
| 185 | Discussion Table |
| 186 | Work station chairs Chairs |
| 187 | Room Table |
| 188 | Chairs |
| 189 | Bed (Medium size) |
| 190 | Shelve(Godrej) |
| 191 | Dininning Table |
| 192 | Cosmo Sofa- Two Seater |
| 193 | Cosmo Sofa- Three Seater |
| 194 | Fixed Chairs |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
