|
| 1 | Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, de-watering and/or removal of slush and incidentals, lift upto any heights, stacking the excavated soil not more than 3 mtrs (Three meters) clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimeter)layers, whenrequired into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 2 | Excavation in drains and channels etc; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 3 | Sand filling under floor including watering, ramming, consolidating and dressing complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 4 | Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 5 | Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors roofs, landings windows sills, cornices, arches, moulding, corbelling including curved surfaces where ever required as per Architectural drawing and the like floor etc. within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 6 | Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls (any thickness) partitions and the like including attached pilasters buttress, plinth and string courses and the like within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 7 | Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etc; within all leads, lifts of materials and other incidentals. |
| 8 | Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 9 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick,welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 10 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in work in edge of slab and breaks in floors and walls under any thickness within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 11 | Providing and laying cement concrete1:6:12 (One cement; Six sand; Twelve graded broken/crushed stone aggregate 40mm (Forty milimetres) nominal size) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts of materials and other incidentals |
| 12 | Providing and laying cement concrete 1:4:8 (One cement; four sand; eightgraded broken/crushed stone aggregate 40mm (Forty milimetres) nominal size) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 13 | Squared rubble masonry coursed with hard stone of lapproved quality in foundation andplinth including rakcking out joints with cement mortar 1:6 (One cement : Six sand) and curing complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 14 | Random Rubble masonry/Polygonal Rubble masonry un-coursed/ brought to courses with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12(One cement: Six sand: Twelve graded crushed/broken stone aggregate 20mm(Twenty milimetres) nominal size) at plinth level with cement mortar 1:6 (One cement: 6 sand) and curing complete, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 15 | Providing and laying cement concrete work 1:2:4 (One Cement : Two Sand : Four graded stone aggregate 20 mm (Twenty millimetres) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concreteetc; including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 16 | Providing and laying cement concrete work 1:2:4 (One Cement : Two Sand : Fopur graded stone aggregate 20 mm (Twenty millimetres) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls any thickness including attached buttresses, pilaster and their caps and bases and string courses etc; including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 17 | Providing and laying cement concrete work 1:2:4 (One Cement : Two Sand : Fopur graded stone aggregate 20 mm (Twenty millimetres) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Columns, pillars posts and struts for all floors heights, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 18 | Providing and laying cement concrete work 1:2:4 (One Cement : Two Sand : Fopur graded stone aggregate 20 mm (Twenty millimetres) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 19 | Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete including cost of binding wires complete and other incidentals due for its completion for all floors, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 20 | Providing and laying 20cm (Twenty centimetres) thick precast cement concrete hollow block masonry with cement concrete blocks of size 40cmx19cmx20cm (Forty centimeters into nineteen centimeters into twenty centimeteres) thick including quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (Onecement : Three sand : Six graded stone aggregate 20mm (Twenty millimetres) nominal size laid with cement mortar 1:6 (One cement : Six sand) including curing complete in super structure upto allfloor level, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 21 | Providing and layingprecast concrete block masonry in partition walls 10 cm (Ten centimetres) thick with solid block of approved size including quion blocks, jamb blocks, closer etc. made of cement concrete 1:3:6 (One cement : Three sand : Six graded stone aggregate 40mm (Forty millimetres) and down gauge in cement mortar 1:3 (One cement : Three sand), including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 22 | Providing second class half brick masonry in common burnt clay building bricks in cement mortar 1:3 (One cement : Three sand) , including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 23 | Providing and fixing M.S. channels in doors and windows frames manufactured from M.S. channels section 75x40x4mm (Seventy five into Forty into Four milimetres) M.S. flat 75x4mm (Seventy five into Four milimetres)combination as per design drawing including hinges, jambs, beeds if required threshold of M.S. angles 50x25mm (Fifty into Twenty five milimetres) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butts hinges 2.5mm (Two decimal Five milimetres)thick with a provision of locking arrangements shock observes and specified and applying coat of approved steel primer after pre-treatment of surfaces within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 24 | Providing and fixing angle iron doors frames (Single rebate) manufactured from M.S. angle section of 45x45x5mm(Forty into Forty five into forty five into Five milimetres) and M.S. flat 50x5 (Fifty into five milimetres)as per design and drawing including jambs, lock jambs beeds if required angles threshold of M.S.angle 50x5mm (Fifty into five milimetres) welded or rigidly fixed by mechanical means lugs with split ends tails to each jambs including steel butt hinges 2.5 (Two decimal five milimetres) thick with a provision of locking arrangements and shock absorbers as specified and applying coat of approved steel primer after pre-treatment of the surfaces including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 25 | Providing and fixing angle iron doors frames (Double rebate) manufactured from M.S. angle section of 45x45x5mm(Forty into Forty five into forty five into Five milimetres) and M.S. flat 25x5 (Twenty five into five milimetres)as per design and drawing including jambs, lock jambs beeds if required angles threshold of M.S.angle 50x5mm (Fifty into five milimetres) welded or rigidly fixed by mechanical means lugs with split ends tails to each jambs including steel butt hinges 2.5 (Two decimal five milimetres) thick with a provision of locking arrangements and shock absorbers as specified and applying coat of approved steel primer after pre-treatment of the surfaces including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 26 | Providing and fixing 12mm(Twelve milimetres) thick preliminated board both side BWP Phenol bounded exterior/interior grade shutters with 40mm(Forty milimetres) thick frame of first class deodar wood for doors including bright finished/black enameled iron butt hinges with necessary screws within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 27 | Providing and fixing 40mm (Forty milimetres) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85 G with wire of 0.56mm (Zero decimal five six milimetres) diameters for doors, windows and clerestory windows including bright finished /black enameled iron hinges with screws within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 28 | Providing and fixing 12mm (Twelve milimetres) thick 100mm (One hundred milimetres) wide pelmet with 25mm (Twenty five milimetres) wooden curtain rod and brackets including fixing with 25x3mm (Twenty five into Three milimetres) M.S. flat 10 cm (Ten centimetres) long and plug etcetra; complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 29 | Providing and fixing 19mm (Nineteen milimetres) thick water proof commercial board in shelves/box for cup-board butt joints and fixing with nails and screws etc; complete and all cut portions of the board shall have 6mm (Six millimetres) thick hard wood edging within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 30 | Providing and fixing 19mm (Nineteen milimetres) thick commercial board water proof shutters for up boards including fixing with nickel plated piano hinges with screws etc complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 31 | Providing and fixing 250x16mm (Two hundred fifty into Sixteen milimetres) size anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 32 | Providing and fixing 250x10mm (Two hundred fifty into Ten milimetres) size aluminium Tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with necessary screws etc. within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 33 | Providing and fixing 150x10mm (One hundred fifty into Ten milimetres) size oxidized M.S tower bolts (barrel type) with necessary screws etc. complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 34 | Providing and fixing 125mm (One hundred twenty five milimetres) size aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 35 | Providing and fixing 100mm (One hundred milimeters) size M.S. handle with necessary screws complete , within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 36 | Providing and fixing 150mm (One hundred fifty millimeter) oxidized M.S. single acting spring hinges with necessary screw etc; complete including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 37 | Providing and fixing M.S.200mm (Two hundred milimetres) size M.S. hocks and eyes complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 38 | Providing and fixing 6mm (Six milimetres) thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 39 | Providing and fixing 65x35mm (Sixty five into Thirty five milimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra complete (Indian make of approved quality) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 40 | Providing and fixing M.S. Grills of requirerd pattern in frames of windows and ventilators etcetra; with M.S. flat 20x5mm (Twenty into Five milimetres) and 8x8mm (Eight into Eight milimetres) solid, square or round bars with round headed bolts and nuts etcetra; or by screws,within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 41 | Providing and fixing 100mm (One hundred millimetres) dia pipes on wall face P.V.C. (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm (Four point five kilograms per sqaure metres) including filling the joints with approved adhesive complete, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 42 | Providing and fixing 100mm (One hundred millmetres) dia PVC shoe on wall faces P.V.C. (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 43 | Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections ,joints mitered and welded with 16x3.15 mm (Sixteen into three point fifteen millimeters) lugs 10cm (Ten centimeters) long embedded in cement concrete blocks 15cmx10cmx10cm (Fifteen into ten into Ten centimeters) size of 1:3:6 (One cement : Three sand : Six graded stone aggregate 20mm (Twenty millimeters) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint fixed steel windows within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 44 | Fixed steel windows |
| 45 | Side hung windows |
| 46 | Top hung ventilators |
| 47 | Providing and fixing 10mm (Ten milimetrees)thick antiskid water proof stain resistant and impect resistent heavy duty vetrified tiles Nitco/somany 600x600x10mm (Six hundred into Six hundred into Ten milimetres) sizemanufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement isto Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required completewithin all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 48 | Providing and laying spartic ceramic tiles antiskid of Orient/Bell/Somany/RAK first quiality approved shade 5.5 mm (Five decimal five milimetre) thick in flooring 300x300mm (Three hundred into Three hundred milimetre) size intreads of steps laid on a bed of 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) finished with flush pointing in white cement upto all floor level,within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 49 | White glazed tiles 6mm (Six milimetres) thick in skirting of 30x20cm (Thirty into Twenty centimetres) of Naveen/Somany tiles or its equivalent in risers of steps and dado 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 50 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter enamel paint other than white within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 51 | Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces of all dirt, dust and other foreign matter and sand papering and knotting with ready mixed paint brushing wood pink primer including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 52 | Painting two coats(excluding coat) on new wood and wood based surface with enamel paint other than white paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand paperingandstoping within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 53 | 6mm (Six millimetres) thickness cement plaster to ceiling in cement mortar 1:3 (One cement : Three Sand) including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 54 | 15mm(Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/ stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 55 | 15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 56 | Applying Birla / J.Kwhite wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface completeas perdirection of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government. |
| 57 | Applying two coat of Acrylic Washable emulsion Asian / Dulux /Nerolac paints or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand papered smooth completewithin all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 58 | Finishing wall with Apex weather proof exterior grade emulsion of Asians Paints / Exterior Emulsion of Nerolac Suraksha paint as per approved shade approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth completeas perdirection of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government. |
| 59 | Providing and fixing M S fan clamps of standard shape and size including cutting and making good including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 60 | Providing under layer for plinth protection of 75mm (Seventy five milimetres) thick (un-consolidated) bed of dry brick/stone aggregate 40mm (Forty milimetres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of groundincluding entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 61 | Providing plinth protection 50mm (Fifty milimetres) thick cement concrete 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) including finishing the top surfaces of concrete smooth including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 62 | Construction course rubble hammer dressed ‘U’ shape open surfaces drain with side wall 15x23cms (Fifteen into twenty three centimeters) in cement mortar 1:6 (one cement :six sand) and inside plastering with cement plaster 1:3(one cement :three sand) including earth work and laying 10cm (Ten centimeters) cement concrete in 1:5:10(One cement: five sand: ten graded) crushed stone aggregate 40mm(Forty millimeters)nominal size and 7.5cm (Seven decimal five centimetres)cement concrete 1:2:4(One cement: two sand: four graded) crushed stone aggregate 20mm(Twenty millimeters)nominal size and finished with afloating cost of neat cement complete as per standard designwithin all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 63 | Providing and fixing anodised aluminium work for door, window, ventilators and partitions aluminium frame extrusion sections (No 14081)127X44.45X3.00mm (one hundred twenty seven into forty four deciman four five into three millimetre) of Jindal / Hindalco aluminium extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading forglazinge/ panelling C.P. brass/stainless steel screws. All complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 64 | Providing and fixing coloured anodised aluminium for door, window, ventilators and partitions with extruded built up standard tubular and other sections as required of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips,or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle,aluminium, snap beading for glazinge/panelling C.P.brass/ stainless steel screws. All completeas per architectural drawings and the directions of Engineer-In-Charge. For shutters of doors window and ventilator including providing and fixing hinges / pivots and making provisions for fixing of fittings wherever required including cost of PVC / neoprene gaskets as required of Jindal / Hindalco including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 65 | Providing and fixing Aluminum oxidized Hydraulical door closer Complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge |
| 66 | Providing and fixing 15mm ACP Sheet Aluminum door Complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge |
