Public Works Department-PWD has published Construction Of Warehouse For Storage Of Electronic Voting Machines ( Evms ) And Vvpats At Dari Dharamshala, Distt. Kangra, Hp ( Sh- Providing E.I. Therein ) Construction Of Warehouse For Storage Of Electronic Voting Machines ( Evms ) And Vvpats A. Submission Date for this Tender is 29-07-2021. Building Work Tenders in Dari at Dharamshala in Distt. Kangra Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. |
2 | Make:- (KEI, Anchor , L&T for wire ( Legrand(Myrius), L&T (Oris), Anchor(Romaplus) for accessories) |
3 | Group C. |
4 | Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. |
5 | Make:- (KEI, Anchor , L&T for wire ( Legrand(Myrius), L&T (Oris), Anchor(Romaplus) for accessories) |
6 | Wiring for light plug with 2x2.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.2.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
7 | Make:- (KEI, Anchor , L&T for wire ( Legrand(Myrius), L&T (Oris), Anchor(Romaplus) for accessories) |
8 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
9 | 2x1.5 Sq. mm. |
10 | 2x10 Sq. mm. |
11 | 2x16 Sq. mm. |
12 | Make:- (KEI, Anchor , L&T) |
13 | Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
14 | 3x1.5 Sq. mm. |
15 | 6x1.5 Sq. mm. |
16 | Make:- (KEI, Anchor , L&T ) |
17 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- |
18 | 25 mm dia |
19 | Make- Diplast, BEC, AKG |
20 | Supplying and fixing Electric Switch board having 3 No. of 5 amp switches and socket on suitable size of G.I Modular box of 205 mmx135 mm x60mm deep size with modular plate and cover in recess including providing and fixing 3 No 5 pin 5/6 ampsmodular socket outlet and 5/6 amps, modular switch, connections etc. as required. |
21 | Makes:- Legrand, L&T, and Schneider |
22 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. |
23 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. |
24 | Makes:- Legrand, L&T, and Schneider |
25 | Supplying, Installation, Testing and Commissioning of indoor single door,Cubical type L.T. main panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 14G/16G CRCA sheet, baseframe75X40X3MM angle duly painted with Siemens GreyPowder Coated paint, Assembly Charges of 200A 4 strip Aluminium Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm=1.0 Amp.) Aluminium shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured codedRed, Yellow, Blue & Black. Approximate Size of PanelH- 1400 X W-1250 X D-450MM.Assembly Charges ofAluminium/Copper solid/ Copper flexible wire interconnection Busbar to ACB/ SWITCH & ACB/ SWITCHto field side for Cable terminationduly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mmfor ScadaWiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc.Conforming IS :8623 Par-I 1993 |
26 | MATERIAL: |
27 | MAIN INCOMER :-MCCB 200A, 4P 50 kA , Digital Metering , Amp. Meter 96x96 MM-1 No., Volt Meter 96x96 MM-1 No., Ampere Selector Switch-1 No. Voltmeter Selector Switch-1 No., Current transformer-3 No,Phase indicating Lamp-3 No, Control SP MCB -3No,Terminal switch -1No . Surge Protection Device -1 No |
28 | OUTGOING : |
29 | MCCB40/63 A 4P-36 KATMR with O/L & S/C protection -5 Nos., Spreader link 40/63A 4P 4Nos., RHOM Ext-1 No, MCBDP 63 A 10 KATMR with O/L & S/C Protection-1 No., Spreder link 63 A DP-2 Nos., RHOM Ext.-1No., |
30 | All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wirewith thimbles, printed sleeves, tie & belt etc; |
31 | The prices of complete job as per the specifications above shall be inclusive ofgasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc, |
32 | Makes For MCCB:-Schneider/L&T/ABB .Makes for Digital metering :AE/ ESSMA/ C&S,Make forSurge protection :ABB/L&T |
33 | Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T.lighting load Sub Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 14G/16G CRCA sheet, baseframe75X40X3MM angle duly painted with Siemens GreyPowder Coated paint, Assembly Charges of 100A TPN Aluminium Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm=1.0 Amp.) Aluminium shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured codedRed, Yellow, Blue & Black. Approximate Size of PanelH- 1100 X W-1550 X D-300MM.Assembly Charges ofAluminium/Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ SWITCH & MCCB/ SWITCHto field side for Cable terminationduly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mmfor ScadaWiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc.Conforming IS :8623 Par-I 1993 |
34 | MATERIAL: |
35 | MAIN INCOMER :- MCCB 40/63 A 4P 25 kA with O/L & S/C Protecrtion-1 No., Spreader Link 63 4P-2 Nos.,, |
36 | OUTGOING : |
37 | G.F MCCB 40 A DP 10 kA-3 Nos,and MCB (6- 32A) SP 10kA |
38 | All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wirewith thimbles, printed sleeves, tie & belt etc; |
39 | The prices of complete job as per the specifications above shall be inclusive ofgasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,For Light load Incomer63 A |
40 | Makes For MCCB:-Schneider/L&T/ABB/ . |
41 | Supplyinganderection of 6amps. to 32 amps. rating, 10 KA breaking capacity, 240volts, "C" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- |
42 | 6 amp Single pole. Cat-A. |
43 | 16 amp Single pole. Cat-A. |
44 | Makes:- Legrand, L&T, and Schneider |
45 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
46 | 40 Amps. Cat-A. |
47 | 63 Amps. Cat-A. |
48 | Makes:- Legrand, L&T, and Schneider |
49 | Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
50 | 40 Amps. Cat-A. |
51 | 63 Amps. Cat-A. |
52 | Makes:- Legrand, L&T, and Schneider |
53 | Supplyingand fixingoffollowingway, singlepoleandneutral sheetsteel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- |
54 | Double door-4 way |
55 | Double door-12 way |
56 | Double door-16 way |
57 | Makes:- Legrand, L&T, and Schneider |
58 | Earthing with copperearth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required. |
59 | Extra for using salt and coke for G.I. or copper plate earth electrode complete as required. |
60 | Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required. |
61 | Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required. |
62 | Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run) |
63 | Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run) |
64 | Providing and laying of one No. aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:- |
65 | Armoured cable 70 sq. mm (3.5 core) |
66 | Makes- Havells, KEI ,L&T |
67 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts gradeon surface etc. of the required size:- |
68 | Armoured cable 70 sq. mm (3.5 core) |
69 | Makes- Havells, KEI ,L&T |
70 | Providing and installation of Ceilingfan with step type fan regulator modular,air delivery 215m3/min power input 30watts speed 330 RPM includingf wiring the down rods of standard lenght(upto 30cm) with 16/0.20mm twin twisted felxible cotton braided copper cable including providing and fixing phenolic laminated sheet coveron the fan box and eartging required:- |
71 | Ceiling Fan 1200 mm sweep, Category-A |
72 | ( Usha-Technixplus BEE 3 Star rated model)makeUsha,Crompton,aaanchor )(Minimum BEE 3 star rating) |
73 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- |
74 | Exhaust Fan, Light duty, (Domestic) 300 mm sweep |
75 | Exhaust Fan, Heavy duty, 300 mm sweep |
76 | Makes:- Bajaj / Usha / Crompton |
77 | Providing and fixing following watt LED bulk head fitting die cast aluminium body with IP-65 protection of all sizes and shapes including making connections efficacy > 100 lumiens per watt,harmonics < 10,CRI >80 ,Power factor > 0.95, testing and commissioning etc. as required complete in all respects. as required with warranty of 5Year`s from the date of installation at site. |
78 | Bulk Head Fitting 10 Watt |
79 | (Make:- Wipro/Phillips/Jaquar/Panasonic ( Cat No. PBHM01107) |
80 | Providing and fixing, Surface mounted LED 15 watt down light luminaries with aluminum housing in white PC finish, specially designed heat sink, anti glare diffuser and integrated energy efficient electronic driver. it should be compatible with specifications i.e. power factor = 0.9, harmonic distortion = 10% and efficacy = 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz,complete with all accessories, connections, testing and commissioning etc. as required with warranty of 5Year`s from the date of installation at site. |
81 | LED surface mounted square LED downlight (15 watt) |
82 | (Make:- Wipro/Phillips/Jaquar/Panasonic( Cat No PDLM11154) |
83 | LED surface mounted square LED downlight (20 watt) |
84 | (Make:- Wipro/Phillips/Jaquar/Panasonic( Cat No PDLM11204 |
85 | Providing and fixing LED Battenwith inbuilt heatshink -Polycarbonate housing equippedwith antiglare diffusere and energy efficient Electronic ddriver IP-65including making connections efficacy > 100 lumiens per watt,harmonics < 10,CRI >80 ,Power factor > 0.95, testing and commissioning etc. as required complete in all respects. as required with warranty of 5Year`s from the date of installation at site.. |
86 | Truss LED 20 WattIndustrial Batten IP-65 |
87 | (Make:- Havells , GE , Phillips /Jaguar( Cat No. PBTMO5204) Make :- Panasonic |
88 | Providing and fixing,decorativeand corrosion Proof LED High Way 2-60 watt Built -inSPD,10 KV surgeprotectionIP-68 LED Module ,IP-67 Driver/Connector efficiency upto 150 Im/w,complete with all accessories, connections, testing and commissioning etc. as required. with warranty of 5Year`s from the date of installation at site. |
89 | Polar Prime High Way 2( Cat No,3188)60 wattMake:- K-Lite |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail