Himachal Pradesh State Industrial Development Corporation Limited-HPSIDC has published Construction Of Instrument Lab And Providing Space For Modern Instruments In Biological, Chemical And Physical Science Lab In Rfsl Dharamshala Distt. Kangra ( Hp ) . Construction Of Instrument Lab And Providing Space For Modern Instruments In Biological. Submission Date for this Tender is 29-07-2021. Building Work Tenders in Dharamshala (Kangra) Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition below G.L. upto 1.50Metres depth and disposal of unserviceable materials within all leads and lifts. Un-reinforecd cement concrete upto 15 cm including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 2 | Demolition above G.L. upto floor two level including disposal of unserviceable materials within all lead and lifts and including cutting the necessary reinforcement and separating out from R.C.C. work including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 3 | Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within all leads and lift in cement mortar including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 4 | Dismantling steel work upto span of 10 metres and a height of 5 metres in built up sectional in angles, tees, flats and channels including all gusset plates, bolts, nuts, beading etc and stacking the materialwithin all leads and lift including dismembering. |
| 5 | Taking out doors, windows and clerestory windows shutters (steel , aluminum orwood) including stacking with in all leads and lifts |
| 6 | Excavation in foundation trenches etc.in earth work in all kind of soil lift upto 1.50mtr.stacking the excavated soil not more than 3 mtrs.clear the edge of excavation and then returning the stacked soil in 15cm consolidating each deposited layer by ramming,watering and then disposing of all surplus excavated earth as directed in all leads and lifts. |
| 7 | Providing and laying cement conrete 1:6:12(1cement:6sand: 12graded stone aggregate 40mm nominal size) and curring complete exculding cost of form work in foundation and plinth. |
| 8 | Random rubble masonary/polygonal rubble masonary un-coursed/brought courses with hard stone ofapproved quallity in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement:6sand: 12graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6(1cement:6sand). |
| 9 | Form work:-Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty intofive millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in situ-reinforced concrete and plain concrete work, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. Foundation, footings bases of columns etc. and mass concrete. |
| 10 | Columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in Super-structure for all floor level in all heights. |
| 11 | Beams, cantilevers, girders and lintels sides and soffits of beams, beam hunchings, cantilevers, bressumers and lintelsup to any depthin Super-structure for all floor level in all heights. |
| 12 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto any thickness in Super-structure for all floor level in all heights. |
| 13 | Providing and layingreinforcedcement concrete 1:1.5:3 (One cement : one point five sand : three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) and curing complete excluding cost of form work and reinforcement for concrete work,including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (a) Foundation footings bases of columns, vertical surfaces and the like and mass concrete. |
| 14 | Column, pillars, posts and strutsfor all floors in all heights. |
| 15 | Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantileversfor all floors in all heights. |
| 16 | Providing Tor steel reinforcement including cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position including cost of binding wire completein Super-structure for all floor level in all heights,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 17 | Boulder filling under floors including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 18 | Brick work using common burnt clay building bricksin super structure for all floors in all heights usingsecond class bricks in cement mortar 1:6 (One cement isto six sand) and curing complete including carriage of material through all modes of transporationwithin all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge |
| 19 | Half Brick masonry in common burnt clay building bricks in Cement Mortar 1:6 (One cement: six sand) in 1st class bricks inSuper-structure for all floors in all heights including curing complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 20 | Providing and fxing aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections to of approved make . conforming to 733 andIS 1285 anodised transparent or dyed to required shade accordingto IS 1868.(Minimum anodic coating of gradeAC15 ) fixedwith rawplugs and screws or withfixing clips, or with expansion hold fastners i/c necessary filling up of gapsat junctions , at top , bottom and sides with frequired PVC/ Neoprene felt etc. aluminium sections shall be smooth ,rustfree ,straight ,mitred and jointed mechanically where ever required i/ccleat angle, aluminium ,snap beading for glazing /panelling C.P.brass/ stainless steel screws .All complete as per Architectural drawing and the directions of Enginner in charge. a)For doors windows and ventilators and glazed partitions frames. |
| 21 | b) For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisionsfor fixing of fitings where ever required including the cost of PVC /neoprene gaskes as required .(fittings and glazing /panelling shall be paid for seperatly.) |
| 22 | Providing and fixing aluminium grills including fixing with aluminium U section complete in all respect including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 23 | Providing and fixing stainless wire gauge of IS gauge designation 85G with wire of .56mm to windows and clearstory window i/c U section of aluminium in beading of including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 24 | Providing and fixing glazing in aluminium door ,windows ,ventilators shutters and partition etc with PVC/ neo[rens gaskets etc. Complete as per the architectural drawings and thedirection of Engineer including aluminium snap beading and glazing. Glazing with glass panes of 5.50mm thickness(weight not less than 13.75 kg/sqm. |
| 25 | Providing and fixing prelaminated board boiled water proof(BWP) phenol bonded exterior /interior grade 12 mm thick. |
| 26 | Providing and fixingaluminium sliding door blotdyed to required colour and shade with bolts and nuts screws etc.complete. 250mm x16mm. |
| 27 | Providing and fixing aluminium tower bolts(barrel type) anodized transparent or tyed to required shade andcolour with screws etcs.complete including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. b)150x10mm |
| 28 | Providing and fixing aluminium handles dyed to required colour or shade with necessary screws etc.complete including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge.(a)200 mm |
| 29 | b)150mm |
| 30 | Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion,screws etc.to suit shutter thickness complete including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 31 | Providing and fixinghydroulic door closer for doors.including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 32 | 6mm cement plaster to ceiling in cement mortar 1:4 (1cement:4sand).including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 33 | 15 mm cement plaster in single coat on the rough side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 34 | 15 mm (Fifteen millimeter) cement plaster in single coat on fair side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm (Eighty millimeter) in girth and finished even and smooth. Cement mortar 1:6 (One cement : six sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 35 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 36 | Providing and laying spartic ceremic tiles 5.5 mm thick in flooring (300x300mm size) treads or steps laid onabed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 37 | Digital wall tiles 6mm thick in skirting risers or steps and dado on 12mm thick cement plaster 1:3(1cemen:3sand) and jointed with white cement slurry. including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 38 | Providing and laying granite stone in flooring 20mm (avg) thickness base of cement mortar 1:3 (1 cement :3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20 mm thick including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 39 | Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 40 | Applying Birla white care wall putty over plaster surface after throughly brushing the surface free from mortor drops ,dust ,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 41 | Distempering (Two coats) with Ist quality oil bound washable distemper of Asian paints or equivlant of approved shade and manufacture on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 42 | Finishing wall withweather proof exterior grade emulsion of approved design (Apexultima) or its equaeliet on undecoratedwall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete. |
| 43 | Providing and fixing on wall face PVC (D-Plast)rain water pipe of working pressure not less than 4kg/sqm. including filling the joints with approved adhesive complete.100mm dia pipes. |
| 44 | Providing and fixing on wall face PVC (D-Plast) accessories for rain water pipe of working pressureincluding filling the joints with approved adhesive complete.150mm dia PVC plain bend. |
| 45 | Providing and fixing 0.60 mm (Zero point sixty millimeter) thick prepainted steel sheet of approved make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm (Six millimeter) diametre with prepainted limpet and rubber washers complete with all accessories, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 46 | Providing and fixing ridges 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet withtop coat of regular modified polyster (RNP) organic coating of 20microns over 5 mocrones primer coating i/c fixing with prepainted iron J or L hooks bolts and nuts 6 mm dia meter with prepainted limpet and rubber washers complete with all accessories as required asper the direction of Engineer- in- charge. |
| 47 | Providing and fixing flushing 38 cm (Thirty eight centimeter) over all with 0.45 mm (Zero point forty five millimeter) thick prepainted sheet of approved makein roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating+ back coat of polyster of 5 (Five) microns over 5 (Five) micronsprimer coating i/c fixing with prepainted iron J or Lhooks, bolts and nuts 6 mm dia (Six millimeter diameter) & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. |
| 48 | Providing steel work of BIS specification TATA,SAIL or RASHTRIYA ISPAT welded in built up section/including hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint as per HP. PWD. Specifications of 1990 vplume-Iincluding carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge.In trusses and trussed purlins in buildings. |
| 49 | In gratings framed guard bars, laddres, railing, brackets and similar works. |
| 50 | Providing and fixing M.S.BP sheet 1.66mm to 2mm thickin eaves board /facia/soffits/ceilling i/c cutting,fixing and welding to sheet roof member and applying a coat of red lead paint complete as per the instruction of Engineer in charge |
| 51 | Painting two coats(excluding priming coat)on steel and other metal surfaces with enamel paint,brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter.Enamel paint other than white including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 52 | Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within 20 metres lead.Prepainted /G/I. Sheet roofing including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 53 | Providing and fixing wooden plank ceiling with planks over lapping each other and jointed with wood screws (frame work to be paid for separately) Ist class deodar wood 25mm thick including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 54 | Providing and fixing plain square edged cover fillets (beading) 50mmx12mm section, with wood screws in ceiling and lining including mitring at junction.Ist class Deodar wood. including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 55 | Painting one or more coats on Prepainted / G.I Sheets with readymix paint of approved brand and manufecture on new work to give an even shade including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 56 | Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting. Readymixed paint brushing with white lead for priming including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 57 | Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping Readymixed paint |
| 58 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. 110 mm dia (One hundred ten millimeter diameter) |
| 59 | Providing and fixing on wall face PVC accessories rain water pipes including filling the joints with approved adhesive complete 110mm diameter. (Plain/bend) |
| 60 | Providing and fixing to wall ceiling and floor galvanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. 15mm (Fifteen millimeter) nominal bore |
| 61 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. 110 mm x 90 mm (One hundred ten millimeter into ninety millimeter) |
| 62 | Providing and fixing 10.00/12.50/15.00 ltrs PVC low level flushing cistern with apair of CI or mild steel brackets complete with fittingsincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. . |
| 63 | Providing and fixing GI inlet connection for flush pipe with WC panincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. . |
| 64 | Providing and fixing plastic seat(Solid/Hollow type) and cover for wash down water closet with C.P. brass hinges and rubber buffers:-Solid type white plastic seat and coverincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. . |
| 65 | Providing and fixing jet for WC seatincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. . |
| 66 | Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings.Flat back630x450mm.including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 67 | Providing and fixing Laboratory sink with C.I. Or M.S. Brackets painted white including cutting holes in walls and making good the same but excluding fiitings. Vitreous china size 600x450x250mm.including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 68 | Providing and fixing CP brass waste for wash basin or sink 32 mm dia.including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 69 | Providing and fixing PVC waste pipe for wash basin or sink 32 mm dia.including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 70 | Providing and fixing 100m sand cast iron grating for gully,foor or Nahani trap.including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 71 | Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheetand fixed to wooden plugs with CPbrass screw and washers.including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 72 | Providing and fixing PVC connection pipe with brass unions 30 cms length 15mm nominal size.including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 73 | Providing and fixing CP brass bib tap with capastanhead 15 mm dia.including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 74 | Providing and fixing CP brass pillar tap with capstanhead 15 mm dia. including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 75 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm. including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 76 | Providing and fixing PVC water storage tank of ISI - 12701 marked GI inlet and outklet connection 15mm nominal bore Ball valve and mosquito proof PVC cover with locking arrangement i/c hoisting upto all height above Ground level (Double core)500 ltrs capacity including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 77 | Cutting in earth work and disposal of excavatedearth in all leads and all kind of soil including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 78 | Excavation in foundation trenches etc.in earth work in all kind of soil lift upto 1.50mtr.stacking the excavated soil not more than 3 mtrs.clear the edge of excavation and then returning the stacked soil in 15cm consolidating each deposited layer by ramming,watering and then disposing of all surplus excavated earth including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 79 | Providing and laying cement conrete 1:4:8(1cement:4sand: 8graded stone aggregate 40mm nominal size)and curring complete exculding cost of form work in foundation and plinth including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 80 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 nominal mix 1:3:6 ( 1 cement 3 Sand : 6 crushed graded stone aggregate 20mm nominal size) in walls including carriage of material within all leads and lifts. |
| 81 | Providing and fixing PVC pipe for weep hole 100 mm nominal dia. including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 82 | Boulder filling behing retaining wall including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 83 | Providing and laying interlocking paver tiles 80mm thick as per technical specification clause 1504.including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge |
| 84 | Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous Chinaincluding carriage of material within all leads and lifts. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
