Military Engineer Services-MES has published Repair/ Maintenance Of External Water Supply Sewage Installation Incinerator Forced Ventilation Air Washers And Other Allied Works At Cabinet Sectt Under Ge ( E/M ) Base Hospital Delhi Cantt-10 Repair/ Maintenance Of External Water Supply , Sewage Inst. Submission Date for this Tender is 31-07-2021. Washers Tenders in GE E/M BASE HOSPITAL DELHI CANTT Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-Jul-2021 | EXTENDED DATE | Date | 31-07-2021 |
| 2 | 28-Jul-2021 | AMENDMENT | Financial Bid | 31-07-2021 |
| Name of Work: REPAIR/ MAINTENANCE OF EXTERNAL WATER SUPPLY, SEWAGE INSTALLATION, INCINERATOR, FORCED VENTILATION, AIR WASHERS AND OTHER ALLIED WORKS AT CABINET SECTT UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10 | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | M&L for Removing and cleaning sludge/silt/mud deposition from West side sewage sump of MS building at cabinet sectt sump size 8.0 metre dia X 7.0 metre deep (in two portions) with help of vacuum type pump, necessary T&P and disposal of the collected sludge/silt/mud deposition from sewage installation site to low lying area of NDMC/ Ghazipur sanitary land by means of necessary transport complete up to entire satisfaction of Engr-in-Charge and site requirement complete all specified and as directed.\n(i) All necessary T&P shall be arranged by the contractor. \n(ii) The contractor shall be responsible for cleanliness of equipment and sewage pump house in and around the surrounding area. | 1 | Each Job | |
| 2 | 2 | All as per item No 1.00 here in before but from East side sewage sump of MS building complete all specified and as directed. | 1 | Each Job | |
| 3 | 3 | All as per item No 1.00 here in before but from East side sewage sump of CRF Building (sump size 3.30 metre dia X 3.30 metre deep) complete all specified and as directed. | 1 | Each Job | |
| 4 | 4 | All as per item No 1.00 here in before but from West side sewage sump of CRF Building (sump size 3.30 metre dia X 3.30 metre deep) complete all specified and as directed. | 1 | Each Job | |
| 5 | 5 | M&L for cleaning of semi underground main incoming water supply RCC tank/ sump of capacity 50000 gallons water supply /fire fighting storage in the following stages complete all specified and as directed:-\n(i) Removing/ taking out accumulated mud/ solid waste particles etc, deposited at the bottom of the sump and walls and disposed off the same to Ghazipur sanitary land/ MCD low lying area by means of necessary transport. The cost of transport/ vehicle shall deemed to be included in the unit rate of the item.\n(ii) Washing the RCC sump by clean water and bleaching powder solution after brooming with wire brush all side of wall of sump and dirt and deposited surplus etc all as per site requirement and as directed. | 4 | Each Job | |
| 6 | 6 | All as per ser item No. 5.00 here-in- before but cleaning of RCC over head tank of 10,000 gallons capacity of roof of 11 storied 'E' block complete all as specified and as directed. | 2 | Each Job | |
| 7 | 7 | All as per Ser item No. 5.00 here-in- before but cleaning of RCC over head tank of 5000 gallons capacity at roof of 04 storied 'F' and 'D' block complete all as specified and as directed. | 3 | Each Job | |
| 8 | 8 | M&L for dewatering & cleaning of service tanks with high pressure water jet to remove all masses, algae & dirt and removal of dirty water along with sludge using sludge machine and disposal of the same to a safe distance and applying of anti bacterial sterilization spray to walls, floor and pour water purifier bleaching powder to the tank and clean manually and drain out the dirty water complete of PVC tank of capacity up to 2000 litres complete all as specified and as directed. | 10 | Each Job | |
| 9 | 9 | Dismantling the existing water storage tank and S&F in replacement rotational moulded polyethylene water storage tank in multilayer, 2000 Litres capacity (Cylindrical vertical with closed top) hoisted and fixed in position on existing wall, stage, roof & RCC staging complete all as specified in SSR Part-I including complete connection of inlet and outlet pipe, tank nipple, float valve etc complete all as specified and as directed. | 1 | Each | |
| 10 | 10 | All as per Ser item No. 9.00 here-in- before but 1000 Litre capacity complete all as specified and as directed. | 1 | Each | |
| 11 | 11 | All as per Ser item No. 9.00 here-in- before but 500 Litre capacity complete all as specified and as directed. | 2 | Each | |
| 12 | 12 | S&F in replacement unserviceable sensor suitable for water level indicator of approved make or as per existing make complete all as specified and as directed. | 20 | Each | |
| 13 | 13 | S&F in replacement float Lever Controller switch complete all as specified and as directed. | 1 | Each | |
| 14 | 14 | Testing of water sample as per IS-10500 collected from part of MS building complex from M/S Shri Ram Institute for Industrial research / Bharat test house, Delhi as and when directed by Engineer-n- Charge complete all as specified and as directed. | 6 | Each Sample | |
| 15 | 15 | M&L for flushing/removing mud/silt in bore well casing pipe of size 200 mm bore by using high pressure compressor machine including removing sludge/silt deposited at the low laying area (MCD area/Ghazipur land) complete all as specified and as directed. | 3 | Each Job | |
| 16 | 16 | Lifting of MS ERW column pipes of size 50 mm bore from bore well by tripod and chain pulley, Dismantling/removing unserviceable/corroded portion up to any length complete all as specified and as directed. | 30 | RM | |
| 17 | 17 | M&L for MS ERW column pipes of size 50 mm bore, heavy duty, including cutting, welding & jointing with existing column pipe and lowering to bore well complete all as specified and as directed. | 30 | RM | |
| 18 | 18 | Lifting of defective submersible pump set of capacity 7.5 HP/5.0 HP from bore well of depth 40 to 50 metre by using Tripod and chain pulley and use other resource and transportation from the site to work shop for repair and Transporting back to its original location after carried out necessary repair work and lowering the pump set to bore well and testing for the smooth functioning of submersible pump set complete all as specified and as directed. \nNotes:-\n(i) Any Major part to be repaired/Replaced shall be measured and paid for separately.\n(ii) Cost of minor repair like earth fault, continuity etc shall deemed to be included in quoted rates for this item. | 2 | Each Job | |
| 19 | 19 | M&L for opening the pump set and cutting the burnt winding and removing it from pump motor, cleaning the motor thoroughly and rewinding with new super enamelled copper wire as per original gauge and weight, Insulating varnishing, re- assembling and testing for the smooth functioning of submersible pump set complete all as specified and as directed. | 1 | Each Job | |
| 20 | 20 | S&F in replacement bush suitable for submersible electric motor of capacity 7.5 HP/5.0 HP as per existing model complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 2 | Each | |
| 21 | 21 | S&F in replacement flat submersible cable 3 core of size 6 Sqmm, copper conductor complete all as specified and as directed. | 120 | RM | |
| 22 | 22 | S&F in replacement safety wire for hanging submersible pump set in bore well, with latest rust free insulation complete all as specified and as directed. | 100 | RM | |
| 23 | 23 | M&L for disconnecting electrically and mechanically defective induction electric motor of capacity 60 HP electrically operated three phase 415 volt, shifting to civil workshop for repair, strip opening for inspection, cutting of unserviceable burnt winding, taking out, cleaning of slots, rewinding with new super enamelled copper conductor winding wire of existing size/Gauge and replacement of unserviceable burnt insulating materials, sleeves etc and varnishing including painting the outer surface of motor with two coats of synthetic enamel paint of superior quality after scraping, cleaning and preparation of old painted surfaces complete and other connected works, re-assembling, re-fixing at site, electrical connection, fixing with pump set with nuts, bolts, washers as per original position and testing for satisfactory operation complete all as specified and as directed. \nNote:- (i) T&P items and any other minor items required for installation and commissioning of electric motor shall deemed to be included in the quoted rates.\n(ii) Any electric connection, nut, bolts, washers, flanges including welding and cutting work shall deemed to be included in quoted rates.\n(iii) Any major spares/ parts required for making the motor serviceable shall be measured and paid separately under relevant items of this schedule. | 1 | Each Job | |
| 24 | 24 | All as per srl item No 23.00 here-in-before but capacity of Motor 15 HP complete all as specified and as directed. | 3 | Each Job | |
| 25 | 25 | All as per srl item No 23.00 here-in-before but capacity of Motor 12.5 HP complete all as specified and as directed. | 3 | Each Job | |
| 26 | 26 | All as per srl item No 23.00 here-in-before but capacity of Motor 10 HP complete all as specified and as directed. | 3 | Each Job | |
| 27 | 27 | All as per srl item No 23.00 here-in-before but capacity of Motor 7.5 HP complete all as specified and as directed. | 3 | Each Job | |
| 28 | 28 | All as per srl item No 23.00 here-in-before but capacity of Motor 5 HP complete all as specified and as directed. | 4 | Each Job | |
| 29 | 29 | All as per srl item No 23.00 here-in-before but capacity of Motor 3 HP complete all as specified and as directed. | 2 | Each Job | |
| 30 | 30 | All as per srl item No 23.00 here-in-before but capacity of Motor 1.5/1.0 HP complete all as specified and as directed. | 3 | Each Job | |
| 31 | 31 | M&L for dismantling defective centrifugal/mono block pump of capacity 60 HP and shifting from installation to civil work shop for repairing and replacement of bearings, impeller, shaft, gun metal bush, gland packing and gland plate, nut bolt and washers, studs, gaskets etc including applying two coats of synthetic enamel paint of superior quality after scraping, cleaning and preparation of old painted surfaces complete reassembling /fixing at site to it's original position including testing on load for smooth functioning all as directed including transportation charges, testing and commissioning complete all as specified and as directed. \nNotes:- (i) T&P items and any other minor items required for installation and commissioning of pump set shall deemed to be included in the quoted rates.\n(ii) Any nut, bolts, washers, flanges including welding and cutting work shall deemed to be included in quoted rates.\n(iii) Any major spares/ parts required for making the pump set serviceable shall be measured and paid separately under relevant items of this schedule. | 1 | Each Job | |
| 32 | 32 | All as per srl item No 31.00 here-in-before but capacity of Motor 15 HP complete all as specified and as directed. | 2 | Each Job | |
| 33 | 33 | All as per srl item No 31.00 here-in-before but capacity of Motor 12.5 HP complete all as specified and as directed. | 2 | Each Job | |
| 34 | 34 | All as per srl item No 31.00 here-in-before but capacity of Motor 10 HP complete all as specified and as directed. | 3 | Each Job | |
| 35 | 35 | All as per srl item No 31.00 here-in-before but capacity of Motor 7.5 HP complete all as specified and as directed. | 2 | Each Job | |
| 36 | 36 | All as per srl item No 31.00 here-in-before but capacity of Motor 5 HP complete all as specified and as directed. | 2 | Each Job | |
| 37 | 37 | All as per srl item No 31.00 here-in-before but capacity of Motor 3 HP complete all as specified and as directed. | 2 | Each Job | |
| 38 | 38 | All as per srl item No 31.00 here-in-before but capacity of Motor 1.5/1.0 HP complete all as specified and as directed. | 3 | Each Job | |
| 39 | 39 | S&F in replacement ball bearing for electric motor of capacity 60 HP as per existing model 6314 2Z complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 2 | Each | |
| 40 | 40 | All as per Ser Item No. 39.00 here-in-before but of capacity 15 HP as per existing model 6307 2Z complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 4 | Each | |
| 41 | 41 | All as per Ser Item No. 39.00 here-in-before but of capacity 12.5/10.0 HP as per existing model 6306 2Z complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 10 | Each | |
| 42 | 42 | All as per Ser Item No. 39.00 here-in-before but of capacity 7.5 HP as per existing model 6205 2Z complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 4 | Each | |
| 43 | 43 | All as per Ser Item No. 39.00 here-in-before but of capacity 5 HP (Pump & motor) as per existing model 6204 complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 8 | Each | |
| 44 | 44 | All as per Ser Item No. 39.00 here-in-before but of capacity 3 HP (Pump & motor) as per existing model 6203 complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 8 | Each | |
| 45 | 45 | All as per Ser Item No. 39.00 here-in-before but of capacity 1.5/1.0 HP (Pump & Motor) as per existing model 6202 complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 12 | Each | |
| 46 | 46 | S&F in replacement ball bearing of 60 HP capacity pump as per existing model 6311 complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 4 | Each | |
| 47 | 47 | All as per Ser Item No. 46.00 here-in-before but for capacity 15 HP as per existing model 6207 complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 4 | Each | |
| 48 | 48 | All as per Ser Item No. 46.00 here-in-before but for capacity 12.5 HP as per existing model 6206 complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 4 | Each | |
| 49 | 49 | All as per Ser Item No. 46.00 here-in-before but for capacity 10/7.5 HP as per existing model 6205 complete all as specified and as directed. Make-Tata/HMT/SKF/NBC. | 10 | Each | |
| 50 | 50 | Supply only in replacement Gun metal/CI Impeller (as per existing Model) suitable for centrifugal pump of capacity 60 HP complete all as specified and as directed. | 2 | Each | |
| 51 | 51 | All as per Ser Item No. 50.00 but for capacity 15 HP complete all as specified and as directed. | 2 | Each | |
| 52 | 52 | All as per Ser Item No. 50.00 but for capacity 12.5 HP complete all as specified and as directed. | 2 | Each | |
| 53 | 53 | All as per Ser Item No. 50.00 but for capacity 10 HP complete all as specified and as directed. | 3 | Each | |
| 54 | 54 | All as per Ser Item No. 50.00 but for capacity 7.5 HP complete all as specified and as directed. | 2 | Each | |
| 55 | 55 | All as per Ser Item No. 50.00 but for capacity 5 HP complete all as specified and as directed. | 2 | Each | |
| 56 | 56 | All as per Ser Item No. 50.00 but for capacity 3 HP complete all as specified and as directed. | 2 | Each | |
| 57 | 57 | All as per Ser Item No. 50.00 but for capacity 1.5/1.0 HP complete all as specified and as directed. | 3 | Each | |
| 58 | 58 | Supply only in replacement gasket set suitable for centrifugal pump set of capacity 60 HP complete all as specified and as directed. | 2 | Each | |
| 59 | 59 | All as per Ser Item No. 58.00 but for capacity 15 HP complete all as specified and as directed. | 2 | Each | |
| 60 | 60 | All as per Ser Item No. 58.00 but for capacity 12.5 HP complete all as specified and as directed. | 2 | Each | |
| 61 | 61 | All as per Ser Item No. 58.00 but for capacity 10 HP complete all as specified and as directed. | 3 | Each | |
| 62 | 62 | All as per Ser Item No. 58.00 but for capacity 7.5 HP complete all as specified and as directed. | 2 | Each | |
| 63 | 63 | All as per Ser Item No. 58.00 but for capacity 5 HP complete all as specified and as directed. | 2 | Each | |
| 64 | 64 | All as per Ser Item No. 58.00 but for capacity 3 HP complete all as specified and as directed. | 2 | Each | |
| 65 | 65 | All as per Ser Item No. 58.00 but for capacity 1.5/1.0 HP complete all as specified and as directed. | 3 | Each | |
| 66 | 66 | Supply only in replacement gun metal shaft suitable for centrifugal Electric motor of capacity 60 HP as per existing model and make for Kirloskar/Crompton Greaves make pump set complete all as required at site, as specified and as directed. | 1 | Each | |
| 67 | 67 | All as per Ser Item No. 66.00 here-in-before but for pump set of capacity 15 HP complete all as specified and as directed. | 1 | Each | |
| 68 | 68 | All as per Ser Item No. 66.00 here-in-before but for pump set of capacity 12.5 HP complete all as specified and as directed. | 1 | Each | |
| 69 | 69 | All as per Ser Item No. 66.00 here-in-before but for pump set of capacity 10/7.5 HP complete all as specified and as directed. \n | 2 | Each | |
| 70 | 70 | Supply only in replacement gun metal shaft suitable for centrifugal pump set of capacity 60 HP as per existing model and make for Kirloskar/Crompton Greaves make pump set complete all as required at site, as specified and as directed. \n\n | 1 | Each Job | |
| 71 | 71 | All as per Ser Item No. 70.00 here-in-before but for pump set of capacity 15/12.5 HP complete all as specified and as directed. | 2 | Each Job | |
| 72 | 72 | All as per Ser Item No. 70.00 here-in-before but for pump set of capacity 10/7.5 HP complete all as specified and as directed. | 2 | Each Job | |
| 73 | 73 | All as per Ser Item No. 70.00 here-in-before but for pump set of capacity 5/3 HP complete all as specified and as directed. | 4 | Each Job | |
| 74 | 74 | All as per Ser Item No. 70.00 here-in-before but for pump set of capacity 1.5/1 HP complete all as specified and as directed. | 3 | Each Job | |
| 75 | 75 | M&L for re-metaling/machining work for shaft of centrifugal pump set of capacity 60 HP, welding, grinding, polishing and matching to required size/shape complete all as specified and as directed. | 3 | Each | |
| 76 | 76 | All as per Ser Item No. 75.00 here-in-before but for pump set of capacity 15/12.5 HP complete all as specified and as directed. | 2 | Each | |
| 77 | 77 | All as per Ser Item No. 75.00 here-in-before but for pump set of capacity 10/7.5 HP complete all as specified and as directed. | 2 | Each | |
| 78 | 78 | M&L opening of 80000 CFM centrifugal DIDW blower, cleaning of all parts, dismantling and taking out unserviceable ball bearing and fixing of new ball bearings, alignment of blower and pulley block, welding/cutting work and replacement of unserviceable/rusted MS sheet pieces as required at site, re-assembling of the same and re-fixing at existing location by proper tightening of nuts, bolts and washers complete including applying two coats of synthetic enamel paint of superior quality including scraping, cleaning and preparation of old painted surfaces complete all as specified and as directed. \nNote:- \n(i) Cost of new nuts, bolts, washers as required at site shall deemed to be included in quoted rates. \n(ii ) Ball bearings shall be measured and paid separately under relevant item of this Schedule. | 1 | Each Job | |
| 79 | 79 | Taking out old unserviceable celluloid honeycomb filter pad of thickness 200mm from forced ventilation, cleaning the tower completely and fixing new celluloid honeycomb filter pad of thickness 200mm as per existing pattern and size for forced ventilation at CRF building complete all as specified and as directed. | 16 | Each | |
| 80 | 80 | M&L disconnecting electrically, opening of 40 HP electric motor, 3 phase, 415 volts of Make-Kirloskar, cleaning of all parts, dismantling and taking out unserviceable ball bearing and fixing of new ball bearings, Varnishing of motor, alignment of pulley, re-assembling of the same and painting with two coats of synthetic enamel paint of superior quality including scraping, cleaning and preparation of old painted surfaces complete and re-fixing at existing location by proper tightening of nuts, bolts and washers complete all as specified and as directed.\nNote:- (i) Cost of ball bearings shall be paid separately under relevant item of this schedule.\n(ii) Cost of new nuts, bolts, washers as required at site shall deemed to be included in quoted rates. | 1 | Each Job | |
| 81 | 81 | Supply only in replacement ball bearing for electric motor of capacity 40 HP 6312/C3 complete all as specified and as directed. Make-Tata/HMT/ SKF/ NBC. | 2 | Each | |
| 82 | 82 | Supply only in replacement ball bearing for 80000 CFM centrifugal DIDW blower of 6315/C3 Make- Ventil Air as per existing model complete all as specified and as directed. Make-Tata/HMT/ SKF/ NBC. | 2 | Each | |
| 83 | 83 | Supply only in replacement ball bearing for 20000 CFM air washer unit's blower of P210 as per existing make and model complete all as specified and as directed. Make-Tata/HMT/ SKF/ NBC. | 6 | Each | |
| 84 | 84 | S&F in replacement 'V' belt of size B-84 complete all as specified and as directed. | 4 | Each | |
| 85 | 85 | S&F in replacement 'V' belt of size B-195 complete all as specified and as directed. | 6 | Each | |
| 86 | 86 | S&F in replacement 'V' belt of size B-230 complete all as specified and as directed. | 6 | Each | |
| 87 | 87 | S&F in replacement 3 pole power contactor, 3 phase, 415 volts, 50 Hz, type MNX-50 including front mounting add-on auxiliary contact block complete all as specified and as directed. | 3 | Each | |
| 88 | 88 | S&F in replacement 3 pole power contactor, 3 phase, 415 volts, 50 Hz, type MNX-45 including front mounting add-on auxiliary contact block complete all as specified and as directed. | 4 | Each | |
| 89 | 89 | S&F in replacement 3 pole power contactor, 3 phase, 415 volts, 50 Hz, type MNX-40 including front mounting add-on auxiliary contact block complete all as specified and as directed. | 2 | Each | |
| 90 | 90 | S&F in replacement 3 pole power contactor, 3 phase, 415 volts, 50 Hz, type MNX-32 including front mounting add-on auxiliary contact block complete all as specified and as directed. | 1 | Each | |
| 91 | 91 | S&F in replacement 3 pole power contactor, 3 phase, 415 volts, 50 Hz, type MNX-25 including front mounting add-on auxiliary contact block complete all as specified and as directed. | 1 | Each | |
| 92 | 92 | S&F in replacement 3 pole power contactor, 3 phase, 415 volts, 50 Hz, type MNX-18 including front mounting add-on auxiliary contact block complete all as specified and as directed. | 2 | Each | |
| 93 | 93 | S&F in replacement 3 pole power contactor, 3 phase, 415 volts, 50 Hz, type MNX-12 including front mounting add-on auxiliary contact block complete all as specified and as directed. | 2 | Each | |
| 94 | 94 | S&F in replacement MCCB, Four pole, 250 Amps, 36KA, 415 volts with thermal magnetic release Model DPX 250 complete all as specified and as directed. | 2 | Each \n | |
| 95 | 95 | S&F in replacement MCCB Three pole, 100 Amps, 36KA, 415 volts with thermal magnetic release Model DPX 160 complete all as specified and as directed. | 3 | Each \n | |
| 96 | 96 | S&F in replacement overload relay suitable for range 14-23 A, type MN2 (As per existing sample) complete all as specified and as directed. | 4 | Each | |
| 97 | 97 | S&F in replacement overload relay suitable for range 30-50 A, (As per existing sample) complete all as specified and as directed. | 2 | Each | |
| 98 | 98 | S&F in replacement overload relay suitable for range 45-75 A, type MN5, (As per existing sample) complete all as specified and as directed. | 2 | Each | |
| 99 | 99 | S&F in replacement electronic timer, 3 phase, 240/415 volts, 50 Hz type ET-100, 12 to 120 second complete all as specified and as directed. | 2 | Each | |
| 100 | 100 | S&F in replacement single phase preventer 415 volts, suitable for 3 phase supply complete all as specified and as directed. | 6 | Each | |
| 101 | 101 | S&F in replacement 3 Phase, 415 volt, 50 Hz Semi Automatic Star- Delta starter in sheet steel enclosure suitable for 12.5/ 7.5 HP motor complete all as specified and as directed. | 2 | Each | |
| 102 | 102 | S&F in replacement 3 phase, 415 volt, 50 Hz, DOL starter suitable for up to 7.5/5 HP motor complete all as specified and as directed. | 2 | Each | |
| 103 | 103 | S&F in replacement selector switch or start/stop switch (As per existing sample) complete all as specified and as directed. | 10 | Each | |
| 104 | 104 | M&L for Indicator lamp LED type of colour as per site requirement out of Red/Yellow/Blue or green complete all as specified and as directed. | 30 | Each | |
| 105 | 105 | Lifting of old unserviceable submersible pump set of capacity 5 HP from bore well of depth 40 to 50 metre, disconnecting electrical cables and column pipe from submersible pump set and Supply, installation, lowering, commissioning & testing of submersible pump set 5HP/3.7KW, 50mm outlet size, head range 50-11 meters and discharge150-330 LPM complete all as specified and as directed. | 1 | Each Job | |
| 106 | 106 | Excavation in trenches not exc. 1.5 metre wide and not exc 1.5 metre deep for foundation etc. or for shafts, wells, cesspits, manholes, pierholes etc. in any type of soil for foundation and getting out and levelling of bottom surface to required level complete all as specified and as directed. | 60 | Cum | |
| 107 | 107 | Returning filling including levelling, watering and well ramming soil in layers not exceeding 25 CM complete all as specified and as directed. | 54 | Cum | |
| 108 | 108 | Removing the excavated soil to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting level complete all as specified and as directed. | 6 | Cum | |
| 109 | 109 | Cutting of existing road/PCC/RCC/Hard standing for laying of pipe including making good the disturbed surface to match with the adjoining surfaces with PCC 1:3:6, type C2, using 40 mm graded stone aggregate complete all as specified and as directed. | 2 | Cum | |
| 110 | 110 | Supplying, laying and connecting in replacement GI water tubing 100mm bore, medium grade with all fittings with screwed and socketed joints and fixed complete, laid in trenches, fixed to wall, ceiling or laid in floor and making good the disturbed surface complete all as specified and as directed. | 100 | RM | |
| 111 | 111 | All as per ser item No 110.00 here-in-before but size 80 mm bore complete all as specified and as directed. | 80 | RM | |
| 112 | 112 | All as per ser item No 110.00 here-in-before but size 50 mm bore complete all as specified and as directed. | 120 | RM | |
| 113 | 113 | All as per ser item No 110.00 here-in-before but size 40 mm bore complete all as specified and as directed. | 120 | RM | |
| 114 | 114 | All as per ser item No 110.00 here-in-before but size 25 mm bore complete all as specified and as directed. | 150 | RM | |
| 115 | 115 | All as per ser item No 110.00 here-in-before but size 20 mm bore complete all as specified and as directed. | 100 | RM | |
| 116 | 116 | All as per ser item No 110.00 here-in-before but size 15 mm bore complete all as specified and as directed. | 120 | RM | |
| 117 | 117 | Supply, laying, testing and connecting in replacement MS Pipe, Size 300 mm bore, 6.3 mm thick, heavy duty, flanged ends, including rubber packing, nut, bolt ,washer and butt welded fittings conforming to IS -3589 complete in trenches, wall, ceiling or laid in floor complete with two coats of synthetic enamel paint of superior quality including preparation of new surfaces and making good the disturbed surface complete all as specified and as directed. | 50 | RM | |
| 118 | 118 | All as per ser item No 117.00 here-in- before but size 200 mm bore, thickness 5.9 mm complete all as specified and as directed. | 30 | RM | |
| 119 | 119 | All as per ser item No 117.00 here-in- before but size 150 mm bore, thickness 5.4 mm complete all as specified and as directed. | 30 | RM | |
| 120 | 120 | All as per ser item No 117.00 here-in- before but size 100 mm bore, thickness 5.4 mm complete all as specified and as directed. | 18 | RM | |
| 121 | 121 | All as per ser item No 117.00 here-in- before but size 80 mm bore, thickness 4.85 mm complete all as specified and as directed. | 50 | RM | |
| 122 | 122 | S&F in replacement heavy duty, lined flexible pipe of size 100 mm bore including re-connecting of existing foot valve after cleaning in sewage installations under ground complete all as per site requirement, as specified and as directed. | 30 | RM | |
| 123 | 123 | S&F in replacement cast iron body, Sluice Valve Class PN 1.6, suitable for 200 mm bore pipe, with flange jointing, suitable for external bye pass arrangement, including nuts, bolts & washers etc complete all as specified and as directed. | 1 | Each | |
| 124 | 124 | All as per ser item No 123.00 here-in- before but suitable for 150 mm bore pipe complete all as specified and as directed. | 1 | Each | |
| 125 | 125 | S&F in replacement cast iron body, Butter fly valve, suitable for 300 mm bore pipe, with flange jointing, suitable for external bye pass arrangement, including nuts, bolts & washers etc complete all as specified and as directed. \n\n | 1 | Each | |
| 126 | 126 | All as per ser item No 125.00 here-in- before but suitable for 200 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 127 | 127 | All as per ser item No 125.00 here-in- before but suitable for 150 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 128 | 128 | All as per ser item No 125.00 here-in- before but suitable for 100 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 129 | 129 | All as per ser item No 125.00 here-in- before but suitable for 80 mm bore pipe complete all as specified and as directed. | 3 | Each | |
| 130 | 130 | All as per ser item No 125.00 here-in- before but suitable for 50 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 131 | 131 | S&F in replacement cast iron body, Non return valve, suitable for 100 mm bore pipe, suitable for insertion between flanges complete all as specified and as directed. | 1 | Each | |
| 132 | 132 | All as per ser item No 131.00 here-in- before but suitable for 80 mm bore pipe complete all as specified and as directed. | 4 | Each | |
| 133 | 133 | All as per ser item No 131.00 here-in- before but suitable for 50 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 134 | 134 | S&F in replacement Y type strainer, MS body, flanged ends, suitable for pipe line of size 300 mm bore complete all as specified and as directed. | 2 | Each | |
| 135 | 135 | S&F in replacement Gun -metal, globe or gate valves, with iron wheel head, screwed/ flanged both ends as per site requirement, suitable for 80 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 136 | 136 | All as per ser item No 135.00 here-in- before but suitable for 50 mm bore pipe complete all as specified and as directed. | 6 | Each | |
| 137 | 137 | All as per ser item No 135.00 here-in- before but suitable for 40 mm bore pipe complete all as specified and as directed. | 10 | Each | |
| 138 | 138 | All as per ser item No 135.00 here-in- before but suitable for 25 mm bore pipe, Patti type complete all as specified and as directed. | 10 | Each | |
| 139 | 139 | All as per ser item No 135.00 here-in- before but suitable for 20 mm bore pipe, Patti type complete all as specified and as directed. | 10 | Each | |
| 140 | 140 | All as per ser item No 135.00 here-in- before but suitable for 15 mm bore pipe, Patti type complete all as specified and as directed. | 10 | Each | |
| 141 | 141 | S&F in replacement Ball brass valves, high pressure, with polythene float and fly nut, suitable for 50 mm bore pipe complete, screwed for 50mm bore iron pipe or brass ferrule and fixed complete all as specified and as directed. | 1 | Each | |
| 142 | 142 | All as per ser item No 141.00 here-in- before but suitable for 40 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 143 | 143 | All as per ser item No 141.00 here-in- before but suitable for 25 mm bore pipe complete all as specified and as directed. | 3 | Each | |
| 144 | 144 | All as per ser item No 141.00 here-in- before but suitable for 20 mm bore pipe complete all as specified and as directed. | 15 | Each | |
| 145 | 145 | M & L in replacement PTMT float valve, with epoxy coated aluminium rod and HD ball, suitable for 25 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 146 | 146 | All as per ser item No 145.00 here-in- before but suitable for 20 mm bore pipe complete all as specified and as directed. | 4 | Each | |
| 147 | 147 | All as per ser item No 145.00 here-in- before but suitable for 15 mm bore pipe complete all as specified and as directed. | 15 | Each | |
| 148 | 148 | S& F in replacement vertical, multistage, centrifugal pump set, with 3 phase, 415 Volt, synchronous motor, capacity 15 HP/12.5 KW, 50 HZ, 2910 to 2920 RPM, discharge 26 Cum per Hrs at 50 metre head with suction and discharge point on the same complete all as specified and as directed. | 2 | Each | |
| 149 | 149 | S&F in replacement Gun Metal Foot valve, suitable for 100 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 150 | 150 | All as per ser item No 149.00 here-in- before but suitable for 80 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 151 | 151 | All as per ser item No 149.00 here-in- before but suitable for 50 mm bore pipe complete all as specified and as directed. | 5 | Each | |
| 152 | 152 | All as per ser item No 149.00 here-in- before but suitable for 40 mm bore pipe complete all as specified and as directed. | 3 | Each | |
| 153 | 153 | All as per ser item No 149.00 here-in- before but suitable for 25 mm bore pipe complete all as specified and as directed. | 2 | Each | |
| 154 | 154 | Attending complaints of external water supply installation as and when required / called up by this office for non functional of bore well, submersible pumps or any water supply mains / distribution lines / control valves to make the water supply installation functional round the clock. minor repair will be carried out on spot and other major item shall be measured & paid separately complete all as specified and directed. \nNote:- (i) T&P items and any other minor items required for making water supply installation functional shall deemed to be including in the quoted rates.\n(ii) No payment under this item shall be made, when any major repair shall be required and executed, except supply only items. Where, spare items have been catered in this Schedule as "Supply only", Labour payment may be made under this item based on number of complaints irrespective of Quantity of spare items. | 100 | Each complaint | |
| 155 | 155 | Supply only in replacement GI socket for 50mm/ 40mm bore pipe, ISI marked complete all as specified and as directed. | 30 | Each | |
| 156 | 156 | Supply only in replacement GI socket for 25mm / 20mm / 15mm bore pipe, ISI marked complete all as specified and as directed. | 50 | Each | |
| 157 | 157 | Supply only in replacement GI elbow for 50mm / 40mm bore pipe, ISI marked complete all as specified and as directed. | 20 | Each | |
| 158 | 158 | Supply only in replacement GI elbow for 25mm / 20mm / 15mm bore pipe, ISI marked complete all as specified and as directed. | 30 | Each | |
| 159 | 159 | Supply only in replacement GI union for 50mm / 40mm bore pipe, ISI marked complete all as specified and as directed. | 20 | Each | |
| 160 | 160 | Supply only in replacement GI union for 25mm / 20mm / 15mm bore pipe, ISI marked complete all as specified and as directed. | 30 | Each | |
| 161 | 161 | Supply only in replacement GI equal Tee for 50mm /40mm bore pipe, ISI marked complete all as specified and as directed. | 8 | Each | |
| 162 | 162 | Supply only in replacement GI equal Tee for 25mm / 20mm / 15mm bore pipe, ISI marked complete all as specified and as directed. | 20 | Each | |
| 163 | 163 | Supply only in replacement GI nipple, for 50mm/40mm bore pipe, 4 inch / 6 inch length, ISI marked complete all as specified and as directed. | 25 | Each | |
| 164 | 164 | Supply only in replacement GI nipple, for 25mm / 20mm /15mm bore pipe, 4 inch / 6 inch length, ISI marked complete all as specified and as directed. | 35 | Each | |
| 165 | 165 | Supply only in replacement GI reducer of size 50/40mm or 50/25mm, ISI marked complete all as specified and as directed | 10 | Each | |
| 166 | 166 | Supply only in replacement GI reducer of size 40/25mm or 40/20mm, ISI marked complete all as specified and as directed. | 10 | Each | |
| 167 | 167 | Supply only in replacement GI reducer of size 25/20mm or 25/15mm or 20/15mm, ISI marked complete all as specified and as directed.\n | 10 | Each | |
| 168 | 168 | M&L for opening of 20000 CFM air washer unit, cleaning of all parts, dismantling and taking out unserviceable ball bearing and fixing of new ball bearings, alignment of blower and pulley block, welding/cutting work and replacement of unserviceable/rusted MS sheet pieces as required at site for stoppage leakage, re-assembling of the same and re-fixing at existing location by proper tightening of nuts, bolts and washers and change the water rusted tray complete all as specified and as directed. \nNote:- \n(i) Cost of new nuts, bolts, washers as required at site shall deemed to be included in quoted rates. \n(ii) Ball bearings and shaft shall be measured and paid separately under relevant item of this Schedule. | 2 | Each Job | |
| 169 | 169 | Supply only gun metal shaft suitable for 20000 CFM centrifugal DIDW blower as per existing model and make complete all as required at site, as specified and as directed. | 2 | Each | |
| 170 | 170 | Supply only gun metal shaft suitable for 60000 CFM centrifugal DIDW blower as per existing model and make complete all as required at site, as specified and as directed. | 1 | Each | |
| 171 | 171 | Supply only gun metal shaft suitable for 80000 CFM centrifugal DIDW blower as per existing model and make complete all as required at site, as specified and as directed. | 1 | Each | |
| 172 | 172 | Supply only ball bearing for 80000 CFM centrifugal DIDW blower of P215 complete all as per existing make and model complete all as specified and as directed. | 2 | Each | |
| 173 | 173 | Disconnecting and dismantling old unserviceable air washer unit of 20000 CFM and Supply, installation, testing & commissioning in replacement 20000 CFM air washer unit including making all connection complete all as specified and as directed. | 1 | Each | |
| 174 | 174 | Supply only in replacement high temperature door gasket made out of asbestos as per existing size and shape complete all as specified and as directed. | 2 | Each Job | |
| 175 | 175 | Supply only in replacement thermocouple rod made out of stainless steel of 12 mm dia, 450 mm long, 'K' type as per existing size and shape complete all as specified and as directed. | 3 | Each | |
| 176 | 176 | Supply only fire bricks for primary and secondary chamber of gas fired incinerator complete all as specified and as directed. | 120 | Each | |
| 177 | 177 | Supply only cast able compound suitable for laying of fire bricks in primary and secondary chamber of Gas fired incinerator complete all as specified and as directed.\n | 3 | Each bag of 25 Kg | |
| 178 | 178 | Supply only in replacement electronic burner tip of suitable size for 300000 K/Cal capacity burner complete all as specified and as directed.\n | 1 | Each | |
| 179 | 179 | S&F in replacement Sequence controller for burner GASXP 40 as per existing make and model complete all as specified and as directed. | 1 | Each | |
| 180 | 180 | S&F in replacement HT ignition transformer for burner GASXP 40 as per existing make and model complete all as specified and as directed. | 1 | Each | |
| 181 | 181 | S&F in replacement Blower fan as per existing model complete all as specified and as directed. | 1 | Each | |
| 182 | 182 | S&F in replacement Brass gas nozzle for burner GASXP 40 as per existing make and model complete all as specified and as directed. | 1 | Each | |
| 183 | 183 | S&F in replacement Gas strainer, flanged ends, size 40 mm bore with working pressure 5 Kg/Sqcm complete all as specified and as directed. | 1 | Each | |
| 184 | 184 | S&F in replacement Canvas cloth capable to withstand high temperature, including stiching to required size and shape anf fixing to incinator & air washer complete all as specified and as directed. | 5 | Sqm | |
| 185 | 185 | S& F in replacement LED Bulk head light fitting,18 watts complete all as specified and as directed. | 130 | Each | |
| 186 | 186 | Dismantling and taking down corroded/worn out base frames/pit covers, any type of water supply/ fire incinator installations and S&F in replacement base frames/pit covers, MS angle iron frame /MS plates/MS flat or round bars including welding work, duly painted with two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed. | 200 | Kg | |
| 187 | 187 | M&L for applying two coat of Synthetic enamel painting on old MS pipes etc up to 300 mm bore, as per existing colour code, over and including one coat of red oxide primer including scraping of old paints and preparation of surfaces with emery paper complete all as specified and as directed. | 40 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
