| 1 | 1 | Dismantling all types of masonry excepting cement\nconcrete plain or reinforced, stacking serviceable\nmaterials at site and removing rubbish as directed\nwithin a lead of 75 m. 4th floor\na) In ground floor including roof. | BI01010001010000000000000515BI0100001113 | 13.725 | Cum |
|---|
| 2 | 1.01 | (b) above 150 mm. thick\n4th floor | BI01010001010000000000000515BI0100001114 | 9.51 | Cum |
|---|
| 3 | 2 | Dismantling artificial stone flooring upto 50 mm.\nthick by carefully chiselling without damaging the\nbase and removing rubbish as directed within a\nlead of 75 m.4th floor\n | BI01010001010000000000000515BI0100001115 | 697.35 | Sqm |
|---|
| 4 | 3 | Stripping off worn out plaster and raking out\njoints of walls, celings etc. upto any height and in\nany floor including removing rubbish within a\nlead of 75m as directed. | BI01010001010000000000000515BI0100001116 | 182.7 | Sqm |
|---|
| 5 | 4 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per\nrelevant IS codes.\nPakur variety | BI01010001010000000000000515BI0100001117 | 16.38 | Cum |
|---|
| 6 | 5 | Dismantling R.C. floor, roof, beams etc. including\ncutting rods and removing rubbish as directed\nwithin a lead of 75 m. including stacking of steel\nbars.\n(a) In ground floor including roof. | BI01010001010000000000000515BI0100001118 | 6.87 | Cum |
|---|
| 7 | 6 | (a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's\nspecification [Cement to be supplied by the Department] | BI01010001010000000000000515BI0100001119 | 1017.3 | Sqm |
|---|
| 8 | 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.\n(i) Pakur Variety | BI01010001010000000000000515BI0100001120 | 5.145 | Cu.M. |
|---|
| 9 | 8 | (b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required) | BI01010001010000000000000515BI0100001121 | 261 | Sqm |
|---|
| 10 | 9 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick\nlayer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm\nbelow mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the\nmanufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).\nb) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength >\n1500 N | BI01010001010000000000000515BI0100001122 | 137.25 | Sqm |
|---|
| 11 | 10 | Supplying, fitting & fixing best quality digital printed Ceramic\ntiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy groutpointing including spacer - 2mm (When tiles are laid overexisting hard ready surface) all complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001123 | 697.35 | Sqm |
|---|
| 12 | 11 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]\n(ii) With 1:4 cement mortar\n(b) 15 mm thick plaster | BI01010001010000000000000515BI0100001124 | 182.7 | Sqm |
|---|
| 13 | 11.01 | (iii) With 1:3 cement mortar | BI01010001010000000000000515BI0100001125 | 137.25 | Sqm |
|---|
| 14 | 12 | Providing and fixing of factory made uPVC Louver window (White Colour) (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising of uPVC multi-chambered with wall thickness of 2.3mm (±0.2 mm ) duly\nreinforced with 1.6 mm (±0.2 mm) thick G. I. Section made from roll forming process of required length (shape & size according to uPVC profile). Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if\nrequired) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. Both vertical sides of the frame, adjustable louver mechanism having one lever shall be fitted with the provision of 4 mm glass. Window frame will be fixed to the wall with 100mm long and 8mm dia for fixing frame to finished wall, plastic packers, plastic caps and necessary\nstainless steel screws etc. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over\nbacker rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-in-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only\nmanufacturer Waranty is aceptable)\nb) Louver Window (Adjustable Louver Only) frame of size 67 x 62 mm both\nhaving wall thickness of 2.3 ± 0.2 mm | BI01010001010000000000000515BI0100001126 | 18.225 | Sqm |
|---|
| 15 | 13 | Providing and fixing 30 mm thick factory made solid PUF (Poly Urethene Foam) core solid PVC shutter shall consists of periferial frame made out of 19 mmX 19mm 19 gauge M S Tube . The core panel shall consist of 20 mm thick high\ndensity of PUF conforming to IS:12436-1988. 5 mm thick PVC sheet to be fixed on both face of the MS frame. The door on all the edge to be sealed with lipping of 10 mm (5x2 mm) thick x 20 mm wide PVC sheet by using solvent cement.20 mm th. partcle board should be Inserted for locking arrangement.\nb) Single pices extruded Puf insulated door shutter of both side laminated wood\ngrains decorative Finish | BI01010001010000000000000515BI0100001127 | 69.15 | Sqm |
|---|
| 16 | 14 | Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm\nM.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member\nall complete as per direction of Engineer-in-Charge.\n(b) Pre-laminated Colour. | BI01010001010000000000000515BI0100001128 | 224.1 | Mtr |
|---|
| 17 | 15 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) | BI01010001010000000000000515BI0100001129 | 319.95 | Sqm |
|---|
| 18 | 16 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and\nas per direction of the EIC. (In Ground Floor)\n(a) One Coat\ni) Water based interior grade Acrylic Primer | BI01010001010000000000000515BI0100001130 | 319.95 | Sqm |
|---|
| 19 | 17 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :\n(Two coats)\nii) Luxury Quality | BI01010001010000000000000515BI0100001131 | 319.95 | Sqm |
|---|
| 20 | 18 | Suppling, fitting and fixing Wall mounted water closet of white glazed vitreous chinaware of approved make and brand in position complete with necessary nut and boalts (Equivalent to Code No. 20061 or 92065 & Model Studio or Rubbic of Hindware or equivalent.) | BI01010001010000000000000515BI0100001132 | 45 | Nos. |
|---|
| 21 | 19 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved\nquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. | BI01010001010000000000000515BI0100001133 | 45 | Nos. |
|---|
| 22 | 20 | Supplying, fitting and fixing porcelain toilet paper holder of approved make\nwith wooden spindle as necessary.\n(iii) Recess roll type size 150 mm X 150 mm | BI01010001010000000000000515BI0100001134 | 45 | Nos. |
|---|
| 23 | 21 | Supplying, fitting and fixing porcelain soap tray of approved make.\n(i) Recessed soap tray of size 150 mm X 150 mm | BI01010001010000000000000515BI0100001135 | 90 | Nos. |
|---|
| 24 | 22 | Supplying, fitting and fixing glass shelf with aluminium guard rails.\n(a) Ordinary type with 5.5 mm sheet glass\n(ii) 600 mm X 125 mm | BI01010001010000000000000515BI0100001136 | 45 | Nos. |
|---|
| 25 | 23 | Supplying, fitting and fixing towel rail with two brackets.\n(a) C.P. over brass\n(iii) 25 mm dia. and 750 mm long | BI01010001010000000000000515BI0100001137 | 45 | Nos. |
|---|
| 26 | 24 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm | BI01010001010000000000000515BI0100001138 | 45 | Nos. |
|---|
| 27 | 25 | Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings.\nWhite | BI01010001010000000000000515BI0100001139 | 45 | Nos. |
|---|
| 28 | 25.01 | Supply UPVC Pipes (B type) & fittings conforming to IS 13592-1992 \nii) Double Socketed 3 meter length\n© 160 mm 3x2x3.00 = 18 meter | BI01010001010000000000000515BI0100001140 | 270 | Mtr |
|---|
| 29 | 26 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992\nDouble Socketed 0.9 Meter Length\n(b) 110 mm | BI01010001010000000000000515BI0100001141 | 121.5 | Mtr |
|---|
| 30 | 26.01 | (vii) Double Socketed 0.60 Meter Length\n(b) 110 mm | BI01010001010000000000000515BI0100001142 | 81 | Mtr |
|---|
| 31 | 26.02 | (B) Fittings\nvii) Double Y\n(b) 110 mm | BI01010001010000000000000515BI0100001143 | 45 | Nos. |
|---|
| 32 | 26.03 | xii) Door Bend (LH) & (RH)\n(b) 110 mm | BI01010001010000000000000515BI0100001144 | 135 | Nos. |
|---|
| 33 | 26.04 | x) Bend 87.5º\n(b) 110 mm | BI01010001010000000000000515BI0100001145 | 135 | Nos. |
|---|
| 34 | 26.05 | xv) Vent Cowl\n(c) 160 mm | BI01010001010000000000000515BI0100001146 | 90 | Nos. |
|---|
| 35 | 26.06 | xviii) W.C. Connector (450 mm long) W / lipring\n75 mm | BI01010001010000000000000515BI0100001147 | 135 | Nos. |
|---|
| 36 | 26.07 | xxiii) 110/110 S Trap\n75 mm | BI01010001010000000000000515BI0100001148 | 90 | Nos. |
|---|
| 37 | 27 | Supplying, fitting and fixing pillar cock of approved make.\nf) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand). | BI01010001010000000000000515BI0100001149 | 90 | Nos. |
|---|
| 38 | 27.01 | e) (ii) CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand). | BI01010001010000000000000515BI0100001150 | 45 | Nos. |
|---|
| 39 | 27.02 | e) (i) CP Centre hole Basin mixture with regular spout without popup waste system with 450 mm long braided hoses. (Equivalent to Code No. 5167(B) & Model - FLORENTINE of JAQUAR or similar brand). | BI01010001010000000000000515BI0100001151 | 45 | Nos. |
|---|
| 40 | 28 | Supplying, fitting and fixing bib cock or stop cock.\n(ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) | BI01010001010000000000000515BI0100001152 | 90 | Nos. |
|---|
| 41 | 28.01 | (ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001153 | 90 | Nos. |
|---|
| 42 | 28.02 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar | BI01010001010000000000000515BI0100001154 | 90 | Nos. |
|---|
| 43 | 29 | Supplying, fitting and fixing shower of approved brand and make.\n(d) Chromium plated Hand shower with Flexible Tube &\nfittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).). | BI01010001010000000000000515BI0100001155 | 90 | Nos. |
|---|
| 44 | 29.01 | (b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar\nor similar brand). | BI01010001010000000000000515BI0100001156 | 45 | Nos. |
|---|
| 45 | 30 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).\n(vii) 25 mm dia | BI01010001010000000000000515BI0100001157 | 45 | Nos. |
|---|
| 46 | 31 | Supplying, fitting and fixing CPVC (Chlorinated\nPolyvinyl Chloride) pipes of approved make conforming\nto IS-15778: 2007 . with all necessary accessories,\nspecials viz. socket, bend, tee, union, cross, elbo, nipple,\nlongscrew, reducing socket, reducing tee, short piece etc.\nfitted with holder bats clamps, including cutting pipes,\nfitting, fixing etc. complete in all respect including cost\nof all necessary fittings as required,jointing materials in\nany position above ground. (Payment will be made on\nthe centre line measurements of total pipe line including\nall specials. No separate payment will be made for\naccesories, specials.\n(b) For Concealed Work\n(i) CPVC Pipes Class-1,SDR-11\n15 mm | BI01010001010000000000000515BI0100001158 | 315 | mtr. |
|---|
| 47 | 31.01 | 20 mm | BI01010001010000000000000515BI0100001159 | 225 | mtr. |
|---|
| 48 | 31.02 | 25 mm | BI01010001010000000000000515BI0100001160 | 90 | mtr. |
|---|
| 49 | 32 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary\nand mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto\n1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.\n(A) Above ground\n(iii) 160 mm dia. | BI01010001010000000000000515BI0100001161 | 270 | Mtr |
|---|
| 50 | 32.01 | (ii) 110 mm dia. | BI01010001010000000000000515BI0100001162 | 202.5 | Mtr |
|---|
| 51 | 33 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.\n(ii) 450 mm long | BI01010001010000000000000515BI0100001163 | 45 | Nos. |
|---|
| 52 | 34 | Supplying, fitting and fixing C.I. round grating.\n(ii) 150 mm | BI01010001010000000000000515BI0100001164 | 90 | Nos. |
|---|
| 53 | 35 | Sub Total | | | |
|---|
| 54 | 36 | GST 12% | | 1 | Nos. |
|---|
| 55 | 37 | CESS 1% | | 1 | Nos. |
|---|