Kerala Agro Industries Corporation Limited-KAIC has published Construction Of Waiting Shed At Various Places In Kothamangalam Lac. Submission Date for this Tender is 14-07-2021. Shed Construction Tenders in KOTHAMANGALAM Kerala. Bidders can get complete Tender details and download the document.
| Name of Work: TENDER FOR CONSTRUCTION OF WAITING SHED AT VARIOUS PLACES IN KOTHAMANGALAM LAC | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of Waiting shed of size 5.00m x 2.00m | 1 | ||
| 2 | 1.01 | 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. | 1.01 | 64.386 | cum |
| 3 | 1.02 | 50.6.1.1 Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 1.02 | 36.876 | cum |
| 4 | 1.03 | 50.2.25.1 Filling with contractor's own earth ( excludingIrock) intrenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge | 1.03 | 10.5 | cum |
| 5 | 1.04 | 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:\n1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 1.04 | 20.251 | cum |
| 6 | 1.05 | 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.\nSize of Tile 600 x 600 mm. | 1.05 | 131.04 | sqm |
| 7 | 1.06 | 12.1.3 Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.\n0.63 mm thick with zinc coating not less than 275 gm/m2 | 1.06 | 85.33 | sqm |
| 8 | 1.07 | 25.2 Designing, fabricating, testing, protection, installing and fixing in position Aluminium composite panel (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc directed by the Engineerin- Charge.(ACP Works) | 1.07 | 331.8 | sqm |
| 9 | 1.08 | 50.18.9.19.2 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall | 1.08 | 45.5 | m |
| 10 | 1.09 | 5.1.3 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 1.09 | 11.067 | cum |
| 11 | 1.1 | 13.1.1 12 mm cement plaster of mix:\n1:4 ( 1 cement : 4 fine sand) | 1.1 | 53.76 | sqm |
| 12 | 1.11 | 11.36 Providing and fixing I stquality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 1.11 | 36.96 | sqm |
| 13 | 1.12 | 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.)including cutting,hosting,fixing position and applying a priming coat of approved steel primer ,including welding and bolted with special shaped washers etc.complete | 1.12 | 3048.51 | kg |
| 14 | 1.13 | MR Supplying and fixing of 40cm x 40cm size 12mm thick MS plate over the pillar foundation and below the 150mm steel pillar using 12mm dia SS bolt and nuts including rib reinforcement | 1.13 | 1 | LS |
| 15 | 1.14 | MR Supplying and fixing of 6" x10" size 10mm thick MS plate over the pillar and beam | 1.14 | 1 | LS |
| 16 | 1.15 | MR board writing and designing | 1.15 | 1 | LS |
| 17 | 1.16 | MR Fabricating and fixing of seating arrangement using stainless steel 3.00 inch pipeof 83 cm height seating plate and reiforcement inside the waiting shed | 1.16 | 1 | LS |
| 18 | 2 | Construction of Waiting shed of size 5.00m x 1.50m | 2 | ||
| 19 | 2.01 | 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. | 2.01 | 5.851 | cum |
| 20 | 2.02 | 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:\n1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 2.02 | 1.125 | cum |
| 21 | 2.03 | 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.\nSize of Tile 600 x 600 mm. | 2.03 | 9.54 | sqm |
| 22 | 2.04 | 12.1.3 Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.\n0.63 mm thick with zinc coating not less than 275 gm/m2 | 2.04 | 9.54 | sqm |
| 23 | 2.05 | 50.18.9.19.2 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall | 2.05 | 6.5 | m |
| 24 | 2.06 | 5.1.3 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 2.06 | 1.824 | cum |
| 25 | 2.07 | 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.)including cutting,hosting,fixing position and applying a priming coat of approved steel primer ,including welding and bolted with special shaped washers etc.complete | 2.07 | 560.32 | kg |
| 26 | 2.08 | 25.2 Designing, fabricating, testing, protection, installing and fixing in position Aluminium composite panel (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc directed by the Engineerin- Charge.(ACP Works) | 2.08 | 18.88 | sqm |
| 27 | 2.09 | MR Supplying and fixing of 40cm x 40cm size 12mm thick MS plate over the pillar foundation and below the 150mm steel pillar using 12mm dia SS bolt and nuts including rib reinforcement | 2.09 | 1 | LS |
| 28 | 2.1 | MR Supplying and fixing of 6" x10" size 10mm thick MS plate over the pillar and beam | 2.1 | 1 | LS |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
