Renovation Of Swarnarekha Hostel , Vikramshila Hostel , Director Bunglow , Extension Of Library And Kitchen Block In Ati Campus At Mayer S Road Ranchi, Ranchi-Jharkhand

TDR : 28414940

Tender Notice
BOQ

Expired

Ranchi , Jharkhand

Tender Brief : Renovation Of Swarnarekha Hostel , Vikramshila Hostel , Director Bunglow , Extension Of Library And Kitchen Block In Ati Campus At Mayer S Road Ranchi

Document Fees
₹ 10000 /-

EMD
₹ 492000.0 /-

Tender Value
Refer document

Submission Date
13-07-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work:Renovation of Swarnarekha Hostel ,Vikramshila Hostel, Director Bunglow, Extension of Library and Kitchen Block in ATI Campus at Mayer’s Road Ranchi
1	1	EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I.		484.88	CU.M
2	2	Extra for earthwork in hard soil as per specification and direction of E/I. (Vide classification of soil item - B)		401.6	CU.M
3	3	FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)		397.93	CU.M
4	4	Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume)		236.342	CU.M
5	5	Providing designation 75-A, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge		790.707	SQ.M.
6	6	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
7	6.01	1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone\naggregate 20 mm nominal size)		89.675	CU.M
8	6.02	1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone\naggregate 40 mm nominal size)		175.696	CU.M
9	7	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
10	7.01	1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone\naggregate 20 mm nominal size)		1.87	CU.M
11	8	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
12	8.01	1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)		36.66	CU.M
13	9	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :\n1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone\naggregate 20 mm nominal size)		11.06	CU.M
14	10	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). ROOF BEAM -		25.71	CU.M
15	11	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). SLAB		43.28	CU.M
16	12	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). LINTEL BAND		1.6	CU.M
17	13	Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in LINTEL with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all comple as per building specificationand direction of E/I. LINTEL		1.59	CU.M
18	14	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).		2.3	CU.M
19	15	Centering and shuttering including struting, propping etc. and removal of form for -
20	15.01	Foundation, footings, bases of columns etc.		148.8	SQ.M.
21	15.02	Columns		129.28	SQ.M.
22	15.03	ROOF SLAB		360	SQ.M.
23	15.04	Beams, plinth beams,-		317.46	SQ.M.
24	15.05	STAIRS -		46	SQ.M.
25	16	Providing tor steel reinforcement TMT FE 500 of following dia. rods as per approved design and drawing including carriage of bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. \n(ONLY VALID FOR SAIL & TATA STEEL, JSPL, ELECTRO STEEL LTD. AND VIZAG STEEL)
26	16.01	TOR 8 MMDIA.		5.49	MT
27	16.02	TOR 10 MMDIA.		2.475	MT
28	16.03	TOR 12 -32 MM DIA.		9.075	MT
29	17	Providing designation 75A brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I.		77.87	CU.M
30	18	Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)		9.71	SQ.M
31	19	Providing designation 75 A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge		52.17	CU. M
32	20	Providing 125 mm thick REINFORCED DESIGNATION 75 A BRICK WORK in C.M. (1:4) in SUPERSTRUCTURE with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15 mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of Engineer Incharge .		102.55	SQ.M
33	21	Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.		94.08	SQ.M
34	22	Providing 12mm cement plaster(1:3) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I.		68.37	SQ.M
35	23	Providing 1.5 mm th. cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.		68.37	SQ.M
36	24	Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I		2952.93	SQ.M.
37	25	Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I		343.89	SQ.M.
38	26	Providing 12 mm thick water proof CEMENT PLASTER (1:6)on outside wall with clean coarse sand of F.M.1.5 and 5% cico/ waterproofing compound as specfied including cost of screening, curing making grooves with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. (Cost of cico/ waterproofing compound will be paid separately)		400.96	SQ.M.
39	27	Providing tuck pointing [1:3] in cement on brick work clean coarse sand of F.M 1.5 FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I		71.16	SQ.M
40	28	Supplying chemical emulsion in sealed containers including delivery as specified.\n2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20%		310	LITRE
41	29	Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
42	29.01	Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
43	29.02	With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration		771.15	M
44	30	Providing & fixing FAN HOOK of 16 mm dia M.S. bar, 1 M long bent to required size and shape, placed in position and fluid in the R.C.C. slab-beam at the time of casting all complete as per building specification and direction of E/I. (where material is no		4	EACH
45	31	Providing and laying DOUBLE CHARGE VITRIFIED FLOOR TILES in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS : 15622/ ISO 13006, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.30 kg per sqm including grouting the joints with white cement and matching pigments etc. complete.
46	31.01	SIZE OF TILE- 600MMX600MM		1091.16	SQ.M.
47	32	Marble stone flooring with 18 mm th. Marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with:
48	32.01	Udaipur Green Marble		12.79	SQ. M
49	33	Providing and fixinging 20 mm thick mirror polished, machine cut for kitchen platform and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 (1cement :4 coarse sand) laid and jointed with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
50	33.01	Granite of any colour and shade
51	33.02	Area of slab over 0.5 sqm -		215.61	SQ. M
52	34	Extra for providing edge moulding to Granite stone counters, vanities etc. over above including machine polishing to edge to give high gloss finish etc. complete as per design approved by Architects / E/I.		141.09	R.MT.
53	35	Providing and laying 25 mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size texture and colour laid over 12 mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing taxes and royalty all complete as per building specification and direction of E/I.		16.3	SQ.M
54	36	Extra for pre finished nosing to treads of steps of Kota stone/ sand stone slab		39.01	M
55	37	Providing and laying 6 mm precast SEMI GLAZED CERAMIC TILES of approved quality in DADO over 12mm cement mortar (1:3) and jointed with white cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I
56	37.01	with grade A coloured 15cmx15cm tiles.		111.96	SQ. M
57	38	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
58	38.01	Ordinary cement without any pigment		75.25	SQ. M
59	39	suppling , fitting and fixing good quality well dressed and well seasoned sal wood work in chaukhat in doors window ,sky light, fanlight and celevitial window opening including wedge over clmps all including application of two coats of wood preservative of approved quality on the surface , building walls and lintel all complete as per building specification and direction of El.		0.27	CUM
60	40	Supplying, fitting & fixing 35 mm th. Solid core type non-decorative single leaf FLUSH DOOR SHUTTERS in doors with block board core blended with high quality phenol formal dehydes synthetic resinboth side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts , handle,cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I.		5.24	SQM
61	41	Supplying, fitting & fixing 35 mm th. Solid core type non-decorative Double leaf FLUSH DOOR SHUTTERS in doors with block board core blended with high quality phenol formal dehydes synthetic resinboth side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts , handle,cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I.		17.89	SQM
62	42	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
63	42.01	Float glass panes
64	42.02	5.0 mm thick glass panes (weight not less than 12.5 kg per sqm)		9.1	SQM
65	43	Providing and fixing Double action hydraulic floor spring of approved brand and manufacture I.S.:6315 marked, Hardwyn Make (Model 3000) or equivalent for doors including cost of cutting floors as required, embedding in floors & cover plates with brass pivot and single piece M.S. sheet outer box with side plate etc.complete as per the direction of E/I. WITH STAINLESS STEEL COVER PLATE:-		4	EACH
66	44	Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters (over all area of door shutter to be measured).		23.13	SQ. M
67	45	Providing and fixing bright finished brass 100 mm mortise latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.		2	EACH
68	46	Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.		19	EACH
69	47	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.. \n(Approved Brand - GODREJ/ DORSET)		4	EACH
70	48	Providing and fixing aluminium hanging floor door stoppers ISI marked anodized (anodic coating not less than grade Ac 10 as per I.S. 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper		22	EACH
71	49	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
72	49.01	Particle Board 12 mm thick
73	49.02	Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked		363.5	SQ.M
74	50	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
75	50.01	1.0 mm thick		373.98	SQ. M
76	51	Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle onone side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless\nsteel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).
77	51.01	Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
78	51.02	Two track four panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm).		22.3	SQ.M.
79	52	Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
80	52.01	Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)		57.98	SQ.M.
81	53	Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
82	53.01	Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).		12.2	SQ.M.
83	54	Providing and fixing glazing in aluminium window, ventilator shutters etc. with EPDM / Neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):
84	54.01	With float glass panes of 4.0 mm thickness		181.35	SQ.M.
85	55	Providing and fixing aluminium TOWER BOLTS ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color or shade with necessary screws etc. complete.
86	55.01	300X 10MM		2	EACH
87	55.02	150X 10MM		2	EACH
88	56	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i. e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
89	56.01	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
90	56.02	Powder coated aluminium (minimum thickness of powder coating 50 micron)		32	K.G.
91	57	Supplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.		326.66	KG.
92	58	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roof terraces etc. consisting of following operations.
93	58.01	Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to IS : 2645 over the RCC slab including cleaning the surface before treatment.
94	58.02	Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of cement mortar of mix 1:5 ( 1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 over 20 mm thick layer of cement mortar 1:5 (1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs
95	58.03	After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound conforming to IS: 2645.
96	58.04	Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with proprietary water proofing compund conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300X300 mm square.
97	58.05	The whole terrace so finished shall be flooded with water for minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the E/I.
98	58.06	With average thickness of 120 mm and minimum thickness at khurra as 65 mm. (WORKS TO BE DONE BY REGISTERED APPLICATOR OF PIDILITE/ SIKA/ ROFF WITH 10 YRS. GUARANTEE.)		183.76	SQ.M
99	59	Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :
100	59.01	3 mm thick		1349.83	SQ.M
101	60	Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I		9178.22	SQ.M
102	61	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
103	61.01	New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)		4360.2	SQ.M
104	62	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall suface to prepare the surface even amd smooth complete.		10150.1	SQ.M
105	63	Finishing walls with textured exterior paint of required shade :
106	63.01	New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm		2915.69	SQ.M
107	64	Providing two coats of SYNTHETIC ENAMEL PAINT of approved shade and make over new WOODEN surface including cleaning the surface after removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification dirction of E/I.		2.62	SQ.M
108	65	Providing Primer one coat of read lead paint of approved make over new STEEL SURFACE preparing the surface after cleaning, removing rust, dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I.		353.54	SQ.M
109	66	Providing 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.		353.54	SQ.M
110	67	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, etc.)		99	K.G.
111	68	Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia		22.5	M
112	69	Providing & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion .
113	69.01	Coupler - 110 mm		5	EACH
114	69.02	SHOE - 110MM		5	EACH
115	69.03	BEND - 110 mm		10	EACH
116	70	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
117	70.01	110 MM		30	EACH
118	71	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
119	71.01	12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)		141.4	SQ.M
120	72	Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’.
121	72.01	The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. \n
122	72.02	With 20 mm thick beveled tegular mineral fibre false\nceiling tile (NRC 0.7), (Approved Brand - Armstrong)\n		308.75	SQ.M
123	73	Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge.
124	73.01	Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)		66.98	KG
125	74	Dismantling R. C. C. work including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I.		2.23	CU.M
126	75	Dismantling pucca brick work including stacking serviceable materialsin countable stacks within 15m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I.		6.79	CU.M
127	76	Making Soak Pit 2.5 m diameter 3.0 meter deep with 45x45cm dry briick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standerd design .		1	EACH
128	77	Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.		284.23	K.G.
129	78	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
130	78.01	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works		206.64	KG
131	79	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
132	79.01	With cement mortar 1:4 (1cement: 4 coarse sand)		3112.88	SQ.M.
133	80	Providing Asbestos sheet ceiling with 120x60mm Salwood beams at 122 cm. c/c and 60X40mm Salwood runners at 122cm centers, including cost of 2 coats of wood preservative paint of approved make, fixing at site and taxes all complete as per approved drawing, building specification and direction of E/I. (Approved Brand - V- BOARD/ BISON)		115.94	SQ.M
134	81	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.		12428.5	SQ.M
135	82	Welding charges of shear key to existing reinforcement		1000	EACH
136	83	Providing 25 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing, with all leads and lifts of water, scaffolding, taxes and royality all complete job as per building specification and direction of E/I.		274.02	SQ.M
137	84	Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.		1532.86	SQ.M
138	85	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, etc.)		96	K.G.
139	86	Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm. Depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I		92.9	SQ.M
140	87	Dismantling plain cement or lime comncrete work including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I.		55.37	CU.M
141	88	Dismantling R. C. C. work including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I.		12.39	CU.M
142	89	Dismantling pucca brick work including stacking serviceable materialsin countable stacks within 15m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I.		14.42	CU.M
143	90	Taking down old door and window shutters including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I.		101	EACH
144	91	Taking down choukhats in doors including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I.		1	EACH
145	92	Taking down choukhats in window including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I.		100	EACH
146	93	Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:		3242.33	KG
147	94	Labour for fitting and fixing C.A. sheet roofing in proper slope including the cost of J or L hooks, Limpet & bitumen washers, carriage of sheets to work site and taxes all complete as per building specifications & direction of E/I.		11.78	SQ.M
148	95	Providing and supplying of 6 mm Th.& 1.5m - 3.05 m long C.A. sheeet with all taxes complete.		11.78	SQ.M
149	96	Structural steel work in single section, fixed with or without connecting\nplate,including cutting, hoisting, fixing in position and applying a priming\ncoat of approved steel primer all complete.		31.75	K.G.
150	97	Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).		4359.9	CU.M
151	98	Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment).		2179.95	CU.M
152	99	Supplying and stacking at site dump manure from local or other approved source including royalty and cariage up to 1 km. (Manure measured in stacks will be reduced 8% for payment). Screened through sieve of I.S. designation 4.75 mm.		2179.95	CU.M
153	100	Rough dressing the trenched ground including breaking clods.		9717.34	SQ.M
154	101	Fine dressing the ground		9717.34	SQ.M
155	102	Spreading of sludge, dump manureor / and good earth in required thivkness(Cost of sludge, dump manure or / and earth to be paid seperately).		8719.8	CU.M
156	103	Mixing earth and sludge or manure in proportion specified or directed.		8719.8	CU.M
157	104	Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.		7219.98	SQ.M
158	105	Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.		200	CU.M
159	106	Providing & fixing of White River (Stone) Pables size of 2\" to 2.50\" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.		10	QTL.
160	107	Providing and Displaying Cyprus Golden 30 to 45 cm ht. well developed good Golden colour foliage, Conial Shape in 25 cm Earthen Pots as per direction of the officer-in charge.		10	EACH
161	108	Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge..		200	EACH
162	109	Providing and Displaying Furcaria Variegated hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot as per direction of the officer-in-charge.		6	EACH
163	110	Providing and Displaying Zamia palm well developed with fresh & healthy leaves 90 cm ht in 35 cm cement pot as per direction of the officer-in-charge.		6	EACH
164	111	Providing and displaying of Dracaena mahatma having ht. 30 cm to 45 cm, well developed, fresh and healthy foliage in 20 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge.		50	EACH
165	112	Providing and displaying of Dracaena song of India specimen (three in one), having ht. 60 cm & above, well developed, fresh and healthy with good foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.		50	EACH
166	113	Providing and Displaying of Araucaria cookie having ht. 90 cm to 120 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of earthen pot/plastic pot		20	EACH
167	114	Providing and displaying of Croton Golden specimen having ht. 90 cm to 1.05 cm with 5 to 6 branches, well developed, fresh and healthy foliage in 30 cm size of Earthen pot/Plastic pot as per direction of the officer-in-charge.		20	EACH
168	115	Providing and Displaying Portulaca hybrid in different colour with bloom well developed fresh & healthy in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.		20	EACH
169	116	Providing and Displaying Gerbera Hybrid, well developed, with fresh and healthy foliage, fully blooms in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.		20	EACH
170	117	Providing and Displaying Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot as per direction of the officer-in-charge.		20	EACH
171	118	Providing and Displaying Bamboo Buddha vally variety with umbrella shape having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy as per direction of the officer-in-charge.		10	EACH
172	119	Providing and Displaying Adenium Obesum well developed with fresh & healthy 4 to 5 branch 60 to 75 cm ht. in 40 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.		20	EACH
173	120	Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge.		20	EACH
174	121	Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.
175	121.01	Carnation hybrid		10	EACH
176	122	Providing and Displaying Golden Bottle brush Topiary well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.		6	EACH
177	123	Providing and Displaying Zamia palm well developed with fresh & healthy\nleaves 90 cm ht in 35 cm cement pot as per direction of the\nofficer-in-charge.		6	EACH
178	124	Providing and Displaying Ficus reginold piller type Topiary well developed\nwith fresh & healthy 210 to 240 cm ht in 40 cm Cement Pot as per direction\nof the officer-in-charge.		6	EACH
179	125	Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-165\ncm. with 8-10 branches and healthy foliage in earthen pots of size 30\ncm as per direction of the officer-in-charge.		6	EACH
180	126	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes joining of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL)
181	126.01	Exposed on Wall
182	126.02	25mm dia		612	METER
183	127	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end )
184	127.01	A) 25MM nominal bore		35	EACH
185	128	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.		16000	LTRS
186	129	Supplying and laying (properly as per design and drawing) rip-rap with good quality of boulders duly packed including the cost of materials, royalty alltaxes etc., but excluding the cost of carriage all complete as per specification and direction of E/I.		133.006	CU.M
187	130	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).		22.36	CU.M
188	131	Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.		850.04	SQ.M
189	132	DT: Basic rates for 125/115 mm dia Drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH ring Machine all complete including supplying all meterial, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of engineer-in-charge. (Basic rates)
190	132.01	(i) Drilling up to 30 mtr. Depth below G.L.		90	P/M
191	133	Supplying, assembling, lowering and fixing in vertical position in borewell unplasticized PVC medium well screen (RMS) pipes with ribs, confirming to IS: 12818, including hire and labour charges, fittings and accessories etc. all complete, for all depths, as per direction of engineer-in-charge.
192	133.01	100 mm nominal size dia. -		90	M
193	134	Supplying,filling, spreading and levelling stone boulders of of size range 5cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge.		8.46	CU.M
194	135	Supplying,filling, spreading and levelling gravels of size range, 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in the required thickness, for all leads and lifts, all complete as per direction of E/I.		8.46	CU.M
195	136	Constructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
196	136.01	Inside dimensions 455X610X mm and 45 mm deep for single pipe line with common burnt clay F.P.S. (non modular) bricks of class designation 7.5		134	EACH
197	137	Providing and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 ( lcement : 2 fine sand ) including testing of joints etc. complete.
198	137.01	150 MM dia R.C.C. pipe		600	METER
199	137.02	250 MM dia R.C.C. pipe		275	METER
200	138	Supplying fitting and fixing Galvanised wire mesh of average width of aperture 1.4 mm and nominal\ndia of wire 0.63 mm (2'-0\"x2'-0\"*2) in position as per specification and direction of E/I.		2.22	SQ.M.
201	139	Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge.		50.73	SQ.M.
202	140	CARRAIGE OF MATERIALS
203	140.01	A) COARSE SAND , LEAD - 8 KM.		227.1	CU.M
204	140.02	B) STONE CHIPS , LEAD - 22 KM.		171.3	CU.M
205	140.03	C) BRICKS , LEAD- = 8 KM.		79.83	Thousand
206	141	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. Flushing cistern with munally controlled device (handle lever) conforming to IS:7231 Parryware/ Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
207	141.01	White Vitreous China Orissa pattern W C pan of size 580 X 440 mm with integral type foot rest.		3	EACH
208	142	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled devicde (handle lever), conforming to IS:7231, parryware/Hindware/with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
209	142.01	W.C. pan with ISI marked white solid plastic seat and lid.		32	EACH
210	143	Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.		2	EACH
211	144	Providing and fixing C.P. brass bib cock of approved conforming to IS 8931
212	144.01	15mm nominal bore approved brand C.P. fittings		4	EACH
213	145	Providing and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 810gms.
214	145.01	15mm nominal bore approved brand C.P. fittings		4	EACH
215	146	Providing and fixing C.P Soap Dish of aaproved size, shape and approved brand with concealed fittings, complete job.		39	EACH
216	147	Providing and fixing C.P Tumbler Holder of aaproved size, shape and approved brand with concealed fittings, complete job.		61	EACH
217	148	Providing and fixing C.P. brass angle valve for basin mixer, gyser & others points of approved quality conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings.		262	EACH
218	149	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
219	149.01	White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap		3	EACH
220	149.02	White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps		30	EACH
221	150	Providing and fixing white vitreous china flat back half stall urinal of 580X380X350mm with white PVC automatic flushing cistern, parryware/Hindware with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass with waste fitting as per IS : 2566 P.V.C. trap with outlet grating and other couplings in C.P. brass including parenting of fitting and cutting and making good the walls and floors wherever required..
222	150.01	Single half stall urinals with 5 litre P.V.C. auotmatic flushing cistern		2	EACH
223	151	Deduct the 5 litre P.V.C. auotmatic flushing cistern fron urinal		2	EACH
224	152	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end )
225	152.01	32MM nominal bore.		10	EACH
226	153	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.
227	153.01	25mm nominal bore		40	EACH
228	154	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.		63	EACH
229	155	Providing and fixing 100mm dia. Steel Jali of approved quality.		144	EACH
230	156	Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever required:
231	156.01	kitchen sink without drain board
232	156.02	610x510mm bowel depth 200mm		1	EACH
233	157	Providing and fixing C.P Sink cock with swinging casted spout with concealed fitting arrangements.		1	EACH
234	158	Providing and fixing unplasticised P.V.C. connection pipe with c.p. nuts collar and bush of approved quality.
235	158.01	15 mm nominal bore with 45 cm length.		68	EACH
236	159	Providing And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete.
237	159.01	Flexible Pipe		11	EACH
238	160	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (ITEM FOR RAIN WATER, SOIL, WASTE & VENT PIPES)
239	160.01	75 mm dia		285	METRE
240	160.02	110 mm dia		665	METRE
241	161	Providing & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion .
242	161.01	Coupler -
243	161.02	110 MM		54	EACH
244	161.03	Single pushfit Coupler
245	161.04	110 MM		18	EACH
246	161.05	Single tee with door
247	161.06	110X110X110 MM		34	EACH
248	161.07	Single tee without door
249	161.08	110X110X110 MM		38	EACH
250	161.09	Bend 87.5°
251	161.1	110 MM		25	EACH
252	161.11	SHOE
253	161.12	110 MM		54	EACH
254	162	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.(Approved Brand - ASTRAL/ SUPREME)
255	162.01	Concealed work including cutting chases and making good the wall etc..
256	162.02	15mm dia		465	METER
257	162.03	20mm dia		510	METER
258	163	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL)
259	163.01	Exposed on Wall
260	163.02	25mm dia		260	METER
261	163.03	32 mm dia.		150	METER
262	163.04	50 mm nominal outer dia Pipes		35	METER
263	164	Providing and fixing C.P. Towel Rail 24\" long Towel Rail - CAT. NO. - JAQUAR, AQN - 7711.		34	EACH
264	165	Providing and fixing C.P. Towel Ring Towel Rail - CAT. NO. - JAQUAR, AQN - 7721		63	EACH
265	166	Wiring for light point/fan point/exhaust fan/call bell point with 1.5 sqmm PVC insulated copper conductor cable in surface / recessed PVC conduit with moduler type switch,moduler plate,suitable size GI box etc. as required .		254	PT
266	167	Wiring for light point/fan point/exhaust fan/call bell point with 1.5 sqmm PVC insulated copper conductor cable in surface / recessed PVC conduit with moduler type switch,moduler plate,suitable size GI box etc. as required .		155	PT
267	168	Wiring for twin control light point with 1.5 sqmm PVC insulated copper conductor cable in surface / recessed PVC conduit with moduler type switch,moduler plate,suitable size GI box etc. as required .		10	PT
268	169	Wiring for submain wiring with the following size of PVC insulated, copper conductor single core cable in surface / recessed PVC conduit as required:
269	169.01	2x1.5 sq.mm.+1x 1.5 sq mm(for toilet switch board +6A socket)		1550	M
270	169.02	2x2.5 sq.mm.+1x 2.5 sq mm(for switch board & 6A socket)		1800	M
271	169.03	2x4 sq.mm.+1x 4 sq mm(for AC &16A socket)		5700	M
272	169.04	4 x 6 sq mm +2x6 sq.mm. (Sub-Mains Light DB's)		265	M
273	169.05	4 x 10 +2x10 sq.mm. (Sub-MainsPower DB's)		276	M
274	169.06	4 x 16 +2x16 sq.mm. (Sub-Mains ACr DB's)		50	M
275	170	Supplying and fixing suitable size GI box with moduler plate cover in the front on surface or in recess including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps. moduler type switch, connections painting etc. as required. (For light plugs).		252	Each
276	171	Supplying and fixing suitable size GI box with moduler plate cover in the front on surface or in recess including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps. moduler type switch, connections painting etc. as required. (For power plugs).		164	Each
277	172	Supplying and fixing suitable size GI box with moduler plate cover in the front on surface or in recess including providing and fixing 15/16 amps socket outlet, connections painting etc. as required. (For AC).		85	Each
278	173	Supplying and fixing suitable size GI box with moduler plate cover in the front on surface or in recess including providing and fixing 15/16 amps switch, connections painting etc. as required. (For AC).		85	Each
279	174	Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' catagory, miniature circuit breaker (10 KA) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
280	174.01	single pole(6 to 32A)		372	Each
281	174.02	40 amps.TPN		11	Each
282	174.03	63 amps. TPN		14	Each
283	175	Suppling and fixing following moduler switch / socket on the existing moduler plate & switch box including connection but excluding moduler plate etc. as reqd.
284	175.01	5/6 amps switch		118	Each
285	175.02	5/6 amps socket outlet		118	Each
286	176	Suppling and fixing moduler stepped type electronic fan regulator.		65	Each
287	177	Suppling and fixing moduler type blanking plate.		120	Each
288	178	S/F Dingdong bell		30	Each
289	179	Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with two poles and earth metal enclosed plug top along with 20 amps. \"G\" series, SP MCB (10 KA) in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required.		2	Each
290	180	Supplying and fixing of following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts,on surface /recess, complete with tinned copper bushbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, including painting, earthing etc. as required.
291	180.01	4 way(4+12)double door		13	Each
292	180.02	6 way (4+18)double door		12	Each
293	181	Supplying and drawing following sizes of PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit / PVC casing capping / as required.
294	181.01	3x1.5 sq mm		700	M
295	182	S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required .
296	182.01	20 mm PVC coduit.		400	M
297	182.02	25 mm PVC coduit.		1050	M
298	183	Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
299	183.01	1 run of cable		800	M
300	183.02	2 run of cable		900	M
301	183.03	3 run of cable		900	M
302	184	Supply and Fixing of following sockets including box of required size, grid face plate complete:
303	184.01	1 No x RJ45 Jack Outlet with box & face plate		95	Sets
304	185	Suppyling and drawing co-axial TV cable RG-6 grade cable in the existing surface / recessed steel / PVC conduit as reqd.		1100	Rmt
305	186	Supply of incandescent wall/ceiling light fixtures with holders complete as per standard item with copper wiring as required for proper completion of the work.
306	186.01	Supply & installation of 20/22 W LEDTube lights fittings complete set.		142	Nos.
307	186.02	Supply & installation of 10/12 W LEDTube lights fittings complete set.		43	Nos.
308	186.03	Providing and fixing of Surface/ Recess LED light (12w)		20	Nos.
309	186.04	Providing and fixing of Surface/ Recess LED light (18/20w)		212	Nos.
310	186.05	P/F LED 90/100W street Light complete Set		10	Nos.
311	186.06	Providing and fixing of Surface/ Recess LED Panel light (36w)		30	Nos.
312	186.07	Providing of Decorative Ceiling fans, 1200mm dia sweep		33	Nos.
313	186.08	Providing of Decorative Ceiling fans, 1400mm dia sweep		50	Nos.
314	186.09	Providing of Exhaust fans, 230 mm dia		40	Nos.
315	186.1	Providing of Exhaust fans, 300 mm dia		1	Nos.
316	186.11	Providing of Exhaust fans, 380 mm dia		2	Nos.
317	186.12	Providing of bulkhead fitting with 9/10w LED bulb.		6	Nos.
318	187	Installation, testing and commissioning of prewired, fluorescent fittings, of all types (1 x 28 watt.) complete with all accessories and tubes etc. directly on ceiling / wall, including connections with 1.5 sq.mm. PVC insulated, copper conductor, single core cable etc as required		191	Each
319	188	Installation, testing and commissioning of 1400 mm sweep ceiling fan and regulator including wiring the down rod of standard length (upto 30 cm.) with 1.5 sq.mm. PVC insulated, copper conductor, single core cable etc. as required.		69	Each
320	189	Installation of exhaust fan upto 450 mm. sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connections, testing, commissioning etc. as required.		42	Each
321	190	Erection of ceiling fittings		231	Each
322	191	S/F ceiling rose		275	Each
323	192	Suppplying and drawing following size of FR. PVC insulated, copper conductor single core cable .:
324	192.01	2x1.5 sq.mm		100	METER
325	193	Erection of Garden light in cement concrete 1:3:6 (1cement 3coarse sand 6graded stone aggregate 40 mm nominal size)foundation including excavation and refilling etc.as required.		80	Each
326	194	Laying of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade. Direct in ground including excavation ,sand cushioning protective covering and refilling the trench etc as required.
327	194.01	upto 25sq.mm.		400	METER
328	195.01	Laying of additonal PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade. Direct in ground including excavation ,sand cushioning protective covering and refilling the trench etc as required.		300	METER
329	196.01	Supply of ISI marked (IS : 7098 Pt-I) aluminium conductor XLPE Insulated armoured, served, sheathed cable 1100 volts grade. (Skytone, Rallison, CCI, Gloster make)
330	196.02	2C x10 sq mm		500	METER
331	196.03	4C x 10 sq mm		200	METER
332	196.04	Non Schedule
333	197	Providing & ejecting Chemical emulsion for pre-constructional ANTI TERMITE TREATMENT and creating a chemical barrier under a alround the column pits, wall trenches, basement excavation, top surface of plinth filling junction of wall and floor along the external perimeter of building expansion joints, surrounding of pipes and conducts tic. complete(plinth area of the building at ground floor only shall be measured) with Chlorpyrifos 20% EC as per building specification and direction of E/I. (4 stages treatment)		169.17	SQ.M
334	198	Providing and fixing Roller Blind (VISTA LEVELLOR/ MARVEL) including all fittings and labour, complete job.		203.64	SQ.M
335	199	Providing and fixing in true horizontal level Armstrong Cellio Open cell Aluminium lay-in ceiling tiles with border panels forming flush-tegular edge of size 600mmx600mmx38mm having Fire Performance Class A1 (EN13964). The tile of ‘Global white’ color with cell size 100mm X 100mm shall be laid on white painted Armstrong Suprafine XL15mm profile grid system comprising Main runners (3000mm), 1200mm and 600mm cross tees with 15mm white flanges and 38mm web height. The grid should be of “Armstrong” make with 15mm wide T - section flanges color white having rotary stitching on all T sections i.e. the Main Runner with C3 coupling, 1200 mm & 600 mm Cross Tees with Hardened XL2 Clip having a web height of 38 mm and a load carrying capacity of 14 Kgs/M. The T Sections have a Galvanizing of 90 grams per M2 with pull out strength of 100 Kgs. Suspension system for Armstrong grid to be of Armstrong make. \n\n
336	199.01	INSTALLATION: To comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centers.
337	199.02	ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries consisting of M6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanized spring steel for 2.5 mm wire with a minimum pull strength of 110 kg. The adjustable clip also consists of a 4 mm aquiline wire to be used with the main runner\n \n		206.24	SQ.M
338	200	Providing & Fixing of Armstrong ALUMINUM Lay in Plain metal ceiling consisting of 600x1200mm Lay in tiles in 0.7 mm thick Aluminum post coated to Global white color to be laid on Armstrong grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees. The tiles would have Fire Performance of Class A2-s1.d0 as per EN13501 standard in module size of 600 X 1200mm, suitable for Green Building application, with Recycled content of 50%. The Tile & Grid system used together should carry a 10 year warrantee. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm and a load carrying capacity of minimum 15.68 Kgs/M2. Silhouette, Main Runners & Cross Tees to have mitred ends & “birds mouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 120 grams per M2 & passed through 500 hrs of Salt test. \n \n\n
339	200.01	INSTALLATION: To comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centers.\n
340	200.02	ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries consisting of M6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanized spring steel for 2.5 mm wire with a minimum pull strength of 110 kg. The adjustable clip also consists of a 4 mm aquiline wire to be used with the main runner. \n \n		93.46	SQ.M
341	201	Waterproofing of existing downslab after cleaning the surface to be done with all complete as per following process:- (1) Chipping and cleaning the all surface (2) Fixing of nozzle with 12mm pipe (transparent pvc) with chips and mortar. (3) 1st. layer of 12mm th. plaster of c.m. (1:4) with waterproofing compound (sika super, 2% cement by weight) to be done. (4) 2nd layer of plaster 12mm th. plaster of c.m. (1:4) with waterproofing compound (sika super, 2% cement by weight) to be done and finsh with 6mm thick cement punning. (5) Pressure grouting to be done with cement liquid & sika super chemical (2%) (6) remove nozzle and seal all the hole with c.m. (1:3) & water proofing compound. (7) All curing to be done for minimum 7 days with filling the downslab.		151.24	SQ.M
342	202	Providing treatment of damaged slab from bottom with following process including scaffolding :- a) Cleaning the loose material by metal brush b) Applying Sika Rustoff 100 (as specified) for removing rust from existing steel. c) Applying Sika Rustop (as specified) for check rust of steel. d) Applying Sika Latex power (bonding chemical, as specified) on all damaged surface for plastering to be done.		274.02	SQ.M
343	203	Providing & fixing of 6 mm thick Exterior Grade High Pressure Laminates of Royale Touche make, complete fabrication with 63.5 mm x 38 mm x 1.8 mm thick colour anodized aluminium extruded section vertical member fixing on the wall structure by M.S. bracket (duly fastening) & nuts, bolts. Laminates fixing of Main frame structure with colour Rivets & other necessary hardware as per approved drawing & colour shades details as hereunder:
344	203.01	Structural Specification with following fittings: . Vertical Member : 63.5 mm X 38 mm X 1.8 mm Bracket (M.S.) : 50 mm X 50 mm X 5 mm Fasteners : Fisher / Hilti / Anchor etc Nuts & Bolts : 10 mm X 125 mm High Pressure Laminates : 6 mm thick Royale Touche make Screw & other necessary Hardware fittings : As per standard specification.		514	SQ.M
345	204	Providing and fixing 18\"wide m.s. slotted angle rack 2.0mm th. @ 18\" each rack height, including 2 coats painting of approved colour over red oxide primer complete job. (approx length = 3'-6\" approx, each)		162.58	SQ.M
346	205	Providing and fixing Pop-up 1.5\" dia. Brass Nozzle Sprinkler of best quality (as/ approved quality and design) including all fitings in garden		40	EACH
347	206	RENOVATION OF EXISTING TENNIS COURT (108'-0''X66'-0'', APPROX) with items and details -
348	206.01	Providing & Laying of Frogg SBR cushined synthetic surface, consisting of :\n\ni. Cleaning of Court and filling of minor depressions\nii. 6-8mm SBR (in situ shredded black rubber bound with PU binder).\niii. Two layers of Liquid Fine Rubber\niv. One layer of Fiber Mesh\nv. Two layers of Resurfacer\nvi. Two layers of Color Top Coat\nvii. Line Marking as per game standards		662.19	SQ.M.
349	206.02	Providing lighting for the tennis court, consisting of : \n\ni. Four poles 30’ above ground, 4’ below, 10 gauge MS\nii. The poles would be tapering with 5”, 4” & 3” thickness.\niii. 2’ Square Pipe frame on each pole to accommodate 3 lights each, \niv. Grouting, primer & painting of poles\nv. 16 x 200w LED lights in total\nvi. MCB 63 amp: 16 nos.\nvii. Control Panel with Isolator\nviii. All internal Wiring within the court, 6/4 Aluminium armoured cable, embedded in ground.\nix. Client will provide electric connection till the control panel\nx. Two year warranty on Luminaires		1	COMPLETE JOB
350	206.03	Net Posts & Net : Stainless Steel (304)\nProviding and installing one set of Davis Cup Standard Net Posts & Garware Net with internal winding mechanism, MS, powder coated of standard make.		1	SET
351	206.04	Transport Charge for all above of relevant to tennis court with all complete.		1	ALL COMPLETE
352	207	Providing and fixing Wash basin with accessories, 15mm C.P. pillar cock 32mm C.P brass waste of cutting and making good the wtherever require all complete.
353	207.01	BASIN - CAT. NO. - JAQUAR, CNS-WHT-705 (WITH RIM TOP)		33	EACH
354	207.02	PILLAR COCK - FUS - 29001		33	EACH
355	207.03	BOTTLE TRAP - CAT. NO. - JAQUAR, ALD - 769L - 300X190		63	EACH
356	207.04	WASTE COUPLING - CAT. NO. - JAQUAR, ALD - 709		33	EACH
357	208	Providing and fixing follwing items for shower with all concealed fittings including cutting and making good the wall, all complete.
358	208.01	4 WAY DIVERTER, Concealed Body for single Lever high flow with button assembly, Cartridge sleeve But without exposed part - CAT. NO. - JAQUAR, ALD-079.		34	EACH
359	208.02	SINGLE LEVER EXPOSED PARTS kit of Hi flow Diverter consisting of operating lever, wall flange (with seals) & button only - CAT. NO. - JAQUAR, FUS- 29079 K		34	EACH
360	208.03	OVERHEAD SHOWER 100mm dia. Round shape single flow (ABS Body chrome plated with gray face plate with Rubit cleaning system - CAT. NO. - JAQUAR, OHS - 1989.		34	EACH
361	208.04	SHOWER ARM casted 190mm long wall mounted showers with ss flange - CAT. NO. - JAQUAR, SHA - 477.		34	EACH
362	208.05	BATH SPOUT with wall flange - CAT. NO. - JAQUAR, SPJ - 5429S		34	EACH
363	209	Providing and fixing 450x1700 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.		24	EACH
364	210	Providing & fixing of following unplasticised -P.V.C. moulde fittings / accessories including all complete job.
365	210.01	Nahani Trap
366	210.02	110X75 MM		66	EACH
367	210.03	Multitrap
368	210.04	110X100 MM		78	EACH
369	211	Providing and fixing C.P. brass Health Faucet with 8mm dia. 1.20m long flexible tube & wall hook. Hand Shower - CAT. NO. - JAQUAR, ALD - 573		34	EACH
370	212	Providing & fitting of LED strip light with driver(Havells . AZURE LED STRIP -18W 3000K)		20	Nos.
371	213	Providing and fixing of reading light/wall light fitting		16	Nos.
372	214	S/F of Die cast alluminium body frosted PC diffuser light fitting complete set. (Make JAQUAR ZEXX-CBLD05126XX)		50	Each
373	215	S/F of Die cast alluminium body transparent tempered glass diffuser spike light fitting complete set. (Make JAQUAR ILLUMINE-LSPK05R112XW)		30	Each
374	216	Manufacturing , fabrication ,painting and Installation of Florentine ( Bajaj) / equivalent Deceorative or naturalful nexagonal cast iron Gazebo . Overall size of Gazebo should be 11’x11’ & roof top 10-75 weight . The roof should be made of glass fibre reinforcement of 3 mm thick supported on decortice m.s pole cast iron grill motif as per design bajaj and approved by architect including all foundation work with all complete		3	Each
375	217	Providing and fixing 15'' ht. Stainless steel text (304G RADIUM FINISH) Over wall, as per approved text and design including all taxes and all complete job.		48	EACH TEXT
376	218	Providing, Supplying, installation and fixing of kitchen equipment as per following items, Works to executewd through approved modular kitchen manufacturer (Besteclozza/ Congas), all approval should be taken from architect before placing the work worder.
377	218.01	2 DOOR VERTICAL REFER (- temp.) '-5~+5? All SS construction, Adjustable shelves, Removable gaskets, Digital temperature Display (Carel/ Dixel), Mounted on wheels for easy movement. Locking arrangement, Size -600X700X1950.		1	EACH
378	218.02	4 DOOR VERTICAL FREEZER(- temp.) '-18~- 12? All SS construction, Adjustable shelves, Removable gaskets, Digital temperature Display (Carel/ Dixel), Mounted on wheels for easy movement. Locking arrangement. SIZE - 1200X700X1950.		1	EACH
379	218.03	Chest Freezer - 200 litres		1	EACH
380	218.04	SINGLE BURNER STOCK POT RANGE (Made of Complete SS with Pan supporter - 16/16\". Individual burner with pilot control), SIZE - 600X600X850		2	EACH
381	218.05	TWO BURNER INDIAN RANGE (Made of Complete SS with Pan supporter - 16/16\". Individual burner with pilot control), SIZE - 1200X600X850+1		1	EACH
382	218.06	SUPPORT TABLE W/ BS - Made of complete SS with inverted SS channel, Verticals made of 40x 40mm SS Square Pipe with adjustable nylon bullet. SIZE - 435X585X850+150		4	EACH
383	218.07	DOSA HOT PLATE (Made of Complete SS with TOP made of 12mm Thickness MS Plate) SIZE - 1000X590X850+150		1	EACH
384	218.08	SINGLE SINK UNIT, SIZE - 600X600X850+150		1	EACH
385	218.09	MASALA TROLLEY, SIZE - 500X600X800		1	EACH
386	218.1	GN PANS FOR ABOVE		6	EACH
387	218.11	DOUGH COLLECTING TROLLEY, SIZE - 500X600X800		1	EACH
388	218.12	STONE TOP GRANITE TABLE WITH 1 BS\nMade of complete SS with inverted SS channel, Verticals made of 40x 40mm SS Square Pipe with adjustable nylon bullet. GRANITE IN CLIENTS'S SCOPE, SIZE - 1200X600X850+150		1	EACH
389	218.13	2 DOOR VERTICAL REFER(- temp.) '-5~+5?\nAll SS construction, Adjustable shelves, Removable gaskets, Digital temperature Display (Carel/Dixel), Mounted on wheels for easy movement. Locking arrangement. SIZE - 600X700X1950		2	EACH
390	218.14	4 DOOR VERTICAL FREEZER(- temp.) '-18-12? All SS construction, Adjustable shelves, Removable gaskets, Digital temperature Display (Carel/Dixel), Mounted on wheels for easy movement. Locking arrangement. SIZE - 1200X700X1950.		1	EACH
391	218.15	SS FILTER WITH SS EXHAUST HOOD (IN 2 PART) (for Hot air release with duct)I-LAND TYPE, SIZE - 4285X1350X600.		1	EACH
392	218.16	PICK UP TABLE W/ BS - Made of complete SS with inverted SS channel, Verticals made of 40x 40mm SS Square Pipe with adjustable nylon bullet.		2	EACH
393	218.17	OVERHEAD SHELVES FOR ABOVE		4	EACH
394	218.18	HEATING WARMER		2	EACH
395	218.19	Spiral Mixer (20 Ltrs). Mixing speed : 185(r/min) Bowl speed : 15(r/min) Maximum Kneading Capacity:8kg Power:0.75KW,220V, SIZE - 690x380x730		1	EACH
396	218.2	SS DRAIN TROUGH WITH GRATING, SIZE - 600X300X75		2	EACH
397	218.21	WET MASALA GRINDER(STATIC)- 5Ltr., SIZE - 787X508X889		1	EACH
398	218.22	PULVERISER		1	EACH
399	218.23	SS DRAIN TROUGH WITH GRATING, SIZE - 600X300X75		1	EACH
400	218.24	PANTRY TABLE W/BS, SS with underneath inverted channel. Verticals made of 40x 40mm SS Square Pipe with adjustable nylon bullet. SIZE - 1500X600X850+150		1	EACH
401	218.25	WALL SHELF, SIZE - 900X300		1	EACH
402	218.26	SANDWICH GRILLER - SINGLE NORMAL, SIZE - 320x410x190		1	EACH
403	218.27	SLOT TOASTER - 6 SLOTS, SIZE - 460x230x220		1	EACH
404	218.28	MICROWAVE OVEN OPF 20 LTRS.		1	EACH
405	218.29	SALAMANDER OF STANDARD SIZE -		1	EACH
406	218.3	2 DOOR WORK TOP REFER(+ temp.) '-\n5~+5? All SS construction, Adjustable shelves, Removable gaskets, Digital temperature Display (Carel/Dixel), SIZE - 1200X700X800+150		1	EACH
407	218.31	WALL SHELF, SIZE - 1200X300		1	EACH
408	218.32	CITRUS JUICER, STANDARD - LOCAL		1	EACH
409	218.33	BLENDER, STANDARD		1	EACH
410	218.34	PANTRY PICK UP TABLE W/ BS with\nunderneath inverted channel. Verticals made of 40x 40mm SS Square Pipe with adjustable nylon bullet. SIZE -1200X600X850+450+300		1	EACH
411	218.35	OVERHEAD SHELVES FOR ABOVE		2	EACH
412	218.36	HEATING WARMER		1	EACH
413	218.37	POT RACK - 3 SHELVES, SIZE - 1200X600X1650		1	EACH
414	218.38	SOIL DISH LANDING TABLE W/ GARBAGE\nCHUTE, SIZE - 1100X750X850+150		1	EACH
415	218.39	PRE WASH SINK UNIT, SIZE - 1000X750X850+150		1	EACH
416	218.4	PRE RINSE JET SPRAY - Deck mounted type standard		1	EACH
417	218.41	HOOD TYPE DISH WASHER\nCapacity:1000 plates/hr\nStainless steel body, 60°, 90°, 120°, 180° C seconds programme options, Motor Power:0.55 kw 2800 rpm, Tank heating power:2.8 kw Rinse boiler heating:6 kw Stainless steel resistance. Thermostat control. ( washing temperature:60ºC ),Water consumption: 2.5 lt/time. Magnetic security switch. Programme continues the process by closing of the door.Full automatic washing operation at 55° C rinsing operation with hot water at 80°-85° C. Power:9.5 kw 440V, size - 696 x 765 x 1485		1	EACH
418	218.42	CLEAN DISH LANDING TABLE\nwith underneath inverted channel. Verticals made of 40x 40mm SS Square Pipe with adjustable nylon bullet. Size - 900X750X850+150		1	EACH
419	218.43	CLEAN DISH RACK - 4 shelves, Size - 1100X400X1800		2	EACH
420	218.44	CLEAN DISH RACK - 4 shelves, Size - 900X400X1800		1	EACH
421	218.45	SOIL DISH CARRYING TROLLEY - 2 TIER, Size - 860X550X900		1	EACH
422	218.46	SS DRAIN TROUGH WITH GRATING, SIZE - 600X300X75		1	EACH
423	218.47	GI DUCT LINE FOR HOT AIR VENTILATION SYSTEM, as per site		1	Complete
424	218.48	Heavy duty Exhaust fan and other necessary fittings for above -2 Nos fan 3500 CFM		1	Complete
425	219	Providing, Supplying, installation and fixing of modular kitchen for director's bunglow as per drawing enclosed, excluding Granite counter top and ceramic wall tiles but including the cost of hobs and chimney (Faber make) all shutters (wood work) to be done with 16 mm thick MR tough board with 1.0 mm th. marino laminate and Hettich/ Haffle hinges and fittings, Works to executewd through approved modular kitchen manufacturer (Sleek Kitchen/ Kitchen concept), all approval should be taken from architect before placing the work worder.		1	Complete Job
426	220	Add 12 % GST	BI01010001010000000000000515BI0100001577	1	L.S.
427	221	Add 1% Labour Cess	BI01010001010000000000000515BI0100001578	1	percentage

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Jharkhand Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Renovation Of Swarnarekha Hostel , Vikramshila Hostel , Director Bunglow , Extension Of Library And Kitchen Block In Ati Campus At Mayer S Road Ranchi, Ranchi-Jharkhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Renovation Of Swarnarekha Hostel , Vikramshila Hostel , Director Bunglow , Extension Of Library And Kitchen Block In Ati Campus At Mayer S Road Ranchi, Ranchi-Jharkhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us