Bids Are Invited For Networking & It Equipments Total Quantity : 1---1 Switch Number Of Ports And Power Supply 2 20*10G Sfp+ Port And Additional 4 10Gbase-T / Sfp+ Combo Ports. 3 Should Have Rj-45 And Mini Usb Console Ports For Out-Of-Band Cli Management. 4 One 10 / 100 / 1000Base-T Rj-45 Ethernet For Out-Of-Band Ip Management. 5 One Usb Port For Easy Management For Images And Configuration Files, That Can Be Copied To And From The Nvram Of The Switch. 6 One Alarm Port To Provides An External Alarm Detection. 7 Port Standards & Functions: Ieee 802.3 10Base-T Ethernet, Ieee 802.3U 100Base-Tx Fast Ethernet, Ieee 802.3Ab 1000Base-T Gigabit Ethernet, 802.3Ae 10 Gbe, 802.3An 10Gbase-T, Ieee 802.3X Flow Control For Full-Duplex Mode, Auto-Negotiation 8 Should Support Ieee 802.3Az Energy Efficient Ethernet. 9 Should Support N+1 Power Redundant Mode. Two Power Supply Should Be Supplied With Switch And Ready From Day 1. 10 Performance 11 Switching Capacity Should Be 480 Gbps Or More. 12 64-Byte Packet Forwarding Rate Should Be 357 Mpps Or More. 13 Mac Address Table Should Be 48K Or More. 14 Stackability 15 Switch Should Support Physical Stacking Up To 4 Units Per Stack. Stacking Bandwidth Should Be Up To 80G. 16 Switch Should Have Virtual Stacking Support, Up To 32 Devices Per Virtual Stack. 17 L2 Features 18 Should Support Head Of Line Blocking Prevention For Lower Latency And Better Performance. 19 Support Jumbo Frame Up To 12000 Bytes Or Higher. 20 Should Support Igmp Snooping, Able To Create 500 Or More Igmp Groups And Require Support For Host-Based Igmp Snooping Fast Leave. 21 Should Support Mld Snooping, Able To Create 250 Or More Mld Groups, Per Vlan Mld Snooping And Require Support For Host-Based Mld Fast Leave. 22 Should Have 802.1D Stp, 802.1W Rstp And 802.1S Mstp Spanning Tree Protocol. 23 Should Support Loop Back Detection. 24 Should Support Loop Guard And Root Guard. 25 Should Have Erps As Per Standard Itu-T G.8032 To Provide Protection For Ethernet Traffic In Ring Topology. 26 Should Support 802.1Ax Link Aggregation. 27 Switch Should Support Iscsi Awareness. 28 Vlan 29 Require Ieee 802.1Q Tagged Vlan Protocol. Technical Specification Of Core Switch 30 Should Support 4K Vlan Groups And Configurable Vlan Id: 0 To 4094 Vids 31 Should Support Port-Based Vlan, 802.1V Vlan, Double Vlan ( Q-In-Q ) , Portbased Q-In-Q, Selective Q-In-Q, Mac-Based Vlan, Subnet-Based Vlan, Private Vlan, Ism Vlan ( Multicast Vlan ) , Voice Vlan, Auto Surveilliance Vlan, Vlan Trunking And Garp Vlan Registration Protocol. 32 Layer 3 Features 33 Should Supports 256 Ip Interfaces. 34 Should Support Loopback Interface. 35 Should Support Rfc826 Arp And Rfc1072 Arp Proxy. 36 Should Support Ipv6 Neighbor Discovery ( Nd ) . 37 Should Support Vrrpv2 And V3. 38 Should Have 4K Hardware Routing Entries For Ipv4 / Ipv6. 39 Should Support Static Route, Default Route, Rip And Policy-Based Route ( Pbr ) For Ipv4 And Ipv6. 40 Should Support Graceful Restart ( Gr ) Helper. 41 Should Suppoort Static, Isatap, Gre And 6To4 Ipv6 Tunneling. 42 Should Support Ospf For Ipv4 And Ipv6. 43 Should Support Igmpv1 / V2 / V3 For Layer 3 Multicast. 44 Should Support Dvmrpv3 For Layer 3 Multicast. 45 Should Support Pim-Dm / Sm / Sm V6 / Ssm / Sdm For Layer 3 Multicast. 46 Quality Of Service ( Qos ) 47 Should Support 802.1P Quality Of Service With 8 Queues Per Port. 48 Should Support Queue Handling With Strict Priority Queue, Weighted Round Robin, Deficit Round Robin ( Drr ) , Spq + Wrr And Weighted Deficit Round Robin ( Wdrr ) . 49 Should Support Qos Based On 802.1P Priority Queues, Mac Address, Ip Address, Ipv6 Traffic Class, Ipv6 Flow Label, Dscp, Vlan, Tcp / Udp Port, Tos / Ip Preference, Switch Port, Ethertype And Protocol Type. 50 Should Support Trtcm And Srtcm Three Color Marker. 51 Should Support 802.1Qaz Enhanced Transmission Selection ( Ets ) , 802.1Qbb Priority-Based Flow Control ( Pfc ) And 802.1Qau Congestion Notification ( Cn ) . 52 Access Control List ( Acl ) 53 Should Support Ingress And Egress Acl. 54 Should Support Access Control List Based On 802.1P Priority, Protocol Type, Mac Address, Vlan, Ether Type, Tcp / Udp Port Number, Dscp, Ip Address, Ipv6 Traffic Class And Ipv6 Flow Label. 55 Should Support Time-Based Acl. 56 Security 57 Should Have Port Security With 12K Or Higher Mac Addresses Per Port. 58 Support Per Port Broadcast / Multicast / Unicast Storm Control. 59 Require Dynamic Arp Inspection And Arp Spoofing Prevention. 60 Should Support Dhcp Server Screening. 61 Should Have Ssh And Ssl For Ipv4 And Ipv6. 62 Require Prevention Of Dos Attacks, Which Include Land, Blat, Tcp Null Scan, Tcp Synfin, Ping Of Death Attack And Tcp Tiny Fragment Attack. 63 Support Traffic Segmentation To Limit Traffic Flow From A Single Or Group Of Ports, To A Another Group Of Ports. 64 Should Have Ip+Mac+Port Binding To Restrict The Access To A Switch. 65 Should Support Dhcpv6 Guard, Ipv6 Route Advertisement ( Ra ) Guard And Ipv6 Nd Inspection. 66 Should Support Duplicate Address Detection ( Dad ) . 67 Should Support Bpdu Attack Protection. 68 Should Support Compound Authentication With Multiple Option, Which Should Include 802.1X Port Based, 802.1X Host Based, Wac And Mac For Access Control. 69 Should Support Radius And Tacacs+ Authentication With Authentication Database Failover. 70 Should Support Support 802.1X Nap. 71 Management 72 Able To Manage Trough Web-Gui, Fully Functional Cli Interface And Telnet. 73 Should Support Snmp V1, V2c, V3 And Snmp Traps And Rmon V1 And Rmon V2. 74 Should Have Multiple Image And Configuration File Support To Reduced Down Time For The Switches. 75 Should Support Cable Diagnostics To Test Copper Cables And Determine The Quality Of The Cables And The Types Of Error. 76 Should Support 802.3Ah Ethernet Link Oam And 802.1Ag Connectivity Fault Management ( Cfm ) And Y.1731 Oam. 77 Should Support Sflow ( Rfc3176 ) For Monitoring Traffic In Data Networks. 78 Should Have Sntp / Ntp Protocol For Time Synchronization. 79 Should Have Ipv4 / V6 Dual Stack. 80 Should Support Lldp And Lldp-Med. 81 Physical / Environmental 82 Ac Input: 100 To 240 Vac, 50 / 60 Hz Internal Universal Power Supply 83 Operating Temperature: -5 To 50 ˚C ( 41 To 122 ˚F ) 84 Certifications: Ce, Fcc, C-Tick, Vcci, Bsmi, Ccc 85 Safety: Cul, Cb, Ce, Ccc, Bsmi 86 Switch Should Be Supplied With The All Necessary Hardware Accessories Like Power Cord, Rack-Mount Bracket, Installation Guide, Etc. And Necessary Software Image File To Fulfill All Above Mention Feature Set From Day 1. 87 Make - Ruckus / Aruba / D-Link 88 Make Should Be Mentioned While Submitting The Tender. 89 Authorization Letter From Oem Should Be Provide While Submitting The Tender
