Supply Of Horizontal Autoclave:Horizontal Autoclave:, Horizontal Autoclave: 1. It Should Be Electrically Operated. 2. The Chamber Size Should Be Of Approximately 600Mm X 600Mm X 1200Mm. 3. It Should Have Minimum Sterilizer Chamber Capacity Of 430 Litres. -Kerala

Supply Of Horizontal Autoclave:Horizontal Autoclave:, Horizontal Autoclave: 1. It Should Be Electrically Operated. 2. The Chamber Size Should Be Of Approximately 600Mm X 600Mm X 1200Mm. 3. It Should Have Minimum Sterilizer Chamber Capacity Of 430 Litres. 4. It Should Have Working Pressure Of 30 Psi. 5. Sterilization Chamber And Boiler Material Should Be Of S.S 316 Or Higher Grade Steel 6. Sterilization Door Shall Be Hinge Type With Horizontal Type Opening And Automatic Pressure Locking Device For Protection Against Accidental Door Open 7. It Should Have Vaccum- Breaker / Jacket Air Valve To Allow The Filtered And Sterile Air To Break The Chamber Vaccum And To Help In Quick Drying. 8. It Should Have Safety Valve For Automatic Air Removal To Obtain Saturated Steam. 9. It Should Have Safety Device Against Excess Pressure. 10. It Should Have Multi Control Valve To Carry Out All Functions Of Sterilization Cycle. 11. It Should Have Pressure Guage To Indicate Chamber Pressure. 12. It Should Have Valves For Water Inlet And Outlet 13. It Should Have Glass Tube To Indicate Water Level In Broiler 14. It Should Have Magnetic Level Switch To Protect Heater From Low Water Level. General Specification Of Horizontal Autoclave 1. It Should Have European Ce / Usfda / Bis Certification. 2. Offer Should Have Minimum 3 Year Comprehensive Warranty Supported By Bank Guarantee ( 10% Of P.O Value Of The Main Equipment ) . 3. Should Quote Separately For 4 Years Comprehensive Annual Maintenance Contract After The Warranty Period. These Charges Shall Include All Costs Of Personnel And Spares. Any Exemption To Inclusion Like Consumables Should Be Specifically Mentioned In The Offer With Their Costs During The Camc Period. Camc Will Be Necessarily Included Minimum For 4 Preventive Visits And Any Number Of Breakdown Calls. 4. Should Be Able To Demonstrate The Model Offered When Called For By The Administration Before Finalization Of Tender And Installation Should Be At Free Of Cost. 5. The Instrument Should Be Previously Installed In Minimum Three Other Railway Hospitals / Government Institutions. 6. Inter-Se Position Of Offers Would Be Determined Based On The Sum Of Cost Of The Equipment, And Charges, If Any, Towards Consumables Offered In The Tender, During The Warranty Period. 7. After Sales Service Is Required At The Place Of Delivery. Details Of After-Sales Service Facilities Like Address, Telephone No, Fax No, Email Etc; Number Of Technicians, Engineers With Their Qualification, Inventory Of Spares For Repair And Number Of Equipment Serviced By The Centre Should Be Enclosed.

Refer document

Refer document

Refer document