Department Of Local Bodies has published Supply And Fixing Of Equipment For Open Gym At Different Location Of North Nagar Nigam .. Submission Date for this Tender is 09-07-2021. Gym Equipment Tenders in JODHPUR Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work: S&F of equipment for Open Gym at Different Location of North Nagar Nigam. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | Seated Puller\nDimension: - 1778mm (length) X 685 mm (width) X2280 mm (Height.)\nSafe Area: - 3Mtr. X 1.25 mtr.\nSeated puller equipment is made of form MS Pipe of different NB.NB stands for nominal bore sizes i.e. internal diameter of pipe in millimeters.\nThe Central main frame is made up of combination of F90mm x3mm thick & 100mm X 50mm MS PIPE and CR sheet (20”X12”) of 16 gauge for support & display.\nBottom frame is made up of F90mm X 3mm thick MS pipe.\nAll linkages, handle frame and seat frame are made up of F50 mm pipe of heavy gauge.\nThe seat frame is made up of (100mm X 50mm) MS pipe. In L & trapezium shape for support.\nTo build structure bushes are used which are made form M.S seamless pipe of 63mm O.D and 10mm thickness.\nThe bearing used are ball bearing 6205 zz permanent lubricated sealed bearing of reputed brand.\nThe main frame and the linkage are fixed on the 10mm thick plate, the bearing shaft of F25mm dia is fixed on the capsule hole on the ends and covered with 70mm & 10mm thick plate, this cover is designed in such a way that it should cover the outer portion of the shaft and fixed by the spring lock and the high tensile steel with galvanized bolts. Same on each every linkage joint.\nSeat and back rest provided are made up of CR MS sheet, the sheet is supported by the heavy gauge channel, the sheet has sheet has uniform border with no joints.\nHigh tensile steel with galvanized nuts and bolts are used for assembly.\nThe specialized powder coating of texture color in used. \nThe foundation used for fixing the one side of bottom frame is made from the combination of 6 rod and the 2 thick plate (228.6mm&8mm) the rod is 760mm long and 3/4" thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 6 rods are welded to together with support 35mm X 35mm MS Angle of 5mm thickness and the adjustment is done by the nuts. Same to be done on other side.\nThe cerclips used for assembly are of A24mm.\nAll the ends of the structure are closed and properly welded.\nOne end of seat frame is fixed with high tensile rubber. | BI01010001010000000000000515BI0100001113 | 15 | nos. |
| 2 | 1.02 | TRIPLE TWISTER\nDIMESNION: - 1980MM (LENTH) x 1980 mm (WIDTH) X 2080 mm (HEIGHT.)\nSAFE AREA: - 2.5Mtr. X 2.5 Mtr.\nTriple twister equipment is made from MS pipe of different NB for nominal bore sizes i.e. internal diameter of pipe in millimeters.\nThe Central main pipe is F115mm X 5mm thick MS pipe.\nThe bottom of central pipe is welded with support of MS round plate F225mm & 8mm thick. \nThe bottom of frame is made from 90mm X 3mm thick MS pipe each bottom frame are connected to central pipe with two half curved shaped MS flat(100mm X 203mm)\nThe handle frame is of 35 OD X3mm thick made form MS pipe in capsule shape.\nThere is hole of 25mm on base plate for the adjustment the level of the equipment.\nPins used of diameter. 35mm are made from SAE 8620 bright material there are two types of bearing used tapered bearing and ball bearing (6306 zz permanent lubricated sealed bearing) of reputed brand the whole console of pins is designed in lock and key and the special “TT” spring lock pattern is used so that the bearing and the plate console cannot be taken out there will be special spring lock between the bearing block for safety.\nHigh tensile steel with galvanized nuts and bolts are used for assembly.\nThe specialized powder coating of texture colour used.\nThe foundation used for fixing the central pole made from the combination of 3rod and the F225mm & 8mm thick M.S plate the rod is 760mm long and 3/4" thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these three rods are welded together with 35mm X 35mm MS Angle of 5mm thickness. \nThe top ends of the structure are closed and properly welded.\nThe twister plate are made from F350mm X6mm thick chakkar plate the border cover of plate is 50mm X6mm thick M.S flat and the base of the twister plate is welded with special pin console (F90mm &15mm thickness) and with the flat for support.\nThe bottom of the bottom frame is welded with support if T shaped “C” channel heavy gauge (76mm X 38mm) | BI01010001010000000000000515BI0100001114 | 15 | nos. |
| 3 | 1.03 | PARALLEL BAR DIPS\nDIMENSION:- 1700MM (LENGTH) X685 MM (WIDTH)1930 MM (HEIGHT)\nSAFE AREA: - 2 mtr. x 1 mtr.\nParallel bar dips equipment is made up from MS pipe of different NB. NB stands for nominal bore size i.e. internal diameter of pipe in millimeters.\nThe Central main frame is made up of combination of (F90mm X 3mm thick & 100 mmX50mm MS pipe and CR sheet (20X12) of 16 gauge for support and display.\nBottom frame is made up of (90mm X3mm) thick MS pipe 1676 mm long & 279 mm height.\nThe linkage handle for the parallel bar dips are made up to 50mm MS pipe of heavy gauge. Both the side handles are kept at different level so that everyone can use it at one end handle should be at 1041mm height from the base frame and other at 914mm height from the base frame.\nHigh tensile steel with galvanized nuts and bolts are used for assembly.\nThe specialized powder coating of texture colour is used.\nThe foundation used for fixing the one side of bottom frame is made form. the combination of 6 rod and the 2 thick plate (228.6mm&8mm) the rod is 760mm long and ¾” thick and at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 6 rods are welded together with support 35mmX35mm MS angle of 5mm thickness and the adjustment is done by the nuts. Same to be done on other side.\nAll the ends of the structure are closed and properly welded. | BI01010001010000000000000515BI0100001115 | 15 | nos. |
| 4 | 1.04 | ABDOMINAL BOARD\nDimension:- 1930mm (length) X 1778 mm (Width) X 1498 mm (Height)\nSafe Area:- 2.5 Mtr. X 2 Mtr.\nThe ABDOMINAL BORAD equipment is made from MS PIPE of different NB.NB stands for nominal bore sizes i.e internal diameters of pipe in millimeters.\nThe Central main frame in made up of combination of M.S pipe (F90mm X 3mm) thick & (100 mm X 50mm) and CR sheet (20"X12") of 16 gauge for support and display.\nThe frame of sit up board is having boundary of 25.4mm MS pipe and Capsule MS Pipe (63mm X25.4mm) placed horizontally though out the frame the sit up board is supported by (100mm X50mm) MS pipe.\nThe Remaining frame of sit up board is made up to combination of MS pipe (90 mm X 3mm thick) as pillars set up certain degree & (100mm X 50mm) MS pipe for supporting the main frame and the sit up board frame the leg support is made up of (F90mm X 533mm) MS pipe long are joint together by capsule pipe (65mm) ends of the leg support should be covered with ABS covering \nThe bottom of central frame is supported by MS round plate of F228.6mm & 8mm thick.\nThe foundation used for fixing the main frame is made from the combination of 6rod and the 2 thick plate (F228.6mm & 8mm) the rod is 760mm long and 3/4" thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 6 rods are welded together with support 35mm X 35mm MS angle of 5mm thickness and the adjustment is done by the nuts and the supported frame poles is fixed by four T shaped "C channel heavy gauge (76 mmx 38 mm), there are holes of 25 mm on base plate for the adjustment of level the equipment. \nHigh tensile steel with galvanized nuts and bolts are used for assembly.\nThe specialized powder coating of texture colour is used.\nAll the ends of the structure are closed and properly welded. | BI01010001010000000000000515BI0100001116 | 15 | nos. |
| 5 | 1.05 | LEG PRESS\nDimension:- 2220mm (Length) X 685 mm (width) x 2311mm (height)\nSafe Area:- 3.15 Mtr. X 1.5 Mtr.\nLeg press equipment is made from MS pipe of different NB. NB stands for nominal bore sizes i.e. internal diameter of pipe in millimeters.\nThe main frame is of F90mm X 3mm thick & 100mm X 50mm MS PIPE and CR sheet (20"X12") of 16 gauge for support & display\nThe bottom of central frame is welded a pair of support of MS round plate of 225mm &8mm thick.\nFor maintaining the posture the rubber handle is placed on the on the main sleeve frame on 25.4NB.\nThe sleeve frame is made up of 63.5NB, this sleeve can be disassembled from main frame the sleeve frame is supported by 63.5NB from top and 50.8 NB from mid.\nThere are holes of 25mm on base plate for the adjustment of level of the equipment.\nFoot rest in made up of combination of chakkar plate & flat (30.48mm)is welded on the border.\nThe foot rest (150mm X 350mm) is fixed on the MS frame of (100mmX50mm) the MS frame is made little tapered.\nThe bearing used are ball bearing 6205 permanent lubricated sealed bearing of reputed brand.\nThe pins used are made up of 25mm SAE 8620 bring material.\nTo build structure bushes are used which are made from MS seamless pipe of 80mm O.D and 10mm thickness\nSeat and back rest provided are made up of CR MS sheet the sheet is supported by the heavy gauge channel the sheet has uniform border with on joints.\nHigh tensile steel with galvanized nuts and bolts are used for assembly.\nThe specialized powder coating of texture colour is used.\nThe foundation used for fixing the main frame is made from the combination of 12 rod and the 4 thick plate (228.6mm X 8mm) the rod is 760 mm long and 3/4" thick & at the one end on the rod BSW threading is done for the adjustment of the level of the main frame these 12 rods are welded together with support 35mm X 35mm MS angle of 5mm thickness and the adjustment is done by the nuts. \nThe main frame and the sleeve are fixed on the 10mm thick plate the bearing shaft of 25mm dia is fixed on the capsule hole on the ends and covered with 70mm & 10mm thick plate this covered is designed in such a way that it should cover the outer portion of the shaft and fixed by the spring lock and the high tensile steel with galvanized bolts. \nAll the ends of the structure are closed and properly welded.\nOne end of sleeve frame is fixed with high tensile rubber.\nThe cerclips used for assembly are of A24mm.\n | BI01010001010000000000000515BI0100001117 | 15 | nos. |
| 6 | 2 | AIR WALKER\nDimension:- 2501mm (length)X76mm (Width)X2095mm (Height) \nSafe Area:- 2.5 mtr X 1.9 mtr.\nThe air equipment is made from MS PIPE of different NB. NB stands for nominal bore sizes. i.e. Internal diameter of pipe in mm. \nthe central main frame is made up of combination of dia F90 mm x 3mm thick & 100 mm x 50 mm MS pipe and CR sheet (20" x 12") of 16 gauge for support and display. The pillars of main frame are made up of dia 90 mm x 3 mm thick MS pipe.\nTo build structure bushes are used which are made from MS seamless pipe of 63 mm OD and 10 mm thickness.\nthe sleeve frame is made up of 63.5 NB , this sleeve can be disassembled from main frame, the sleeve is supported with flat & o 63 mm MS pipe from the top and at the other end foot rest is attached with two flat (254 mm x 63 mmm)\nThe MS pipe of dia 50 mm is bended in "c" from to attach the main frame and pillars.\nThe foot rest (152 mm x 368 mm) is fixed on the sleeve frame, foot rest is made up of combination of chakkar plate & flat (30.48 mm) is welded on border. \nThe main frame and pillars are attached with supporting pillars dia 50 mm MS pipe. For safety and supporting reasons. \nthe foundation used for fixing the main frame and the pillars is made from the combination of 12 rod and the 4 thick plate (dia 228.6 mm & 8 mm) the rod is 760mm long and 3/4" thick & at the one end of the rod BSW threading is done for adjustment of the level of the main frame, these 12 rods are welded together with support 35 mm x 35 mm MS angle of 5 mm thickness and adjustment is done by the nuts & the supporting pillars. \nThe foundation used for fixing the supporting pillars is fixed by four T shapes "C" channel heavy gauge (76 mm x 38 mm) and all the T shaped " C" channel are joined together with support 35 mm x 35 mm MS angle of 5 mm thickness. \nTo build structure bushes are used which are made from MS seamless pipe of 63 mm OD and 10 mm thickness.\nThe bearing used are ball bearing 6205 zz permanent lubricated sealed bearing of reputed brand.\nHigh tensile steel with galvanized nuts and bolts are used for assembly. The cerclips used for assembly are A24 mm.\nThe specialized powder coating of texture colour is used. All the ends of structure are closed and properly welded | BI01010001010000000000000515BI0100001118 | 15 | nos. |
| 7 | 3 | Cross walker\nDimension: - 1930 mm (length) x 990 mm (width) x 1778 (height). \nSafe area: - 2.5 mtr x 1.5 mtr.\nThe cross walker equipment is made from MS pipe of different NB. NB stands for nominal bore sizes. i.e. Internal diameter of pipe in millimeter. \nThe main frame is made up of combination F90mm x 3mm thick M.S pipe, 100mm x 50mm MS PIPE and CR sheet (20”x 12”) of 16 gauge for support and display & the Supporting frame is made up of combination 90mm x 3mm thick MS pipe & 100mm x 50mm MS PIPE, both the main frame and Supporting frame ar joined together through 100mm x 50mm MS PIPE. \nThe Handle frame is made up to F50mm M.S pipe & 35mm M.S pipe.\nTo build structure bushes are used which are made from M.S Seamless pipe of 63 O.D and 10mm thickness.\nThe linkage Frame consist of portion, Each portion is made up of combination M.S pipe (50mm square) and M.S flat (50mm x 5mm thick) on both the side and The foot rest (152mm x 368mm) is fixed on the both the ends of each portion, foot rest is made up combination of chakkar plate & flat (30.48mm) is welded on the border.\nThe linkage Frame and the handle are fixed on the 571mm x 6mm thick plate, the bearing shaft of 25mm dia is fixed on the capsule hole on the ends of thick plate and covered with 70mm & 10mm thick plate, this cover is designed in such a way that it should cover the outer portion of the shaft and fixed by the spring lock and the high tensile steel with galvanized bolts. Same on each every linkage joint.\nThe foundation used for fixing the frame and the pillars is made from the combination of 12 rod and the 4 thick plate (F228.6mm &8mm), the rod is 760 mm long and 3/4" thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame. These 12 rods are welded together with support 35mm x 35mm MS Angle of 5mm thickness and the adjustment is done by the nuts & the supporting pillars.\nThe foundation used for fixing the supporting pillars is fixed by four T shaped “C channel” heavy gauge (76mm x 38mm) and all the T shaped “C channel” are joined together with support 35mm x 35mm MS Angle of 5mm thickness.\nTo build structure bushes are used which are made from M.S Seamless pipe of 63mm O.D and 10mm thickness.\nThe bearing used are ball bearing 6205 zz permanent lubricated sealed bearing of reputed brand.\nHigh tensile steel with galvanized nuts and bolts are used for assembly. The cerclips used for assembly are of A24mm.\nThe specialized powder coating of texture colour is used. All the ends of the structure are closed and properly welded. | BI01010001010000000000000515BI0100001119 | 15 | nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
