}

Redevelopment Of Sector 6 And Sector 14 Market Under Smart City Mission, Karnal-Haryana

Smart City Development Corporation Limited has published Redevelopment Of Sector 6 And Sector 14 Market Under Smart City Mission. Submission Date for this Tender is 14-07-2021. Building Work Tenders in Karnal Haryana. Bidders can get complete Tender details and download the document.




Tender Notice

28346215
Redevelopment Of Sector 6 And Sector 14 Market Under Smart City Mission
Open Tender
Indian
Haryana
Karnal
14-07-2021

Tender Details

Redevelopment Of Sector 6 And Sector 14 Market Under Smart City Mission

Key Value

Document Fees
INR 15000 /-
EMD
INR 185000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Redevelopment of Sector 6 and Sector 14 Market under Smart City Mission
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Sector 6 market BI01010001010000000000000515BI0100001112
2 1.01 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead 757.33 Sqm
3 1.02 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 12.5 cum
4 1.03 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1: 1.5:3 or richer mix (i/cequivalent design mix) 17.05 cum
5 1.04 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-in-charge. 3.413 Cum
6 1.05 Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead up to 1000 metres, as per technical clause 202 of MORT&H specifications 145.33 Cum
7 1.06 Disposal of building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 75.73 cum
8 1.07 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. 428.45 cum
9 1.08 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level:1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded\nstone aggregate 40 mm nominal size) 41.6 Cum
10 1.09 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 1019.11 sqm
11 1.1 Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement: 6 coarse sand) 104.53 Cum
12 1.11 Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in :Cement mortar 1:6 (1 cement: 6 coarse sand) 99.37 Cum
13 1.12 (CEMENT PLASTER (IN COARSE SAND)12 mm cement plaster of mix :1 :4 (1 cement: 4 coarse sand) 213.81 sqm
14 1.13 Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work 606.55 sqm
15 1.14 cement concrete 1 :2:4 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1 :3 on exposed surface including from work, placing and fixing in position, complete at the ground level or in first storey 19.64 Cum
16 1.15 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 606.55 Sqm
17 1.16 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Enaineer-in-CharQe. 254.91 Sqm
18 1.17 Providing and fixing granite stone in all shades 15mm to 18 mm thick in skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1 :3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc. 280.72 Sqm
19 1.18 Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 88 Sqm
20 1.19 Painting the wooden,metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work 88 Sqm
21 1.2 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising \nglass beads @ 250 gms per sqm area,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. 157.5 sqm
22 1.21 Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS: 164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control Up to 10 cm in width 156.84 sqm
23 1.22 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement: 3 coarse sand (zone-Ill): 6 graded stone aggregate 20 mm nominal size), including necessary excavation of size\n250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. 19 each
24 1.23 Trenching in all kinds of soil up to a depth of 60 cm cum 51 including removal and stacking of serviceable MATERIALs and then disposing of by spreading and neatly levelling with in a lead of 50 metres and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/an farm-yard manure before and after flooding trench with water (excluding cost of imported earth and sludge or farm-yard manure) 644.42 cum
25 1.24 Supplying at site of work well-decayed farm-yard manure from any available source, approved by the Engineer-incharge including screening through sieve of LS.designation 16 mm with 5 km lead and supply of good earth making mixture in ratio of 1 :2 80.55 cum
26 1.25 Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately)Hole 1.2 metre dia and 1.2 metre deep 9 No.s
27 1.26 Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately)Holes 90 cm dia, and 90 cm deep 10 No.s
28 1.27 Supplying and stacking of good quality top layer garden earth free from debris and weeds, at site including royalty and carriage/lead 5km (good earth measured in stacks will be reduced by 20 % for payment) only for filling of pots and flower beds . 100 cum
29 1.28 Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in 35 cm HDPE bags as per direction of the officer-in-charge. 4 No.s
30 1.29 Providing and stacking of Plumeria Rubra of height 120-150 cm. with 3-4 branches and thick stem in 35 cm HDPE bags as per direction of the officer-in-charge. 4 No.s
31 1.3 Providing and stacking of Lagerstroemia flosreginae of height 150-165 cm in big poly bag \nof size 25 cm as per direction of the officer-in-charge. 4 No.s
32 1.31 Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge. 4 No.s
33 1.32 Providing and stacking of Jacaranda mimosifolia of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 4 No.s
34 1.33 Providing and stacking of Erythrina indica of height 150-165 cm. in big Polybag of size 25 cm as per direction of the officer-in-charge. 4 No.s
35 1.34 Providing and stacking of Mimusops elengi (Maulsri) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. 4 No.s
36 1.35 Providing and stacking of Chorisia speciosa of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 4 No.s
37 1.36 Providing and stacking of Foxtail palm of ht. 180-21 O cm bottom girth 15-20 cm well developed in big size HDPE bags as per direction of the officer-in-charge. 12 No.s
38 1.37 Providing and displaying of Seaforthia Palm plant, having ht. 1.20 cm to 1.50 cm with 8-10 suckers, well developed, fresh and healthy lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. 12 No.s
39 1.38 Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge. 57 No.s
40 1.39 Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pots of size 15 cm as per direction of the officer-in-charge. 57 No.s
41 1.4 Providing and stacking of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage each 39 in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge. 57 No.s
42 1.41 Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Polybag of size 20 cm as per direction of the officer-in-charge. 57 No.s
43 1.42 Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8 branches in poly\nbags of size 25 cm as per direction of the officer-in-charge. 227 No.s
44 1.43 Providing and stacking of Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 15 cm as per direction of the officer-in-charge. 227 No.s
45 1.44 Providing and stacking of Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bags of size 25 cm as per direction of the officer-in-charge 227 No.s
46 1.45 Providing and stacking of Plumbego capensis well developed with fresh and healthy 30 to 45 cm ht., with bloom in 20 cm Polybag as per direction of the officer-in-charge. 227 No.s
47 1.46 Providing and stacking of Tabernaemontana coronaria (Chandni single) of height 45-60 cm \nin Polybag of size 20 cm as per direction of the officer-in-charge. 227 No.s
48 1.47 Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 20 cm size of Earthen Pot/ Plastic Pot & as per direction of the officer-in-charge. 509 No.s
49 1.48 Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched \nin 15 cm size of Earthen Pot/ Plastic Pot & as per direction of the officer-in-charge. 509 No.s
50 1.49 Providing and stacking of Cuphea chinensis of ht. 20-30 cm full of branches and healthy each 26 \nfoliage in 15 cm size of Polybag & as per direction of the officer-in-charge. 509 No.s
51 1.5 Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushy shape with fresh and healthy leaves in 20 cm size of Polybag & as per direction of the officer-In- charge. 509 No.s
52 1.51 Providing and stacking of Ophiopogon, Green/Black full of leaves in 10 cm size of Earthen \nPot/ Plastic Pot & as per direction of the officer-in-charge 509 No.s
53 1.52 Providing and stacking of Setcreasea purpurea full of variegated leaves in 15 cm size of \nEarthen Pot/Plastic Pot as per direction of the officer-in-charge. 509 No.s
54 1.53 Providing and stacking of Syngonium golden of height 30-45 cm. with 2-3 suckers healthy \nfoliage in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge. 509 No.s
55 1.54 Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot / \nPlastic Pot & as per direction of the officer-in-charge. 509 No.s
56 1.55 Providing and stacking of Wedelia trilobata, full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge 509 No.s
57 1.56 Providing and stacking of Schefflera green, having 3 to 4 branch, ht. 30 to 45 cm well developed with fresh & healthy in 15 cm size of Earthen Pot/Plastic Pot as per direction of the officer-in- charge. 509 No.s
58 1.57 Laying of underground cable 0.75 metre below ground level covered without sand and bricks including excavation and refilling of trenches.:-Note: additional cable in same trench : 50% of Main cable cost 16 Sq mm to 35 sqmm 2 to 4 Core 200 meter
59 1.58 Laying of underground cable 0.75 metre below ground level covered without sand and bricks including excavation and refilling of trenches.:-Note: additional cable in same trench : 50% of Main cable cost 50 Sq mm to 150 sqmm 2 to 4 Core 75 meter
60 1.59 Supply and erection of suitable compression type brass cable glands for underground Cable :-25 sqmm to 50 sqmm Cable 2 to 4 Core 10 set
61 1.6 Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work . 50sqmm 8 each
62 1.61 Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work . 35sqmm 16 each
63 1.62 Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work .16sqmm 10 each
64 1.63 Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S. Rod welded/riveted at the top with 10 cm dia 3 mm thick MS plate inscribed with 'cable' word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level. 10 each
65 1.64 Supply, installation, testing and commissioning of 12.5 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard\naccessories supplied by the manufacturer with 3 nos. steel wirerope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-Charge Thickness of Top and Bottom Section = 3 mm (minimum) Top Dia= 150 mm and Bottom Dia= 360mm Thickness of Galvanization - Top = 65 micron (minimum) and\nBottom = 85 micron (minimum) 3 each
66 1.65 Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 12.5 m high mast pole 3 each
67 1.66 Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 1 O A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1 :5: 1 O of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 9 Metre Long pole with top dia 100 mm and bottom 200 mm with base plate of size 350 x 350 x 20 mm. 2 each
68 1.67 Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. 6 each
69 1.68 Earthing: Extra for using salt and charcoal / coke for pipe earth electrode as required. 6 each
70 1.69 Earthing:Supply and laying of 25x6mm GI strip at 0.5meter below ground as strip each electrode including soldering as required. 30 each
71 1.7 Earthing: Supply and laying of 6SWG GI wire at 0.5m below ground level as strip earth electrode including thimbles soldering etc as required. 30 meter
72 1.71 S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HOPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 50/40 mm outer dial inner dia 275 meter
73 1.72 Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)3.5C x 50sqmm Al Ar cable 75 meter
74 1.73 Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)3.5C x 35sqmm Al Ar cable 150 meter
75 1.74 Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)4C x 16sqmm Al Ar cable 50 meter
76 1.75 Supplying and erecting Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise/lower push buttons complete.(Should be supplied by same Highmast manufacturer) 3 No.s
77 1.76 Providing and fixing 4 arm lantern carriage suitable for 9mtr height octagonal street light column holding 4nos 250W flood lights 2 No.s
78 1.77 Supply and Installation of 250W LED flood light luminaire to be mounted on 20m Highmast, LED luminaire having Epoxy powder coated pressure die-cast aluminium housing,Weatherproof gaskets should be provided for LEDs and control gear compartments.Luinaire should be suitable for Side entry mounting for max. 38mm OD pipe bracket.The LED driver acces should be from top for easy maintenance.LEDs should be provided with non-yellowing modular secondary lens optics.LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level)>=120lumens/watt, Minimum system Lumens 5400 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 5665K ±355K, CRI>=70, PF>=0.9, THD<10%, and Operating Temperature Range-5 deg C to +45deg C, IP66. Built in Surge Protection of 4KV & external surge protection of 10kVand an operating Voltage Range of 140 to 270V AC,50Hz.Luminaire Weight should not exceed 1.5kg.The driver used is specially designed to have built-in surge voltage, open/short circuit protections.The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Similar to Bajaj Cat. Ref BJFL 200W LED WHITE.\nLUMINAIRE MAKE : Phillips / Bajaj / Surya /Keselec.\nLED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM. 26 No.s
79 2 Sector 14 market BI01010001010000000000000515BI0100001124
80 2.01 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead 135.55 Sqm
81 2.02 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1: 1.5:3 or richer mix (i/cequivalent design mix) 7.39 cum
82 2.03 Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead up to 1000 metres, as per technical clause 202 of MORT&H specifications 1269 Cum
83 2.04 Disposal of building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 8.13 cum
84 2.05 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. 174.5 cum
85 2.06 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level:1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded\nstone aggregate 40 mm nominal size) 115.4 Cum
86 2.07 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 844.75 sqm
87 2.08 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 408.09 kg
88 2.09 Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement: 6 coarse sand) 33.93 Cum
89 2.1 Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in :Cement mortar 1:6 (1 cement: 6 coarse sand) 35.24 Cum
90 2.11 (CEMENT PLASTER (IN COARSE SAND)12 mm cement plaster of mix :1 :4 (1 cement: 4 coarse sand) 213.81 sqm
91 2.12 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 litre/1 O sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 499.05 sqm
92 2.13 cement concrete 1 :2:4 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1 :3 on exposed surface including from work, placing and fixing in position, complete at the ground level or in first storey 39.68 Cum
93 2.14 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Enaineer-in-CharQe. 78.3 Sqm
94 2.15 Providing and fixing granite stone in all shades 15mm to 18 mm thick in skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1 :3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc. 90.88 Sqm
95 2.16 Applying priming coat:With ready mixed red oxide zinc chromate primer of approved\nbrand and manufacture on steel galvanised iron/ steel works 15.1 Sqm
96 2.17 Painting the wooden,metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work 15.1 Sqm
97 2.18 Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS: 164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control Up to 10 cm in width 23.19 sqm
98 2.19 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement: 3 coarse sand (zone-Ill): 6 graded stone aggregate 20 mm nominal size), including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. 159 each
99 2.2 Trenching in all kinds of soil up to a depth of 60 cm cum 51 including removal and stacking of serviceable MATERIALs and then disposing of by spreading and neatly levelling with in a lead of 50 metres and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/an farm-yard manure before and after flooding trench with water (excluding cost of imported earth and sludge or farm-yard manure) 192.9 cum
100 2.21 Supplying at site of work well-decayed farm-yard manure from any available source, approved by the Engineer-incharge including screening through sieve of LS.designation 16 mm with 5 km lead and supply of good earth making mixture in ratio of 1 :2 24.12 cum
101 2.22 Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately)Hole 1.2 metre dia and 1.2 metre deep 9 no.s
102 2.23 Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately)Holes 90 cm dia, and 90 cm deep 10 no.s
103 2.24 Supplying and stacking of good quality top layer garden earth free from debris and weeds, at site including royalty and carriage/lead 5km (good earth measured in stacks will be reduced by 20 % for payment) only for filling of pots and flower beds . 100 Cum
104 2.25 Grassing with 'Doob' /selection grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed-and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed- in rows 15 cm apart in either direction 46.16 cum
105 2.26 Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in 35 cm HDPE bags as per direction of the officer-in-charge. 1 no.
106 2.27 Providing and stacking of Plumeria Rubra of height 120-150 cm. with 3-4 branches and thick stem in 35 cm HDPE bags as per direction of the officer-in-charge. 1 no.
107 2.28 Providing and stacking of Lagerstroemia flosreginae of height 150-165 cm in big poly bag \nof size 25 cm as per direction of the officer-in-charge. 1 no.
108 2.29 Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge. 2 no.
109 2.3 Providing and stacking of Jacaranda mimosifolia of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 1 no.
110 2.31 Providing and stacking of Erythrina indica of height 150-165 cm. in big Polybag of size 25 cm as per direction of the officer-in-charge. 1 no.
111 2.32 Providing and stacking of Mimusops elengi (Maulsri) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. 1 no.
112 2.33 Providing and stacking of Chorisia speciosa of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 2 no.
113 2.34 Providing and stacking of Foxtail palm of ht. 180-21 O cm bottom girth 15-20 cm well developed in big size HDPE bags as per direction of the officer-in-charge. 1 no.
114 2.35 Providing and displaying of Seaforthia Palm plant, having ht. 1.20 cm to 1.50 cm with 8-10 suckers, well developed, fresh and healthy lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. 3 no.
115 2.36 Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge. 17 no.
116 2.37 Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pots of size 15 cm as per direction of the officer-in-charge. 17 no.
117 2.38 Providing and stacking of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage each 39 in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge. 17 no.
118 2.39 Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Polybag of size 20 cm as per direction of the officer-in-charge. 17 no.
119 2.4 Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8 branches in poly\nbags of size 25 cm as per direction of the officer-in-charge. 65 no.
120 2.41 Providing and stacking of Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in\nearthen pots of size 15 cm as per direction of the officer-in-charge. 65 no.
121 2.42 Providing and stacking of Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bags of size 25 cm as per direction of the officer-in-charge 65 no.
122 2.43 Providing and stacking of Plumbego capensis well developed with fresh and healthy 30 to \n45 cm ht., with bloom in 20 cm Polybag as per direction of the officer-in-charge. 65 no.
123 2.44 Providing and stacking of Tabernaemontana coronaria (Chandni single) of height 45-60 cm in Polybag of size 20 cm as per direction of the officer-in-charge. 65 no.
124 2.45 Providing and stacking of Altemanthera species of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Polybag & as per direction of the officer-in- charge. 142 no.
125 2.46 Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in 15 cm size of Earthen Pot/ Plastic Pot & as per direction of the officer-in-charge. 142 no.
126 2.47 Providing and stacking of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Polybag & as per direction of the officer-in-charge. 142 no.
127 2.48 Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushy shape with fresh and healthy leaves in 20 cm size of Polybag & as per direction of the officer-In- charge. 142 no.
128 2.49 Providing and stacking of Ophiopogon, Green/Black full of leaves in 10 cm size of Earthen Pot/ Plastic Pot & as per direction of the officer-in-charge 142 no.
129 2.5 Providing and stacking of Setcreasea purpurea full of variegated leaves in 15 cm size of \nEarthen Pot/Plastic Pot as per direction of the officer-in-charge. 142.65 no.
130 2.51 Providing and stacking of Syngonium golden of height 30-45 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge. 142 no.
131 2.52 Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. 142 no.
132 2.53 Providing and stacking of Wedelia trilobata, full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge 142 no.
133 2.54 Providing and stacking of Schefflera green, having 3 to 4 branch, ht. 30 to 45 cm well\ndeveloped with fresh & healthy in 15 cm size of Earthen Pot/Plastic Pot as per direction of the officer-in- charge. 137 no.
134 2.55 Set stone pavement using cobble stone driveway ramp :- this is semi grid type of pavement. Stone is set over the layer of lean concrete and crushed stone base. The sub-base should be non frost sussceptible material. Cobble granite stone 75*75 or 90*90 or 100*100 . Stone sets used in any area shall be uniform size. They shall hammer dressed on top to the extent that maximum depression of dressed surface with protected edge. There drerssing on the sides shall be simimilarly carried out.100mm cobbled stone all joints filled with pcc and bedded on 100mm thick pcc on hardcore and compacted earth 22.87 sqm
135 2.56 Laying of underground cable 0.75 metre below ground level covered without sand and bricks including excavation and refilling of trenches.:-\nNote: additional cable in same trench : 50% of Main cable cost 16 Sq mm to 35 sqmm 2 to 4 Core 150 meter
136 2.57 Supply and erection of suitable compression type brass cable glands for underground Cable :-25 sqmm to 50 sqmm Cable 2 to 4 Core 4 set
137 2.58 Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work . 25sqmm 16 each
138 2.59 Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S. Rod welded/riveted at the top with 10 cm dia 3 mm thick MS plate inscribed with 'cable' word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level. 5 each
139 2.6 Supply, installation, testing and commissioning of 12.5 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard\naccessories supplied by the manufacturer with 3 nos. steel wirerope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-Charge Thickness of Top and Bottom Section = 3 mm (minimum)\nTop Dia= 150 mm and Bottom Dia= 360mm\nThickness of Galvanization - Top = 65 micron (minimum) and\nBottom = 85 micron (minimum) 2 each
140 2.61 Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 12.5 m high mast pole 2 no.
141 2.62 Earthing:Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. 4 each
142 2.63 Earthing:Extra for using salt and charcoal / coke for pipe earth electrode as required. 4 each
143 2.64 Earthing:Supply and laying of 25x6mm GI strip at 0.5meter below ground as strip each electrode including soldering as required. 20 each
144 2.65 Earthing:Supply and laying of 6SWG GI wire at 0.5m below ground level as strip earth electrode including thimbles soldering etc as required. 20 meter
145 2.66 Earthing:S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HOPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 50/40 mm outer dial inner dia 130 meter
146 2.67 Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)4C x 25sqmm Al Ar cable 150 meter
147 2.68 Supplying and erecting Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise/lower push buttons complete.(Should be supplied by same Highmast manufacturer) 2 nos
148 2.69 Supply and Installation of 250W LED flood light luminaire to be mounted on 20m Highmast, LED luminaire having Epoxy powder coated pressure die-cast aluminium housing,Weatherproof gaskets should be provided for LEDs and control gear compartments.Luinaire should be suitable for Side entry mounting for max. 38mm OD pipe bracket.The LED driver acces should be from top for easy maintenance.LEDs should be provided with non-yellowing modular secondary lens optics.LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level)>=120lumens/watt, Minimum system Lumens 5400 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 5665K ±355K, CRI>=70, PF>=0.9, THD<10%, and Operating Temperature Range-5 deg C to +45deg C, IP66. Built in Surge Protection of 4KV & external surge protection of 10kVand an operating Voltage Range of 140 to 270V AC,50Hz.Luminaire Weight should not exceed 1.5kg.The driver used is specially designed to have built-in surge voltage, open/short circuit protections.The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Similar to Bajaj Cat. Ref BJFL 200W LED WHITE.\nLUMINAIRE MAKE : Phillips / Bajaj / Surya /Keselec.\nLED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM. 12 nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail