Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-07-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-07-2021 |
| 2 | 08-07-2021 | CHANGE IN DATES | Date | 19-07-2021 |
| 3 | 07-07-2021 | CHANGE IN BOQ | BOQ | 15-07-2021 |
| Name of Work : SPECIAL REPAIRS / UPGRADATION TO BUILDING NO. P-51H (H BLOCK) AND BUILDING NO. P-110S (S BLOCK) IN PHASE-II RESIDENTIAL AREA UNDER SPECIAL REPAIRS B/R AT NAVAL STATION BHEEMUNIPATNAM, PROVISIONING OF LED BOLLARD LIGHT NEAR LCA AT INS KALINGA AND PROVISION OF FALSE CEILING, PARTITION & ELECTRICAL APPLIANCES IN PARACHUTE STOWAGE/ MAINTENANCE/ PACKING STORE NEAR COVERED WORKUP STATION AT INS KARNA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down chowkhats or frames with shutters (with out taking off shutter from frame) not.exc 1.5 sq. m each complete all as specified and directed. | 40 | Each | |
| 2 | 2 | Taking down chowkhats or frames with shutters (with out taking off shutter from frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed. | 36 | Each | |
| 3 | 3 | Taking down and refixing shutters exc 1 sqm but n.exc 2 sqm each of any description complete all as specified and as directed. | 12 | Each | |
| 4 | 4 | Taking down shutters exc 1 sqm but n.exc 2 sqm each of any description complete all as specified and as directed. | 16 | Each | |
| 5 | 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge. | 706 | Sq.m. | |
| 6 | 6 | Demolition of reinforced cement concrete in roof, floor (other than ground floor) beams, staircase, chajja and similar suspended works (reinforcement cut as required to facilitate demolition) complete all as specified and as directed. | 3.6 | Cum | |
| 7 | 7 | M & L for second class Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. | 0.36 | Cum | |
| 8 | 8 | S&F Flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed. | 16 | Sqm | |
| 9 | 9 | M & L for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and as directed. | 14 | Sqm | |
| 10 | 10 | M&L preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed by the Engineer-in-Charge. | 45 | Sq.m. | |
| 11 | 11 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame covered with heat moulded wood grain printed PVC sheet (used instead of Plain colour PVC sheet) with 5mm thickx15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm (90O) used instead of exposed portion of PVC sheet beading, panelling of wood grain printed PVC sheet to fit in the mild frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge. | 24 | Sq.m. | |
| 12 | 12 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with mild steel square tube in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge. | 78 | Rm | |
| 13 | 13 | S&F 125 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed by the Engineer-in-Charge. | 96 | Each | |
| 14 | 14 | S&F 200mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge. | 64 | Each | |
| 15 | 15 | S&F 150mm long extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge. | 64 | Each | |
| 16 | 16 | S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by the Engineer-in-Charge. | 16 | Each | |
| 17 | 17 | M&L for anodised powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge. | 580 | Kg | |
| 18 | 18 | S&F anodised powder coated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and suitable anodised aluminium handles (1 No.) and rollers complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge. | 380 | Kg | |
| 19 | 19 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 Sq.m. in each pane complete all as specified and as directed by the Engineer-in-Charge. | 58 | Sq.m. | |
| 20 | 20 | S&F of aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. | 30 | Sqm | |
| 21 | 21 | S&F powder coated anodised coloured aluminium grill/ decogrill for windows, ventilators complete all as specified and as directed by the Engineer-in-Charge. | 160 | kg | |
| 22 | 22 | M&L for providing and injecting along the external wall below concrete or masonry apron using chemical emulsion @2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and as directed. | 100 | RM | |
| 23 | 23 | M&L for post construction anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia. holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed by the Engineer-in-Charge. | 172 | Sqm | |
| 24 | 24 | M&L for 25mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in sub base for flooring complete all as specified and as directed by the Engineer- in-Charge. | 364 | Sq.m. | |
| 25 | 25 | M&L for non skid ceramic coloured joint free tiles of size 400 x 400 x 6-7 mm thick as in floors etc. set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by the Engineer-in-Charge. | 344 | Sq.m. | |
| 26 | 26 | M&L for non skid ceramic coloured joint free tiles of size 400 x 400 x 6-7 mm thick as in vertical surface like skirtings dado etc. set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over backing coat of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by the Engineer-in-Charge. | 46 | Sq.m. | |
| 27 | 27 | S&F glazed ceramic coloured tiles in vertical surface 300 x 450 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over rendering 10mm thick in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge. | 266 | Sq.m. | |
| 28 | 28 | M&L machine cut kota stone slab 18 to 20mm thick as in floor laid over cement screed bedding and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10 mm thick rendering in CM 1:4 complete all as specified and as directed. | 30 | Sqm | |
| 29 | 29 | M&L machine cut polished kota stone slab 20-25 mm thick as in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing complete all as specified. | 10 | Sq.m. | |
| 30 | 30 | M & L for rounding edges of stone slab, such as in steps, cooking platform and other similar situation complete all as specified and as directed. | 80 | Rm | |
| 31 | 31 | S & F stainless steel pipe 25mm dia Curtain rod for windows, doors opening etc complete all as specified and as directed. | 120 | RM | |
| 32 | 32 | S & F Fancy type chromium plated knobs for fixing curtain rod complete all as specified and as directed. | 106 | Pair | |
| 33 | 33 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 20mm thick in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge. | 10 | Sq.m. | |
| 34 | 34 | S&F in repairs 32mm dia gun metal globe gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. | 8 | Each | |
| 35 | 35 | S&F PVC (SWR) pipes 110mm dia. single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge. | 40 | Rm | |
| 36 | 36 | S&F PVC (SWR) pipes 75mm dia. single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge. | 8 | Rm | |
| 37 | 37 | S&F PVC (SWR) vent cowls 110mm dia. complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 38 | 38 | S&F PVC (SWR) vent cowls 75mm dia. complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 39 | 39 | S&F 75mm dia. PVC (SWR) plain bends any radius complete all as specified and directed by the Engineer-in-Charge. | 8 | Each | |
| 40 | 40 | S&F 110mm dia. PVC (SWR) plain bends any radius complete all as specified and directed by the Engineer-in-Charge. | 8 | Each | |
| 41 | 41 | S & F 110 mm dia PVC (SWR) double 'Y' branch piece junction , single equal or unequal complete all as specified and as directed. | 4 | Each | |
| 42 | 42 | M&L for preparation of old plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed by the Engineer-in-Charge. | 520 | Sq.m. | |
| 43 | 43 | M&L for complete removal of existing treatment on internal walls and applying two coats of oil bound distemper over wall care putty of 2 mm thick complete all as specified and as directed by the Engineer-in-Charge. | 1260 | Sqm | |
| 44 | 44 | S&F in repair bib taps 15mm dia. fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by the Engineer-in-Charge. | 24 | Each | |
| 45 | 45 | S&F in repair two way bib cock 15mm dia. chromium plated, fancy type complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 46 | 46 | S&F in repairs, 15mm dia. chromium plated pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 47 | 47 | S&F in repairs, 15mm dia. chromium plated stop valves, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge. | 24 | Each | |
| 48 | 48 | S&F Health faucet 15mm dia. with one meter long easy flex tube in chromium finish and wall hook complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 49 | 49 | S&F in repairs, tubular towel rail stainless steel, 20mm dia., 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 50 | 50 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by the Engineer-in-Charge. | 8 | Each | |
| 51 | 51 | S&F wash hand basin of size 550x400 vitreous China (flat back or angle back type) including half pedestal and cutting for and pinning in ends of brackets or erecting stand including supply and fixing of waste coupling, waste pipe etc. complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 52 | 52 | S&F in repairs vitreous china wash down water closet of \"Orissa\" pattern size 580 x440mm white with integral foot rests including connection to trap and to flushing pipe anti syphonage pipe etc complete and making good to floor all as specified and directed. | 8 | Each | |
| 53 | 53 | S&F in repairs, 10 Litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32mm dia. and connection to pipes and fixed complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 54 | 54 | S&F soap dish, chromium plated brass, of approximate size 160x160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 55 | 55 | S&F in repairs, 125mm dia. chromium plated brass shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 56 | 56 | S&F in repair PVC flexible connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by the Engineer-in-Charge. | 16 | Each | |
| 57 | 57 | S&F PVC (SWR) multi floor trap 125mm dia. outlet with grating including jointing with solvent cement complete all as specified and directed by the Engineer-in-Charge. | 24 | Each | |
| 58 | 58 | M&L for stainless steel chromium plated plate rack of size 600 mm x 750 mm made by 1 mm thick sheet all as approved by GE | 8 | Each | |
| 59 | 59 | M&L for PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in shelves, chajja setting complete all as specified and as directed by the Engineer-in-Charge. | 2 | Cu.m. | |
| 60 | 60 | M & L for TMT steel bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. | 50 | Kg | |
| 61 | 61 | Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc built in cement mortar complete all as specified and as directed by the Engineer-in-Charge. | 385 | Sq.m. | |
| 62 | 62 | M&L for rendering 15mm thick with CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. | 190 | Sq.m. | |
| 63 | 63 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer and over a coat of wall care putty of 2 mm thick complete all as specified and directed. | 190 | Sqm | |
| 64 | 64 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound in 5 mm thick outer layer as per manufacturer's instructions finishing the surface even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.\nNote: WPC will be measured and paid separately | 60 | Sq.m. | |
| 65 | 65 | M&L for preparation of new plastered surfaces of walls and applying two coats of weather proof exterior emulsion over one coat of primer complete all as specified and as directed by the Engineer-in-Charge. | 60 | Sqm | |
| 66 | 66 | M&L for preparation of old plastered surfaces of walls and applying one coat of weather proof exterior emulsion paint complete all as specified and as directed by the Engineer-in-Charge. | 40 | Sqm | |
| 67 | 67 | M&L for rendering 10mm thick on fair faces of concrete surfaces of ceilings in CM 1:4 and finished even and fair with out using extra cement complete all as specified and directed by the Engineer-in-Charge. | 35 | Sq.m. | |
| 68 | 68 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and as directed by the Engineer-in-Charge. | 20 | Sq.m. | |
| 69 | 69 | S&F PVC flexible connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by the Engineer-in-Charge. | 32 | Each | |
| 70 | 70 | Labour for making hole in marble/ granite slab of cooking for cooking gas pipe etc by means of drilling machine n.exc 25 mm dia complete all as specified and as directed. | 8 | Each | |
| 71 | 71 | S&F hasp and staple aluminium anodized including bolt to hinge plate and fixed with screws 100 mm long complete all as specified and as directed. | 16 | Each | |
| 72 | 72 | Taking up or down 15mm dia. steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed by the Engineer-in-Charge. | 56 | Rm | |
| 73 | 73 | Taking up or down 20mm dia. steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed by the Engineer-in-Charge. | 117 | Rm | |
| 74 | 74 | S&F in repair 500 Litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) two layered ISI marked hoisted and fixed in position complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 75 | 75 | S&F in repair concealed type CP with long cup and shank stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 76 | 76 | S&F 20 mm bore ball valve high, pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed. | 8 | Each | |
| 77 | 77 | S&F 32mm dia gun metal globe gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. | 16 | Each | |
| 78 | 78 | Taking down old tarfelt treatment from roof surfaces including plaster etc complete all as specified and as directed. | 216 | Sqm | |
| 79 | 79 | M&L for cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and as directed. | 20 | Rm | |
| 80 | 80 | M & L rendering 10mm thick on roof padding in cement mortar 1:3 finished even and fair with using water proofing compound complete all as specified and as directed.\nNote: WPC will be measured and paid separately | 216 | Sqm | |
| 81 | 81 | Supply only Integral Water Proofing Compound (ISI marked) of approved make complete all as specified and as directed. | 56 | Kg | |
| 82 | 82 | M&L for APP based polymeric membrane minimum weighing 3 Kg/Sq.m. and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/Sq.m.) laid on primed surface after applying a coat of blown bitumen 85/25 grade @ 1.20 Kg/Sq.m. over bitumen primer @ 0.50 Kg per Sq.m. by forced application, applying another coat of hot blown bitumen 85/25 grade @ 1.20 Kg per Sq.m. over water proofing membrane and applying a coat of solar reflective bituminous aluminium paint @ 0.10 Kg per Sq.m. all as per the manufacturers instructions, complete all as specified and directed by the Engineer-in-Charge. | 216 | Sq.m. | |
| 83 | 83 | S & F in repairs 1mm thick stainless steel kitchen sink with drainage board of 915mm x 460mm over all size and 410 x 330 x 160 mm bowl size with plugs wastes and washers including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and as directed | 8 | Each | |
| 84 | 84 | M&L 18 mm thick prelaminated MDF board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard complete all as specified and as directed. | 36 | Sqm | |
| 85 | 85 | S&F Continuous (Piano) hinges mild steel, bright finish or electro galvanised with width of flap 30mm when opened complete all as directed. | 48 | RM | |
| 86 | 86 | M & L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel Paint over a coat of pink primer complete all as specified and directed. | 80 | Sqm | |
| 87 | 87 | M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection/ sub base and paving finished cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed. | 140 | Sqm | |
| 88 | 88 | S&F three layer PP-R (Polypropylene random copolymer) pipes of outer dia 32 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.\n | 66 | RM | |
| 89 | 89 | S&F three layer PP-R (Polypropylene random copolymer) pipes of outer dia 25 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.\n | 82 | RM | |
| 90 | 90 | S&F three layer PP-R (Polypropylene random copolymer) pipes of outer dia 20 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.\n | 25 | RM | |
| 91 | 91 | S&F anodised aluminium snap grid frame work of size 605 mm x 605 mm for false ceiling complete all as specified and as directed | 300 | Sq.m. | |
| 92 | 92 | M & L 4mm thick non asbestos fibre cement building board fixed to timber/GI/Aluminium frame work with screws in ceiling complete all as specified and as directed. | 300 | Sq.m. | |
| 93 | 93 | S&F hangers 6mm dia GI (upto 1200mm length) adjoining level fixed in roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed. | 300 | Sq.m. | |
| 94 | 94 | M&L for rendering 10 mm thick with CM 1:6 on internal plastered surfaces of fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. | 90 | Sq.m. | |
| 95 | 95 | M&L for complete removal of existing treatment of walls and applying two coat of plastic emulsion over a coat of primer including 3mm thick wall care putty complete all as specified and as directed by the Engineer-in-Charge. | 90 | Sq.m. | |
| 96 | 96 | M&L for forming mortice holes, exc 50 cu cm but n exc. 1000 cu cm for balusters, newels, post etc. and grouting with cement mortar 1:2 after\nbalusters, etc. are fixing complete all as specified and as directed. | 8 | Each | |
| 97 | 97 | M&L 18 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and as directed. | 14 | Sqm | |
| 98 | 98 | S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 Sq.m. in each pane complete all as specified and as directed by the Engineer-in-Charge. | 15 | Sq.m. | |
| 99 | 99 | S&F aluminium extruded section door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width complete all as specified and as directed. | 1 | Each | |
| 100 | 100 | S & F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, hinges anodised aluminium snap beading, screws etc (thickness of powder coating not less than 50 micron) complete all as specified and as directed.\n | 18 | Sqm | |
| 101 | 101 | S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including gusset plate, including erection of vertical supports for holding purlins, rafters, base plates, nuts & bolts etc. complete all as specified and as directed. | 95 | Kg | |
| 102 | 102 | Taking down carefully existing aluminium /copper conductor point wiring (light / fan / socket or power point) complete, with all fittings such as switches, socket, regulator, ceiling rose, utility light fittings and lamp holders etc and removing materials from site and making good the disturbed surfaces of walls roof and floor etc as per existing specification complete all as specified and as directed. | 248 | Per Point | |
| 103 | 103 | Taking down carefully by unscrewing from boards / outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and fan regulators etc. for reuse at site complete all as specified and as directed. \n(Note : To be measured only when found serviceable in all respects complete for reuse) | 10 | Each | |
| 104 | 104 | Material and labour for point wiring for one light controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn carefully through existing/New concealed conduit along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including new pressed steel sunken boxes , concealed type with 3 mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including making good disturbed surface all as specified and as directed. | 102 | Per Point | |
| 105 | 105 | All as per Item no 104 here-in-before but for one light point controlled by two 2 way switch all as specified and as directed. | 4 | Per Point | |
| 106 | 106 | All as per Item no 104 here-in-before but for one fan /E Fan point controlled by 1 one way switch and regulator all as specified and as directed. | 50 | Per Point | |
| 107 | 107 | All as per Item no 104 above but for one 3 pin switch socket outlet, 5 Amp on independent board all as specified and as directed. | 58 | Per Point | |
| 108 | 108 | All as per Item no 104 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches all as specified and as directed | 35 | Per Point | |
| 109 | 109 | All as per Item no 104 here-in-before but for one16 Amp 3 & 5 pin switch socket outlet, independent with 4.0 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 4.0 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed. | 40 | Per Point | |
| 110 | 110 | All as per Item no 104 here-in-before but for one bell point controlled by one bell push on the same board with other switches or independent all as specified and as directed. | 8 | Per Point | |
| 111 | 111 | Material and labour for sub main wiring with two single core PVC insulated un-sheathed cable with multi-stranded copper conductor of 6.0 sq mm size and drawing into and including concealed PVC conduit of 25 mm dia with earthing cable of PVC insulated un-sheathed stranded copper conductor of size 6.0 sqmm, single core, as earth continuity wire all as specified and as directed.\n(NOTE: 3 runs of 6.0 Sqmm cable and one run of PVC concealed conduit 25mm dia will be measured as one unit i.e. RM) | 124 | RM | |
| 112 | 112 | Supply and fixing socket out let multipurpose 3 pin 15 amp and one 3 pin 5 amp controlled by and including one 15 amp switch all as specified and as directed. | 40 | Each | |
| 113 | 113 | Supply and fixing switch piano flush button single pole one way 5 amps all as specified and as directed. | 144 | Each | |
| 114 | 114 | Fixing only switch flush button single pole one way 5 amp all as specified and as directed.\n(Material obtained from item No 103 here in before shall be used) | 2 | Each | |
| 115 | 115 | S&F switch flush type, single pole Two way 5 Amps 230 volts all as specified and as directed. | 4 | Each | |
| 116 | 116 | Supply and fixing switch socket outlet 5 pin 5 amp flush type with incl switch all as specified and as directed. | 89 | Each | |
| 117 | 117 | Fixing only switch socket outlet 5 amp flush type all as specified and as directed. \n(Material obtained from item No 103 here in before shall be used) | 4 | Each | |
| 118 | 118 | Supply and fixing ceiling rose surface bakelite three terminals all as specified and as directed. | 72 | Each | |
| 119 | 119 | Fixing only ceiling rose surface bakelite three terminals all as specified and as directed.\n(Material obtained from item No 103 here in before shall be used) | 2 | Each | |
| 120 | 120 | Supply and fixing fan regulator electronic deluxe rotary step type all as specified and as directed. | 32 | Each | |
| 121 | 121 | Fixing only fan regulator any type all as specified and as directed. \n(Material obtained from item No 103 here in before shall be used) | 2 | Each | |
| 122 | 122 | S&F bell ding dong 5 Amps, flush type, 230 Volts, 50 Hz complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 123 | 123 | S&F bell push switch 6 Amps, flush type, 230 Volts, 50 Hz complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 124 | 124 | Supply and fixing sheet metal enclosure for MCCB, DBs, phosphatised, Powder coated , Triple Pole and Neutral (TPN), suitable for 4 way, Double door 415 Volts complete all as specified and as directed. | 2 | Each | |
| 125 | 125 | Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 8 way with din rail earth and neutral bar complete all as specified and as directed. | 9 | Each | |
| 126 | 126 | Supply and fixing in proper position MCCB four pole of capacity 100 amps, 415 Volts 25kA breaking capacity, complete all as specified and as directed. | 2 | Each | |
| 127 | 127 | Supply and fixing in proper position MCB four pole of capacity 40 to 63 amps, 415 Volts C-series with 10kA breaking capacity all as specified and as directed. | 8 | Each | |
| 128 | 128 | Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position complete all as specified and as directed. | 54 | Each | |
| 129 | 129 | Supply and fixing in proper position MCB double pole of capacity 40 to 63 amps, 240 Volts C-series with 10kA breaking capacity complete all as specified and as directed. | 9 | Each | |
| 130 | 130 | Supply and fixing indoor luminaries decorative batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 10 W,230 V,50 HZ, slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed. \nMake : CG Cat Part no. LDL -10-CDL or equivalent as approved by GE | 24 | Each | |
| 131 | 131 | Supply and fixing indoor luminaries decorative batten for wall/ceiling mounting box type Extruded aluminium housing ,PC Diffuser, energy efficient saving LED BATTEN LIGHT 20W,230 V,50 HZ, slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed. \nMake: CG Cat Part No. CCS-100-20-65-HL2-DP-NWH / Havells Cat Part No. LHEXACP7IN1W020 or equivalent as approved by GE | 36 | Each | |
| 132 | 132 | Supply 10 W LED decorative CITY 3 wall/surface mounting polycarbonate body suitable for retrofit LED Lamp Base B-22 incl lamp ,all as specified and as directed. \nMake Havells Cat Part no LHDL06160099 or equivalent as approved by GE | 16 | Each | |
| 133 | 133 | Supply only LED mirror light fittings 07 W, 230 V, 50 HZ suitable for indoor and outdoor applications complete all as specified and as directed. | 8 | Each | |
| 134 | 134 | Supply and fixing LED bulk head fittings 10 W,230 V,50 HZ suitable for indoor and outdoor applications complete all as specified and as directed. \nMake Surya cat Part No SLE BH 10 W or equivalent as approved by GE | 12 | Each | |
| 135 | 135 | Supply and fixing on wall security LED light luminaries fitting 1X25 W and including cable for connection from ceiling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1.5 m long bent to shape including bolt, nut,washer,clamp etc all as specified and as directed by the Engineer-in-charge. | 6 | Each | |
| 136 | 136 | Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades for safe custody for reuse and re-assembling the fan complete and refixing the fan in same position including all electrical connection all as specified and as directed.\n | 24 | Each Job | |
| 137 | 137 | Material and labour for taking out and removing burnt copper winding, cleaning the armature, rewinding the fan armature for 1200mm sweep fan with new super enamelled copper wire of existing gauge including supply and fixing necessary insulating materials etc and varnishing with approved grade of insulation varnish and heating up and testing all as specified and as directed. | 16 | Each Job | |
| 138 | 138 | Supply only ball bearings, bearing No.6201/6202 suitable for ceiling fan/exhaust fan of any sweep any make/model complete all as specified and as directed by the Engineer-in-Charge.\n | 16 | Each | |
| 139 | 139 | All as per item No. 138 above but bearing No.6203/6204. complete all as specified and as directed by the Engineer-in-Charge. | 16 | Each | |
| 140 | 140 | Supply only fan condenser up to 2.5 mfd suitable for ceiling fan complete all as specified and as directed by the Engineer-in-Charge. | 16 | Each | |
| 141 | 141 | Supply only fan condenser up to 3.15 mfd suitable for ceiling fan complete all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 142 | 142 | Material and labour for painting of ceiling fans complete of any sweep/make with one coat of first quality synthetic enamel paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavities with filler materials, and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc 2 cm ) complete all as specified and as directed. | 16 | Each job | |
| 143 | 143 | Supply and fixing Ceiling fan of 1200 mm sweep 5 STAR rating with clamp and hook at proper position with taking down old ceiling fan and kept in MES store yard with necessary accessories etc. all as specified and as directed. \n(Havells model no : ES 40 or equivalent as approved by GE) | 8 | Each | |
| 144 | 144 | M&L complete for exhaust fan metal body of size 300 mm sweep, single phase,230 volts AC with louver shutter /grill and connection complete with cutting of a hole on wall of suitable size all as specified and as directed. \n(Havells cat no. Ventil air -DB or equivalent as approved by GE) | 8 | Each | |
| 145 | 145 | M&L complete for exhaust fan PVC body of size 250 mm sweep, single phase, 230volts AC with louver shutter /grill and connection complete with cutting of a hole on wall of suitable size all as specified and as directed. \n(Havells model no. Ventil air - DX white or equivalent as approved by GE) | 8 | Each | |
| 146 | 146 | S&F water heater (Geyser) storage capacity 25 ltrs vertical type 5 star rated alongwith electric wiring 04 Nos GI Anchor bolts 10mm dia, 100mm long nuts and washer and connecting pipe for outlet and inlet water from geyser complete all as specified and as directed. | 8 | Each | |
| 147 | 147 | Supply,installation,commission and testing including providing all necessary electrical connection, LT feeder pillar box of size 0.8 m x0.8 m x 0.6 m, outdoor type 3 phase 4 wire, made of 3.15mm thick MS sheet with MS angle iron frame slanting roof, including painting necessary earth work, foundation with PCC 1:2:4 for 4 Nos legs , inclusive of under mentioned items incl provn of insulated TPN copper bus bar of appropriate size mounted on porcelain insulator and internal connection with PVC insulated stranded single core copper cable/strip of suitable size \n(a) MCCB 4 pole, 415 volts,160 amps, 25 KA = 01 No (As Incomer) \n(b) MCCB 4 pole, 415 volts,100 amps, 25 KA = 01 No (out going)\n(c) MCCB 4 pole, 415 volts,63 amps, 25 KA = 01 No (out going) \n(d) LED indicator lamp (set of three-Red,Yellow,Blue) -01 set \n(e) Volt meter-01 , Amp meter with CT selector switch -01 | 2 | Each | |
| 148 | 148 | Supply and fixing AC single phase static Electronic KWH energy meter of accuracy class 1.0, 240v, 50Hz, with backalite LCD Display, of rating 10-60A with transparent hinged type Box with six month History of energy in KWH with taking down old meter and kept in MES store yard with accessories all as specified and as directed by the Engineer-in-Charge. | 8 | Each | |
| 149 | 149 | Taking down existing unserviceable MS box after disconnecting all electric connection and Supply and fixing factory made enclosure box for mounting meter and DB of size 0.9x0.6x0.2m indoor and wall mounting type made of 2mm thick MS sheet with front side openable with two nos hinged type door with locking arrangement and danger notice board, dust and vermin proof including providing all necessary electrical connection by supply and fixing single core multi stranded copper conductor FRLS cable of appropriate size, making circular hole for cable entry and exit including cable gland of required size, incl two coat of powder coated paint to out side surface and two coat of synthetic enamel paint to inside surface over a coat of red oxide , and making good the disturbed surfaces or wall etc complete incl necessary nut, bolt, washers for mounting on wall and making provisions for mounting electric meters and MCB DBs all as specified and as directed. | 2 | Each Job | |
| 150 | 150 | Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 25 Sqmm 3.5 core laid in trench /poles/on wall complete all as specified and as directed. | 60 | Rm | |
| 151 | 151 | Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth and getting out soft/loose soil for laying of under ground cable complete all as specified and as directed by the Engineer-in-Charge. | 35 | Cum | |
| 152 | 152 | Returning/filling including spreading, levelling and well ramming in layers n. exc. 25cm in thick complete all as specified and as directed by the Engineer-in-Charge. | 17 | Cu.m. | |
| 153 | 153 | Removing excavated material to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge. | 18 | Cu.m. | |
| 154 | 154 | Material and labour for sand cushioning for protection of underground cable consolidated and compacted with clean dry sand all as specified and as directed \n(Note : Compacted thickness shall only be measured and paid) | 10 | Cum | |
| 155 | 155 | Supply and lay bricks common burnt clay building bricks sub-class B of size 230x113x75 in cable trenches complete all as directed | 1394 | Each | |
| 156 | 156 | M&L for boring of holes under road, pavement hard standing by trenchless technology using ultrasound technology & necessary machine including HDPE pipe of 40 mm dia suitable for 0.4 Mpa working pressure complete all as specified and as directed. | 12 | RM | |
| 157 | 157 | M&L for galvanized iron tubing 25mm bore light grade with all fittings for protection of FRLS cable, laid in trenches/wall/floor including necessary clamps, bolt/nut complete all as specified and as directed. \nNote: Earth work excavation will be measured and paid separately. | 10 | RM | |
| 158 | 158 | M&L for Earthing complete with 7.5m CI pipe 80 mm dia with flanged ends, centrifugally cast, class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slot up to 2.5mtrs length buried directly and preferably vertically in ground with top flanged ended 2.5mtrs below ground level welded/ connected with GI strip 32×6mm size on the top edge of the flange to bottom edge of the flanged for earthing including filling the pit with charcoal common salt surrounding the earth pipe including drilling 400 mm dia bore in any strata of soil to lower the CI pipe complete including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab and necessary testing on completion complete all as specified and as directed. | 2 | Each | |
| 159 | 159 | Supply only outdoor integral LED Bollard luminaire10 watt with soft 360 deg light distribution incl PCC 1:2:4 TYPE B2 foundation Of garden light ,copper conductor flexible wire from busbar to connector all as specified and as directed.\nMake : CG cat no. LBLSN-10-CDL or equivalent as approved by GE | 8 | Each | |
| 160 | 160 | Supply, fixing and cable junction boxes of size 155mm x 210mm x 92mm IP 66 for cable entry, comprising of SPN aluminium bus bar of capacity 16 Amp 230 Volt fixed , making holes on strips for connecting cables and fixed to garden light pole with and including MS clamp of size 25mmx5mm incl nut ,bolt, washer and including prvn of MCB SP 6 A, C curve 10kA breaking capacity -1no with mounting rail all as specified and as directed. | 7 | Each | |
| 161 | 161 | Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 6 Sqmm 2 core laid in trench /poles/on wall complete all as specified and as directed. | 120 | Rm | |
| 162 | 162 | Material and labour for sub main wiring with two single core PVC insulated un-sheathed cable with multi-stranded copper conductor of 4.0 sq mm size and drawing into and including concealed PVC conduit of 25 mm dia with earthing cable of PVC insulated un-sheathed stranded copper conductor of size 4.0 sqmm, single core, as earth continuity wire all as specified and as directed.\n(NOTE: 3 runs of 4.0 Sqmm cable and one run of PVC concealed conduit 25mm dia will be measured as one unit i.e. RM) | 90 | RM | |
| 163 | 163 | Supply and fixing Ceiling fan of 1200 mm sweep 5 STAR rating with clamp and hook at proper position with necessary accessories etc all as specified and as directed. \n(Havells model no : ES 40 or equivalent as approved by GE) | 10 | Each | |
| 164 | 164 | S&F 1.5 m down rod assembly with MS clamp hooks in false ceiling complete for ceiling fan 1200 mm / 1400 mm sweep complete all as specified and as directed. | 10 | Each | |
| 165 | 165 | S&F 1 x 80 watt LED high bay light new generation high luminous efficiency , fixed to false ceiling surface/ suspended with including necessary fixing accessories channel, MS clamp, nuts, bolts, washers, suspended rods of required size etc complete all as specified and as directed. \nHavells Cat Part No. SAUCERGENXPROHBP80WLED757P60DBOLTG or equivalent as approved by GE | 10 | Each |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
