Buildings North Circle Kozhikode - Construction Of New Block Building For Rest Househosdurg At Kanhangad In Kasargod District Construction Of Rest House Building - Rccframed Structure, Hosdurg,Kasargod-Kerala

TDR : 28281371

Tender Notice
BOQ

Expired

Hosdurg,Kasargod , Kerala

Tender Brief : Buildings North Circle Kozhikode - Construction Of New Block Building For Rest Househosdurg At Kanhangad In Kasargod District Construction Of Rest House Building - RccFramed Structure

Document Fees
₹ 6508 /-

EMD
₹ 50000.0 /-

Tender Value
₹ 1.75 Crore /-

Submission Date
07-07-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Work Name:GENERAL-CONSTRUCTION OF NEW BLOCK BUILDING FOR REST HOUSE ,HOSDURG AT KANHANGAD IN KASARGOD DISTRICT.-Work-General Civil work
1	1	APPENDIX - A - CONSTRUCTION OF BUILDING
2	1.001	2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.	BI01010001010000000000000515BI0100001114	2100	sqm
3	1.002	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	BI01010001010000000000000515BI0100001115	573.723	cum
4	1.003	2.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil	BI01010001010000000000000515BI0100001116	189.415	cum
5	1.004	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)	BI01010001010000000000000515BI0100001117	59.635	cum
6	1.005	5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	BI01010001010000000000000515BI0100001118	331.745	sqm
7	1.006	5.9.19:Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges	BI01010001010000000000000515BI0100001119	78.399	sqm
8	1.007	5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers	BI01010001010000000000000515BI0100001120	930.508	sqm
9	1.008	5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts	BI01010001010000000000000515BI0100001121	408.691	sqm
10	1.009	5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform	BI01010001010000000000000515BI0100001122	506.769	sqm
11	1.01	5.9.7:Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)	BI01010001010000000000000515BI0100001123	23.64	sqm
12	1.011	5.9.16.1:Centering and shuttering including strutting, etc. and removal of form for:\nEdges of slabs and breaks in floors and wallsUnder 20 cm wide	BI01010001010000000000000515BI0100001124	165	metre
13	1.012	od64642/2020_2021/BL:Providing and laying in position machine batched and machine mixed design mix M-25 grade\r\ncement concrete for reinforced cement concrete work, using cement content as per approved\r\ndesign mix, including pumping of concrete to site of laying but excluding the cost of centering,\r\nshuttering, finishing and reinforcement, including admixtures in recommended proportions as\r\nper IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing\r\nstrength and durability as per direction of Engineer - in-charge. Note:- Cement content\r\nconsidered in this item is @ 330 kg/ cum. Excess cement used as per design mix shall not be payable to the Contractor. All work upto plinth level	BI01010001010000000000000515BI0100001125	96.409	cum
14	1.013	5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).	BI01010001010000000000000515BI0100001126	1.643	cum
15	1.014	od64648/2020_2021/BL:Providing and laying in position machine batched and machine mixed design mix M-25 grade\r\ncement concrete for reinforced cement concrete work, using cement content as per approved\r\ndesign mix, including pumping of concrete to site of laying but excluding the cost of centering,\r\nshuttering, finishing and reinforcement, including admixtures in recommended proportions as\r\nper IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing\r\nstrength and durability as per direction of Engineer - in-charge. Note:- Cement content\r\nconsidered in this item is @ 330 kg/ cum. Excess cement used as per design mix shall not be payable to the Contractor. All work above plinth level up to floor v level	BI01010001010000000000000515BI0100001127	162.844	cum
16	1.015	2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.	BI01010001010000000000000515BI0100001128	470.368	cum
17	1.016	5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more	BI01010001010000000000000515BI0100001129	13203.4	kilogram
18	1.017	5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more	BI01010001010000000000000515BI0100001130	24780.5	kg
19	1.018	od41624/2019_2020/BL:Laterate masonry with neatly dressed laterate stone of size30x20x20cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.	BI01010001010000000000000515BI0100001131	81.743	cum
20	1.019	od41625/2019_2020/BL:Laterate masonry with neatly dressed laterate stone of size 30x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.	BI01010001010000000000000515BI0100001132	245.465	cum
21	1.02	9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood	BI01010001010000000000000515BI0100001133	3.929	cum
22	1.021	9.5.1.1:Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.\nSecond class teak wood35 mm thick shutters	BI01010001010000000000000515BI0100001134	99.519	sqm
23	1.022	9.7.1:Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood	BI01010001010000000000000515BI0100001135	22.409	sqm
24	1.023	9.53:Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001136	250	each
25	1.024	10.26.1:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube	BI01010001010000000000000515BI0100001137	122.32	kg
26	1.025	10.26.3:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes	BI01010001010000000000000515BI0100001138	340.48	kg
27	1.026	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness	BI01010001010000000000000515BI0100001139	60.04	sqm
28	1.027	9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc	BI01010001010000000000000515BI0100001140	1404.74	kg
29	1.028	9.76:Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.	BI01010001010000000000000515BI0100001141	19	no
30	1.029	9.72.1:Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:125x85x5.5 mm (heavy type)	BI01010001010000000000000515BI0100001142	24	no
31	1.03	9.72.3:Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:100x85x5.5 mm (heavy type)	BI01010001010000000000000515BI0100001143	76	no
32	1.031	9.72.4:Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:100x70x4 mm (ordinary type)	BI01010001010000000000000515BI0100001144	333	no
33	1.032	9.74.2:Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:200x10 mm	BI01010001010000000000000515BI0100001145	12	no
34	1.033	9.74.4:Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:100x10 mm	BI01010001010000000000000515BI0100001146	38	no
35	1.034	9.75.1:Providing and fixing bright finished door latch with necessary screws etc. complete:300x16x5 mm	BI01010001010000000000000515BI0100001147	3	no
36	1.035	9.82:Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.	BI01010001010000000000000515BI0100001148	22	no
37	1.036	10.17:Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.	BI01010001010000000000000515BI0100001149	26	each
38	1.037	9.84:Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.	BI01010001010000000000000515BI0100001150	15	no
39	1.038	22.5:Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.	BI01010001010000000000000515BI0100001151	39.6	sqm
40	1.039	9.119:Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door fame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in Charge.	BI01010001010000000000000515BI0100001152	69.6	metre
41	1.04	9.118.1:Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).	BI01010001010000000000000515BI0100001153	16.8	sqm
42	1.041	13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)	BI01010001010000000000000515BI0100001154	1141.33	sqm
43	1.042	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	BI01010001010000000000000515BI0100001155	2749.34	sqm
44	1.043	13.73.1:Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions of the Engineer-in-Charge:15 mm wide and 15 mm deep groove	BI01010001010000000000000515BI0100001156	1118.88	metre
45	1.044	13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)	BI01010001010000000000000515BI0100001157	173.87	sqm
46	1.045	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	BI01010001010000000000000515BI0100001158	3077.62	sqm
47	1.046	13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)	BI01010001010000000000000515BI0100001159	813.051	sqm
48	1.047	13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)	BI01010001010000000000000515BI0100001160	22.5	sqm
49	1.048	13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work	BI01010001010000000000000515BI0100001161	52	sqm
50	1.049	13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .	BI01010001010000000000000515BI0100001162	84.843	sqm
51	1.05	13.69.1:Polishing on wood work with ready mixed wax polish of approved brand and manufacture:New work	BI01010001010000000000000515BI0100001163	173.161	sqm
52	1.051	13.71:Lettering with black Japan pint of approved brand and manufacture	BI01010001010000000000000515BI0100001164	250	per Letter per cm height
53	1.052	11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.	BI01010001010000000000000515BI0100001165	234.625	sqm
54	1.053	11.46.2:Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm	BI01010001010000000000000515BI0100001166	19.508	sqm
55	1.054	11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.	BI01010001010000000000000515BI0100001167	383.666	sqm
56	1.055	13.20:Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 ( 1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 ( 1 cement : 3 fine sand) mixed with 10% finely grounded hydrated line by volume of cement .	BI01010001010000000000000515BI0100001168	48.83	sqm
57	1.056	13.27:Extra for lining out plaster to imitate stone or concrete blocks walling.	BI01010001010000000000000515BI0100001169	74.432	sqm
58	1.057	8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm	BI01010001010000000000000515BI0100001170	59.548	sqm
59	1.058	8.12:Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.\r\n\r\na. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.	BI01010001010000000000000515BI0100001171	95.824	sqm
60	1.059	8.11:Providing and fixing machine cut, mirror/ eggshell polished, Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps, etc., in required design and pattern wherever require, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-charge.\r\n\r\na. 18mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore, etc.	BI01010001010000000000000515BI0100001172	8.64	sqm
61	1.06	8.13.1:Providing and laying Polished Granite stone flooring in required design and\npatterns, in linear as well as curvilinear portions of the building all complete as\nper the architectural drawings with 18 mm thick stone slab over 20 mm (average)\nthick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with\ncement slurry and pointing with white cement slurry admixed with pigment of\nmatching shade including rubbing , curing and polishing etc. all complete as\nspecified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or\r\nequivalent.	BI01010001010000000000000515BI0100001173	224.96	sqm
62	1.061	12.20:Providing and laying pressed clay tiles ( as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 ( 1 cement : 4 coarse sand mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) and finished neat complete	BI01010001010000000000000515BI0100001174	64.795	sqm
63	1.062	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	BI01010001010000000000000515BI0100001175	12093.2	kg
64	1.063	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	BI01010001010000000000000515BI0100001176	5298.99	kg
65	1.064	50.12.5.1:Providing and fixing false ceiling with e board classic tile or equivalent make of size 610x610x4 mm ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)	BI01010001010000000000000515BI0100001177	433.75	sqm
66	1.065	21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).	BI01010001010000000000000515BI0100001178	444.57	kg
67	1.066	12.48:Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)	BI01010001010000000000000515BI0100001179	412.767	sqm
68	1.067	12.49:Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).	BI01010001010000000000000515BI0100001180	210	metre
69	1.068	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	BI01010001010000000000000515BI0100001181	3555.18	sqm
70	1.069	2.35.3.1:Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):\nTreatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration	BI01010001010000000000000515BI0100001182	307.565	sqm
71	1.07	18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.	BI01010001010000000000000515BI0100001183	3000	Litre
72	2	Water supply and sanitary works
73	2.001	17.3.1:Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid	BI01010001010000000000000515BI0100001185	12	each
74	2.002	17.1.1:Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests	BI01010001010000000000000515BI0100001186	2	each
75	2.003	17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap\r\n	BI01010001010000000000000515BI0100001187	18	each
76	2.004	17.32.3:Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions)	BI01010001010000000000000515BI0100001188	18	each
77	2.005	50.17.1.2:Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.	BI01010001010000000000000515BI0100001189	25	no
78	2.006	18.65:Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.	BI01010001010000000000000515BI0100001190	20	each
79	2.007	17.10.1.4:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:\nKitchen sink with drain board510x1040 mm bowl depth 178 mm	BI01010001010000000000000515BI0100001191	1	each
80	2.008	50.18.7.6.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall	BI01010001010000000000000515BI0100001192	48	metre
81	2.009	50.18.8.6.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 10 kgf/cm2	BI01010001010000000000000515BI0100001193	60	metre
82	2.01	50.18.8.8.2:Providing and fixing PVC pipes, fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per the direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 4 kgf/cm2	BI01010001010000000000000515BI0100001194	35	metre
83	2.011	50.18.9.15.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6 Kgf/cm2 - External work - Exposed on wall	BI01010001010000000000000515BI0100001195	100	metre
84	2.012	50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall	BI01010001010000000000000515BI0100001196	70	metre
85	2.013	50.18.8.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2	BI01010001010000000000000515BI0100001197	45	metre
86	2.014	18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore	BI01010001010000000000000515BI0100001198	39	each
87	2.015	18.16.2:Providing and fixing brass stop cock of approved quality :20 mm nominal bore	BI01010001010000000000000515BI0100001199	14	each
88	2.016	50.17.1.5:Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.	BI01010001010000000000000515BI0100001200	16	no
89	2.017	18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore	BI01010001010000000000000515BI0100001201	23	each
90	2.018	18.17.1:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore	BI01010001010000000000000515BI0100001202	2	each
91	2.019	18.17.2:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore	BI01010001010000000000000515BI0100001203	3	each
92	2.02	18.17.1A:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore	BI01010001010000000000000515BI0100001204	13	no
93	2.021	50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2	BI01010001010000000000000515BI0100001205	40	metre
94	2.022	50.18.8.9.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2	BI01010001010000000000000515BI0100001206	20	metre
95	2.023	50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall	BI01010001010000000000000515BI0100001207	35	metre
96	2.024	18.36.1:Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 grades stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5	BI01010001010000000000000515BI0100001208	7	each

Also Visit

Tenders

Kerala Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Buildings North Circle Kozhikode - Construction Of New Block Building For Rest Househosdurg At Kanhangad In Kasargod District Construction Of Rest House Building - Rccframed Structure, Hosdurg,Kasargod-Kerala

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Buildings North Circle Kozhikode - Construction Of New Block Building For Rest Househosdurg At Kanhangad In Kasargod District Construction Of Rest House Building - Rccframed Structure, Hosdurg,Kasargod-Kerala

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us