Himachal Pradesh State Industrial Development Corporation Limited-HPSIDC has published Construction Of Morrah Buffalo Farm Vill . Barnoh Distt . Una ( Hp ) . ( Sh- C/O Ultra Modern Shed , Calving Pen Shed , Calf Pen Shed , Open Court Yard Shed , Isolation Shed , Hay Store , Feed Store , Milk Barn Shed , Veterinary Dispensing U. Submission Date for this Tender is 29-06-2021. Shed Construction Tenders in Barnoh (Una) Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of Morrah Buffalo Farm Vill. Barnoh Distt. Una (HP). (SH:- C/o ultra modern shed, calving pen shed, calf pen shed, open court yard shed, isolation shed, hay store, feed store, milk barn shed, veterinary dispensing unit and office infrastructure and training centre). | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed including, dewatering wherever required, setting out to required lines, levels as shown on the drawing including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 1377 | Cum. | |
| 2 | 2.01 | Providing form work with steel plates (3.15mm) three point fifteen milimetre thick welded with angle iron in frame (30x30x5mm) ( Thirty x thirty x five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden battens and ballies, height of propping and centering below supporting floor to ceiling including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (a). Foundations, footings & bases of columns etc., and mass concrete. | 775.26 | Sqm. | |
| 3 | 2.02 | (B). Column, pillars, posts and struts. (i). Square, rectangular or polygonal in plan. | 1418.33 | Sqm. | |
| 4 | 2.03 | (ii) Column, pillars, posts and struts. Circular in plan. | 2.38 | Sqm. | |
| 5 | 2.04 | (C). Beams, cantilevers, girders and lintels. i. Sides and soffits of beams, beam haunching, cantilevers, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor. | 2352.9 | Sqm. | |
| 6 | 2.05 | (D).Flat surfaces such as soffits of suspended floors, roofs, landing and the like. ( i). Floors etc., upto 200mm( Two hundred milimetre) in thickness. | 874.53 | Sqm. | |
| 7 | 2.06 | (e). Stair cases with slopping or stepped soffits excluding landing | 26.74 | Sqm. | |
| 8 | 2.07 | f ) Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like. | 974.86 | Sqm. | |
| 9 | 3 | Providing and laying cement concrete 1:6:12 (one cement :six sand :twelve graded stone aggregate 40mm nominal size)(Forty milimetre) and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts. | 232.94 | Cum. | |
| 10 | 4.01 | Providing and laying cement concrete 1:1.5:3 (One cement : one point five sand :Three graded stone aggregate 20mm nominal size)( Twenty milimetre) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials with in all leads and lifts and as per the direction of Engineer-in-Charge. (a) Foundations, footings, bases of columns and the like and mass concrete. | 241.7 | Cum. | |
| 11 | 4.02 | (b). Columns, pillars, posts and struts in all floor levels. | 144.71 | Cum. | |
| 12 | 4.03 | (c). Suspended floors, roofs, landings and shelves and their support balconies, beams, girders, bressumers and cantilevers in all floor levels. | 361.81 | Cum. | |
| 13 | 4.04 | (d). Stair cases (except spiral stair cases) excluding landing but including preparing to the surface and finishing of nosing in all floor levels. | 2.98 | Cum. | |
| 14 | 4.05 | (e) Walls including attached buttresses, pilasters and thier caps and bases string courses etc. upto floor two level. | 70.2 | Cum. | |
| 15 | 5 | Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth including carriage of material with in all leads and lifts | 350.61 | Cum. | |
| 16 | 6 | Providing mild steel/tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all floor levels (a). Tor steel. including carriage of material with in all leads and lifts and as per the direction of Engineer-in-Charge. | 87579.9 | K.g. | |
| 17 | 7 | Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Sand) First Class Bricks including carriage of material within all leads and lifts. | 164.49 | Cum. | |
| 18 | 8 | Brick work using common burnt clay building bricks in superstructure 1:6 (1 Cement : 6 Sand) First Class Bricks including carriage of material within all leads and lifts. | 445.9 | Cum. | |
| 19 | 9.01 | Providing and fixing anodised/ dyed aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge including carriage of material with in all leads and lifts (a)For doors windows and ventilatiors and glazed partitions frames. | 1083.67 | Kg. | |
| 20 | 9.02 | For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) including carriage of material with in all leads and lifts | 2540.97 | Kg | |
| 21 | 10 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm. including carriage of material with in all leads and lifts | 82.5 | Sqm. | |
| 22 | 11 | Providing and fixing Particle board bwp phenol bonded exterior/interior grade in partitions Prelaminated board bwp phenol bonded exterior/interion grade both sides. 12mm thick including carriage of material with in all leads and lifts | 85.05 | Sqm. | |
| 23 | 12 | Providing and fixing galvanised M.S. wire gauge of IS gauge designation 140 g with wire of dia 0.71 mm to windows and clerestory windows including beading of aluminium including carriage of material with in all leads and lifts | 101.13 | Sqm. | |
| 24 | 13 | Providing and fixing 1 mm thick M.S sheet garrage door with frame of 40 mmX 40mm X6mm angle iron 3.15 mm m.s gusset plates at the junctions and corners,all necessary fittings complete including applying a priming coat of red lead paint. Using Flats 30 mmX6 mm for diagonal braces and central cross pieces including carriage of material with in all leads and lifts | 57.33 | Sqm. | |
| 25 | 14 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge including carriage of material with in all leads and lifts | 148.32 | Kg. | |
| 26 | 15 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc., complete: including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. a) 300X16 mm | 39 | Each | |
| 27 | 16.01 | Providing and fixing anodized aluminium tower bolt (barrel type) anodized transparent or dyed to required shade and colour with screws etc., complete including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. ( a). 250x10mm | 78 | Each | |
| 28 | 16.02 | ( b). 200x10mm (Two Hundred into Ten milimetre) | 300 | Each | |
| 29 | 17.01 | Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc., complete: including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (i) 125mm.( One Hundred Twenty Five milimetre) | 90 | Each | |
| 30 | 17.02 | (ii) 100mm.( One Hundred milimetre) | 156 | Each | |
| 31 | 18 | Half brick work using common burnt clay building bricks in super structure above plinth level upto floor all level using second class building bricks in cement mortar 1:4 (1cement : 4sand) including carriage of materials within all leads and lifts and as per the direction of Engineer in charge. | 104.87 | Sqm. | |
| 32 | 19 | 6mm (Six milimetre) cement plaster to ceiling in cement mortar 1:3 (One Cement is to three Sand) in all floor level. The rate isincluding carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. | 628.63 | Sqm. | |
| 33 | 20 | 15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. | 3137.25 | Sqm. | |
| 34 | 21 | 15mm (fifteen milimetres) thick 1 in single coat on fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth within all leads, lifts and as per the direction of Engineer-in-Charge. | 2639.85 | Sqm. | |
| 35 | 22 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material with in all leads and lifts | 3928.39 | Sqm. | |
| 36 | 23 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of material with in all leads and lifts | 2260.91 | Sqm. | |
| 37 | 24 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. including carriage of material with in all leads and lifts | 1667.48 | Sqm. | |
| 38 | 25 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts | 2411.37 | Sqm. | |
| 39 | 26 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty doublecharged vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material with in all leads and lifts | 260.21 | Sqm. | |
| 40 | 27 | Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete. 25 mm thick including carriage of material with in all leads and lifts | 306.41 | Sqm. | |
| 41 | 28 | Providing and laying granite stone in flooring 20mm(average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 64.45 | Sqm. | |
| 42 | 29 | Providing and fixing Coloured digital/ glazed tiles 6 mm ( six millimetre) thick in skirting risers of steps and dado nitco or its equivalent of approved make and size 12mm ( Twelve milimetre) thick cement mortar 1:3 (one cement isto three sand) and jointing with neat cement slurry including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 113.16 | Sqm. | |
| 43 | 30 | Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement including carriage of material with in all leads and lifts | 22.42 | Sqm. | |
| 44 | 31 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material with in all leads and lifts | 442.83 | Sqm. | |
| 45 | 32 | Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint including carriage of material with in all leads and lifts | 13.2 | Sqm. | |
| 46 | 33.01 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint A) In gratings framed guard bars,ladders,railling,brackets and similar works including carriage of material with in all leads and lifts | 133.48 | Qtl | |
| 47 | 33.02 | b) In trusses and trussed purlins in buildings. | 639.87 | Qtl | |
| 48 | 34 | Finishing with floating coat of neat cement slurry including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 110.4 | Sqm. | |
| 49 | 35 | Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished 40 mm thick including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 53.95 | Sqm. | |
| 50 | 36 | Constructing manhole with R.C.C top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing: Inside size 800mm x 800mm and 500mm deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mmx610mm internal dimensions total weight of cover and frame to be not less than 38kg. (Weight of cover 23 kg and weight of frame 15 kg.) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3) including carriage of material with in all leads and lifts | 13 | Each | |
| 51 | 37 | Construction chamber 300mm x 300mmx500mm inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 ( 1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete with 100 mm thick walls of brick masonry in cement mortar 1:5 (1 cement: 5 sand) including carriage of material with in all leads and lifts | 7 | Each | |
| 52 | 38.01 | Providing and fixing to wall ceilling and floor galvainised mild steeel tubes(medium grade)tube fittings and clamps including making good the wall including carriage of material within all leads and lifts. (a) 15 mm nominal bore. | 570 | Rmt | |
| 53 | 38.02 | (b) 20 mm nominal bore. | 210 | Rmt | |
| 54 | 39 | Making connection of galvainised steel distribution branch with galvainised mild steel main 20mm to 40mm nominal bore by providing and fixing Tee including cutting and threading the pipes complete including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 40 | Each | |
| 55 | 40 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm dia including carriage of material with in all leads and lifts | 150 | Rmt | |
| 56 | 41.01 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. Plain bend 110 mm nominal size including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 56 | Each | |
| 57 | 41.02 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. 110 mm dia including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 27 | Each | |
| 58 | 41.03 | Providing and fixing pvc cowl 110mm dia including carriage of material with in all leads and lifts | 3 | Each | |
| 59 | 42 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 36 | Each | |
| 60 | 43 | Providing and fixing Vitreous china wash down, water closet ( European type W.C pan) Cream shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1 Cement :1 Sand ) ( Seat and over to be measured and paid for separately) including carriage of material within all leads and lifts. Ordinary closet. | 7 | Each | |
| 61 | 44 | Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.110mm dia including carriage of material with in all lead and lifts | 7 | Each | |
| 62 | 45 | Providing and fixing PTMT Coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material within all leads and lifts. | 7 | Each | |
| 63 | 46 | Providing and fixing GI inlet connection for flush pipe with WC pan including carriage of material within all leads and lifts. | 27 | Each | |
| 64 | 47 | Providing and fixing vitreous china wash basin Cream Shade with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings.Flat back630x450mm including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 6 | Each | |
| 65 | 48 | Providing and fixing CP brass waste for wash basin or sink 32 mm dia including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 20 | Each | |
| 66 | 49 | Providing and fixing 100m sand cast iron grating for gully,foor or Nahani trap including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 24 | Each | |
| 67 | 50 | Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers including carriage of material within all leads and lifts. | 8 | Each | |
| 68 | 51 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm including carriage of material within all leads and lifts. | 8 | Each | |
| 69 | 52 | Providing and fixing CP brass bib tap with capastan head 15 mm dia. weight should not be less than 550gm approved make including carriage of material within all leads and lifts. | 24 | Each | |
| 70 | 53 | Providing and fixing CP brass pillar tap with capstan head 15 mm dia weight should not be less than 550gm (approved Make) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 20 | Each | |
| 71 | 54 | Providing and fixing CP stop cock 15mm diaweight should not be less than 550gm .(approved Make) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 26 | Each | |
| 72 | 55 | Providing and fixing CP connection pipe with brass unions 30 cms length 15mm nominal size including carriage of material within all leads and lifts. | 22 | Each | |
| 73 | 56.01 | Providing and fixing brass full way valve with wheel including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. (1) 15mm nominal bore with Minimum Weight of 300 Gm. | 38 | Each | |
| 74 | 56.02 | II) 20mm nominal bore with Minimum Weight of 550Gm | 6 | Each | |
| 75 | 57.01 | Providing and fixing GI or MI union including carriage of material within all leads and lifts. (1)15mm nominal size | 16 | Each | |
| 76 | 57.02 | II) 20mm Nominal size | 12 | Each | |
| 77 | 58 | Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 8 | Each | |
| 78 | 59 | Providing and fixing laboratory sink with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings Vitreous china 600mm x 450mm x 150mm including carriage of material with in all leads and lifts | 6 | Each | |
| 79 | 60 | Providing and fixing PVC water storage tank double core 1000 ltr net capacity complete in all respect. Sintex make weight not less than 22 kg. including necessary fittings including carriage of material within all leads and lifts. | 3 | Each | |
| 80 | 61 | Providing laying (to level and slopes) and jointing reinforced concrete light duty non pressure pipe IS class NP-2 of following internal diameter with collar joints including testing of joints completes. 150 mm dia including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 100 | Rmt | |
| 81 | 62 | Providing and fixing Zet connection complete in all respect 15 mm Dia including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 5 | Each | |
| 82 | 63 | Providing and fixing white glazed fire clay stall urinal of 1150mmx500mm size of approved Make including carriage of material within all leads and lifts. | 3 | Each | |
| 83 | 64 | Providing and fixing plastic seat ( Solid/ Hollow type) and cover for wash down water closet with C.P brass hinges and rubber buffers including carriage of material within all leads and lifts. White plastic seat and cover. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 5 | Each | |
| 84 | 65 | Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material with in all leads and lifts | 3 | Each | |
| 85 | 66 | Providing and fixing stainless steel ( Grade 304) railing/ made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, including carriage of material with in all leads and lifts | 711 | Kg. | |
| 86 | 67 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 2645.03 | Sqm. | |
| 87 | 68 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material with in all leads and lifts | 20 | Sqm. | |
| 88 | 69 | Providing and Laying of Interlocking Concrete Blcok Pavements having thickness 60 mm ISI Marked as per drawing and Technical Specification Clause 1504 including carriage of material with in all leads and lifts | 211 | Sqm. | |
| 89 | 70 | Providing and fixing on wall face PVC(D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqmincluding filling the joints withapproved adhesive complete. 100mm dia pipes including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 95 | Rmt | |
| 90 | 71 | Providing and fixing M.S .holder batclamps of approved design to C.I.or S.C.I pipes embeded in andincluding cement concrete blocks 10x10x10 cm of 1:2:4:mix (1 cement 2sand 4 stone graded stone aggregate20 mm nominal size) and cost ofcutting holes and making good the 100 mm diametre including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 21 | Each | |
| 91 | 72 | Cement concrete pavement with 1:2:4 (1 cement :2 sand :4 stone aggregate 20 mm nominal size) including finishing with a floating coat of neat cement complete including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 198.94 | Cum. | |
| 92 | 73 | Making chequers of approved pattern on cement concrete floors. steps. landings and pavements etc. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 1989.37 | Sqm. | |
| 93 | 74 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 275.3 | Rmt | |
| 94 | 75 | White washing with lime on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 2215.37 | Sqm. | |
| 95 | 76 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 22 | Each | |
| 96 | 77 | Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering in: Foundations and plinth including carriage of material with in all leads and lifts | 72.99 | Cum. | |
| 97 | 78 | Cement plaster skirting (upto 30cmheight) with cement morter 1:3 (1 cement:3 sand) finished with a floating coat of neat cement including rounding of junction with floor 15 mm thick. including carriage of material with in all leads and lifts | 43.05 | Sqm. | |
| 98 | 79 | Providing and fixing double steel windows side hung, top hung and fixed glazed and wire gauge of standard rolled steel section joints mitred and welded and manufactured or relevant ISI standard specification with 16x3.15mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm size in cement concrete 1:3:6 (1cement:3sand:6graded crushed stone aggregate 20mm nominal size with wooden steel plugs or screws rawl plug opr with fixing clips or with bolts and nuts as required including providing and fixing of projected lugs handles prestaged bolting and fixing 5mm thick glass panes with special metal putty of approved make for glazed windows and wire gauge of IS designation S.S. 85 G with metal beading complete and frame with ISLC 75mm x 40 mm size mild steelTee of 20mm x 12mm for fixing glass pans, angle size 20mm x 20mm and flat size 20mm of Z steel angle 20mm x 12mm or fixed portion as per standard drawings including priming coat of read lead paint and carriage of material within all leads and lifts and other incidential complete in all respect as per instruction of the weight of z section should not be less than 1.60 kg per mtr. including M.S handles and tower bolts required complete in all respect including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 61.68 | Sqm. | |
| 99 | 80 | Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grill including carriage of material with in all leads and lifts | 1058.4 | Kg | |
| 100 | 81 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 699.85 | Sqm. | |
| 101 | 82 | First class brick flooring laid dry and grouted with cement morter 1:4 (1 cement :4 sand) including finishing the joints flush. 11.2 cm.thick (using conventional brick) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 211.43 | Sqm. | |
| 102 | 83 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 96 | Cum. | |
| 103 | 84 | Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.63mm thick sheet including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 50 | Rmt | |
| 104 | 85 | Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain bend 100mm dia including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 36 | Each | |
| 105 | 86 | Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. 50 mm thick including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 310 | Sqm. | |
| 106 | 87 | Providing and fixing metal strips of 1.6 mm thickness at junctions with other floors: 38 mm wide aluminium, strips including carriage of material with in all leads and lifts | 23.98 | Sqm. | |
| 107 | 88 | Providing and laying damp proof course 38mm thick with cement concrete 1:2:4 (1 cement:2 sand:4 stone aggregate 12.5mm nominal size) and curing complete including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 26.63 | Sqm. | |
| 108 | 89 | Providing and fixing polycarbonatd tranparent sheet 1.20mm thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete with all accessories as required including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 128.71 | Sqm. | |
| 109 | 90 | Providing and fixing 1 mm thick M.S sheet sliding shutters with frame and diagonal braces or 40 mmx40mmx6 mm angle iron 3.15 mm M.S gusset plates at junctions and corners 25mm dia pulley, 40mm X40 mm X6mm angle and T.iron guide at the top and bottom respectively,including applying a priming coat of red lead paint including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 60 | Sqm. | |
| 110 | 91 | Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504 including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 150 | Sqm. | |
| 111 | 92 | Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 6 | Cum. | |
| 112 | 93 | Providing and Laying50 mm thick cement concrete flooring with metallic concrete hardner topping under layer of 35 mm thick cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consisting of mix 1:2 (1 cement hardner mix : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (4 parts of cement: 1 part of metallic floor handening compound of approved quality by weight) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 60 | Sqm. | |
| 113 | 94 | Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 9.25 | Sqm. | |
| 114 | 95 | Providing and fixing 27.5 centimetre long wire spring grade No.2 for rolling shutters including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 4 | Each | |
| 115 | 96 | Providing and fixing top cover for rolling shutters Shutters having width bolow 3.5 metre including carriage of material with in all leads and lifts | 4 | Rmt. | |
| 116 | 97 | Providing and fixing ball bearing for rolling shutters including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 4 | Each | |
| 117 | 98 | Rolling shutters operated by bevel gear box and crank handle exceeding 12.0 sq.m.and upto 25.0 sq.m in area(average say 18.5 sq.m) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. | 9.25 | Sqm. | |
| 118 | 99 | Providing and fixing 50 mm thick pre fabricated roofing panels made of Polyurethane Foam (PUF) Having Minimum density 40 kg/Cum sandwitched between 0.5 mm thick corrugated prepinted steel sheet at top and 0.5mm thick plain prepainted steel sheet at bottom i/c fixing with prepainted iron J or L hooks/ self driven rivets, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charge including carraige of material with in all leads and lifts. | 170.55 | Sqm. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
