| 1 | 1 | B/R work | BI01010001010000000000000515BI0100001112 | | |
|---|
| 2 | 2 | M & L for PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. | | 2 | CUM |
|---|
| 3 | 3 | Supply of Integral water proofing Compound ISI marked. | | 70 | KG |
|---|
| 4 | 4 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. | | 5.8 | CUM |
|---|
| 5 | 5 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) except bricks complete all as specified and directed. | | 2 | CUM |
|---|
| 6 | 6 | M&L for well seasoned 2nd class hard wood in scantling, wrought timber framed work complete all as specified and directed. | | 1.25 | CUM |
|---|
| 7 | 7 | M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed. | | 0.75 | CUM |
|---|
| 8 | 8 | S & F 2nd class hard wood plain fillets. square, rectangular or triangular in section,sectional area exe 13 sqcm & n.exe 25 sqcm clean sawn, secured with nails or brads complete all as specified and directed. | | 100 | RM |
|---|
| 9 | 9 | Fixing only 2nd class hard wood plain fillets. square, rectangular or triangular in section,sectional area exe 6 sqcm & n.exe 13 sqcm clean sawn, secured with nails or brads complete all as specified and directed. | | 100 | RM |
|---|
| 10 | 10 | S&F 2nd class hardwood plain solid straight chowkhats and frames framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. | | 0.25 | CUM |
|---|
| 11 | 11 | S&F structural steel work in roof trusses (framed), crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. | | 1200 | KG |
|---|
| 12 | 12 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed | | 800 | KG |
|---|
| 13 | 13 | S & F for anodised aluminium snap grid size (605x650) of frame work for false ceiling .complete all as specified and directed. | | 100 | SQM |
|---|
| 14 | 14 | S & F for hangers 6 mm dia. G I (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats mase out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40 mm long.complete all as specified and directed. | | 100 | SQM |
|---|
| 15 | 15 | S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'J' type cranked hook bolt and washer in roof, wall etc. with grade of zinc coating 275 complete all as specified and directed. | | 200 | SQM |
|---|
| 16 | 16 | S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. | | 50 | SQM |
|---|
| 17 | 17 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | | 695 | SQM |
|---|
| 18 | 18 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | | 100 | SQM |
|---|
| 19 | 19 | Ditto all as per Sl item No. 18.00 here-in-above but except sheet. (NOTE: Seviceable sheet obtained from demolition under Sl item No 50.00 here-in-before shall be reused under the item) | | 100 | SQM |
|---|
| 20 | 20 | S & F for 4 mm non asbestos fibre cement building boards(605x605) fixed in ceiling or laid/inserted to timber/GI/Aluminium framework with screw .complete all as specified and directed. | | 100 | SQM |
|---|
| 21 | 21 | S & F in repair for 4 mm non asbestos fibre cement building boards(605x605) fixed in ceiling or laid/inserted to timber/GI/Aluminium framework with screw .complete all as specified and directed. | | 150 | SQM |
|---|
| 22 | 22 | S & F in repair for 6 mm non asbestos fibre cement building boards(605x605) fixed in ceiling or laid/inserted to timber/GI/Aluminium framework with screw .complete all as specified and directed. | | 100 | SQM |
|---|
| 23 | 23 | M & L for 4mm thick plywood (no of ply 03), grade BWR, type BB fixed with nails to timber frame work on wall . complete all as specified and directed. | | 50 | SQM |
|---|
| 24 | 24 | M & L for 6mm thick plywood (no of ply 05), grade BWR, type BB fixed with nails to timber frame work on wall . complete all as specified and directed. | | 300 | SQM |
|---|
| 25 | 25 | M & L for 4mm thick plywood (no of ply 03), grade BWR, type BB fixed with nails to timber frame work in ceiling . complete all as specified and directed. | | 200 | SQM |
|---|
| 26 | 26 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x 600mm comprising of wall/cleat angle of size 25 x 25 x 0.35mm and main/cross tee of size 24 x 38 x 0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. | | 125 | SQM |
|---|
| 27 | 27 | M & L for 18/19mm block board grade 2 quality interior grade commercial type,fixed with screws to timber frame-work.complete all as specified and directed. | | 20 | SQM |
|---|
| 28 | 28 | M & L for 12mm block board grade 2 quality interior grade commercial type,fixed with screws to timber frame-work.complete all as specified and directed. | | 25 | SQM |
|---|
| 29 | 29 | M&L for rendering 15mm thick on fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand)\n[Note: WPC will be measured and paid separately)\n | | 450 | SQM |
|---|
| 30 | 30 | M & L for rendering 10mm thick plaster in cement mortar (1:4) on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand) | | 150 | SQM |
|---|
| 31 | 31 | Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. | | 500 | SQM |
|---|
| 32 | 32 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed. | | 450 | SQM |
|---|
| 33 | 33 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed. | | 150 | SQM |
|---|
| 34 | 34 | M&L for preparation of old painted surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. | | 300 | SQM |
|---|
| 35 | 35 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. | | 350 | SQM |
|---|
| 36 | 36 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed. | | 550 | SQM |
|---|
| 37 | 37 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | | 300 | SQM |
|---|
| 38 | 38 | M & L for preparation of old painted wooden surfaces of any description, n.exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | | 20 | X RM |
|---|
| 39 | 39 | M&L for preparing of new or old wooden surfaces of any description and girth, not otherwise described and treated with a coat of creosote oil complete all as specified and directed. | | 75 | SQM |
|---|
| 40 | 40 | M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc and applying two coats synthetic paint over a coat of red oxide primer complete all as specified and directed. | | 275 | SQM |
|---|
| 41 | 41 | M&L for preparation of old painted steel surface on roof (CGI/PGI) of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide. complete all as specified and directed. | | 100 | SQM |
|---|
| 42 | 42 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | | 100 | SQM |
|---|
| 43 | 43 | M&L for prepraration of old painted surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed. | | 150 | SQM |
|---|
| 44 | 44 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed. | | 7.8 | CUM |
|---|
| 45 | 45 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed. | | 2 | CUM |
|---|
| 46 | 46 | Dismantling timber scantlings 40 sq. cm and over in section, in unframed work and in any position complete all as directed. | | 2.25 | CUM |
|---|
| 47 | 47 | Ditto in fillets ,rails ,posts , rafters, purlins etc. in unframed work under 40 sq.cm in section. | | 200 | RM |
|---|
| 48 | 48 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. | | 20 | QTL |
|---|
| 49 | 49 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. | | 650 | SQM |
|---|
| 50 | 50 | Dismantling of galvanised plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thickness roof coverings and segregating serviceable sheet and stacking for reuse and removing unserviceable materials from site of work complete all as specified and directed. | | 1145 | SQM |
|---|
