Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-06-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-07-2021 |
| Name of Work : SPECIAL REPAIR TO BUILDING Nos. P-127, P-128 & P-129 AT HQ EAC (U), UNDER GE (I) (AF) SHILLONG | |||||
|---|---|---|---|---|---|
| Srl.No. | Item Description | Item Code / Make | Approx No of units reqd | Units | |
| 1 | 0 | Note : All unserviceable materials obtained out of demolition/dismantling/taking down (other than those for which credit catered under Schedule of credit) shall be disposed of outside MoD Land. Quoted rates against respective item shall deemed to include for same. | |||
| 2 | 1 | B/R ITEMS\nDemolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed. | 4 | Cubic\nMetre | |
| 3 | 2 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material complete all as directed. | 10.5 | Cubic\nMetre | |
| 4 | 3 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in roofs, floors (other than ground floors), beams, staircase, landings, chajjas and similar suspended work complete all as specified and directed. | 6.23 | Cubic\nMetre | |
| 5 | 4 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. | 50 | Square Metre | |
| 6 | 5 | Taking down chowkats with shutters (without taking off shutters from the frames) & removing from site area n.exc 1.5 Sqm each complete all as specified and directed. | 30 | EACH | |
| 7 | 6 | Taking down chowkats with shutters (without taking off shutters from the frames) & removing from site area exc 1.5 Sqm & n. exc 4.00 sqm each complete all as specified and directed. | 30 | EACH | |
| 8 | 7 | Taking down door shutter of any description & removing from site area not exc. 1 sqm each complete all as specified and directed. | 40 | Each Leaf | |
| 9 | 8 | Taking down door shutter of any description & removing from site area exc. 1 sqm & n.exc 2.00 sqm each complete all as specified and directed. | 15 | Each Leaf | |
| 10 | 8.1 | Taking down existing roof treatment including PCC padding over roof, removing complete layer of bitumen under PCC padding, cement mortar & felt cleaning the surface by hacking to receive plaster and removing demolished material outside MD land complete all as specified and directed. | 100 | Square Metre | |
| 11 | 9 | Dismantling plain or corrugated steel sheeting/galvalume sheet any guage, thickness including Nainital or similar pattern roof covering,complete all as specified and directed | 310 | Square Metre | |
| 12 | 10 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed. | 150 | Square Metre | |
| 13 | 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. | 534 | Square Metre | |
| 14 | 12 | Taking down cement or cement lime plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish off the premises, complete all as directed. | 150 | Square Metre | |
| 15 | 13 | Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beeds complete all as specified and directed. \n\n | 25 | Square Metre | |
| 16 | 14 | Taking up or down steel tubing and connections alongwith bib tap, stop cocks and other fittings including cleaning for refixing or removal complete all as specified and directed :- | |||
| 17 | 14.1 | 15mm bore. | 100 | Running\nMetre | |
| 18 | 14.2 | 20mm bore. | 80 | Running\nMetre | |
| 19 | 15 | Dismantling water tank of capacity exceeding 250 Ltrs but not exceeding 500 Ltrs and removal from site complete all as specified and directed . | 4 | EACH | |
| 20 | 15.1 | Dismantling of any bore PVC(SWR) drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. \n(Note :- The length shall be measured along the centre line including fittings and accessoires). | 60 | Running\nMetre | |
| 21 | 16 | M & L for PCC 1:7:12 type F-2 using 40 mm graded crushed stone aggregate as in foundation, filling under floor, in sunken floors etc complete all as specified and directed. | 5 | Cubic\nMetre | |
| 22 | 17 | M&L for pre-cast cement concrete block masonry 1:3:6 Type C-1 using 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed. | 4 | Cubic\nMetre | |
| 23 | 18 | Supply only integral water proofing liquid complete all as directed. | 5 | Litre | |
| 24 | 19 | M & L for cutting holes into stone walls built in cement mortar or in cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 exc. half brick but not exc.one brick complete all as directed. | 320 | EACH | |
| 25 | 20 | M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads section area exc 06 Sqcm but n.exc 13 Sqcm complete all as specified and directed. | 360 | Running\nMetre | |
| 26 | 21 | M & L for second class soft wood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed. | 50 | Square Metre | |
| 27 | 22 | M & L for second class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. | 2 | Cubic\nMetre | |
| 28 | 23 | S & F 35mm thick IInd Class Hard wood, plain framed, panelled door shutters, two panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces (as ordered). The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I). Wood used shall be kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. | 30 | Square Metre | |
| 29 | 24 | S & F 30mm thick glazed and skeleton door shutters open rebated of second class hard wood rail and styles, prepared to receive glass/gauge etc divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I). Wood used shall be kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.\n(Note :- S & F Glass/gauge shall be measured and paid for separately) | 30 | Square Metre | |
| 30 | 25 | S & F 25mm thick glazed and skeleton door shutters open rebated of second class hard wood rail and styles, prepared to receive glass/gauge etc divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I). Wood used shall be kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.\n(Note :- S & F Glass/gauge shall be measured and paid for separately) | 25 | Square Metre | |
| 31 | 26 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with mild steel square tube, In opening complete all as per specifications and drawings as applicable to item 08095 given in SSR Part – II (2010). | 120 | Running\nMetre | |
| 32 | 27 | S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part–II. | 30 | Square Metre | |
| 33 | 28 | S & F butt hinges, medium weight, colled rolled mild steel & ISI marked complete all as specified and directed for following sizes:- | |||
| 34 | 28.1 | 75 mm long. | 80 | EACH | |
| 35 | 28.2 | 100mm long. | 90 | EACH | |
| 36 | 29 | S & F 100mm long stainless steel butt hinge ISI marked complete all as specified and directed. | 60 | EACH | |
| 37 | 30 | S & F 100mm long aluminium anodized barrel tower bolt of extruded section ISI marked complete all as specified and directed. | 80 | EACH | |
| 38 | 31 | S & F 150mm long aluminium anodized barrel tower bolt of extruded section ISI marked complete all as specified and directed. | 100 | EACH | |
| 39 | 32 | S & F 100mm size extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed. | 80 | EACH | |
| 40 | 33 | S & F 150mm size extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed. | 100 | EACH | |
| 41 | 34 | M&L for 100mm size hasp and staple, mild steel safety type, stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and directed. | 20 | EACH | |
| 42 | 35 | S & F 300 mm long aluminium alloy, anodised sliding door bolts, plate type with bolt not less than 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy and fixed complete all as directed. | 20 | EACH | |
| 43 | 36 | S & F in repairs continuous (Piano) hinges width of flaps (when open) 30mm, MS, bright finish or electro galvanised complete all as specified and directed. | 40 | Running\nMetre | |
| 44 | 37 | S & F in repairs aluminium (Die cast) body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as directed. | 10 | EACH | |
| 45 | 38 | S & F 140mm (overall length of cover plate), floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. | 30 | EACH | |
| 46 | 39 | S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. | 30 | Square Metre | |
| 47 | 40 | S & F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. | 30 | Square Metre | |
| 48 | 41 | S & F in repairs for powder coated stainless steel drapery rod of 20mm inner dia (in length as directed) of approved colour with and inlcuding decorative finial at both ends and pair of power coated mild steel brackets fixed at both ends fixed with PVC rawl plug and steel screws on walls/beam complete all as specified and directed. | 50 | Running\nMetre | |
| 49 | 42 | M & L for mild steel work conforming to Fe-290 Gde E-165 as in hold fast of flat iron bands, straps, supports or stays for rain water, ventilating pipes cut to length, bend to shap including bolts if required and wall tie, clamps etc., and including preparing surfaces and treated with tar and sanded with clean sharp sand complete all as specified and directed. | 65 | Kilogram | |
| 50 | 43 | M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. | 50 | Kilogram | |
| 51 | 44 | S & F in repairs chromium plated brass tubular towel rail 20 mm dia, D type 60 cm long between flanges complete all as directed. | 10 | EACH | |
| 52 | 45 | Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) anodized aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed. | 70 | Kilogram | |
| 53 | 46 | Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) aluminium door shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/RM including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated anodised aluminium snap beading, screws, powder coated aluminium fittings, such as handle (01 No for each leaf) etc complete all as specified and directed. \n(Note :- Glazing/wire mesh shall be measured and paid separately under respective items of Schedule.) | 20 | Square Metre | |
| 54 | 47 | S & F for pre-painted galvalume aluminum zinc coating GI based trapizoidal profile steel sheet 0.50mm thick (overall) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions complete all as specified and directed. | 250 | Square Metre | |
| 55 | 48 | S & F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (overall) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions completed all as specified and directed. | 60 | Square Metre | |
| 56 | 49 | S & F 4mm thick non-asbestos fibre cement building board, fixed to timber framework with screws as in ceiling complete all as specified and directed. | 150 | Square Metre | |
| 57 | 50 | S & F of UPVC casement ventilator / windows with outer frame in the size of 62mm width & 58mm height and sash frame in the size of 62mm width & 75mm height with suitable reinforcement (1.2mm thick), hardware, EPDM gasket etc with 5mm thick clear tempered glass of ISI marked and expansion gap on the edges is to be sealed with weather silicon sealant from outside and paintable sealant from inside and the outer frame is to be fixed on the wall surface using nylon anchor sleeve in the size of 80x8mm complete all as specified and directed. | 10 | Square Metre | |
| 58 | 51 | S & F in repairs 18/19 mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination and alround covered with 6mm thick teak wood beading/lipping fixed with screwed to timber frame complete all as directed. | 40 | Square Metre | |
| 59 | 52 | M & L for 12mm thick prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, pelmet boxes or in narrow width n.exc 15 cm each rebeted or flat edged fixed with screws to timber frame work including external teak wood lipping, 6mm thick fixed with nails completed all as specified and directed. | 30 | Square Metre | |
| 60 | 53 | S & F 30mm thick second class hardwood boarding, planed both sides, fixed with screws to timber frame/fixed to iron frame work/fixed to aluminium frame as in covering, partitions, shelves, cup board or similar items complete all as specified and directed. | 15 | Square Metre | |
| 61 | 54 | M & L for 25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in flooring and finished even and smooth without using extra cement complete all as specified and directed. | 25 | Square Metre | |
| 62 | 55 | M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:3, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as directed.\n(Note : Water proofing liquid shall be measured and paid separately) | 50 | Square Metre | |
| 63 | 56 | Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.5 Kg/Sqm , black finish reinforced with non-woven polyester reinforcement matt, with a thermo fusable finish laid over compatible cold emulsion bituminous primer applied at the rate of 0.40 Kg/Sqm by torching with a propane or a butane gas torch, with a overlap of 75mm on longitudinal direction and 100mm on transverse direction including sealing all as per manufacturer’s instructions complete all as directed.\nNote: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm. \n(ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. \n(iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. \n(iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen \n(v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 100 Gms/Sqm. \n(vi) Above aspects are deemed to be included in quoted rate. | 100 | Square Metre | |
| 64 | 57 | M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed. | 354 | Square Metre | |
| 65 | 58 | M & L for 100mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in paths, pavings and hardstanding top exposed surface finished even and smooth without using extra cement complete all as specified and directed. | 80 | Square Metre | |
| 66 | 59 | M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. | 80 | Square Metre | |
| 67 | 60 | M & L vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. | 200 | Square Metre | |
| 68 | 61 | M & L 16-18 mm thick granite slab/tiles (of any type table rubbed and polished) in steps jambs pillars, window cills, cooking platforms and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with complete all as specified and directed. | 30 | Square Metre | |
| 69 | 62 | M & L Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed. | 30 | Running\nMetre | |
| 70 | 63 | M & L for 50mm thick PCC 1:3:6 , type C-1 using 20 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 2 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed. | 50 | Square Metre | |
| 71 | 64 | M & L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed. | 30 | Square Metre | |
| 72 | 65 | M & L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado complete all as specified and directed. | 190 | Square Metre | |
| 73 | 66 | M & L for rendering 15 mm thick on fair faces of brick masonry/ concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed. | 70 | Square Metre | |
| 74 | 67 | M & L for rendering 15 mm thick CM (1:4) mixed with using water proofing liquid @ 150 ml per bag of cement on external surface of brick or concrete and finished the surface even smooth without using extra cement complete all as specfified and directed.\n(Note :- Supply only WPC shall be measured and paid separately) | 90 | Square Metre | |
| 75 | 68 | M & L for glazed ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as on vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. | 50 | Square Metre | |
| 76 | 69 | M & L for glazed ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as on vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. | 90 | Square Metre | |
| 77 | 70 | M & L for cement conctrete pre-polished chequered coloured paver tiles of size 305x305x25mm thick of approved colour and design as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. | 74 | Square Metre | |
| 78 | 71 | M & L for joint less, coloured light shade vitrified ceramic tiles (square/rectangular), 10 mm thick (Premium quality), area of each tiles not exceeding 0.36 sqm, as on vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. | 40 | Square Metre | |
| 79 | 72 | S & F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all specified and as directed. | 25 | Square Metre | |
| 80 | 73 | M & L for preparing newly plastered surfaces and applying three coats of white wash on ceiling/soffits of chajjas complete all as specified and directed.\n | 30 | Square Metre | |
| 81 | 74 | M & L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1mm thick wall care putty complete all as directed.\n(Make : For wall putty- Birla white/Bison wall putty of Berger/Narolac wall putty/Asian paint powder putty /Acro wall guard.) | 70 | Square Metre | |
| 82 | 75 | M & L for preparing old plastered surfaces of wall and applying one coat of oil bound distemper complete all as per specified and directed. | 4000 | Square Metre | |
| 83 | 76 | Material and labour for preparation of newly plastered surfaces of wall, applying a coat of 1mm thick wall care putty and applying two coats of weather proof acrylic paint over one coat of exterior grade acrylic primer complete all as specified and directed.\nMake-Apex Ultima of Asian, weather shield MAX of ICI/Dulux, weather coat long life of Beger, Acroguard 3X of Acro paint. | 50 | Square Metre | |
| 84 | 77 | M & L for preparing old or previously treated walls surfaces by brooming down or with steel wire brushes, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of water based acrylic antifungal/weather proof exterior emulsion paint on walls complete all as specified and directed.\n(Make-Apex Ultima of Asian, weather shield MAX of ICI/Dulux, weather coat long life of Beger, Acroguard 3X of Acro paint, Excel Total of Nerolac.) | 2500 | Square Metre | |
| 85 | 78 | M & L for preparation of old painted wooden or wood based surfaces of any description not otherwise described n exc 10 cm width or girth and applying one coat of synthetic enamel paint of 1st grade quality complete all as specified and directed. | 800 | Square Metre | |
| 86 | 79 | M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of 1st grade quality complete all as specified and directed. | 400 | Square Metre | |
| 87 | 80 | M & L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of 1st grade quality over and including one coat of pink primer complete all as specified and directed. | 165 | Square Metre | |
| 88 | 81 | M & L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality over and including one coat of red oxide zinc chrome primer complete all as specified and directed. | 20 | Square Metre | |
| 89 | 82 | M & L for treating sunken floor surfaces with two coats (one priming coat and one finishing coat) of water proofing chemical PIDIFIN 2K of Dr Fixit (or any other brand approved by GE) all as per Manufacturer's instructions complete all as specified and directed. | 40 | Square Metre | |
| 90 | 83 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed for following sizes:- | |||
| 91 | 83.1 | 75mm bore | 10 | Running Metre | |
| 92 | 83.2 | 110mm bore | 20 | Running Metre | |
| 93 | 84 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed for following sizes:- | |||
| 94 | 84.1 | 110mm bore | 30 | Running Metre | |
| 95 | 85 | S & F PVC (SWR) bend of any radius complete all as specified for following sizes:- | |||
| 96 | 85.1 | 110mm bore | 5 | EACH | |
| 97 | 86 | S & F PVC (SWR) vent cowl for 110 mm bore of pipe complete all as specified and directed. | 5 | EACH | |
| 98 | 87 | S & F PVC (SWR) WC connector with lip ring for 110 mm bore of pipe complete all as specified and directed. | 5 | EACH | |
| 99 | 88 | S & F in repairs PVC (SWR) floor trap 75mm dia outlet plain with Stainless steel grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as directed. | 5 | EACH | |
| 100 | 89 | S & F stack clamps for 110mm bore pipe out of 50mm X 5mm flat iron and 16mm dia round iron stays, including bolts & nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-Charge. | 10 | EACH | |
| 101 | 90 | S&F steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed for following sizes:- | |||
| 102 | 90.1 | 15mm bore. | 100 | Running\nMetre | |
| 103 | 90.2 | 20mm bore. | 80 | Running\nMetre | |
| 104 | 91 | S & F 15 mm dia cast copper alloy Chromium plated two way Bib cock with wall flange concealed type screwed down for iron pipe or for unions complete all as specified and directed. \n(Product Code & Make :- Cat Part No.- 8712 of Make Prayag or equivalent model of other makes listed in list of makes). | 10 | EACH | |
| 105 | 91.1 | S & F 15mm bore stop valve cast copper alloy chromium plated, fancy type screwed down high pressure long shank and cup concealed type with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. | 10 | EACH | |
| 106 | 92 | S & F Pillar tap 15mm dia fancy type with capstan head chromium plated screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nut complete all as specified and directed. | 15 | EACH | |
| 107 | 93 | S & F 15 mm dia cast copper alloy Chromium plated Angle valves, with wall flange concealed type screwed down for iron pipe or for unions complete all as specified and directed. \n(Product Code & Make :- Cat Part No.- 8710 of Make Prayag or equivalent model of other makes listed in list of makes). | 10 | EACH | |
| 108 | 94 | S & F in repair 15 mm dia Brass CP, wall mixer 3 in 1 system with provision for both hand and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange (without Hand and overhead shower) (Concealed type) screwed both ends for iron pipe or for unions complete all as specified and as directed. \n(Product Code & Make :- Cat Part No CON-281KN of JAQUAR or equivalent model of KOHLAR/Roca) | 10 | EACH | |
| 109 | 95 | S & F in repairs 15mm bore sink mixture for mixing hot and cold water chromium plated fancy type with swinging casted spout (wall mounted model) with connecting legs & wall flanges two joints to steel pipe or union and plugging/screwing to wall complete all as specified and as directed.\n(Product Code & Make :- Cat Part No CON-309KN of JAQUAR or equivalent model of KOHLAR/Roca) | 10 | EACH | |
| 110 | 96 | S & F in repairs 15mm bore central hole Basin mixture for mixing hot and cold water chromium plated fancy type without popup waste system with 450mm long barided hoses complete all as specified and as directed.\n(Product Code & Make :- Cat Part No CON-167KNB of JAQUAR or equivalent model of KOHLAR/Roca) | 5 | EACH | |
| 111 | 97 | S & F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm including one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed complete including cutting for and pinning in ends of bracket or erecting stand complete all as directed. | 5 | EACH | |
| 112 | 98 | S & F in repairs vitreous China squatting pan (Orissa pattern) water closet (white) of size 580 mm x 440 mm with integral foot rests, 'P' or 'S' trap, including connection to trap, flushing pipe and antisyphonage pipe etc and including provision of PCC (1:5:10) type E-2 lean concrete in filling, making good to floor (excluding flushing cistern and flush pipe etc) complete all as specified and directed. | 5 | EACH | |
| 113 | 99 | S & F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed. | 10 | EACH | |
| 114 | 100 | S & F in repairs plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. | 10 | EACH | |
| 115 | 101 | S & F in repairs white Vitreous china wash down water closet pan (pedestal pattern) with integral S trap including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.\n(Product Code & Make :- Cat Part No CNS-WHT-WH-10 of JAQUAR or equivalent model of other makes listed in list of makes). | 5 | EACH | |
| 116 | 102 | S & F in repairs Hand Shower (Health Faucet) with 8mm dia 1 metre long flexible tube with wall hook complete all as specified and as directed. \n(Product Code & Make :- Cat Part No ALD-573 of JAQUAR or equivalent model of KOHLAR/Roca) | 10 | EACH | |
| 117 | 103 | S&F in repairs chromium plated toilet paper holder with stainless steel flap complete all as specified and directed. \n(Product Code & Make :- Cat Part No ACN-1153S of JAQUAR or equivalent model of other makes listed in list of makes). | 10 | EACH | |
| 118 | 104 | S & F in repair Stainless steel Towel rack 600mm long with lower hangers, fixed to walls with brass screws complete all as specified and directed. \n(Product Code & Make :- Cat Part No ACN-1181S of JAQUAR or equivalent model of other makes listed in list of makes). | 10 | EACH | |
| 119 | 105 | S & F in repairs Overhead Shower 150mm x 150mm square shape single flow ABS body Chrome plated with gray face plate with rubit cleaning system including provision of 450mm long chromium plated best quality shower arm complete all as specified and as directed. \n(Product Code & Make :- Cat Part No OHS-35495 of JAQUAR or equivalent model of KOHLAR/Roca) | 10 | EACH | |
| 120 | 106 | S & F in repairs PTMT alloy toilet cabinet with mirror of overall size 622 x 422mm and fixed to wall complete all as specified and directed. \n(Product Code & Make :- Cat Part No. 556 of Make Prayag or equivalent model of other makes listed in list of makes). | 9 | EACH | |
| 121 | 107 | S&F in repair corner glass self of size 300mm radius (with brass chromium plated brackets) fixed in the walls with necessary screws etc. complete all as specified and directed. \n(Product Code & Make :- Cat Part No. BEA-44 of Make Prayag or equivalent model of other makes listed in list of makes). | 9 | EACH | |
| 122 | 108 | S & F in repair chromium plated 32mm size waste coupling, full threaded with height 80mm complete all as specified and directed. \n(Product Code & Make :- Cat Part No ALD-705 of JAQUAR or equivalent model of other makes listed in list of makes). | 5 | EACH | |
| 123 | 109 | M & L for gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm dia complete all as specified and directed. | 10 | EACH | |
| 124 | 110 | S & F in repairs grating doom 125 mm dia of PTMT (minimum weight 40 gms), complete all as specified and directed. | 20 | EACH | |
| 125 | 111 | S & F in repairs PVC connection pipe 15mm dia with PTMT nuts of length 600mm complete all as specified and directed. | 15 | EACH | |
| 126 | 112 | S & F in repairs kitchen sink (without drainage board) made of stainless steel 1 mm thick sheet with plug washer and waste coupling including bedding in cement mortar to dwarf wall or including and fixing cantilever brackets and connecting union pipe overall size 495mm x 420mm and bowl size 410 x 330 x 160mm complete all as directed. | 10 | EACH | |
| 127 | 113 | S & F 500 litres capacity rotational moulded HDPE water storage tank tripple layer (Cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. \nNote : PVC tanks shall be ISI marked and having two layers. | 4 | EACH | |
| 128 | 114 | M & L for writing letters, figures, index, arrows etc not exc 30cm in height using 1st quality synthetic enamel paint of colour as directed on PCC/PVC water tanks completed all as specified and directed. | 280 | PER 10 NOS PER CM HEIGHT | |
| 129 | 115 | M & L for disconnecting existing tanks, setting aside (or lowering if required) for cleaning etc and hosting if required, reconnectings and refixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc. for the capacity of tanks exceeding 250 and not exceeding 500 Litres complete all as specified and directed. | 10 | EACH | |
| 130 | 116 | S & F 20mm dia, ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. | 4 | EACH | |
| 131 | 117 | S & F in repairs 20mm dia, ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. | 10 | EACH | |
| 132 | 118 | S & F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. | 20 | EACH | |
| 133 | 118.1 | S & F in repairs Hand Shower of 95mm dia round shape multi flow with 8 mm dia and 1.00 mtr long flexible tube and wall hook complete all as directed. \n(Product Code & Make :- Cat Part No HSH-1739 of JAQUAR or equivalent model of KOHLAR/Roca)\n(Note : The contractor shall deposit with Engineer-in-Charge these original purchase voucher and product guarantee/warrantee certificate in original for the period as per policy in vogue of manufacturer to obtain service from manufacturer during the period of guarantee/warrantee.) | 10 | EACH | |
| 134 | 119 | E/M ITEMS\nTaking down carefully copper/aluminium point wiring (light, fan, socket or power) complete from existing conduits, from PVC Casing/capping with all fittings, such as switches, ceiling rose, pendants, sockets, lamp holder, fan regulators, sketch/brackets light fittings (except tube light fitting) etc and removal of old material from site (except switches, sockets and fittings to be reused) and making good disturbed surfaces of walls, floors ceiling etc complete all as specified and directed to match with existing surfaces. | 632 | PER POINT | |
| 135 | 120 | Taking down main switch/DB’s including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete all as directed. | 19 | EACH | |
| 136 | 121 | Taking down old tube light fittings/light fittings/security lights any type and removal of old light fittings from site (except light fittings to be reused) and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed to match with existing surfaces. | 336 | EACH | |
| 137 | 122 | Taking down the existing unserviceable submain/service connection wiring any size and any description including conduits all as directed. | 230 | Running Metre | |
| 138 | 122.1 | Taking out old unserviceable LT UG cable of size 4.0 core 50 Sqmm laid in trenches, ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including removal of cable protection cover, GI tubing etc complete all as specified and directed.\n(Note :- Excavation & earth work, shall be measured and paid for seprately under respective items of the BOQ ) | 100 | Running\nMetre | |
| 139 | 123 | M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through PVC rigid non metallic conduit (minimum 20mm bore size) and conduit accessories concealed in walls/ceiling/floors all as per IS including sunk type pressed steel terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite sheet top cover for mounting switches, sockets, regulators, bell push etc, including 1.5 Sq.mm solid copper conductor with green PVC FRLS-H insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly for the following :-\n(Note : The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces. ) | |||
| 140 | 123.1 | One light/fan point controlled by one, one way switch. | 200 | PER POINT | |
| 141 | 123.2 | One light point controlled by two Nos, two way switches. | 8 | PER POINT | |
| 142 | 123.3 | One bell point controlled by one bell push | 3 | PER POINT | |
| 143 | 123.4 | One 5 Amps socket outlet/switch socket outlet on independent board. | 24 | PER POINT | |
| 144 | 123.5 | One 5 Amps socket outlet/switch socket outlet on same board with other switches. | 40 | PER POINT | |
| 145 | 124 | M & L for point wiring complete for 15 Amps socket outlet on independent board with 4.0 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through and including PVC rigid non metallic conduit (minimum 25mm bore size) and conduit accessories concealed in walls/ceiling/floors all as per IS with MS concealed terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite sheet top cover for mounting switches, sockets, including 4.0 Sq.mm multistranded copper conductor with green PVC FRLS-H insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly. \nNote : (i) The rates for concealed type wiring shall deemed to include the cost of cutting chases in the wall and makeing good the disturbuted surfaces of wall. \n(ii) For Geyser/AC point wiring socket shall be provided near Geyser/AC and switch shall be provided near gate or any other location as directed. | 40 | PER POINT | |
| 146 | 125 | M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through existing conduit and conduit accessories any type concealed in walls/ceiling/floors all as per IS including sunk type pressed steel terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite sheet top cover for mounting switches, sockets, regulators, bell push etc, including 1.5 Sq.mm solid copper conductor with green PVC FRLS-H insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly for the following :-\n(Note : The rate quoted shall deemed to include for making good disturbed surfaces. ) | |||
| 147 | 125.1 | One light/fan point controlled by one, one way switch. | 168 | PER POINT | |
| 148 | 125.2 | One light point controlled by two Nos, two way switches. | 8 | PER POINT | |
| 149 | 125.3 | One bell point controlled by one bell push | 3 | PER POINT | |
| 150 | 125.4 | One 5 Amps socket outlet/switch socket outlet on independent board. | 32 | PER POINT | |
| 151 | 125.5 | One 5 Amps socket outlet/switch socket outlet on same board with other switches. | 40 | PER POINT | |
| 152 | 126 | M & L for point wiring complete for 15 Amps socket outlet for Geysers on independent board with 2.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through existing conduit and conduit accessories any type concealed in walls/ceiling/floors all as per IS including sunk type pressed steel terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite sheet top cover for mounting switches, sockets, including 2.5 Sq.mm multistranded copper conductor with green PVC FRLS-H insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly. \nNotes : (i) The rate quoted shall deemed to include for making good disturbed surfaces. \n(ii) For Geyser/AC point wiring socket shall be provided near Geyser/AC and switch shall be provided near gate or any other location as directed. | 10 | PER POINT | |
| 153 | 127 | M & L for point wiring complete for 15 Amps socket outlet for Geysers on independent board with 4.0 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through existing conduit and conduit accessories any type concealed in walls/ceiling/floors all as per IS including sunk type pressed steel terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite sheet top cover for mounting switches, sockets, including 4.0 Sq.mm multistranded copper conductor with green PVC FRLS-H insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly. \nNotes : (i) The rate quoted shall deemed to include for making good disturbed surfaces. \n(ii) For Geyser/AC point wiring socket shall be provided near Geyser/AC and switch shall be provided near gate or any other location as directed. | 56 | PER POINT | |
| 154 | 128 | M & L for modular metal flush box for the following modules :-\n | |||
| 155 | 128.1 | 1 or 2 Module | 170 | EACH | |
| 156 | 128.2 | 3 Module | 240 | EACH | |
| 157 | 128.3 | 4 Module | 20 | EACH | |
| 158 | 128.4 | 6 Module | 60 | EACH | |
| 159 | 129 | M & L for modular white cover plate with frame for the following modules :-\n | |||
| 160 | 129.1 | 1 Module | 40 | EACH | |
| 161 | 129.2 | 2 Module | 130 | EACH | |
| 162 | 129.3 | 3 Module | 240 | EACH | |
| 163 | 129.4 | 4 Module | 20 | EACH | |
| 164 | 129.5 | 6 Module | 60 | EACH | |
| 165 | 130 | S & F modular switch, 1 way 6A, 240 Volts, 1 module complete all as specified and directed. | 524 | EACH | |
| 166 | 131 | S & F modular switch, 2 way 6A, 240 Volts, 1 module complete all as specified and directed. | 12 | EACH | |
| 167 | 132 | S & F modular bell push, 1 way 6A, 240 Volts, 1 module complete all as specified and directed. | 16 | EACH | |
| 168 | 133 | S & F, modular socket outlet for two and three pin combined, 6 Amp, 240 Volts, 2 Module type complete all as specified & directed. | 156 | EACH | |
| 169 | 134 | S & F switch socket combination two-in-one (multipurpose), 6 pin, 16 Amp, 3 module, modular type, universal 240 Volts complete all as specified & directed.\n | 96 | EACH | |
| 170 | 135 | S & F bell Ding-dong type, AC, 230 Volts, single pole complete all as specified & directed. | 16 | EACH | |
| 171 | 136 | S & F lamp holder, PVC / polycarbonate type with back plate suitable for Angle fittings complete all as specified and directed. | 80 | EACH | |
| 172 | 137 | S & F ceiling rose, three terminal, PVC / poly carbonate isolated body, complete all as specified and directed. | 320 | EACH | |
| 173 | 138 | Supply and fix LED tube light fitting, 18 Watt 230 V, 50 Hz with with all standard fittings etc pre-wired including LED tube and connecting the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. \n{Model/Make : Cat Part No BCLSB 18NW of make Bajaj or equivalent model of makes listed in List makes}. | 208 | EACH | |
| 174 | 139 | Supply and fix LED tube light fitting, baton integrated LED channel 10 Watt 230 V, 50 Hz with with all standard fittings etc pre-wired including LED tube, colour temperature neutral white and connecting the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. \n{Model/Make : Cat Part No BCLSB 10 NW of make Bajaj or equivalent model of makes listed in List makes}. | 88 | EACH | |
| 175 | 140 | Supply and fix opal glass & chrome finish 1x7W E27 LED wall lamp of dimensions 150x120x250mm complete all as specified and directed. \n{Model/Make : Cat Part No. KCH-CHR-MB160275541A of make Jaquar or equivalent model of makes listed in List makes}. | 40 | EACH | |
| 176 | 141 | S & F sheet metal enclosure double door DB SPN 8 way, 240 volts protection class IP-43 made out of CRCA mild steel sheet surface with epoxy powder coated surface confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed. | 8 | EACH | |
| 177 | 142 | S & F sheet metal enclosure double door DB SPN 12 way, 240 volts protection class IP-43 made out of CRCA mild steel sheet surface with epoxy powder coated surface confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed. | 8 | EACH | |
| 178 | 143 | S & F sheet metal enclosure vertical type double door DB TPN 4 way suitable to accomodate MCCB FP, 415 volts upto 160 Amps rating, protection class IP-54 IK-09 made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted as per IEC 61439-3, with copper bus bar of 250 Amps capacity for each phase, with two neutralbars, two Earth bars and cable ties for cable managementall as specified and as approved by Engineer-in-Charge.\n{Model/Make : Cat Part No 5077 50 of make Legrand or equivalent model of makes listed in List makes}.\n(Note: MCCB & MCBs shall be measured and paid separately) | 3 | EACH | |
| 179 | 144 | S & F MCB SP 6 to 32 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I complete, all as specified & directed. | 198 | EACH | |
| 180 | 145 | S & F MCB SPN 40 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I, complete, all as specified & directed. | 15 | EACH | |
| 181 | 146 | S & F MCCB four pole 160 Amp confirming to IEC 60947-2 & IS – 13947-3 thermal magnetic release and adjustable over load setting 0.8 – 1.0 x In and adjustable short circuit setting 6 – 10 x In and rupturing capacity 36 KA at 415 V AC , 50 Hz | 3 | EACH | |
| 182 | 147 | S & F for submain wiring with 2 single core PVC insulated & PVC unsheathed FRLS-H cable 1100 Volt grade with 04 Sqmm copper multistranded conductor drawn through and including PVC conduit 20mm bore concealed in walls/ceilings/roofs including 4 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS-H cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. | 40 | RUNNING METRE | |
| 183 | 148 | S & F for submain wiring with 2 single core PVC insulated & PVC unsheathed FRLS-H cable 1100 Volt grade with 06 Sqmm copper multistranded conductor drawn through and including PVC conduit 20mm bore concealed in walls/ceilings/roofs including 6 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS-H cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.\nNote for item Nos. 147.00 & 148.00 : - (i) Two runs of main cable, one run of earth continuity conductor and one run of conduit will be measured and paid as one length only.\n(ii) The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces. | 40 | RUNNING METRE | |
| 184 | 149 | S & F for submain wiring with 2 single core PVC insulated & PVC unsheathed FRLS-H cable 1100 Volt grade with 04 Sqmm copper multistranded conductor drawn through existing conduit and conduit accessories any type on surface/concealed in walls/ceilings/roofs including 4 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS-H cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. | 70 | RUNNING METRE | |
| 185 | 150 | S & F for submain wiring with 2 single core PVC insulated & PVC unsheathed FRLS-H cable 1100 Volt grade with 06 Sqmm copper multistranded conductor drawn through existing conduit and conduit accessories any type on surface/concealed in walls/ceilings/roofs including 6 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS-H cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.\nNote for item Nos. 149.00 & 150.00 : - (i) Two runs of main cable and one run of earth continuity conductor will be measured and paid as one length only.\n(ii) The rate quoted shall deemed to include for making good disturbed surfaces. | 80 | RUNNING METRE | |
| 186 | 151 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed. | 16.2 | CUBIC METRE | |
| 187 | 152 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose soil complete all as specified and directed. | 7.92 | CUBIC METRE | |
| 188 | 153 | Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. | 8.28 | CUBIC METRE | |
| 189 | 154 | Supply/Laying / fixing, jointing, testing and commissioning of 4.0 core 50 Sqmm LT under ground cable 1100 volts grade XLPE insulated & PVC sheathed cable heavy duty armoured, with multistranded aluminium conductor laid in trenches/ ducts/ pipes/fixed on walls/poles complete all as specified and directed.\nNOTE :- (a) Excavation & earth work, shall be measured and paid for seprately under respective items of the BOQ.\n(b) GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid for seprately under respective items of the BOQ \n(c) Road cutting involved during excavation for laying of cables etc shall be made good as per existing road. Nothing extra shall be admissible on this account. Quoted rates of the item shall be inclusive of the above provisions. | 100 | RUNNING METRE | |
| 190 | 155 | M & L for dry sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed.\nNote :- Thickness after punning shall be considered for payment. | 8.28 | CUBIC METRE | |
| 191 | 156 | M & L for brick protection for UG XLPE cable with sub class 'B' bricks, old size laid dry and flat abutting each other with gaps between adjacent brick 10mm with width equal to length of brick in trenches across the cable complete all as directed. | 0.8 | PER 1000 NOS | |
| 192 | 157 | S & F 40 mm bore Galvanised steel tubing light grade for protection of under ground cable on poles / walls/under road crossing/laid in trenches etc conforming to IS-1239 complete all as directed. | 20 | RUNNING METRE | |
| 193 | 158 | M & L for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6 mm thick buried vertically in ground to depth not less than 2.25 metres deep below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to galvanized earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel besides welding at all joints as shown in drawing and including excavation and earth work, GI pipe light grade 15mm bore for protection of earth wire and connected to continous earth lead on pole/test point, supplying and laying charcoal dust common salt PCC 1:2:4 type B1, chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh, 20mm dia GI pipe medium grade for watering all as shown in electrical plate No 5 on srl page No 497 of SSR Part I (2009) drawing and connection to earth test point including testing and including dismantling and taking out old earthing complete all as specified and directed.\nNote : (i) The cost of earth lead /strip and GI pipe for protection of earth lead/strip upto 7.5m is included in the quoted rate. \n(ii) The cost of excavation, earth work is included in the quoted rate. | 6 | EACH\nJOB |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
