Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-06-2021 | Corrigendum | Date | 07-07-2021 |
| Name of Work: Balance work for construction of Modern Bus stand at Theog Tehsil theog Distt. Shimla, H.P. (SH:- Construction of building portion, W.S. & S.I , M/T in approach road , site development by providing P.C.C. Breast walls and construction foot path etc. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Cutting in earth work by mechanical means in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful materials and transportation of the unuseful materials for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ).All useful materials such as stones , shingles, aggregates, and slates shall be properly stacked at site to the maximum possible extent in all leads lifts through alll modes of transportion as per the direction of the Engineer -in- Charge/The recovery for stones ,received from cutting ,jumper work @ one /tenth ,soft rock @ one /sixth and hard roack one/third cubic metre @ 300/- only( Rupees three hundred ) per cubic metre shall be effected on prorata basis in all circumstances .Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall to be duly compensated by him in all respects including all incidental charges. | 500.4 | Per cubic meter | |
| 2 | 2 | Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful materials such as stones , shingles, aggregates, and slates shall be properly stacked at site to the maximum possible extent in all leads lifts through alll modes of transportion as per the direction of the Engineer -in- Charge/The recovery for stones ,received from cutting ,jumper work @ one /tenth ,soft rock @ one /sixth and hard roack one/third cubic metre @ 300/- only( Rupees three hundred ) per cubic metre shall be effected on prorata basis in all circumstances. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. | 700.57 | Per cubic metre | |
| 3 | 3 | Excavation in drain and channel in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful materials such as stones , shingles, aggregates, and slates shall be properly stacked at site to the maximum possible extent in all leads lifts through alll modes of transportion as per the direction of the Engineer -in- Charge/The recovery for stones ,received from cutting ,jumper work @ one /tenth ,soft rock @ one /sixth and hard roack one/third cubic metre @ 300/- only( Rupees three hundred ) per cubic metre shall be effected on prorata basis in all circumstances. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. | 62.1 | Per cubic meter | |
| 4 | 4 | Earth work in surface excavation in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful materials such as stones , shingles, aggregates, and slates shall be properly stacked at site to the maximum possible extent in all leads lifts through alll modes of transportion as per the direction of the Engineer -in- Charge/The recovery for stones ,received from cutting ,jumper work @ one /tenth ,soft rock @ one /sixth and hard roack one/third cubic metre @ 300/- only( Rupees three hundred ) per cubic metre shall be effected on prorata basis in all circumstances. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. | 1632.47 | Per cubic meter | |
| 5 | 5 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts. | 65.03 | Per cubic meter | |
| 6 | 6 | Providing form work with steel plates (3.15mm) three point fifteen milimetre thick welded with angle iron in frame (30x30x5mm) ( Thirty x thirty x five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden battens and ballies/steel props, height of propping and centering below supporting floor up to all floor and removal of the same for insitu-reinforced concrete and plain concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (i) Flat surfaces such as soffits of suspended floorss, roofs landing and the like including carriagee of materiialupto all leads and lifts and as per the direction of Engineer in charge | 36.31 | Per Square meter | |
| 7 | 6.01 | ( vi ) Edges of slabs and breaks in floors and wall: under 20 cm (Twenty centimetre) wide including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. | 36.6 | Running meter | |
| 8 | 7 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) All work up to plinth level Foundation and plinth including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge. | 1784.98 | Per cubic meter | |
| 9 | 8 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) All work up to plinth level including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge | 56.47 | Per cubic meter | |
| 10 | 9 | Providing and laying cement concrete in retaining walls, return walls, walls (any hickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, including the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge | 193.15 | Per Cubic meter | |
| 11 | 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in Foundation and plinth. including carriage of material with in all leads and lifts as per the direction of Engineer-in-charge | 19.04 | Per Cubic Meter | |
| 12 | 11 | Providing and laying cement concrete work 1:1½:3 (one cement : one and half sand : three graded stone aggregate 20 mm nominal size) (twenty millimeters nominal size) michamically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforced concrete work, including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (ii) Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor twolevel and above including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.(i ) Up to all floors and levels . | 4.62 | Per cubic metre | |
| 13 | 12 | Providing mild steel/tor steel reinforcement SAIL ,TISCO for reinforced cement concrete work including cutting, bending, binding and placing in position complete including cost of binding wire upto floor all level including carriage of materials upto all leads and lifts as per the direction of the Engineer-in-Charge.(i) Tor steel Up to all floors and levels . | 591.8 | Kg. | |
| 14 | 13 | Providing and laying autoclaved aerated Cement block masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 131.59 | Per cubic metre | |
| 15 | 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:mortar 1:6 (one cement : six sand) second class bricks complete including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge . | 10.89 | per cubic metre | |
| 16 | 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: including all leads and lifts as per direction of the Engineer-in-Charge Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge . | 11.73 | Per cubic metre | |
| 17 | 16 | Stone filling behind retaining walls/breast walls as per HPPWD specification 1990 (one thousand Nine hundred Ninety ) volume-I including carriage of mateiral in all leads and lifts and as per the direction of Engineer-in-Charge. | 33 | Per cubic metre | |
| 18 | 17 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 complete including hauling of in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge | 489.8 | Running meter | |
| 19 | 18 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately)12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade -1, Type II marked : including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge. | 82.45 | Per Square meter | |
| 20 | 19 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge . | 108.4 | Running meter | |
| 21 | 20 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge . 6 mm thick Cement fiber board as per IS:14862 | 314.63 | Per squre metre | |
| 22 | 21 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to openings /wooden frames with rawl plugs screws etc.including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge . | 2077.24 | Per Kg. | |
| 23 | 22 | Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on unexposed surface etc., completeincluding carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 34.8 | Per square meter | |
| 24 | 23 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete.300x16mm ( Three hundred into sixteen millimetre ) including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 2 | Nos. | |
| 25 | 23.01 | 250x16mm ( Two hundred fifty into sixteen millimetre) | 32 | Nos. | |
| 26 | 24 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads, lifts and other incidental charges.200x10mm (Two hundred fifty into ten millimeter) | 44 | Nos. | |
| 27 | 24.01 | 150x10mm (One hundredfifty into ten millimeter) | 264 | Nos. | |
| 28 | 25 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads, lifts and other incidental charges.125mm ( one hundred twenty five millimetre) | 60 | Nos. | |
| 29 | 25.01 | 75mm ( one hundred millimetre) | 96 | Nos. | |
| 30 | 26 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete.including carriage of materials within all leads, lifts and other incidental charges.90 mm | 48 | Nos. | |
| 31 | 27 | Providing and fixing oxidized M.S. hooks and eyes complete including carriage of materials within all leads, lifts and other incidental charges. | 264 | Nos. | |
| 32 | 28 | Providing and fixing cup board shelves/box with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, With decorative veneering on one side including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 88.08 | Per squre metre | |
| 33 | 29 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one sidedecorative lamination and other side balancinglamination, including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and brightfinished stainless steel piano hinges, complete including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge . | 34.8 | Per square meter | |
| 34 | 30 | Supplying and fixing expended metal to wood or steel members in partations weight exceeding 3 kg. And not exceeding 5 kg. Per sqm. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge | 611.1 | Per square meter | |
| 35 | 31 | Providng and laying cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.complete including all leads and lifts as per direction of the Engineer-in-Charge | 16.09 | Per Square meter | |
| 36 | 32 | Kota stone slab flooring with 20mm (twenty milimetre ) thick base of cement mortor 1:4 (one cement is to four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.. 25mm thick (twenty five mm thick ) | 664 | Per Square meter | |
| 37 | 33 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. including carriage of materials within all leads, lifts and other incidental charges . | 66.4 | Per square meter | |
| 38 | 34 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of materials within all leads, lifts and other incidental charges | 439.98 | per square meter | |
| 39 | 35 | Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of Light shade pigment using white cement:incliding rubbing and polishing complete with tiles of following shades including all leads and lifts as per direction of the Engineer-in-Charge. | 298 | per square meter | |
| 40 | 36 | Providing and laying heavy duty precast cement concrete pre polished inter locking paver blocks vibro compacted upto M-50 grade including border or kurb block grey or coloured over sub base of concrete with 25mm thick average thickness of cement mortar 1:4 ( 1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete( Sub base concrete floor to be paid for separately) including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. 80mm thick inter locked blocks. | 3615.71 | per square meter | |
| 41 | 37 | Providing and fixing 0.60mm thick Tata Durashine or equivelent of approved brand & shade and design prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with G.I. sheet drilling screws of required size prepainted to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-Charge.Tata make | 29.6 | per square meter | |
| 42 | 38 | Providing and fixing flushing 38 cm .overall with 0.45mm thick Tata Durashine or equivelents prepainted sheet of approved brand shade and design prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpetand bitumen washers complete with all accessories as required as per direction of the Engineer-in-Charge including carriage of materials upto all leads and lifts. | 37 | Per running metre | |
| 43 | 39 | Providing and fixing M.S B.P. sheet 2.00 mm( two milimetre) thick in eaves boards/ facia/ soffits and ceiling including cutting, welding to steel roof members and applying a coat of red lead p rimer etc. complete as per the instruction of Engineer in charge complete including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. | 37.15 | per square meter | |
| 44 | 40 | Providing and fixing on wall face PVC and trenches rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (i) 110mm diametre pipe | 56 | Per running metre | |
| 45 | 41 | Providing and fixing on wall faces PVC finolax accessories for rain water pipes including filling the joints with approved adhesive complete carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (i) 110 mm Diametre plain bend \n | 8 | Nos. | |
| 46 | 41.01 | PVC Plain shoe 110mm dia | 8 | Nos. | |
| 47 | 42 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc.c including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge i) 100 mm | 32 | Nos. | |
| 48 | 43 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold ofmild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge Profile B | 143.2 | Per running metre | |
| 49 | 44 | Providing and fixing steel glazed doors windowes and ventilators of standard rolled steel section joints mitred and welded with 16x3.15 mm hungs10 cm long embedded in cement conc rete block 15x10x10 cm size of 1:3 :6 (1Cement :3sand :6graded stone agg. 20mm nominal size )or with wooden/steel pluges and screws or plugs or with fixing cl or with bolts and ips or with bolts and nuts as required and iron fitting including providing and fixing of glass pans with glazing clips including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge . | 119.04 | Per square meter | |
| 50 | 45 | Steel work welded in built up sections/ framed work including hollow section , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required i) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge \n | 214.88 | Per quintal | |
| 51 | 46 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters 80x1.25 mm M.S laths with1.25 thick top cover including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 55.12 | Per square metre | |
| 52 | 47 | Providing and fixing ball bearing for rolling shutters including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 10 | Nos. | |
| 53 | 48 | Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome. including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 575.93 | Per square metre | |
| 54 | 49 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 575.93 | Per square metre | |
| 55 | 50 | Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 399.41 | Per square metre | |
| 56 | 51 | Painting with oil type wood preservative of approved brand and manufacture New work (two or more coats) including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge With white enamel paint | 399.41 | Per square metre | |
| 57 | 52 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 2453.3 | Per square metre | |
| 58 | 53 | 6mm Cement plaster to ceiling (a) In Cement mortar 1:3(1 Cement:3 Sand) including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 664 | Per square metre | |
| 59 | 54 | 15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. | 924.42 | Per square metre | |
| 60 | 55 | 15mm (fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement:: six sand) within all leads, lifts and as per the direction of Engineer-in-Charge. | 894.65 | per square meter | |
| 61 | 56 | 20mm Cement plaster in two coats,backing coat 10mm and finishing coat 10mm thick on rough side of brick/stone masonry walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:4 (one cement:four sand).complete including all leads and lifts as per direction of the Engineer-in-Charge | 48.94 | Per square metre | |
| 62 | 57 | Distempering (two or more coats) ceiling /slopping surface with oil bound washable acrylic distemper of approved brand and manufacture of and of required shade of undecorated wall surfaces to give an even and including a priming coat withshade overAlkali-resistance primer of approved brand and manufactureafter thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth.Priming coat with distemper primer including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. | 1911.18 | Per square metre | |
| 63 | 58 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge | 210.62 | per square meter | |
| 64 | 59 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.i) 15 mm nominal bore | 275 | Per running metre | |
| 65 | 59.01 | 20 mm nominal bore | 80 | Per running metre | |
| 66 | 60 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. including all leads and lifts as per direction of the Engineer-in-Charge.20 mm nominal bore | 200 | Per running metre | |
| 67 | 61 | Providing and fixing P.V.C. water storage tank of I.S.I ; 12701 marked SINTEX or equivilent G.i. Inlet and outlet connecution, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement inculding hoisting up to all heights above ground level. including curing complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.(i) 1000 lters capacity | 10 | Nos. | |
| 68 | 62 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge | 4 | Nos. | |
| 69 | 63 | Providing and fixing PVC cowl 75 mm dia including carriage of materials within all leads an lifts as per direction of Engieer in charge | 2 | Nos. | |
| 70 | 64 | Providing and fixing cast iron floor trap of self cleaning desion with sand cast iron screwed down or hinged grating with out vent arn complete including cost of cutting and making goods the walls and floors including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.:- | 48 | Nos. | |
| 71 | 65 | Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) Cat No. 2071 size 58X44 cm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately).in white colour Of (PRIMA) Cera or its equivalent including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.(a) Orrissa Patern cat. No. 2071 of cera or its equilevent | 18 | Nos. | |
| 72 | 66 | Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge. i) withwhite plastic seat and cover | 2 | Nos. | |
| 73 | 67 | Providing and fixing white vitreous china flat back or wall corner type corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredinciuding painting of cistern and fittings, cutting and making good the walls floors where required including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge. Flat back | 8 | Nos. | |
| 74 | 68 | Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge. \n | 4 | Nos. | |
| 75 | 69 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge | 2 | Nos. | |
| 76 | 70 | Providing and fixing PVC low level flushing cistern White high density polyethylene / poly ropylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and providing and fixing making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. | 18 | Nos. | |
| 77 | 71 | Providing and fixing vitreous china wash basin cat no 10001 in white colour with single hole for piller tap with C.I. or M.S. brackets painted white inculding cutting hole and making good the same butt exculding fitting flat back size 55x40 cm Of (PRIMA) Cera or its equivalent | 20 | Nos. | |
| 78 | 72 | Providing and fixing 600x120 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge . | 8 | Nos. | |
| 79 | 73 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\" BSP thread and shapes, weighing not less than 60 gms.including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. | 8 | Nos. | |
| 80 | 74 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge..for wash basin or sink :-32mm dia | 20 | Nos. | |
| 81 | 75 | Providing and fixing 100 mm dia sand cast iron graiting for gully trap including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge | 20 | Nos. | |
| 82 | 76 | Providing and fixing 600mm x 450 mm bevelled edge miror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.. | 8 | Nos. | |
| 83 | 77 | Providing and fixing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colourincluding carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.\n \n\n \n | 8 | Nos. | |
| 84 | 78 | Providing and fixing C.P Brass bib cock/tap of approved quality confirming to IS 8931 ( 15mm dia) with in all leads and lifts or as per the direction of Engineer-in Charge. | 66 | Nos. | |
| 85 | 79 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming 15mm without Nuts and pipe including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.. | 52 | Nos. | |
| 86 | 80 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. i) 15 mm nominal bore | 52 | Nos. | |
| 87 | 81 | Providing and fixing P.V.C connection with brass unions. including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. i) 300/450mm length | 48 | Nos. | |
| 88 | 82 | Providing and fixing brass full way valve with wheel including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.i) 15mm nominal bore | 10 | Nos. | |
| 89 | 82.01 | 20mm nominal bore | 10 | Nos. | |
| 90 | 83 | Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge | 6 | Nos. | |
| 91 | 84 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 .including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge | 6 | Nos. | |
| 92 | 85 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450 mm internal dimensions including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge | 4 | Nos. | |
| 93 | 86 | Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge | 11 | Nos. | |
| 94 | 87 | Providing and placing in horizontal layers filtering media duly graded washes and cleaned gravel 3 mm to 6 mm including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge. | 7.15 | per cubic meter | |
| 95 | 88 | Providing and fixing soil waste pipe100 mm.Nominal size.Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge | 123.1 | Per running metre | |
| 96 | 88.01 | 75 mm.Nominal size.Centrifugally cast (spun) iron socketed pipe as per IS: 3989 | 204 | Per running metre | |
| 97 | 89 | Providing and fixing M.S holder bats including steel bolts to sand cast iron / cast (spun) iron pipes embeded in and includng cement concrete blocks 100mm x 100 x 100mm of 1:2:4 mix (1 cement :2 sand :4 graded stone aggrgate 20mm nominal size) including cost of cutting holdes and making good the walls.including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge a)75millimeters nominal diameter / size pipe | 50 | Nos. | |
| 98 | 89.01 | 100 millimeters nominal diameter / size pipe | 25 | Nos. | |
| 99 | 90 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge. i) 75 millimeters nominal size | 24 | Nos. | |
| 100 | 90.01 | 100 millimeters nominal size | 24 | Nos. | |
| 101 | 91 | Providing and fixing plain bend of required degree including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge. i) 75millimeters nominal size | 38 | Nos. | |
| 102 | 91.01 | 100 millimeters nominal size | 72 | Nos. | |
| 103 | 92 | Single equal branch of required degree including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge. i): 75millimeters nominal size Sand cast iron S&S as per IS -1729 | 16 | Nos. | |
| 104 | 92.01 | 100 millimeters nominal size Sand cast iron S&S as per IS -1729 | 16 | Nos. | |
| 105 | 92.02 | Plain 75millimeters nominal size Sand cast iron S&S as per IS -1729 | 16 | Nos. | |
| 106 | 92.03 | 100 millimeters nominal size Sand cast iron S&S as per IS -1729 | 16 | Nos. | |
| 107 | 92.04 | Collar :75millimeters nominal size | 24 | Nos. | |
| 108 | 92.05 | 100 millimeters nominal size | 24 | Nos. | |
| 109 | 93 | Making connection of G.l distribution branch with G I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including all leads and lifts as per direction of the Engineer-in-Charge 25 to 40mm nominal bore | 6 | Nos. | |
| 110 | 94 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.. including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge. | 624.12 | per cubic meter | |
| 111 | 95 | WBM Grading -II : Providing, laying, spreading and compacting stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming , stone screening /binding materials to fill-up the interstices coarse aggregate, watering and compacting to the required density Grading -II as per Technical Specification Clause 405.by mechanically means using stone aggregate 63mm to 45mm (Sixty three to forty five milimeter) size including carriage of materials, with in all leads,lifts and as per the direction of Engineer- In- Charge. | 312.12 | Per cubic meter | |
| 112 | 96 | WBM Grading -III : Providing, laying, spreading and compacting stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming , stone screening /binding materials to fill-up the interstices coarse aggregate, watering and compacting to the required density Grading -III as per Technical Specification Clause 405. by mechanically means using stone aggregate 50mm to 25mm (Fifty to twenty five milimeter size)including carriage of materials, with in all leads , lifts and as per the direction of Engineer-In- Charge.\n | 312.12 | per cubic meter | |
| 113 | 97 | Providing and applyins primer coat with bituminous emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate 0.85 kg per per square meter using mechanical means as per technical specification clause 502 including carriage of material with in all leads, lifts and as per the direction of Engineer-In- Charge. | 4160.85 | per square meter | |
| 114 | 98 | Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kilogram per square metre on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per techanical specification Clause 503 ( Five hundred three) including carriage of material with in all leads, lifts and as per the direction of Engineer-In- Charge. | 8321.7 | per square meter | |
| 115 | 99 | Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge.50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacityincluding carriage of materials, with in all leads , lifts and as per the direction of Engineer-In- Charge.\n. | 208.04 | per cubic meter | |
| 116 | 100 | Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge.40/50 mm compacted thickness with bitumen of grade VG-10 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.including carriage of materials, with in all leads , lifts and as per the direction of Engineer-In- Charge.\n | 124.82 | per cubic meter |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
