Military Engineer Services-MES has published Repairs To Ac Sheets , Roof Treatment , False Ceiling , Joinery , Plumbing , Flooring And Certain Br Works At Various Buildings Of Rangia Military Station Under Ge Rangia. Submission Date for this Tender is 15-07-2021. Shed Construction Tenders in RANGIA Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Jun-2021 | BOQ AMDT | BOQ | 08-07-2021 |
| 2 | 08-Jul-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-07-2021 |
| Name of Work : REPAIRS TO AC SHEETS, ROOF TREATMENT, FALSE CEILING, JOINERY, PLUMBING, FLOORING AND CERTAIN BR WORKS AT VARIOUS BUILDINGS OF RANGIA MILITARY STATION UNDER GE RANGIA | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Unit | |
| 1 | 1 | Taking down chowkat or frame not exceeding 1.5 Sqm each (without taking off shutter from the frame), complete all as specified and as directed by Engineer-in-charge. | 30 | Each | |
| 2 | 2 | Taking down shutters of any description not exc. 1 sqm each, complete all as specified and as directed by Engineer-in-charge. | 10 | Per\nLeaf | |
| 3 | 3 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as per specified and as directed by Engineer-in-charge. | 70 | Per\nLeaf | |
| 4 | 4 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engineer-in-charge. | 150 | Sqm | |
| 5 | 5 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing, complete all as specified and as directed by Engineer-in-charge. | 100 | Sqm | |
| 6 | 6 | Demolition of unreinforced cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge. | 15 | Cum | |
| 7 | 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed by Engineer-in-charge. | 385 | Sqm | |
| 8 | 8 | Dismantling steel sheeting (corrugated or semi-corrugated) sheets in roof covering complete all as specified and as directed by Engineer-in-Charge. | 365 | Sqm | |
| 9 | 9 | Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation board/Slabs/blankets of any thickness including cover fillets, complete all as specified and as directed by Engineer-in-charge. | 100 | Sqm | |
| 10 | 10 | Dismantling water tanks of capacity exc. 250 and not exc. 500 ltrs, complete all as per specified and as directed by Engineer-in-charge. | 6 | Each | |
| 11 | 11 | Dismantling water tanks of capacity exc. 500 and not exc. 1000 ltrs, complete all as per specified and as directed by Engineer-in-charge. | 10 | Each | |
| 12 | 12 | Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge. | 6 | Qntl | |
| 13 | 13 | Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge. | 5.45 | Cum | |
| 14 | 14 | Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position, complete all as specified and as directed by Engineer-in-charge. | 3 | Cum | |
| 15 | 15 | Taking up or down 15 mm bore steel tubing and connections, complete all as per specified and as directed by Engineer-in-charge. | 50 | RM | |
| 16 | 16 | Taking up or down 20 mm bore steel tubing and connections, complete all as per specified and as directed by Engineer-in-charge. | 80 | RM | |
| 17 | 17 | M&L 2nd class hard wood in scantling wrought timber unframed and fixed, complete all as specified and as directed by Engineer-in-charge. | 3 | Cum | |
| 18 | 18 | S&F MS steel work in tubular trusses including special shaped washers etc., complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240, complete all as per specified and as directed by Engineer-in-charge. | 600 | Kg | |
| 19 | 19 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge. | 2 | Cum | |
| 20 | 20 | M&L for brick work with sub-class `B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge. | 30 | Sqm | |
| 21 | 21 | M&L for 50 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in footpath/ hard-standing / pavings / plinth protections, finished even and smooth without using extra cement, complete all as per specified and as directed by Engineer-in-charge. | 200 | Sqm | |
| 22 | 22 | S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as per specified and as directed by Engineer-in-charge. | 42 | Sqm | |
| 23 | 23 | S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators etc complete all as per specified and as directed by Engineer-in-charge. | 50 | Sqm | |
| 24 | 24 | S&F 100 mm long stainless steel butt hinges medium weight cold rolled, complete all as per specified and as directed by Engineer-in-charge. | 210 | Each | |
| 25 | 25 | S & F factory made solid panel PVC door shutter\n30 mm thick (style) consisting of frame\nmade out of M.S. tubes for top & bottom\nrails. M.S. frame shall be covered with heat\nmoulded plain colour PVC ‘C’ channel\nhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as per specified and as directed by Engineer-in-charge. | 40 | Sqm | |
| 26 | 26 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S Square tube complete all as per specified and as directed by Engineer-in-charge. | 142 | RM | |
| 27 | 27 | S&F Factory Made Solid PVC moulded Door Shutter (with wood free EPS) 28 to 30mm thick (style) with 2,4, or 6 raised panel design with 2mm thick moulded prelam sheet on the front face and 2mm prelam PVC sheet on back face complete as per manufacturer's instruction and all as per specified and as directed by Engineer-in-charge. | 9 | Sqm | |
| 28 | 28 | S&F factory made solid wire gauzed pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails. M.S.frame shall be covered with heat moulded prelam PVC "C" channel having a prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panells will be wire gaused in lieu of single side prelam PVC sheet panel. The wire gause shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tubes. The wire gause shall be stretched to tighten firmly. And jointed to gether with solvent cement, suppling & fixing in the frame at site complete all as per specified and as directed by Engineer-in-charge. | 9 | Sqm | |
| 29 | 29 | S&F anodised aluminium door using 96.6mm X 44.8 mm X 1.5 mm aluminium chowkhats, 84.0 x44.7mmX1.5mm section vertical styles and 101. 60X44.88X1.5mm rails mounted 04 Nos SS butt hinges 100 mm for each shutter with hydraulic door closer, mortice lock six lever vertical type mild steel 100 mm size, 02 Nos tower bolt 150 mm , sliding bolt 300 mm long 01 No, 200 mm 2 Nos door handles and fittings, bottom panel and top panel fixed with snap beading rubber of suitable size including taking down old unserviceable one, complete all as per specified and as directed by Engineer-in-charge. | 16 | Sqm | |
| 30 | 30 | S&F anodised Aluminium sliding window and ventilator frame made up 62 mm /29.5 mm 1.5 mm thick aluminium section & shutter made up 38 mm / 20 mm/1.5 mm thick without sash bar aluminium section including all necessary joining cleats, hold fast, rubber gasket, anodised snap beading, anodised aluminium fittings, suitable aluminium handle and locking arrangment etc. including taking down old unserviceable one, complete all as per specified and as directed by Engineer-in-charge. | 8 | Sqm | |
| 31 | 31 | S&F 75 mm long stainless steel butt hinges medium weight cold rolled, complete all as per specified and as directed by Engineer-in-charge. | 20 | Each | |
| 32 | 32 | S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as per specified and as directed by Engineer-in-charge. | 140 | Each | |
| 33 | 33 | S&F 100mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and as directed by Engineer-in-charge. | 20 | Each | |
| 34 | 34 | S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge. | 140 | Each | |
| 35 | 35 | S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge. | 20 | Each | |
| 36 | 36 | S&F galvanized mild wire cloth 0.63 nominal dia wire and average width aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed by Engineer-in-charge. | 42 | Sqm | |
| 37 | 37 | S&F in repair galvanized mild wire cloth 0.63 nominal dia wire and average width aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed by Engineer-in-charge. | 60 | Sqm | |
| 38 | 38 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed by Engineer-in-charge. | 31 | Sqm | |
| 39 | 39 | S&F 3 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads, complete all as specified and as directed by Engineer-in-charge. | 30 | Sqm | |
| 40 | 40 | S&F 3 mm thick figured glass in squares not exc. 0.5 sqm in each pane glazing with oil putty complete all as per specified and as directed by Engineer-in-charge. | 1 | Sqm | |
| 41 | 41 | S&F GI water tubes medium grade with all necessary fitting all as reqd complete of 15mm dia and fixed in walls/floor etc. complete all as per specified and as directed by Engineer-in-charge. | 50 | RM | |
| 42 | 42 | S&F GI water tubes medium grade with all necessary fitting all as reqd complete of 20mm dia and fixed in walls/floor etc. complete all as per specified and as directed by Engineer-in-charge. | 80 | RM | |
| 43 | 43 | S&F rotational moulded polyethylene water storage tanks double layered ISI Marked (cylindrical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position, complete all as per specified and as directed by Engineer-in-charge. | 6 | Each | |
| 44 | 44 | S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position, complete all as per specified and as directed by Engineer-in-charge. | 10 | Each | |
| 45 | 45 | S&F in repairs 20mm ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 20mm- 210 gms and fixed in position complete all as per specified and as directed by Engineer-in-charge. | 80 | Each | |
| 46 | 46 | M&L for 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes, complete all as specified and as directed by Engineer-in-charge. | 210 | Sqm | |
| 47 | 47 | M&L 10mm thick backing coat in CM 1:4 on brick or concrete surfaces for fixing of wall tiles as in dado/skirting, complete all as specified and as directed by Engineer-in-charge. | 160 | Sqm | |
| 48 | 48 | S&F non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 600mmx600 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and as directed by Engineer-in-charge. | 100 | Sqm | |
| 49 | 49 | S&F non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 600mmx600 mm, in vertical surface etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and as directed by Engineer-in-charge. | 20 | Sqm | |
| 50 | 50 | S&F Non-skid colour ceramic tiles (300x300) x 7 to 8mm thick in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed by Engineer-in-charge. | 50 | Sqm | |
| 51 | 51 | S&F for coloured glazed ceramic tiles (300x200) x 6 or7mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed by Engineer-in-charge. | 60 | Sqm | |
| 52 | 52 | S&F for colour Glazed ceramic coloured tiles (275x450) of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as per specified and as directed by Engineer-in-charge. | 80 | Sqm | |
| 53 | 53 | S&F glossy finish chequered cement concrete coloured tiles 25cm x 25cm x 22 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment complete all as per specified and as directed by Engineer-in-charge. | 60 | Sqm | |
| 54 | 54 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 of 60 mm thickness of M-35 grade with grey cement and pigment including dismantling & removing old unserviceable paver blocks, complete all as per specified and as directed by Engineer-in-charge. | 70 | Sqm | |
| 55 | 55 | M&L for sand filling under floor or in foundation incl watering and consolidation, complete all as per specified and as directed by Engineer-in-charge. | 2.8 | Cum | |
| 56 | 56 | S & F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste coupling of size 32 mm and waste pipe 32 mm, etc., complete all as per specified and as directed by Engineer-in-charge. | 6 | Each | |
| 57 | 57 | S&F in repairs padestal type bowl and cistern for couple closet (one piece) complete all as per specified and as directed by Engineer-in-charge. | 2 | Each | |
| 58 | 58 | S&F in repair vitreous china EWC wash down water closet pan (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as per specified and as directed by Engineer-in-charge. | 5 | Each | |
| 59 | 59 | S&F in repair Vitreous China squatting pan "Orissa" patern size 580x440mm white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, etc including 'P' or 'S' trap complete all as per specified and as directed by Engineer-in-charge. | 4 | Each | |
| 60 | 60 | S&F in repair PVC Low level flushing cistren 10 Ltr capacety including all fitting such as flush pipe brackets complete all as per specified and as directed by Engineer-in-charge. | 30 | Each | |
| 61 | 61 | S&F in repairs 32 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/sqcm fixed to walls, ceilings or in floors etc. complete all as per specified and as directed by Engineer-in-charge. | 50 | RM | |
| 62 | 62 | S & F in repair Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as per specified and as directed by Engineer-in-charge. | 6 | Each | |
| 63 | 63 | S&F in repair wall mixer , 3 in -1 system with provision for shower, chromium plated, fancy type, 15 mm bore, complete all as per specified and as directed by Engineer-in-charge. | 6 | Each | |
| 64 | 64 | S & F in repair chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as per specified and as directed by Engineer-in-charge. | 10 | Each | |
| 65 | 65 | S&F in repair 15mm angle stop valves cast copper alloy, with for iron pipe or for unions complete all as per specified and as directed by Engineer-in-charge. | 5 | Each | |
| 66 | 66 | S&F in repair 15mm angle stop valves cast copper alloy, fancy type with chromium plated for iron pipe or for unions complete all as per specified and as directed by Engineer-in-charge. | 30 | Each | |
| 67 | 67 | S&F in repair Gate valve 20 mm with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-charge. | 5 | Each | |
| 68 | 68 | Dismentling and breaking up 100mm/75 mm bore drain pipes AC /CI/PVC set in cement mortar complete all as per specified and as directed by Engineer-in-charge. | 150 | RM | |
| 69 | 69 | S&F 110 mm dia PVC (SWR) pipes single socketed, in any length, with rubber ring joints fixed to walls, complete all as per specified and as directed by Engineer-in-charge. | 150 | RM | |
| 70 | 70 | S&F PVC (SWR) 110 mm bore bends complete all as per specified and as directed by Engineer-in-charge. | 10 | Each | |
| 71 | 71 | S&F in repair PVC (SWR) 110 mm bore bends with access door complete all as per specified and as directed by Engineer-in-charge. | 15 | Each | |
| 72 | 72 | S&F in repair 110 mm dia bore PVC (SWR) junction (single T) equal or un-equal, complete all as per specified and as directed by Engineer-in-charge. | 5 | Each | |
| 73 | 73 | S&F in repair 15mm dia PVC connection pipe with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-charge. | 20 | Each | |
| 74 | 74 | S&F in repair 15mm dia bore pillar tap cast copper alloy with capston heads chroumium plated fency type, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as per specified and as directed by Engineer-in-charge. | 40 | Each | |
| 75 | 75 | M&L rendering 10mm thick on other than fair faces of brick work or concrete in cement mortar 1:6, surface to be finished fair & even without using extra cement, complete all as specified and as directed by Engineer-in-charge. | 50 | Sqm | |
| 76 | 76 | M&L for rendering 15mm thick on fair faces of brick work orconcrete in cement mortar 1:4 , surface finished even and smooth without using extra cement using water proofing compound @2% in top layers as per manufacturer's direction complete all as per specified and as directed by Engineer-in-charge.\nNote - WPC shall be measured and paid saparately. | 100 | Sqm | |
| 77 | 77 | M&L for G I Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste, complete all as specified and as directed by Engineer-in-charge. | 100 | Sqm | |
| 78 | 78 | M&L rendering 10mm thick on other than fair faces of brick work or on other side of lathing in cement mortar 1:6, surface to be finished fair & even without using extra cement, complete all as specified and as directed by Engineer-in-charge. | 100 | Sqm | |
| 79 | 79 | M&L for rendering 15mm thick on fair faces of brick work or one side of lathing in cement mortar 1:4 , surface finished even and smooth without using extra cement using water proofing compound in top layers as per manufacturer's direction complete all as per specified and as directed by Engineer-in-charge.\nNote - WPC shall be measured and paid saparately. | 100 | sqm | |
| 80 | 80 | Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge. | 40 | Kg | |
| 81 | 81 | M&L for preparation of new or previously untreated wood or wood based surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge. | 184 | Sqm | |
| 82 | 82 | M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of cresote oil, complete all as specified and as directed by Engineer-in-charge. | 30 | Sqm | |
| 83 | 83 | M&L for preparing new plastered surfaces and applying two coats of cement base paint on walls, complete all as per specified and as directed by Engineer-in-charge. | 200 | Sqm | |
| 84 | 84 | M&L for preparing new plastered surface and applying two coats of distemper oil emulsion on wall surfaces over a coat of alkali resistant primer and wall putty complete all as specified and as directed by Engineer-in-charge. | 130 | Sqm | |
| 85 | 85 | M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge. | 20 | Sqm | |
| 86 | 86 | M&L Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as per specified and as directed by Engineer-in-charge. | 15 | Sqm | |
| 87 | 87 | M&L for preparation of new or previously untreated steel or iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide, primer over 10cm width or girth complete all as specified and as directed by Engineer-in-charge. | 100 | Sqm | |
| 88 | 88 | S&F in repair 15 mm bore Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge. | 100 | Each | |
| 89 | 89 | S&F in repair bib taps, standard of PTMT 15mm bore of any colour, high pressure, screwed for iron pipe complete all as specified and as directed by Engineer-in-charge. | 20 | Each | |
| 90 | 90 | S & F in repair Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as per specified and as directed by Engineer-in-charge. | 20 | Each | |
| 91 | 91 | S&F in repairs towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as per specified and as directed by Engineer-in-charge. | 10 | Each | |
| 92 | 92 | S & F in repair health faucet with 1.00 mtr tube and hook complete all as specified and directed, complete all as per specified and as directed by Engineer-in-charge. | 20 | Each | |
| 93 | 93 | S & F in repair jet spray nozzle with PVC tubing, fixing nut & jet flange complete all as per specified and as directed by Engineer-in-charge. | 5 | Each | |
| 94 | 94 | S&F in repair bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as per specified and as directed by Engineer-in-charge. | 5 | Sqm | |
| 95 | 95 | S&F in repair 300mm dia ordinary rat tail rod pattern springs of mild steel including roller and roller plate for skeletton door shutters complete all as per specified and as directed by Engineer-in-charge. | 20 | Each | |
| 96 | 96 | S&F in repairs, floor door stopper 14cm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as per specified and as directed by Engineer-in-charge. | 20 | Each | |
| 97 | 97 | S&F aluminium alloy 300 mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy, complete all as specified and as directed by Engineer-in-charge. | 35 | Each | |
| 98 | 98 | Disconnecting existing tanks exc 250 Ltrs and n.exc 500 Ltrs, setting aside for repairs, cleaning etc and hoisting if required, reconnecting and refixing in positiion after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, etc complete all as specified and directed by Engineer in Charge. | 50 | Each | |
| 99 | 99 | M&L in repairs aluminium door closer hydraulically regulated, designation No. 2, universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as per specified and as directed by Engineer-in-charge. | 8 | Each | |
| 100 | 100 | M&L for petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer checks nuts plunger etc any type of flush complete all as per specified and as directed by Engineer-in-charge. | 30 | Each | |
| 101 | 101 | S & F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge. | 2 | Each | |
| 102 | 102 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge. | 8 | Each | |
| 103 | 103 | S&F in repair fancy type curtain/hanger rods of mild steel pre painted with fixing decorative bracket stops rollers etc complete all as per specified and as directed by Engineer-in-charge. | 95 | RM | |
| 104 | 104 | S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as per specified and as directed by Engineer-in-charge. | 10 | Each | |
| 105 | 105 | S&F in repair corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 60 cm long, complete all as per specified and as directed by Engineer-in-charge. | 10 | Each | |
| 106 | 106 | S&F in repairs corner glass shelves with border to hold the bathing kit minimum width 150 mm and fixed in position complete all as per specified and as directed by Engineer-in-charge. | 10 | Each | |
| 107 | 107 | S&F in repair tank cover for PVC tank (500 / 750 / 1000Ltrs) cover with 6 mm dia MS bar hinging device and 6mm dia MS bar locking arrangement of 'S'- type for monkey protection etc complete all as per specified and as directed by Engineer-in-charge. | 30 | Each | |
| 108 | 108 | S&F in repair CP toilet paper roll holder with flap including all necessary fittings, complete all as per specified and as directed by Engineer-in-charge. | 5 | Each | |
| 109 | 109 | S&F in repair kitchen plate rack made up of stainless steel 1 mm and of size 900 x600 x250 mm complete all as per specified and as directed by Engineer-in-charge. | 10 | Each | |
| 110 | 110 | S&F in repair laminated PVC kitchen cabinets of depth 300mm with decorative finish on one face and other face white,made out of 18mm thick outer box and 18mm thick shelves and shutters complete including knobs, hinges. fixed to walls in repairs with steel screw and PVC sleeves by drilling holes complete all as per specified and as directed by Engineer-in-charge.\n(Note : Only front face is to be measured) | 10 | Sqm | |
| 111 | 111 | S&F in repair laminated PVC kitchen cabinets of depth 610mm with decorative finish on one face and other face white,made out of 18mm thick outer box and 18mm thick shelves and shutters complete including knobs, hinges fixed to walls in repairs with steel screw and PVC sleeves by drilling holes complete all as per specified and as directed by Engineer-in-charge.\n(Note : Only front face is to be measured) | 10 | Sqm | |
| 112 | 112 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.35mm and cross tee of size 24x30x0.70mm with 4mm dia GI wire as suspender and including 4mm thick E-Board classic (decorative type) including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting, complete all as specified and as directed by Engineer-in-charge. | 100 | Sqm | |
| 113 | 113 | M&L 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with fixed with L-type or J-type or cranked hook bolts, complete all as specified and as directed by Engineer-in-charge. | 120 | Sqm | |
| 114 | 114 | Fixing only Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts (except sheets), complete all as specified and as directed by Engineer-in-charge. | 10 | Sqm | |
| 115 | 115 | M&L for 6 mm thick Asbestos cement serrated ridge for corrugated and semi corrugated sheets fixed with L-type or J-type or cranked hook bolts, complete all as specified and as directed by Engineer-in-charge. | 30 | RM | |
| 116 | 116 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge. | 200 | Sqm | |
| 117 | 117 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge. | 35 | Sqm | |
| 118 | 118 | Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section, complete all as specified and as directed by Engineer-in-charge. | 60 | RM | |
| 119 | 119 | M&L second class hard wood plain fillets, square or rectangular or triangular in section, clean sawn, secured with nails or brads having sectional area exceeding 6 sqcm but not exceeding 13 sqcm complete all as specified and as directed by Engineer-in-charge. | 60 | RM | |
| 120 | 120 | M&L in repair 4 mm thick asbestos cement plain building boards, fixed to timber frame work with screws as in ceiling complete all as specified and as directed by Engineer-in-charge. | 50 | Sqm | |
| 121 | 121 | M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as per specified and as directed by Engineer-in-charge. | 6 | 10 RM | |
| 122 | 122 | M&L for ATT at points of contract of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as per specified and as directed by Engineer-in-charge.\nNote:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. | 80 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
