Military Engineer Services-MES has published Repairs To Floors , Wall Joineries , Roof Sheet , Ceiling , Plumbing Items , Rolling Shutters And Steel Gates And Certain Misc B/R Works At Sect C And Otm Accn Of Zone Iii And Iv Area Under Age B/R-Ii Under Ge Dinjan. Submission Date for this Tender is 21-07-2021. Building Work Tenders in DINJAN MIL STN Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Jun-2021 | DATE CORRIGENDUM | Date | 14-07-2021 |
| 2 | 14-Jul-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-07-2021 |
| Name of Work: REPAIRS TO FLOORS, WALL JOINERIES, ROOF SHEET, CEILING, PLUMBING ITEMS, ROLLING SHUTTERS AND STEEL GATES AND CERTAIN MISC B/R WORKS AT SECT 'C' AND OTM ACCN OF ZONE III AND IV AREA UNDER AGE B/R-II UNDER GE DINJAN | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges complete all as specified and as directed. | 77 | Sqm | |
| 2 | 2 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. | 45 | Sqm | |
| 3 | 3 | S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and as directed.\nNote : Colour of ridge shall be same colour as that of sheet used for roof. | 12 | Sqm | |
| 4 | 4 | S&F for 0.63 mm thick, galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts and washers, in roofs, with grade of zinc coating 120gm per sqm, conforming to IS -277-2003 complete all as specified and as directed. | 30 | Sqm | |
| 5 | 5 | Fixing only galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with and including L-type or J-type or cranked hook bolts and washers, in roofs using old serviceable roof sheets complete all as specified and as directed.\nNote : Old roof sheets retrived under item No 1 shall be reused. | 15 | Sqm | |
| 6 | 6 | S&F 0.63 mm thick, galvanised, plain mild steel sheet as in ridge, hips, valley gutters and flushings, fixed with L-type or J-type or cranked hook bolts and washers, with grade of zinc coating 120gm per sqm, conforming to IS -277-2003. | 15 | Sqm | |
| 7 | 7 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. | 0.85 | Qtl | |
| 8 | 8 | Dismantling timber scantlings 40 Sq.cm and over in section, in any position complete all as specified and as directed. | 0.5 | Cum | |
| 9 | 9 | S&F for rolled mild steel framed work as in trusses, purlins ,posts etc using joist, channel, angle, or tee sections, including distance pieces, cleats etc cutting, welding, drilling holes etc. Steel section conforming to Fe-290 (Gde-E-165) quality-B complete all as specified and as directed. | 160 | Kg | |
| 10 | 10 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets and frame work any type complete all as specified and as directed. | 130 | Sqm | |
| 11 | 11 | S&F for aluminium anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-board (plain), HSPC fixed to frame including providing two coats of white wash complete all as specified and as directed.\nMake of E-Board : Eternit Everest / lafarge/ Armstrong/Visaka Industries Ltd. | 130 | Sqm | |
| 12 | 12 | Taking down chowkats or frame not exceeding 1.5 Sqm in each with shutters (without taking off shutter from the frame) complete all as specified and as directed. | 90 | Each | |
| 13 | 13 | Taking down chowkats or frames exceeding 1.5 but not exceeding 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and as directed.\n | 55 | Each | |
| 14 | 14 | Taking down shutters of any description and refixing in same location/opening not exceeding 1 sqm each including resecuring or easing & adjusting also refixing existing serviceable builders hardware complete all as specified and as directed. | 5 | Leaf | |
| 15 | 15 | Taking down shutters of any description and refixing in same location/opening exc 1 sqm but n exc 2sqm each including resecuring or easing & adjusting also refixing existing serviceable builders hardware complete all as specified and as directed. | 16 | Leaf | |
| 16 | 16 | S&F pressed steel frames for doors local work shop made of size 125x60mm with one or more rebates using cold rolled commercial mild steel sheet of 1.2mm thick including providing and fixing necessary lugs, 100mm butt hinges, lock strike plate, shock absorber etc and including PCC filling of hollow section using plain cement concrete (1:3:6) type C1 complete all as specified and as directed. | 52 | RM | |
| 17 | 17 | S&F for pressed steel frames for doors local work shop made of size 105x60mm with one or more rebates using cold rolled commercial mild steel sheet of 1.2mm thick including providing and fixing necessary lugs, 100mm butt hinges, lock strike plate, shock absorber etc and including PCC filling of hollow section using plain cement concrete (1:3:6) type C1 complete all as specified and as directed. | 90 | RM | |
| 18 | 18 | S&F for well seasoned second class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. | 0.5 | Cum | |
| 19 | 19 | M&L for 35mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of 12mm thick veneered particle board medium density with commercial face veneers supplied and fitted to chowkats. Sizes/section of members of shutters shall be as specified in SSR Part I, Section -8, clause 8.24 (a) complete all as specified and as directed.. | 80 | Sqm | |
| 20 | 20 | M&L for 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded as in SSR Part I Section 8 clause 8.24 (a) complete all as specified and as directed.. | 25 | Sqm | |
| 21 | 21 | S&F for 35 mm thick flush door shutter, solid core construction, with particle board core and plywood face panels, commercial type on both sides with internal jointless lipping not less than 25 mm depth complete all as specified and as directed. | 10 | Sqm | |
| 22 | 22 | S&F for 30 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded as in SSR Part I Section 8 clause 8.24 (b) complete all as specified and as directed. | 35 | Sqm | |
| 23 | 23 | S&F for solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.\n | 180 | RM | |
| 24 | 24 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed. | 30 | Sqm | |
| 25 | 25 | S&F for factory made solid PVC moulded door shutters with wood free EPS board 28 to 30 mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face & 2mm thick plain colour PVC sheet on back face. The door on all the edges to be sealed with lipping of 10mm (5mmX2) thick X25mm wide PVC sheet for 3 sides and 60mm wide PVC sheet for lock side.The lipping shall be bonded to the 2mm moulded / plain PVC sheet with solvent cement complete all as specified and as directed.\n | 22 | Sqm | |
| 26 | 26 | M&L for plain cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and as directed. | 3.25 | Cum | |
| 27 | 27 | S&F for mild steel small articles using flat iron of size 25x3mm thick such as band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290 (Gde E-165) complete all as specified and as directed. | 22 | Kg | |
| 28 | 28 | S&F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including painting with one shop coat of zinc chrome primer complete all as specified and as directed. | 20 | Sqm | |
| 29 | 29 | S&F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including painting with one shop coat of zinc chrome primer complete all as specified and as directed. | 20 | Sqm | |
| 30 | 30 | M&L for anodised aluminium section, medium anodic coating of grade AC 15 for frame of doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed. | 160 | Kg | |
| 31 | 31 | M&L for anodised aluminium window and ventilator shutters, fixed type, with or without sash bar, using aluminium section weighing not less than 0.55Kg per metre including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium handles 2 numbers in each shutter, hinges, anodised aluminium snap beading, screws etc complete all as specified and as directed. | 30 | Sqm | |
| 32 | 32 | S&F for anodised aluminium door shutters, aluminium section weighin 0.55 kg/m including necessary joining cleat glazing clips, rubber neoprene packing handle 2 Nos in each door, hinges, anodised aluminium snap beading screw etc. including powder coating of minimum 50 micron thickness complete all as specified and as directed. | 31 | Sqm | |
| 33 | 33 | S&F for aluminium anodised (Deco) pattern grill 75X75mm mesh size for window, 7mm to 8mm thick, design No 102, including suitable F/H section frame, aluminium cleat, fixed with steel screw to window frame complete all as specified and as directed. | 20 | Sqm | |
| 34 | 34 | S&F for aluminium (extruded section body) door closer hydraulically regulated, designation No.3, universal type suitable for shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. | 23 | Each | |
| 35 | 35 | S&F for 150mm dia (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. | 5 | Each | |
| 36 | 36 | S&F for 12mm thick prelaminated particle board, interior grade, one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame works complete all as specified and as directed. | 45 | Sqm | |
| 37 | 37 | S&F for 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. | 170 | Each | |
| 38 | 38 | S&F for 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. | 90 | Each | |
| 39 | 39 | S&F for 150 mm size aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed.\n | 90 | Each | |
| 40 | 40 | S&F fpr 100 mm size aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed.\n | 100 | Each | |
| 41 | 41 | S&F for 150mm long mild steel, barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed. | 84 | Each | |
| 42 | 42 | S&F for 100mm long mild steel, anodised, barrel tower bolts stove enamelled black, with bright bolt complete all as specified and as directed. | 60 | Each | |
| 43 | 43 | S&F for mild steel sliding door bolts, 250mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and as directed. | 24 | Each | |
| 44 | 44 | S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including timber bead complete all as specified and as directed.\n | 70 | Sqm | |
| 45 | 45 | S&F for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including timber bead complete all as specified and as directed.\n | 67 | Sqm | |
| 46 | 46 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel frames, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. | 103 | Sqm | |
| 47 | 47 | S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. | 55 | Sqm | |
| 48 | 48 | S&F for 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. | 22 | Sqm | |
| 49 | 49 | S&F in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. | 4 | Each | |
| 50 | 50 | S&F in repairs curtain rails, harrison rail, aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed. | 60 | RM | |
| 51 | 51 | M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. | 60 | Sqm | |
| 52 | 52 | M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed. | 84 | Sqm | |
| 53 | 53 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing the rubbish off the premises complete all as specified and as directed. | 350 | Sqm | |
| 54 | 54 | M&L for non-skid, ceramic, coloured tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. including 15 mm thick screed bed in cement mortor (1:6) and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.\n | 200 | Sqm | |
| 55 | 55 | M&L for glazed, ceramic, coloured tiles of size 300mmx200mmx7-8mm thick, on vertical surfaces, including 10 mm thick backing of cement mortor (1:4) and set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed. | 120 | Sqm | |
| 56 | 56 | M&L for machine cut kota stone slab flooring 20 to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick, screed bed in cement mortar (1:6) complete all as specified and as directed. | 27 | Sqm | |
| 57 | 57 | M&L for machine cut kota stone, 20 to 25mm thick as in riser of steps, skirting, dado and pillar laidover cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick, screed bed in cement mortar (1:6) complete all as specified and as directed. | 10 | Sqm | |
| 58 | 58 | M&L for granite stone slab (of any type) 18 to 20 mm thick, machine cut, as in cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortar (1:6) & cutting, rounding to edge of slab, polishing complete all as specified and as directed. | 4 | Sqm | |
| 59 | 59 | M&L for chequered cement concrete tiles of size 25cm x 25cm x 20mm thick, as in floors etc, including 15 mm thick screed bed in cement mortar (1:6) and set & jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and as directed.\n | 80 | Sqm | |
| 60 | 60 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. | 9 | Cum | |
| 61 | 61 | M&L for brick work using locally available first class bricks sub class 'B' bricks (old size brick), straight or curved on plan exceeding 6 m mean radius, built in cement mortar (1:6) complete all as specified and as directed. | 7.5 | Cum | |
| 62 | 62 | M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar (1:4) as in half brick thick walls complete all as specified and as directed. | 10 | Sqm | |
| 63 | 63 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed | 100 | Sqm | |
| 64 | 64 | M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. | 50 | Sqm | |
| 65 | 65 | M&L for rendering 10 mm thick in cement mortar (1:4) on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and as directed. | 31 | Sqm | |
| 66 | 66 | M&L for rendering 5 mm thick in cement mortor (1:3) on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and as directed. | 20 | Sqm | |
| 67 | 67 | M&L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of chalk whiting primerfor distemper complete all as specified and as directed. | 41 | Sqm | |
| 68 | 68 | M&L for preparation new external surfaces of wall, chajja, facia etc and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of primer as per manufacturer's instruction complete all as specified and as directed. | 50 | Sqm | |
| 69 | 69 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. | 20 | Sqm | |
| 70 | 70 | Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. | 8 | Cum | |
| 71 | 71 | M&L for plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and as directed. | 3 | Cum | |
| 72 | 72 | M&L for 75 mm thick, plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, footpath, etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand (1:2) making impressions of expanded metal whilst the concrete is green complete all as specified and as directed. | 15 | Sqm | |
| 73 | 73 | S&F for 3 mm thick, 38mm wide glass dividing strips and inserted in position to conform to design complete all as specified and as directed. | 10 | RM | |
| 74 | 74 | M&L for 75 mm thick, plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and as directed. | 50 | Sqm | |
| 75 | 75 | M&L for machine pressed precast conctete interlocking paver block, glossy finish of approved colour, design & shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment including 30 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. complete all as specified and as directed. | 50 | Sqm | |
| 76 | 76 | Cleaning and removing all scale and dirt, etc. from tanks of capapcity exceeding 250 Ltr & not exceeding 500 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed. | 15 | Each | |
| 77 | 77 | Cleaning and removing all scale and dirt, etc. from tanks of capapcity exceeding 500 Ltr & not exceeding 1000 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed. | 30 | Each | |
| 78 | 78 | Disconnecting existing water tank of capacity exceeding 250 litres & not exceeding 500 litres, reconnecting and refixing in position including cleaning and removing all scale and dirt, etc from tank and from mouth of circulating pipes, etc complete all as specified and as directed. | 15 | Each | |
| 79 | 79 | Disconnecting existing water tank of capacity exceeding 500 litres & not exceeding 1000 litres, reconnecting and refixing in position including cleaning and removing all scale and dirt, etc from tank and from mouth of circulating pipes, etc complete all as specified and as directed. | 10 | Each | |
| 80 | 80 | Dismantling of rotational moulded polyethylene water tank of capacity exceeding 250 litres but not exceeding 500 Ltrs complete all as specified and as directed. | 24 | Each | |
| 81 | 81 | S&F for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe complete all as specified and as directed. | 24 | Each | |
| 82 | 82 | Dismantling of rotational moulded polyethylene water tank of capacity exceeding 500 litres but not exceeding 1000 Litres complete all as specified and as directed. | 16 | Each | |
| 83 | 83 | S&F for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe complete all as specified and as directed. | 16 | Each | |
| 84 | 84 | S&F for 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and as directed. | 30 | Each | |
| 85 | 85 | S&F in repairs 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and as directed. | 70 | Each | |
| 86 | 86 | Taking up or down 15 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for reuse at same site or other site complete all as specified and as directed. | 140 | RM | |
| 87 | 87 | Supply, laying, connection and testing, 15mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239 (Part -2):2011 and fixtures fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed. | 100 | RM | |
| 88 | 88 | Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc retrieved from relevent item here in before respectively complete all as specified and as directed. | 40 | RM | |
| 89 | 89 | Taking up or down 20 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for reuse at same site or other site complete all as specified and as directed. | 80 | RM | |
| 90 | 90 | Supply, laying, connection and testing, 20mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239 (Part -2):2011 and fixtures fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed. | 60 | RM | |
| 91 | 91 | Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc retrieved from relevent item here in before respectively complete all as specified and as directed. | 20 | RM | |
| 92 | 92 | S&F in repairs 15 mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. | 22 | Each | |
| 93 | 93 | S&F in repairs 15 mm bore, stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. | 10 | Each | |
| 94 | 94 | S&F in repairs 15 mm bore, bib taps, PTMT, any colour, high pressure screwed for iron pipes and fixed (min weight 90 gms) complete all as specified and as directed. | 285 | Each | |
| 95 | 95 | S&F in repairs 15 mm bore, stop valve , PTMT, any colour, high pressure screwed for iron pipes and fixed (min weight 120 gms) complete all as specified and as directed. | 15 | Each | |
| 96 | 96 | S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor using concrete 1:2:4 type B0 and to match with existing specifications complete all as specified and as directed. \nMake : Cat No. C0117 of Parryware/Hindware/Cera. | 17 | Each | |
| 97 | 97 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with PVC seat and cover complete but excluding flushing cistern & flush pipe including making good to disturbed surfaces of floor using concrete 1:2:4 type B0 and to match with existing specifications complete all as specified and as directed. \nMake : Cat No. C0287/0288 of Parryware/Hindware/Cera. | 17 | Each | |
| 98 | 98 | S&F in reapirs 10 litre capacity, PVC valve less syphonic duel type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and as directed. | 35 | Each | |
| 99 | 99 | S&F in repairs casecade health faucet including hook and hose not less than 1.2 metre long all as specified and as directed. \nMake : Cat No. T9937A1 of Parryware/Hindware/Cera. | 10 | Each | |
| 100 | 100 | S&F in repairs vitreous china wash basin, size 550x400mm, white, flat back, with PVC waste pipe, CP waste coupling, chain, plug and porcelean stopper & backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and as directed.\nMake : Cat No. C0406 of Parryware/Hindware/Cera. | 18 | Each | |
| 101 | 101 | S&F for 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. | 10 | Each | |
| 102 | 102 | S&F in repairs 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. | 15 | Each | |
| 103 | 103 | S&F in repairs 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and as directed. | 38 | Each | |
| 104 | 104 | S&F in repairs 600mmX450mm bevelled edge mirror of selected quality 5mm thick glass, mounted on PVC frame including key hole plates for hanging and fixed to wall with chromium plated cup washers and screws complete all as specified and as directed. | 20 | Each | |
| 105 | 105 | S&F in repairs sink made out of stainless steel 1.00mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, oberall size 430X510X203mm and bowl size 430X380X203mm complete all as specified and as directed.\nMake : Prayag/Anjali/Blue Star. | 5 | Each | |
| 106 | 106 | S&F in repairs swival shower of PTMT 15mm bore (minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum wt 40 gms) complete all as specified and as directed. | 15 | Each | |
| 107 | 107 | Dismantling of 100mm bore, PVC/cast iron or reinforced concrete /SWG drain pipes, etc with fittings jointed in cement mortar and taking out of trenches, floor or walls if required complete all as specified and as directed. | 90 | RM | |
| 108 | 108 | S&F for 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches, floor complete all as specified and as directed. | 15 | RM | |
| 109 | 109 | S&F for 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches, floor complete all as specified and as directed. | 15 | RM | |
| 110 | 110 | S&F for 110mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. | 40 | RM | |
| 111 | 111 | S&F for 75mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. | 20 | RM | |
| 112 | 112 | S&F for 110 mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and as directed. | 8 | Each | |
| 113 | 113 | S&F in repairs 75 mm bore, PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. | 28 | Each | |
| 114 | 114 | S&F for 110 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed. | 14 | Each | |
| 115 | 115 | S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed. | 15 | Each | |
| 116 | 116 | S&F in repairs PTMT (half or full threaded) waste coupling 40mm for sink (min weight 32mm - 45gms/40mm - 60gms) complete all as specified and as directed. | 20 | Each | |
| 117 | 117 | M&L for servicing of steel rolling shutters of size/area upto 21 sqm (single opening), lever operated with rectification of minor defects, overhauling, greasing, lubricating of guide rails and refixing clamps, rivetting including necessary repairs to the locking arrangements and replacement of wornout spare parts such as gear/worm/interlocking laths/ ball bearing in order to bring the rolling shutter easy operation and smooth functioning all as directed. \nNote : (i) The spare parts will be measured and paid separately as supply only under respective item of this schedule. \n(ii) Minor/small repair or minor welding if required to be done, the same shall be done at spot without removing the shutter and cost element of this work shall deemed to be included in the quoted rate under this item. | 30 | Each | |
| 118 | 118 | Supply only gear/worm (machine cut) including connection mechanical device and testing complete all as specified and as directed. | 18 | Each | |
| 119 | 119 | Supply only interlocking lath sections made out of cold rolled steel strips of 1.2mm thick and 75mm wide complete all as specified and as directed. | 175 | RM | |
| 120 | 120 | Supply only rolling ball bearing of suitable size for existing rolling shutters complete all as specified and as directed. | 10 | Each | |
| 121 | 121 | S&F for main spring 'O' gauge 450mm long of approved make for existing rolling shutters complete all as specified and as directed. | 10 | Each | |
| 122 | 122 | S&F for saftey lever lock mild steel 4 levers suitable for existing rolling shutters complete all as specified and as directed. | 15 | Each | |
| 123 | 123 | S&F in repairs 1 mm thick mild steel sheet hood cover of hexagonal, square or circular contour depending upon the contour of bracket plates, properly stiffened with MS angle/ flat stiffener at top and bottom edges complete all as directed. | 40 | Sqm | |
| 124 | 124 | S&F in repairs 50mm bore MS pipe for suspension shafts for rolling shutters complete all as specified and as directed. | 15 | RM | |
| 125 | 125 | S&F in repairs bevel gear box for rolling shutters complete all as specified and as directed. | 5 | Each | |
| 126 | 126 | S&F in repairs crank handle for operating gear operated rolling shutters complete all as specified and as directed. | 5 | Each | |
| 127 | 127 | M&L in repairs welding exceeding 2.5cm but not exceeding 5cm in length to the thickness of metal not exceeding 6mm thick complete all as specified and as directed. | 250 | Each | |
| 128 | 128 | Greasing only rolling shutters of size/area upto 21sqm (single opening) including guide channels complete all as specified and as directed. | 45 | Sqm | |
| 129 | 129 | M&L for framed mild steel work for door or gate of angle iron or other section with gusset plate, rail, braces, etc complete drilling for fixing of steel sheeting or other coverings. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing. Mild steel shall conforming to Fe-290-0 (Gde E-165) complete all as specified and as directed. \nNote : Steel sheeting or other covering, running rail/ guides shall be measured and paid separately. | 2500 | Kg | |
| 130 | 130 | S&F for 1.00mm thick plain mild steel black sheet in covering to door, water tank, water trough, hole punched, including round headed screws, clout nails and fixed to wooden or steel frame/members, etc with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends complete all as specified and as directed. | 48 | Sqm | |
| 131 | 131 | M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed. | 100 | RM | |
| 132 | 132 | M&L for water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein below and as directed:- \n(a) Taking down existing old tarfelt, bituminous compound including plaster etc, cleaning & removing debris to a distance exceeding 100m & not exceeding 250m. \n(b) 15 mm thick plastering in cement mortar (1:4) finished even & smooth. \n(c) Preparing & cleaning of fully dried cement plastered surface. \n(d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 liters per sqm conforming to IS-3384 \n(e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm )shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. \n(f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm | 90 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
