Annual Repair And Maintenance Of To District Court Residential Complex , Saket , New Delhi Dg 2021-22 . ( Sh- Replacement Of Damaged Shutter , M . S . Tube Frame Of Door/Window , Wall Tiles , Plastering , Serviceable C . P . Fitting Shaft Alumi

Tender Notice

28195943
Annual Repair And Maintenance Of To District Court Residential Complex , Saket , New Delhi Dg 2021-22 . ( Sh- Replacement Of Damaged Shutter , M . S . Tube Frame Of Door/Window , Wall Tiles , Plastering , Serviceable C . P . Fitting Shaft Alumi
Indian
Delhi
15-06-2021
22-06-2021
22-06-2021

Tender Details

annual repair and maintenance of To District Court Residential Complex , Saket , New Delhi Dg 2021-22 . ( Sh- Replacement Of Damaged Shutter , M . S . Tube Frame Of Door/Window , Wall Tiles , Plastering , Serviceable C . P . Fitting Shaft Aluminum Frame/Shutter And Other Misc . --

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
INR 12.69 Lakhs /-

BOQ Items

Name of Work- A/R & M/O to District Court Residential Complex, Saket, New Delhi dg 2021-22. (SH: Replacement of damaged shutter, M.S. tube frame of door/window, wall tiles, plastering, serviceable C.P. fitting shaft aluminum frame/shutter and other misc. work at Judge's flats, Saket, Saket Court Complex, Saket).
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
2 1.01 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 29 sqm
3 2 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :
4 2.01 35 mm thick shutters.
5 2.02 with ISI marked M.S. pressed butt hinges bright finished of required size
6 2.03 Second class teak wood 32 sqm
7 3 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.
8 3.01 With 2nd class teak wood beading 62X19 mm 36 sqm
9 4 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
10 4.01 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 238.96 kg
11 5 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 405 sqm
12 6 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
13 6.01 Size of Tile 600x600 mm 55 sqm
14 7 12 mm cement plaster of mix :
15 7.01 1:6 (1 cement: 6 coarse sand) 104 sqm
16 8 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
17 8.01 Float glass panes of thickness 5.5 mm 24 sqm
18 9 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :
19 9.01 One or more coats on old work 490 sqm
20 10 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
21 10.01 One or more coats on old work 329 sqm
22 11 Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.
23 11.01 One or more coats on old work 323 sqm
24 12 Finishing walls with Acrylic Smooth exterior paint of required shade :
25 12.01 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface 715 sqm
26 13 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
27 13.01 For thickness of tiles 10 mm to 25 mm 166 sqm
28 14 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 341 sqm
29 15 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 32 cum
30 16 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
31 16.01 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 8 each
32 17 Providing and fixing white vitreous china water closet squatting pan (Indian type) :
33 17.01 Orissa pattern W.C. pan of size 580x440 mm 12 each
34 18 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
35 18.01 Flexible pipe
36 18.02 32 mm dia 70 each
37 19 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 20 each
38 20 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 20 each
39 21 Providing and fixing uplasticised PVC connection pipe with brass unions :
40 21.01 45 cm length
41 21.02 15 mm nominal bore 70 each
42 22 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
43 22.01 For fixed portion\nPowder coated aluminium (minimum thickness of powder coating 50 micron) 55.76 kg
44 22.02 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\nPowder coated aluminium (minimum thickness of powder coating 50 micron) 277.2 kg
45 23 Providing and fixing of C.P. Towel rack of size 24" long with five pipes of Jaquar make model no. ACN-1181FHS and equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. 14 Each
46 24 Providing and fixing of CP Angle valve with wall flange of Jaquar make model no. CON-059KN and equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. 28 Each
47 25 Providing and fixing of CP 2 in 1 Angle valve of Jaquar make MQT-526A and equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. 18 Each
48 26 Providing and fixing of CP BOTTLE TRAP of Jaquar make model no. ALD-769L300X190 and equivalent make as per direction of Engineer -in-Charge.Sample available in sub-Division I. 22 Each
49 27 Providing and fixing of Jet spray for English WC with 1 mtr. PVC tube (S.S.) of Kingston make model no. AGR-2015A and equivalent make as per direction of Engineer -in-Charge Sample available in sub-Division I. 24 Each
50 28 Providing and fixing of C.P. wall mixture with 115 mm long bend pipe, connecting legs and wall flange of Jaquar model no. CON-273KNUPR and equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. 14 Each
51 29 Providing and fixing of Jaquar Wash basin mixer make model no. CON-167KNB and equivalent as per direction of Engineer in charge. Sample available in sub-Division I. 16 Each
52 30 Providing and fixing of CP brass bib cock with wall flange of Jaquar make model no. CON-047KN and equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. 28 Each
53 31 Providing and fixing of CP over head shower 125 mm dia. with shower arm long round shape with wall flange of jaquar make model no. EOS-542S and equivalent make as per direction of Engineer -in-Charge. Sample available in sub-Division I. 24 Each
54 32 Providing and fixing of C.P. Shop disk of Jaquar make model no. ACN-1131N and equivalent make as per direction of Engineer -in Charge. Sample available in sub-Division I. 28 Each
55 33 Credit for old ply 360 Kg
56 34 Credit for dismantling C.P. Brass sanitary & water supply fittings as per Direction of Engineering-in-charge. 84 Each
57 35 Add 15.69% as cost index on DSR 2016 on Item No. 01 to 22 Rs. 9,64,382/- 1 each
58 36 Less 9.50% as per Delhi Govt. Circular on DSR 2016+C.I. i.e. on Rs. 11,15,694/- 1 each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail