Construction Of New Toilet Block With Cloak Room At South West Corner Of Clinical Services Building Construction Of New Toilet Block With Cloak Room At South West Corner Of Clinical Services Building At Aiish , Mysore

Tender Notice

28185062
Construction Of New Toilet Block With Cloak Room At South West Corner Of Clinical Services Building Construction Of New Toilet Block With Cloak Room At South West Corner Of Clinical Services Building At Aiish , Mysore
Indian
Karnataka
14-06-2021
05-07-2021
07-07-2021

Tender Details

Construction Of New Toilet Block With Cloak Room At South West Corner Of Clinical Services Building Construction Of New Toilet Block With Cloak Room At South West Corner Of Clinical Services Building At Aiish , Mysore

Key Value

Document Fees
INR 500 /-
EMD
INR 73260.00 /-
Tender Value
Refer document

BOQ Items

Name of Work: < Construction of New Toilet Block with Cloak Room at south west corner of Clinical services building, AIISH Main campus, Mysore>
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Electrical Items
2 1.01 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. item1 66.33 Cum
3 1.02 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. item2 70 Cum
4 1.03 Excavating, supplying and filling of local good earth( including royalty)by mechanical transport up to a lead of 5Km also including ramming and watering of the earth in layers not exceeding 20Cm in trenches ,plinth, sides of foundation etc. complete item3 14 Cum
5 1.04 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size item4 26.85 Cum
6 1.05 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level. 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). item5 15.35 Cum
7 1.06 Coursed rubble masonry (first sort) with hard stone in foundation & plinth with cement mortar 1:6 , 7.6.1 item6 25.59 Cum
8 1.07 Centering and shuttering including strutting, propping etc. and removal of form for all heights Columns, Pillars, Piers, Abutments, Posts and Struts item7 93.6 Sqm
9 1.08 centring and shuttering including strutting,propping etc.,and removal of form for all heights.Lintels, beams, plinth beams, girders, bressumers and cantilevers item8 136.56 Sqm
10 1.09 centring and shuttering including strutting,propping etc.,and removal of form for all heightsSuspended floors, roofs, landings, balconies and access platform item9 136 Sqm
11 1.1 Steel reinforcement for R.C.C. work including straightening,cutting,bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more item10 3815 Kgs
12 1.11 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level. item11 3 Cum
13 1.12 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level up to floor five level. item12 26.25 Cum
14 1.13 Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in With Cement Mortar 1 :4 ( 1 cement : 4 coarse sand) item13 1 Cum
15 1.14 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 7809.25 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 7590.45 item14 37.95 Cum
16 1.15 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in superstructure above plinth level up to6 floorV level.6.13.1 Cement mortar 1:4 (1 cement :4 coarse sand) item15 62.46 Sqm
17 1.16 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms. each 130.50 item16 6 Nos.
18 1.17 Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittingsarrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms. each 595.50 item17 6 Nos.
19 1.18 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved\nsteel primer item18 2.52 Sqm
20 1.19 Providing and laying anti skid Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete item19 95.7 Sqm
21 1.2 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. item20 176 Sqm
22 1.21 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters 80x1.25 mm M.S. laths with 1.25 mm thick top cover\n\n item21 2.88 Sqm
23 1.22 Providing and fixing ball bearing for rolling shutters item22 4 Nos.
24 1.23 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. item23 226 Kgs
25 1.24 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides.\nM.S. stay shall be provided at the bottom to steady the frame. item24 72 M
26 1.25 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge item25 25.2 Sqm
27 1.26 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand item26 52.2 Sqm
28 1.27 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110mm dia. including all fixures item27 48 M
29 1.28 providing and plastering wall with 15 mm cement plaster of mix in CM 1:6 item28 588 Sqm
30 1.29 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab withsuitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight ofstainless steel membersshall be considered excluding fixing accessories such as nuts, bolts,\nfasteners etc.). item29 60 Kgs
31 1.3 Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming\nprocess of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between\nframe and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. item30 10.8 Sqm
32 1.31 Providing and laying integral cement based water proofing treatmentincluding preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conforming toIS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height includingcleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compoundconforming to IS : 2645 and approved by Engineer-in-chargeover 20 mm thick layer of cement mortar of mix 1:5 (1 cement:5 coarse sand ) admixed with water proofing compoundconforming to IS : 2645 and approved by Engineer-in-charge torequired slope and treating similarly the adjoining walls upto300 mm height including rounding of junctions of walls ndslabs.(c) After two days of proper curing applying a second coat of cementslurry using 2.75 kg/ sqm of cement admixed with water proofingcompound conforming to IS : 2645 and approved by Engineerin-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :\n22.7.1 With average thickness of 120 mm and minimum\nthickness at khurra as 65 mm item31 95.7 Sqm
33 1.32 Providing and fixing factory made uPVC white colour casement/ Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket,zinc alloy (white powder coated) 3D hinges and one handle on each sideof panels along with zinc plated mild steel multi point locking havingtransmission gear, cylinder with keeps and one side key, G.I fasteners100 x 8 mm size for fixing frame to finished wall and necessary stainlesssteel screws, etc. Profile of frame & sash shall be mitred cut and fusionwelded at all corners, mullion (if required) shall be also fusion weldedincluding drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. sliding type for Specially abled. item32 4.4 Sqm
34 1.33 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm\nthick hard board backing Rectangular shape 453x357 mm\n item33 6 Nos.
35 1.34 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mmthick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth item34 20.7 Sqm
36 1.35 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests\n item35 6 Nos.
37 1.36 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid item36 4 Nos.
38 1.37 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard sizeC.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Range of Three urinal basins with 10 litre white P.V.C.automatic flushing cistern item37 4 Nos.
39 1.38 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever\nrequire: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap\n item38 6 Nos.
40 1.39 providing and fixing unplasticised PVC pipes with working pressure 10kg/sqcm with pipe fittings,clips,making good the floor including cost of all materials,labor charges,HOM and testing complete as per specifications 90mm OD item39 30 m
41 1.4 providing and fixing unplasticised PVC pipes with working pressure 10kg/sqcm with pipe fittings,clips,making good the floor including cost of all materials,labor charges,HOM and testing complete as per specifications 110mm OD item40 60 M
42 1.41 Health faucets of approved brand as per directions and specifications item41 10 Nos.
43 1.42 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : 19.28.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 5794.85\n item42 4 Nos.
44 1.43 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and makinggood the walls etc. 25mm dia. item43 110 M
45 1.44 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 25mm dia item44 90 M
46 1.45 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete item45 2 Nos.
47 1.46 Providing and fixing uplasticised PVC connection pipe with brass unions 45cm long 15mm nb item46 20 Nos.
48 1.47 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank item47 4000 Litres
49 1.48 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.18.15.2 20 mm nominal bore each. item48 17 Nos.
50 1.49 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to\nIS:8931.18.16.2 20 mm nominal bore each item49 17 Nos.
51 1.5 Providing and fixing PTMT grating of approved quality and colour 18.58.1.2 125 mm nominal dia with 25 mm waste hole each 51.25 item50 12 Nos.
52 1.51 Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) sqm item51 220 Sqm
53 1.52 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\n13.61.1 Two or more coats on new work sqm item52 9 Sqm
54 1.53 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :\n13.41.1 New work (two or more coats) over and including putty, water thinnable priming coat with cement primer sqm \n item53 194 Sqm
55 1.54 Supply and laying of A grade material of 25mm dia VIP make PVC pipe including bends, collar and junction box for RCC piping and wall piping (building consisting of 10nos of toilet rooms, 4nos of bath rooms, cloakroom, front canopy for seating arrangement and center passage) item54 150 M
56 1.55 Supply and fixing of 3way and 4way deep metal junction box item55 30 Nos.
57 1.56 Supply and fixing of metal fan box item56 5 Nos.
58 1.57 Supply and fixing of 12way single door metal DB box including of 40amps 4pole ELCBs – 01no and 2pole 20Amps ratted MCBs- 04nos item57 1 No.
59 1.58 Groove cutting for wall, fixing of 25mm dia PVC pipe item58 50 M
60 1.59 Supplying and drawing 2X4sq mm sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel/ PVC conduit as required. item59 150 M
61 1.6 Supplying and drawing 1X1.5sq mm sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel/ PVC conduit as required. item60 500 M
62 1.61 Supplying and drawing 2X2.5sq mm sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel/ PVC conduit as required item61 200 M
63 1.62 Supplying and fixing 6module of GI / modular box along with modular base & cover plate for modular switches in recess etc. as required. Make: MK blanze item62 6 Nos.
64 1.63 Supplying and fixing of 15/16amps modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required Make: MK blanze item63 6 Nos.
65 1.64 Supplying and fixing of 6pin 15/16amps modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required Make: MK blanze item64 6 Nos.
66 1.65 Supplying and fixing of 6pin 15/16amps modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required Make: MK blanze item65 6 Nos.
67 1.66 Supplying and fixing of 5/6amps modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required Make: MK blanze item66 50 Nos.
68 1.67 Supplying and fixing of 5/6amps modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required Make: MK blanze item67 10 Nos.
69 1.68 Supplying and fixing 12module of GI / modular box along with modular base & cover plate for modular switches in recess etc. as required. Make: MK blanze item68 4 Nos.
70 1.69 Supplying and fixing 03module of GI / modular box along with modular base & cover plate for modular switches in recess etc. as required. Make: MK blanze item69 5 Nos.
71 1.7 Digging of trench 1meter deep and 0.5mtr wide with refilling of trench upto the ground level item70 50 M
72 1.71 Supply and laying of 2.5kg pressure 4 inch dia HDPE pipe item71 50 M
73 1.72 Supply and laying of 25sq mm X 3 ½ coreX01runs aluminium conductor 1100V grade LT armored UG cable Make: Havells, Polycab item72 60 M
74 1.73 Supply and fixing of Heavy duty metal glands and lugs suitable for 25sq mm 3 ½ core UG cable item73 10 Nos.
75 1.74 Supply and fixing of 12watts circular type LED fittings Make : Crompton Philips item74 20 Nos.
76 1.75 Supply and fixing of 18/20watts 4feet length LED tube light fitting Make: Philips item75 6 Nos.
77 1.76 Supply and fixing of 12inch dia exhaust fans including all fixing materials item76 3 Nos.
78 1.77 Supply and fixing of 25watts LED street light fittings with 4feet bend pipe and all fixing materials item77 6 Nos.
79 1.78 Earthpit digging below the ground level of 8feet deep and 2feet wide item78 1 Nos.
80 1.79 Supply of earth station materials like charcoal, salt and 2inch dia GI pipe – 9feet, copper plate 2’X2’ size, funnel, nut bolt, chamber and chamber cover item79 1 Nos.
81 1.8 Supply and fixing of 25X3 GI strip for body earthing item80 20 M
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail