Construction Of Various Veterinary Hospital/Sub-Center In Assembly Dausa And Mahuwa Package-02/2021-22 ( Ridf-T-26 )

Tender Notice

28140598
Construction Of Various Veterinary Hospital/Sub-Center In Assembly Dausa And Mahuwa Package-02/2021-22 ( Ridf-T-26 )
Indian
Rajasthan
09-06-2021
21-06-2021
23-06-2021

Tender Details

construction of various veterinary hospital / sub-center in assembly dausa and mahuwa package-02 / 2021-22 ( ridf-t-26 )

Key Value

Document Fees
INR 1000 /-
EMD
Refer document
Tender Value
INR 82.32 Lakhs /-

BOQ Items

Name of Work: Const. of Various Veterinary Hospital/Sub-Center in Assembly Dausa and Mahuwa Package-02/2021-22 (RIDF-T-26)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 1. Construction of Veterinary Hospital (under Nabard RIDF-T-XXVI) at Kableshwar (Dausa) Distt. Dausa
2 2 Part-A Building Work
3 3 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils. 200 P.cum
4 4 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 ( 1 Cement:4 coarse sand : 8 graded stone aggregate 40 mm nominal size. 60 P.cum
5 5 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:1.5:3 ( 1 Cement:1.5coarse sand : 3 graded stone aggregate 40 mm nominal size. 4 P.Cum
6 6 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30CM thick wall in Cement Mortar 1:6 ( 1-Cement : 6-Sand). 198 P.Cum
7 7 Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. : Cement mortar 1 : 6 (1 cement : 6 coarse sand). 85 P.cum
8 8 Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand). 5 P.cum
9 9 Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand). 69 P.Sqm
10 10 Random rubble dry stone Kharanja under floor. 28 P.Cum
11 11 Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix. 11 P.Cum
12 12 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix 41 P.Cum
13 13 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft, bases of columns etc. 58 P.Sqm
14 14 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. 305 P.Sqm
15 15 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) 4680 P.Kg
16 16 P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm 48 P.sqm
17 17 Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks:\n1) Shape as defined by Engineer incharge\n2) Tensile splitting strength and braking load as per BS 6717:2001\n3) Color: Grey cement natural colour\n4) Variation in dimension: Less than 1.6mm.\n5) Variation in thickness: Less than 3.2mm\n6) Abrasion: As per BS: 6717:2001 94 P.Sqm
18 18 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu/Jalore (Red / Chocolate/Black/Pink Colour) Above 3601 Cm2 Slabs. 4 P.Sqm
19 19 Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work 7 P.Rmt
20 20 Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. 299 P.Kg.
21 21 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%]. 26 P.Sqm
22 22 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 23 P.Sqm
23 23 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. 233 P.Kg.
24 24 Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). 12 P.Sqm
25 25 Providing and fixing in CM 1:4 double paitam (rebated) stone door window and ventilator frames of approved quarry : Size 100 x 75mm. 78 P.Rmt.
26 26 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' 30 mm thick. Commercial Veneer Both Side. 28 P.Sqm
27 27 Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) For aboy item. 28 P.Sqm
28 28 Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured). 8 P.Sqm
29 29 Providing and fixing M.S. sheet 1mm thick double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 2 P.Sqm
30 30 Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. Extra for providing D type pipe head as top of hand railing. 63 P.Kg
31 31 Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 14 P.Cum
32 32 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. 66 P.Mtr
33 33 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick. 554 P.Sqm
34 34 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :12mm thick. 620 P.Sqm
35 35 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) 151 P.Sqm
36 36 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 76 P.Sqm
37 37 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 7 P.Sqm
38 38 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. 1050 P.Sqm
39 39 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 554 P.Sqm
40 40 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 695 P.Sqm
41 41 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. 180 P.Sqm
42 42 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick For area of each slab from 2001 to 5000 Sq.Cm. 97 P.Sqm
43 43 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Medium shade using approximately 50% white cement and 50% ordinary cement. 59 P.Sqm
44 44 Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification: 11 P.Sqm
45 45 Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design. 52 P.Mtr.
46 46 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate. 3 P.Sqm
47 47 Supplying and Filling in plinth with sandy soil free from deleterious and organic material under floors including watering ramming consolidating and dressing complete including cost of sandy soil with all lead and lift. 199 P.Cum
48 48 Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification : 12 P.Sqm
49 49 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 200 P.Kg.
50 50 150 cm high fencing of precast R.C. posts of 15cmx15cm tapered to 10x10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth posts to be strutted with same R.C. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete 50 P.Mtr.
51 51 Add for each wire line over basic item 100 P.Mtr.
52 52 Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material 27 P.Cum
53 53 Part-B Sanitary Work
54 54 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. 1 Each
55 55 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 2 Each
56 56 P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:
57 57 15 mm dia normail ber B- class 20 P.mtr
58 58 25 mm Dia B class. 5 P.mtr
59 59 Making connection of G.I. distribution branch with G.I. main including all fitting.Upto 25mm dia. 1 Each
60 60 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore. 4 Each
61 61 P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:C.P. Brass 15mm nominal bore. 2 Each
62 62 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity. 2 Each
63 63 Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size :
64 64 15mm dia nominal bore 4 Each
65 65 25mm dia nominal bore 2 Each
66 66 P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt.400 gm,15mm. 2 Each
67 67 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.
68 68 110 mm dia. 40 P.mtr
69 69 75 mm dia. 20 P.mtr
70 70 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 45
71 71 110mm dia. 16 Each
72 72 75mm dia. 8 Each
73 73 P & F Push Cock superior quality, of approved make C.P. Brass 15 mm. 2 Each
74 74 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.
75 75 Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. 3 Each
76 76 Inside size 450 x 450mm depth upto 0.5 M Cement cover with frame 2 Each
77 77 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 200 x100 x130 cm.(for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10 mm dia @ 15 cm C/C bothways including shuttering complete in all respect. 1 Each
78 78 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm. 2 Each
79 79 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS : 7231. 3 Each
80 80 P & F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make.For 3 Urinal. 1 Each
81 81 P&F C.P. brass Urinal Spreader for stall urinal of approved make. 3 Each
82 82 P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 580 mm x 450 mm 3 Each
83 83 P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick commercial ply base fixed to wooden screws & washers. Other sizes. 3 Each
84 84 P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia. 5 Each
85 85 P & F jet spray for water closet with C.P. copper Tube flangr of approved make. 2 Each
86 86 P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. Makrana II quality marble having light spots. 2 Each
87 87 Part-C Electric Work
88 88 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box of 20 SWG with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. (Group I)
89 89 Short point (up to 3 mtr.) 15 EACH
90 90 Medium point (up to 6 mtr.) 20 EACH
91 91 Long point (up to 10 mtr..) 10 EACH
92 92 Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. (Group I)
93 93 On board 13 EACH
94 94 S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit with Wire mesh and making good the same as required.
95 95 25 mm (Group I) 150 P.MTR
96 96 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. (Group I)
97 97 2 x 2.5 sq. mm. + 1x1.5sqmm 85 P.MTR
98 98 2 x 4 sq. mm. + 1x2.5sqmm 120 P.MTR
99 99 P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections with lugs , testing etc. as required.(Group I)
100 100 Four pole Isolator
101 101 63 A rating 1 EACH
102 102 P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. (Group I) 10 EACH
103 103 P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.(Group I) 20 EACH
104 104 P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.(Group I)
105 105 Single pole MCB
106 106 6 A to 32 A rating 12 EACH
107 107 P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.(Group I)
108 108 Double door (Three phase)
109 109 4 Way 1 EACH
110 110 P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required
111 111 5 step fan regulator 2 Module (Group I) 11 EACH
112 112 Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular box of 20 SWG on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(Group I) 17 EACH
113 113 P&F of IP 20 LED tube light 20 Watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light,integral driver,2000 lumen+5% tolerance system kumen efficacy of 100Lm/W minimum expected life time of 25000 burning hours,.CCT 5700K,ANSI,CRI 80,driver efficiency>85%,life expectancy of driver minimum 30000 hrs.P.F 0.95 at full load/230V AC(Group I) 13 EACH
114 114 P & F extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd. 8 P.MTR
115 115 P & F ISI marked single tone electronic call bell including making connection testing etc. as required.(Group II) 1 EACH
116 116 P & F of IP 20 surface/recess mounted LED down light made of pressure die cast aluminum housing, with heat sink and good quality reflector, high efficiency external driver power consumption 14/15 watt, system lumen efficiency>80 lumen/watt. CCT 6000K (minimum) K, CRI>80, PF>0.9 life time 50,000 burning hours. (Group-I) 11 EACH
117 117 Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.
118 118 With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating
119 119 GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip 1 EACH
120 120 S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
121 121 8 SWG G.I. ( Hot Dipped ) Wire 16 P.MTR
122 122 P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.(Group I)
123 123 300 mm sweep 3 EACH
124 124 P & F 1200 mm Sweep BEE 5 Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979, I/p 50 Watt at max speed & 230 Volt, air delivery >210 CMM, Speed > 330 RPM with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. (Group-I) 12 EACH
125 125 P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . 12 EACH
126 126 P & F of IP 65 protected LED Street Light fixture 70-75 Watt (with surge protection device 10KA) applicable for area lighting with extruded pressure die cast aluminum housing, system lumens efficacy of 100 lm/watt minimum, toughened glass with diffuser, suitable lenses on LED, 240V, 50 Hz of High Power LED lamps supplied with prewired cable of 1 mts. Integrated Driver shall be high efficiency having efficiency>85% and in compliance to IEC standards System life of 50,000 Burning Hours, CRI>80, PF>0.90 at full load, CCT 5700-6500 K (as per direction of Engineer in charge). Fixtures shall be CE compliance.(Group I). 2 EACH
127 127 S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.
128 128 32 mm Dia. 2 P.MTR
129 129 P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
130 130 16.0 Sq.mm
131 131 4 core (Armoured) 50 P.MTR
132 132 SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. (Group I)
133 133 0.5 HP, 1-Ø, (6-28)Mtr, (52-12)LPM 1 EACH
134 134 Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity. (Group I)
135 135 6 kg 1 EACH
136 136 2. Construction of Veterinary Hospital (under Nabard RIDF-T-XXVI) at Malwas (Lawan) Distt. Dausa
137 137 Part-A Building Work
138 138 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils. 200 P.cum
139 139 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 ( 1 Cement:4 coarse sand : 8 graded stone aggregate 40 mm nominal size. 60 P.cum
140 140 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:1.5:3 ( 1 Cement:1.5coarse sand : 3 graded stone aggregate 40 mm nominal size. 4 P.Cum
141 141 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30CM thick wall in Cement Mortar 1:6 ( 1-Cement : 6-Sand). 198 P.Cum
142 142 Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. : Cement mortar 1 : 6 (1 cement : 6 coarse sand). 85 P.cum
143 143 Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand). 5 P.cum
144 144 Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand). 69 P.Sqm
145 145 Random rubble dry stone Kharanja under floor. 28 P.Cum
146 146 Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix. 11 P.Cum
147 147 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix 41 P.Cum
148 148 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft, bases of columns etc. 58 P.Sqm
149 149 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. 305 P.Sqm
150 150 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) 4680 P.Kg
151 151 P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm 48 P.sqm
152 152 Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks:\n1) Shape as defined by Engineer incharge\n2) Tensile splitting strength and braking load as per BS 6717:2001\n3) Color: Grey cement natural colour\n4) Variation in dimension: Less than 1.6mm.\n5) Variation in thickness: Less than 3.2mm\n6) Abrasion: As per BS: 6717:2001 94 P.Sqm
153 153 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu/Jalore (Red / Chocolate/Black/Pink Colour) Above 3601 Cm2 Slabs. 4 P.Sqm
154 154 Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work 7 P.Rmt
155 155 Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. 299 P.Kg.
156 156 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%]. 26 P.Sqm
157 157 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 23 P.Sqm
158 158 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. 233 P.Kg.
159 159 Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). 12 P.Sqm
160 160 Providing and fixing in CM 1:4 double paitam (rebated) stone door window and ventilator frames of approved quarry : Size 100 x 75mm. 78 P.Rmt.
161 161 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' 30 mm thick. Commercial Veneer Both Side. 28 P.Sqm
162 162 Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) For aboy item. 28 P.Sqm
163 163 Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured). 8 P.Sqm
164 164 Providing and fixing M.S. sheet 1mm thick double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 2 P.Sqm
165 165 Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. Extra for providing D type pipe head as top of hand railing. 63 P.Kg
166 166 Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 14 P.Cum
167 167 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. 66 P.Mtr
168 168 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick. 554 P.Sqm
169 169 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :12mm thick. 620 P.Sqm
170 170 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) 151 P.Sqm
171 171 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 76 P.Sqm
172 172 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 7 P.Sqm
173 173 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. 1050 P.Sqm
174 174 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 554 P.Sqm
175 175 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 695 P.Sqm
176 176 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. 180 P.Sqm
177 177 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick For area of each slab from 2001 to 5000 Sq.Cm. 97 P.Sqm
178 178 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Medium shade using approximately 50% white cement and 50% ordinary cement. 59 P.Sqm
179 179 Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification: 11 P.Sqm
180 180 Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design. 52 P.Mtr.
181 181 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate. 3 P.Sqm
182 182 Supplying and Filling in plinth with sandy soil free from deleterious and organic material under floors including watering ramming consolidating and dressing complete including cost of sandy soil with all lead and lift. 199 P.Cum
183 183 Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification : 12 P.Sqm
184 184 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 200 P.Kg.
185 185 150 cm high fencing of precast R.C. posts of 15cmx15cm tapered to 10x10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth posts to be strutted with same R.C. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete 50 P.Mtr.
186 186 Add for each wire line over basic item 100 P.Mtr.
187 187 Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material 27 P.Cum
188 188 Part-B Sanitary Work
189 189 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. 1 Each
190 190 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 2 Each
191 191 P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:
192 192 15 mm dia normail ber B- class 20 P.mtr
193 193 25 mm Dia B class. 5 P.mtr
194 194 Making connection of G.I. distribution branch with G.I. main including all fitting.Upto 25mm dia. 1 Each
195 195 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore. 4 Each
196 196 P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:C.P. Brass 15mm nominal bore. 2 Each
197 197 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity. 2 Each
198 198 Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size :
199 199 15mm dia nominal bore 4 Each
200 200 25mm dia nominal bore 2 Each
201 201 P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt.400 gm,15mm. 2 Each
202 202 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.
203 203 110 mm dia. 40 P.mtr
204 204 75 mm dia. 20 P.mtr
205 205 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 45
206 206 110mm dia. 16 Each
207 207 75mm dia. 8 Each
208 208 P & F Push Cock superior quality, of approved make C.P. Brass 15 mm. 2 Each
209 209 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.
210 210 Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. 3 Each
211 211 Inside size 450 x 450mm depth upto 0.5 M Cement cover with frame 2 Each
212 212 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 200 x100 x130 cm.(for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10 mm dia @ 15 cm C/C bothways including shuttering complete in all respect. 1 Each
213 213 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm. 2 Each
214 214 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS : 7231. 3 Each
215 215 P & F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make.For 3 Urinal. 1 Each
216 216 P&F C.P. brass Urinal Spreader for stall urinal of approved make. 3 Each
217 217 P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 580 mm x 450 mm 3 Each
218 218 P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick commercial ply base fixed to wooden screws & washers. Other sizes. 3 Each
219 219 P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia. 5 Each
220 220 P & F jet spray for water closet with C.P. copper Tube flangr of approved make. 2 Each
221 221 P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. Makrana II quality marble having light spots. 2 Each
222 222 Part-C Electric Work
223 223 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box of 20 SWG with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. (Group I)
224 224 Short point (up to 3 mtr.) 15 EACH
225 225 Medium point (up to 6 mtr.) 20 EACH
226 226 Long point (up to 10 mtr..) 10 EACH
227 227 Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. (Group I)
228 228 On board 13 EACH
229 229 S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit with Wire mesh and making good the same as required.
230 230 25 mm (Group I) 150 P.MTR
231 231 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. (Group I)
232 232 2 x 2.5 sq. mm. + 1x1.5sqmm 85 P.MTR
233 233 2 x 4 sq. mm. + 1x2.5sqmm 120 P.MTR
234 234 P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections with lugs , testing etc. as required.(Group I)
235 235 Four pole Isolator
236 236 63 A rating 1 EACH
237 237 P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. (Group I) 10 EACH
238 238 P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.(Group I) 20 EACH
239 239 P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.(Group I)
240 240 Single pole MCB
241 241 6 A to 32 A rating 12 EACH
242 242 P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.(Group I)
243 243 Double door (Three phase)
244 244 4 Way 1 EACH
245 245 P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required
246 246 5 step fan regulator 2 Module (Group I) 11 EACH
247 247 Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular box of 20 SWG on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(Group I) 17 EACH
248 248 P&F of IP 20 LED tube light 20 Watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light,integral driver,2000 lumen+5% tolerance system kumen efficacy of 100Lm/W minimum expected life time of 25000 burning hours,.CCT 5700K,ANSI,CRI 80,driver efficiency>85%,life expectancy of driver minimum 30000 hrs.P.F 0.95 at full load/230V AC(Group I) 13 EACH
249 249 P & F extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd. 8 P.MTR
250 250 P & F ISI marked single tone electronic call bell including making connection testing etc. as required.(Group II) 1 EACH
251 251 P & F of IP 20 surface/recess mounted LED down light made of pressure die cast aluminum housing, with heat sink and good quality reflector, high efficiency external driver power consumption 14/15 watt, system lumen efficiency>80 lumen/watt. CCT 6000K (minimum) K, CRI>80, PF>0.9 life time 50,000 burning hours. (Group-I) 11 EACH
252 252 Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.
253 253 With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating
254 254 GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip 1 EACH
255 255 S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
256 256 8 SWG G.I. ( Hot Dipped ) Wire 16 P.MTR
257 257 P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.(Group I)
258 258 300 mm sweep 3 EACH
259 259 P & F 1200 mm Sweep BEE 5 Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979, I/p 50 Watt at max speed & 230 Volt, air delivery >210 CMM, Speed > 330 RPM with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. (Group-I) 12 EACH
260 260 P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . 12 EACH
261 261 P & F of IP 65 protected LED Street Light fixture 70-75 Watt (with surge protection device 10KA) applicable for area lighting with extruded pressure die cast aluminum housing, system lumens efficacy of 100 lm/watt minimum, toughened glass with diffuser, suitable lenses on LED, 240V, 50 Hz of High Power LED lamps supplied with prewired cable of 1 mts. Integrated Driver shall be high efficiency having efficiency>85% and in compliance to IEC standards System life of 50,000 Burning Hours, CRI>80, PF>0.90 at full load, CCT 5700-6500 K (as per direction of Engineer in charge). Fixtures shall be CE compliance.(Group I). 2 EACH
262 262 S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.
263 263 32 mm Dia. 2 P.MTR
264 264 P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
265 265 16.0 Sq.mm
266 266 4 core (Armoured) 50 P.MTR
267 267 SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. (Group I)
268 268 0.5 HP, 1-Ø, (6-28)Mtr, (52-12)LPM 1 EACH
269 269 Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity. (Group I)
270 270 6 kg 1 EACH
271 271 3. Const. Of Veterinary Subcenter (under Nabard RIDF-T-XXVI) at Ront (Mahwa), Distt. Dausa
272 272 PART 'A' - BUILDING WORK
273 273 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils. 106 P.Cum
274 274 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 34 P.Cum
275 275 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 40mm nominal size). 4 P.Cum
276 276 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 105 P.Cum
277 277 Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix. 3.33 P.Cum
278 278 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix. 13 P.Cum
279 279 Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks. Cement mortar 1 : 6 (1 cement : 6 coarse sand). 5 P.Cum
280 280 Brick work with clay flyash F.P.S. brick of class designation 75 in superstructure above plinth level upto floor five level in : Cement mortar 1 : 4 (1 cement : 4 coarse sand). 48 P.Cum
281 281 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code). 1470 P.Kg
282 282 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. 11.55 P.Sqm
283 283 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. 113 P.Sqm
284 284 Supplying and Filling in plinth with sandy soil free from deleterious and organic material under floors including watering ramming consolidating and dressing complete including cost of sandy soil with all lead and lift. 54 P.Cum
285 285 Random Rubble Dry Stone Kharanja under floor 12 P.Cum
286 286 Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 4 (1 cement : 4 coarse sand). 42.54 P.Sqm
287 287 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick For area of each slab from 2001 to 5000 Sq.Cm. 39 P.Sqm
288 288 P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm. 37 P.Sqm
289 289 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 23 P.Sqm
290 290 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 5 P.Sqm
291 291 Providing and fixing M.S. sheet 1mm thick double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 3 P.Sqm
292 292 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :30 mm thick .Commercial Veneer both side 11 P.Sqm
293 293 Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. 11 P.Sqm
294 294 Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured). 3 P.Sqm
295 295 Grading roof for water proofing treatment with water proffing compound. Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 4 P.Cum
296 296 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 12 mm thick. 277 P.Sqm
297 297 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20 mm thick. 477 P.Sqm
298 298 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) 63 P.Sqm
299 299 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. 477 P.Sqm
300 300 Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturer's specification. Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 340 P.Sqm
301 301 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 Sqm ). 477 P.Sqm
302 302 Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). 5 P.Sqm
303 303 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :
304 304 Partly fixed and partly openable [fixed area not to exceed 33%] 10.5 P.Sqm
305 305 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 10.5 P.Sqm.
306 306 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. 67 P.Kg
307 307 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 81 P.Sqm
308 308 Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification : 19 P.Sqm
309 309 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. 300 P.Kg
310 310 Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry : Size 75 x 60mm 10.37 P.Rmt
311 311 Providing and fixing in CM 1:4 double paitam (rebated) stone door window and ventilator frames of approved quarry : Size 100 x 75mm. 22 P.Rmt
312 312 Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Sand or other approved stone 50mm thick. 15 P.Sqm
313 313 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate. 42 P.Sqm
314 314 150 cm high fencing of precast R.C. posts of 15cmx15cm tapered to 10x10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth posts to be strutted with same R.C. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete 150 P.Mtr
315 315 Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks:\n1) Shape as defined by Engineer incharge\n2) Tensile splitting strength and braking load as per BS 6717:2001\n3) Color: Grey cement natural colour\n4) Variation in dimension: Less than 1.6mm.\n5) Variation in thickness: Less than 3.2mm\n6) Abrasion: As per BS: 6717:2001 35 P.Cum
316 316 Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material 11 P.Cum
317 317 PART 'B' - SANITARY WORK
318 318 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. 1 Each
319 319 P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor. 1 Each
320 320 P & F water closet Seat Covers with brass hinges complete : (IS : 2548 Marked) Solid PVC (ISI marked) grade-I White for EWC. 1 Each
321 321 P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS : 7231 2 Each
322 322 P&F Beveled edge mirror of special glass of appd make (Atul/equivalent) complet with 6mm thick asbestos cemetn sheet ground fixed to wooden scrwes & washers. Size 600 x 450mm x 4mm thick 2 Each
323 323 P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : Exposed on wall
324 324 (A) 15 mm dia nominal bore 'B' Class 25 P.Mtr.
325 325 (B) 25 mm dia nominal bore 'B' Class 10 P.Mtr.
326 326 P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 510 mm x 400 mm 1 Each
327 327 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass bib cock,15mm nominal bore. 2 Each
328 328 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :
329 329 (a) Gun-metal 15mm nominal bore. 2 Each
330 330 (b) Gun-metal 25mm nominal bore. 2 Each
331 331 P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. 1000 litre capacity 1 Each
332 332 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked). 6 Each
333 333 P & F 15 mm. Dia Connection pipe of approved quality/make: PVC pipe with C.P. Brass nuts up to length 600 mm. 6 Each
334 334 P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. 1 Each
335 335 P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete. Mini stall size 455x385x350mm. 2 Each
336 336 P & F C.P. brass Urinal Spreader for stall urinal of approved make. 2 Each
337 337 P&F Jet spray for water closet with C.P. copper tube flange of approved make 1 Each
338 338 P&F Grating of approved quality/ make Square 150x150x8mm (Anti Cockroach) 6 Each
339 339 P&F Soap dish or tray of approved quality/ make. C.P. brass heavy and superior quality 2 Each
340 340 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.
341 341 (a) 110mm dia 50 P.Mtr.
342 342 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5 dg.
343 343 (A) Plain Tee, 110mm dia 4 Each
344 344 (B) Bend 45 dg., 110mm dia 10 Each
345 345 (C) Bend 87.5 dg., 110mm dia 5 Each
346 346 (D) Vent cowel 110 mm dia 2 Each
347 347 (E) Pipe Clip 110 mm 20 Each
348 348 Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 10mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.
349 349 (A) Inside size 300x300mm depth upto 0.5m & 5Kg C.I. cover with frame 2 Each
350 350 (B) Inside size 450x450mm depth upto 0.5m & 5Kg C.I. cover with frame 1 Each
351 351 Making connection of G.I. distribution branch with G.I. main including all fitting. Up to 25 mm dia. 1 Each
352 352 Construction of septic tank in all types of soil with 40cm thick masonry in CM 1:6 15cm thick CC bed of 1:5:10 M-15 grade CC flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3, Ralthal, Kharanja, 50mm thick stone partiton walls, 20mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos C.I. foot rests of approved design, two No. 450mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing incl. disposal of surplus earth wtihin a lead of 50mtr.Size 200x100x130cm (for 10users) 1 Each
353 353 PART 'C' - ELECTRIC WORK
354 354 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. (GROUP II)
355 355 Short point (up to 3 mtr.) 12 Each
356 356 Medium point (up to 6 mtr.) 10 Each
357 357 Long point (up to 10 mtr..) 6 Each
358 358 Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. (GROUP II)
359 359 On board 8 Each
360 360 S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. (GROUP II)
361 361 25 mm 75 P. mtr
362 362 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. (GROUP II)
363 363 2 x 2.5 sq. mm. + 1x1.5sqmm 60 P. mtr
364 364 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 60 P. mtr
365 365 Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(GROUP II) 7 Each
366 366 P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. (GROUP I)
367 367 Single pole MCB
368 368 6 A to 32 A rating 10 Each
369 369 P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. (GROUP I)
370 370 Double pole Isolator
371 371 30 A / 40 A rating 1 Each
372 372 P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. (GROUP I)
373 373 Double door (Single phase)
374 374 12 Way 1 Each
375 375 P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. (Group II) 8 Each
376 376 P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.(Group II) 7 Each
377 377 P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required (Group II)
378 378 5 step fan regulator 2 Module 6 Each
379 379 P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
380 380 10.0 Sq.mm (Group II)
381 381 2 core 50 P. mtr
382 382 Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.
383 383 With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating
384 384 GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip 1 Each
385 385 S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
386 386 8 SWG G.I. ( Hot Dipped ) Wire 10 P. mtr
387 387 S & Laying following size' B ' class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required
388 388 40 mm dia. 6 P. mtr
389 389 P & F 1200 mm Sweep BEE 5 Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979, I/p 50 Watt at max speed & 230 Volt, air delivery >210 CMM, Speed > 330 RPM with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. (Group-I) 6 Each
390 390 P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . 6 Each
391 391 P&F of IP 20 LED tube light 20 Watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light,integral driver,2000 lumen+5% tolerance system kumen efficacy of 100Lm/W minimum expected life time of 25000 burning hours,.CCT 5700K,ANSI,CRI 80,driver efficiency>85%,life expectancy of driver minimum 30000 hrs.P.F 0.95 at full load/230V AC(Group-I) 8 Each
392 392 P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required. 1 Each
393 393 P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.(Group I)
394 394 300 mm sweep 1 Each
395 395 P & F extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd. 5 P. mtr
396 396 SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. (Group I)
397 397 0.5 HP, 1-Ø, (6-28)Mtr, (52-12)LPM 1 EACH
398 398 Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity. (Group I)
399 399 6 kg 1 EACH
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail