Construction Of Various Veterinary Hospital/Sub-Center In Assembly Bassi And Chaksu Package-03/2021-22 ( Ridf-T-26 ), Bassi, Chaksu-Rajasthan

TDR : 28140581

Tender Notice
BOQ

Expired

Bassi, Chaksu , Rajasthan

Tender Brief : Construction Of Various Veterinary Hospital/Sub-Center In Assembly Bassi And Chaksu Package-03/2021-22 ( Ridf-T-26 )

Document Fees
₹ 1000 /-

EMD
Refer document

Tender Value
₹ 1.31 Crore /-

Submission Date
21-06-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Const. of Various Veterinary Hospital/Sub-Center in Assembly Bassi and Chaksu Package-03/2021-22 (RIDF-T-26)
1	1	1. Construction of Veterinary Hospital (under Nabard RIDF-T-XXVI) at Devgaon Bassi Distt. Jaipur
2	2	Part-A Building Work
3	3	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils.	198	P.cum
4	4	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 ( 1 Cement:4 coarse sand : 8 graded stone aggregate 40 mm nominal size.	54	P.cum
5	5	Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30CM thick wall in Cement Mortar 1:6 ( 1-Cement : 6-Sand).	208	P.Cum
6	6	Brick work with clay flyash F.P.S. brick (IS 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)	72	P.cum
7	7	Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand).	5	P.cum
8	8	Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 75 in superstructure above plinth level upto floor V level in. . Cement mortar 1 : 4 (1 cement : 4 coarse sand).	69	P.Sqm
9	9	Random rubble dry stone Kharanja under floor.	28	P.Cum
10	10	Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix.	10	P.Cum
11	11	Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix/Design Mix	41	P.Cum
12	12	Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft, bases of columns etc.	54	P.Sqm
13	13	Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.	310	P.Sqm
14	14	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code)	4998	P.Kg
15	15	P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm	48	P.sqm
16	16	Providing and laying of paver block as per IS 15658 : 2006 (indian standardf for precast concrete block for paving - specification ) and IRC : SP:63 - 2004 ( guidelines for the use of interlocking concrete block pavement), M-30, 60 mm thic to used in non traffic areas like building premises, monument premises, land scapes, public gardens/ park, domestic drives, paths and patios, Embankment slaopes, sand stabilization area etc. (As per table 1 of IS 15658 : 2006), Category 'B' Dented only two side like I, Z, T shapes etc. as per IRC SP 63:2004.	94	P.Sqm
17	17	Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu/Jalore (Red / Chocolate/Black/Pink Colour) Above 3601 Cm2 Slabs.	4	P.Sqm
18	18	Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite / Kota stone work, Full Edge moulding.	7	P.Rmt
19	19	Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.	634	P.Kg.
20	20	Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%].	26	P.Sqm
21	21	Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.	23	P.Sqm
22	22	Providing and fixing Square bars or other flat welded to window, ventilatiors etc.	233	P.Kg.
23	23	Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).	12	P.Sqm
24	24	Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry : Size 75 x 60mm	30	P.Rmt.
25	25	Providing and fixing in CM 1:4 double paitam (rebated) stone door window and ventilator frames of approved quarry : Size 100 x 75mm.	48	P.Rmt.
26	26	Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' 30 mm thick. Commercial Veneer Both Side.	28	P.Sqm
27	27	Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) For aboy item.	28	P.Sqm
28	28	Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured).	11	P.Sqm
29	29	Providing and fixing 1mm thick M.S. sheet garrage door shutters with frame of 40 x 40 x 6mm. angle iron 3mm M.S. gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer : (Excluding cost of frames) Using M.S. angles 40 x 40 x 6mm for diagonal braces.	2	P.Sqm
30	30	Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. Extra for providing D type pipe head as top of hand railing.	63	P.Kg
31	31	Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).	14	P.Cum
32	32	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design.	66	P.Mtr
33	33	Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick.	451	P.Sqm
34	34	Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :12mm thick.	620	P.Sqm
35	35	6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)	151	P.Sqm
36	36	Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).	76	P.Sqm
37	37	Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).	12	P.Sqm
38	38	Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.	76	P.Sqm
39	39	Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete.	1032	P.Sqm
40	40	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.	620	P.Sqm
41	41	Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).	526	P.Sqm
42	42	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.	185	P.Sqm
43	43	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick For area of each slab from 2001 to 5000 Sq.Cm.	88	P.Sqm
44	44	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Medium shade using approximately 50% white cement and 50% ordinary cement.	59	P.Sqm
45	45	Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification:	11	P.Sqm
46	46	Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design.	52	P.Mtr.
47	47	Making grooves as per design in plaster 10mm to 20mm wide.	240	P.Mtr.
48	48	Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.	478	P.Cum
49	49	Carriage of Earth, Sand, Lime, Morrum, Manure or Sludge including Loading & Unloading upto 2.00 km. Lead	307	P.Cum
50	50	Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering.M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).	5	P.Cum
51	51	Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone minimum 30mm thick.	38	P.sqm
52	52	Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:20 mm	17	P.Rmt
53	53	150cm high fencing with angle iron 50x50x6mm. placed at every 3Mtr. apart 30cm. in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with 50x50x6mm. angle iron provided with 5 horizontal lines and two diagonals of black barbed wire between two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete.	85	P.Rmt
54	54	Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. for Grading III Material	19	P.Cum
55	55	Part-B Sanitary Work
56	56	P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.	1	Each
57	57	P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor	2	Each
58	58	P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : Exposed on wall
59	59	(A) 15 mm dia normail ber B- class	40	P.mtr
60	60	(B) 25 mm Dia B class.	5	P.mtr
61	61	Making connection of G.I. distribution branch with G.I. main including all fitting.Upto 25mm dia.	1	Each
62	62	P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore.	4	Each
63	63	P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:C.P. Brass 15mm nominal bore.	2	Each
64	64	P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity.	2	Each
65	65	Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size :
66	66	15mm dia nominal bore	4	Each
67	67	25mm dia nominal bore	2	Each
68	68	P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt.300 gm,15mm.	2	Each
69	69	P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.
70	70	110 mm dia.	60	P.mtr
71	71	P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:
72	72	(A) Bend 45 dg., 110mm dia	5	Each
73	73	(B) Bend 87.5 dg., 110mm dia	5	Each
74	74	(C) Vent cowel 110 mm dia	2	Each
75	75	(D) Pipe Clip 110 mm	20	Each
76	76	P & F Push Cock superior quality, of approved make C.P. Brass 15 mm.	2	Each
77	77	Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.
78	78	Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame.	3	Each
79	79	Inside size 450 x 450mm depth upto 0.5 M Cement cover with frame	2	Each
80	80	Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring, earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: Size 300 Cm. dia outside & 300 Cm. depth.	1	Each
81	81	Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 200 x100 x130 cm.(for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10 mm dia @ 15 cm C/C bothways including shuttering complete in all respect.	1	Each
82	82	P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm.	3	Each
83	83	P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS : 7231.	3	Each
84	84	P & F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make.For 3 Urinal.	1	Each
85	85	P&F C.P. brass Urinal Spreader for stall urinal of approved make.	3	Each
86	86	P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 580 mm x 450 mm	4	Each
87	87	P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick commercial ply base fixed to wooden screws & washers. Other sizes.	3	Each
88	88	P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia.	5	Each
89	89	P & F jet spray for water closet with C.P. copper Tube flangr of approved make.	2	Each
90	90	P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. Makrana II quality marble having light spots.	2	Each
91	91	P & F water closet Seat Covers with brass hinges complete : (IS : 2548 Marked) Solid PVC (ISI marked) grade-I White for EWC.	2	Each
92	92	P&F Soap dish or tray of approved quality/ make. C.P. brass heavy and superior quality	3	Each
93	93	Part-C Electric Work
94	94	Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box of 20 SWG with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. (Group I)
95	95	Short point (up to 3 mtr.)	15	EACH
96	96	Medium point (up to 6 mtr.)	20	EACH
97	97	Long point (up to 10 mtr..)	10	EACH
98	98	Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. (Group I)
99	99	On board	13	EACH
100	100	S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit with Wire mesh and making good the same as required.
101	101	25 mm (Group I)	150	P.MTR
102	102	Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. (Group I)
103	103	2 x 2.5 sq. mm. + 1x1.5sqmm	85	P.MTR
104	104	2 x 4 sq. mm. + 1x2.5sqmm	120	P.MTR
105	105	P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections with lugs , testing etc. as required.(Group I)
106	106	Four pole Isolator
107	107	63 A rating	1	EACH
108	108	P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. (Group I)	10	EACH
109	109	P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.(Group I)	20	EACH
110	110	P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.(Group I)
111	111	Single pole MCB
112	112	6 A to 32 A rating	12	EACH
113	113	P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.(Group I)
114	114	Double door (Three phase)
115	115	4 Way	1	EACH
116	116	P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required
117	117	5 step fan regulator 2 Module (Group I)	11	EACH
118	118	Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular box of 20 SWG on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(Group I)	17	EACH
119	119	P&F of IP 20 LED tube light 20 Watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light,integral driver,2000 lumen+5% tolerance system kumen efficacy of 100Lm/W minimum expected life time of 25000 burning hours,.CCT 5700K,ANSI,CRI 80,driver efficiency>85%,life expectancy of driver minimum 30000 hrs.P.F 0.95 at full load/230V AC(Group I)	13	EACH
120	120	P & F extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd.	8	P.MTR
121	121	P & F ISI marked single tone electronic call bell including making connection testing etc. as required.(Group II)	1	EACH
122	122	P & F of IP 20 surface/recess mounted LED down light made of pressure die cast aluminum housing, with heat sink and good quality reflector, high efficiency external driver power consumption 14/15 watt, system lumen efficiency>80 lumen/watt. CCT 6000K (minimum) K, CRI>80, PF>0.9 life time 50,000 burning hours. (Group-I)	11	EACH
123	123	Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.
124	124	With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating
125	125	GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip	1	EACH
126	126	S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
127	127	8 SWG G.I. ( Hot Dipped ) Wire	16	P.MTR
128	128	P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.(Group I)
129	129	300 mm sweep	3	EACH
130	130	P & F 1200 mm Sweep BEE 5 Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979, I/p 50 Watt at max speed & 230 Volt, air delivery >210 CMM, Speed > 330 RPM with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. (Group-I)	12	EACH
131	131	P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .	12	EACH
132	132	P & F of IP 65 protected LED Street Light fixture 70-75 Watt (with surge protection device 10KA) applicable for area lighting with extruded pressure die cast aluminum housing, system lumens efficacy of 100 lm/watt minimum, toughened glass with diffuser, suitable lenses on LED, 240V, 50 Hz of High Power LED lamps supplied with prewired cable of 1 mts. Integrated Driver shall be high efficiency having efficiency>85% and in compliance to IEC standards System life of 50,000 Burning Hours, CRI>80, PF>0.90 at full load, CCT 5700-6500 K (as per direction of Engineer in charge). Fixtures shall be CE compliance.(Group I).	2	EACH
133	133	S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.
134	134	32 mm Dia.	2	P.MTR
135	135	P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
136	136	16.0 Sq.mm
137	137	4 core (Armoured)	50	P.MTR
138	138	SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. (Group I)
139	139	0.5 HP, 1-Ø, (6-28)Mtr, (52-12)LPM	1	EACH
140	140	Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity. (Group I)
141	141	6 kg	1	EACH
142	142	2. Construction of Veterinary Hospital (under Nabard RIDF-T-XXVI) at Khatepura Bassi Distt. Jaipur
143	143	Part-A Building Work
144	144	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils.	198	P.cum
145	145	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 ( 1 Cement:4 coarse sand : 8 graded stone aggregate 40 mm nominal size.	54	P.cum
146	146	Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30CM thick wall in Cement Mortar 1:6 ( 1-Cement : 6-Sand).	208	P.Cum
147	147	Brick work with clay flyash F.P.S. brick (IS 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)	72	P.cum
148	148	Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand).	5	P.cum
149	149	Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 75 in superstructure above plinth level upto floor V level in. . Cement mortar 1 : 4 (1 cement : 4 coarse sand).	69	P.Sqm
150	150	Random rubble dry stone Kharanja under floor.	28	P.Cum
151	151	Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix.	10	P.Cum
152	152	Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix/Design Mix	41	P.Cum
153	153	Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft, bases of columns etc.	54	P.Sqm
154	154	Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.	310	P.Sqm
155	155	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code)	4998	P.Kg
156	156	P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm	48	P.sqm
157	157	Providing and laying of paver block as per IS 15658 : 2006 (indian standardf for precast concrete block for paving - specification ) and IRC : SP:63 - 2004 ( guidelines for the use of interlocking concrete block pavement), M-30, 60 mm thic to used in non traffic areas like building premises, monument premises, land scapes, public gardens/ park, domestic drives, paths and patios, Embankment slaopes, sand stabilization area etc. (As per table 1 of IS 15658 : 2006), Category 'B' Dented only two side like I, Z, T shapes etc. as per IRC SP 63:2004.	94	P.Sqm
158	158	Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu/Jalore (Red / Chocolate/Black/Pink Colour) Above 3601 Cm2 Slabs.	4	P.Sqm
159	159	Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite / Kota stone work, Full Edge moulding.	7	P.Rmt
160	160	Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.	634	P.Kg.
161	161	Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%].	26	P.Sqm
162	162	Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.	23	P.Sqm
163	163	Providing and fixing Square bars or other flat welded to window, ventilatiors etc.	233	P.Kg.
164	164	Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).	12	P.Sqm
165	165	Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry : Size 75 x 60mm	30	P.Rmt.
166	166	Providing and fixing in CM 1:4 double paitam (rebated) stone door window and ventilator frames of approved quarry : Size 100 x 75mm.	48	P.Rmt.
167	167	Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' 30 mm thick. Commercial Veneer Both Side.	28	P.Sqm
168	168	Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) For aboy item.	28	P.Sqm
169	169	Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured).	11	P.Sqm
170	170	Providing and fixing 1mm thick M.S. sheet garrage door shutters with frame of 40 x 40 x 6mm. angle iron 3mm M.S. gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer : (Excluding cost of frames) Using M.S. angles 40 x 40 x 6mm for diagonal braces.	2	P.Sqm
171	171	Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. Extra for providing D type pipe head as top of hand railing.	63	P.Kg
172	172	Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).	14	P.Cum
173	173	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design.	66	P.Mtr
174	174	Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick.	451	P.Sqm
175	175	Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :12mm thick.	620	P.Sqm
176	176	6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)	151	P.Sqm
177	177	Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).	76	P.Sqm
178	178	Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).	12	P.Sqm
179	179	Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.	76	P.Sqm
180	180	Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete.	1032	P.Sqm
181	181	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.	620	P.Sqm
182	182	Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).	526	P.Sqm
183	183	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.	185	P.Sqm
184	184	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick For area of each slab from 2001 to 5000 Sq.Cm.	88	P.Sqm
185	185	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Medium shade using approximately 50% white cement and 50% ordinary cement.	59	P.Sqm
186	186	Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification:	11	P.Sqm
187	187	Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design.	52	P.Mtr.
188	188	Making grooves as per design in plaster 10mm to 20mm wide.	240	P.Mtr.
189	189	Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.	478	P.Cum
190	190	Carriage of Earth, Sand, Lime, Morrum, Manure or Sludge including Loading & Unloading upto 2.00 km. Lead	307	P.Cum
191	191	Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering.M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).	5	P.Cum
192	192	Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone minimum 30mm thick.	38	P.sqm
193	193	Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:20 mm	17	P.Rmt
194	194	150cm high fencing with angle iron 50x50x6mm. placed at every 3Mtr. apart 30cm. in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with 50x50x6mm. angle iron provided with 5 horizontal lines and two diagonals of black barbed wire between two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete.	85	P.Rmt
195	195	Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. for Grading III Material	19	P.Cum
196	196	Part-B Sanitary Work
197	197	P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.	1	Each
198	198	P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor	2	Each
199	199	P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : Exposed on wall
200	200	(A) 15 mm dia normail ber B- class	40	P.mtr
201	201	(B) 25 mm Dia B class.	5	P.mtr
202	202	Making connection of G.I. distribution branch with G.I. main including all fitting.Upto 25mm dia.	1	Each
203	203	P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore.	4	Each
204	204	P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:C.P. Brass 15mm nominal bore.	2	Each
205	205	P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity.	2	Each
206	206	Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size :
207	207	15mm dia nominal bore	4	Each
208	208	25mm dia nominal bore	2	Each
209	209	P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt.300 gm,15mm.	2	Each
210	210	P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.
211	211	110 mm dia.	60	P.mtr
212	212	P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:
213	213	(A) Bend 45 dg., 110mm dia	5	Each
214	214	(B) Bend 87.5 dg., 110mm dia	5	Each
215	215	(C) Vent cowel 110 mm dia	2	Each
216	216	(D) Pipe Clip 110 mm	20	Each
217	217	P & F Push Cock superior quality, of approved make C.P. Brass 15 mm.	2	Each
218	218	Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.
219	219	Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame.	3	Each
220	220	Inside size 450 x 450mm depth upto 0.5 M Cement cover with frame	2	Each
221	221	Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring, earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: Size 300 Cm. dia outside & 300 Cm. depth.	1	Each
222	222	Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 200 x100 x130 cm.(for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10 mm dia @ 15 cm C/C bothways including shuttering complete in all respect.	1	Each
223	223	P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm.	3	Each
224	224	P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS : 7231.	3	Each
225	225	P & F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make.For 3 Urinal.	1	Each
226	226	P&F C.P. brass Urinal Spreader for stall urinal of approved make.	3	Each
227	227	P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 580 mm x 450 mm	4	Each
228	228	P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick commercial ply base fixed to wooden screws & washers. Other sizes.	3	Each
229	229	P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia.	5	Each
230	230	P & F jet spray for water closet with C.P. copper Tube flangr of approved make.	2	Each
231	231	P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. Makrana II quality marble having light spots.	2	Each
232	232	P & F water closet Seat Covers with brass hinges complete : (IS : 2548 Marked) Solid PVC (ISI marked) grade-I White for EWC.	2	Each
233	233	P&F Soap dish or tray of approved quality/ make. C.P. brass heavy and superior quality	3	Each
234	234	Part-C Electric Work
235	235	Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box of 20 SWG with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. (Group I)
236	236	Short point (up to 3 mtr.)	15	EACH
237	237	Medium point (up to 6 mtr.)	20	EACH
238	238	Long point (up to 10 mtr..)	10	EACH
239	239	Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. (Group I)
240	240	On board	13	EACH
241	241	S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit with Wire mesh and making good the same as required.
242	242	25 mm (Group I)	150	P.MTR
243	243	Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. (Group I)
244	244	2 x 2.5 sq. mm. + 1x1.5sqmm	85	P.MTR
245	245	2 x 4 sq. mm. + 1x2.5sqmm	120	P.MTR
246	246	P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections with lugs , testing etc. as required.(Group I)
247	247	Four pole Isolator
248	248	63 A rating	1	EACH
249	249	P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. (Group I)	10	EACH
250	250	P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.(Group I)	20	EACH
251	251	P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.(Group I)
252	252	Single pole MCB
253	253	6 A to 32 A rating	12	EACH
254	254	P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.(Group I)
255	255	Double door (Three phase)
256	256	4 Way	1	EACH
257	257	P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required
258	258	5 step fan regulator 2 Module (Group I)	11	EACH
259	259	Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular box of 20 SWG on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(Group I)	17	EACH
260	260	P&F of IP 20 LED tube light 20 Watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light,integral driver,2000 lumen+5% tolerance system kumen efficacy of 100Lm/W minimum expected life time of 25000 burning hours,.CCT 5700K,ANSI,CRI 80,driver efficiency>85%,life expectancy of driver minimum 30000 hrs.P.F 0.95 at full load/230V AC(Group I)	13	EACH
261	261	P & F extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd.	8	P.MTR
262	262	P & F ISI marked single tone electronic call bell including making connection testing etc. as required.(Group II)	1	EACH
263	263	P & F of IP 20 surface/recess mounted LED down light made of pressure die cast aluminum housing, with heat sink and good quality reflector, high efficiency external driver power consumption 14/15 watt, system lumen efficiency>80 lumen/watt. CCT 6000K (minimum) K, CRI>80, PF>0.9 life time 50,000 burning hours. (Group-I)	11	EACH
264	264	Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.
265	265	With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating
266	266	GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip	1	EACH
267	267	S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
268	268	8 SWG G.I. ( Hot Dipped ) Wire	16	P.MTR
269	269	P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.(Group I)
270	270	300 mm sweep	3	EACH
271	271	P & F 1200 mm Sweep BEE 5 Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979, I/p 50 Watt at max speed & 230 Volt, air delivery >210 CMM, Speed > 330 RPM with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. (Group-I)	12	EACH
272	272	P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .	12	EACH
273	273	P & F of IP 65 protected LED Street Light fixture 70-75 Watt (with surge protection device 10KA) applicable for area lighting with extruded pressure die cast aluminum housing, system lumens efficacy of 100 lm/watt minimum, toughened glass with diffuser, suitable lenses on LED, 240V, 50 Hz of High Power LED lamps supplied with prewired cable of 1 mts. Integrated Driver shall be high efficiency having efficiency>85% and in compliance to IEC standards System life of 50,000 Burning Hours, CRI>80, PF>0.90 at full load, CCT 5700-6500 K (as per direction of Engineer in charge). Fixtures shall be CE compliance.(Group I).	2	EACH
274	274	S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.
275	275	32 mm Dia.	2	P.MTR
276	276	P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
277	277	16.0 Sq.mm
278	278	4 core (Armoured)	50	P.MTR
279	279	SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. (Group I)
280	280	0.5 HP, 1-Ø, (6-28)Mtr, (52-12)LPM	1	EACH
281	281	Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity. (Group I)
282	282	6 kg	1	EACH
283	283	3. Const. of Veterinary Sub center at Ballupura (Chaksu) (under RIDF T-26) Distt.- Jaipur
284	284	PART 'A' - BUILDING WORK
285	285	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils.	104	P.Cum
286	286	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1: 4: 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).	28	P.Cum
287	287	Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand).	99	P.cum
288	288	Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix.	8	P.cum
289	289	Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.	162	P.Cum
290	290	Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand)	5.6	P.Cum
291	291	Brick work with clay flyash F.P.S. brick (IS 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)	57	P.Cum
292	292	Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.	39	P.Sqm
293	293	Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.	115	P.Sqm
294	294	Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix.	15.4	P.Cum
295	295	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code).	2222	P.Kg
296	296	Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 75 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 4 (1 cement : 4 coarse sand)	35	P.Sqm
297	297	Grading roof for water proofing treatment with water proffing compound. Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).	4	P.Cum
298	298	Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification :	30	P.Sqm
299	299	Providing gola 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design.	48	P.Rmt
300	300	Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20 mm thick.	464	P.Sqm
301	301	Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 12 mm thick.	276	P.Sqm
302	302	6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)	75	P.Sqm
303	303	Making grooves as per design in plaster 10mm to 20mm wide.	74	P.Rmt
304	304	Making of drip course (Tapka) in CM 1;6 width upto 40 mm & 10 mm thick as per standerd design.	23	P.Rmt
305	305	Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. New plastered surface (Three or more Coats)	552	P.Sqm
306	306	Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).	486	P.Sqm
307	307	Distempering with I st quality acrylic washable distemper ( ready mixed) of approved manufacturer and of required shade and colour complete including all scaffolding as per manufacturer's specification. Two or more coats on new work including preparation of base with primer, putty, lippy etc complete in all respect.	303	P.Sqm
308	308	Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :
309	309	Partly fixed and partly openable [ fixed area not to exceed 33%]	13	P.Sqm
310	310	Windows side hung /Ventilators top or centre hung (openable)	1.1	P.Sqm
311	311	Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.	14	P.Sqm.
312	312	Providing and fixing Square bars or other flat welded to window, ventilatiors etc.	77	P.Kg
313	313	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work	63	P.Sqm
314	314	Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.	560	P.Kg
315	315	Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone minimum 30mm thick.	13	P.Sqm
316	316	Random rubble dry stone Kharanja under floor.	9	P.Cum
317	317	Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering.M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).	6	P.Cum
318	318	Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :30 mm thick .Commercial Veneer both side	12	P.Sqm
319	319	Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13.	12	P.Sqm
320	320	Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).	5	P.Sqm
321	321	Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.For area of each slab from 2001 to 5000 Sqcm	9	P.Sqm
322	322	P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm.	60	P.Sqm
323	323	Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).	19	P.Sqm
324	324	Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).	5	P.Sqm
325	325	Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.	19	P.Sqm
326	326	Providing and fixing in CM 1:4 double paitam (rebated) stone door window and ventilator frames of approved quarry :Size 100 x 75mm.	54	P.Rmt
327	327	Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:20 mm	15	P.Rmt
328	328	Finishing with neat cement (punning).	15	P.Sqm
329	329	Carriage of Earth, Sand, Lime, Morrum, Manure or Sludge including Loading & Unloading upto 2.00 km. Lead	137.3	P.Cum
330	330	Stone slab roofing on ground floor with fine grained stone slab from aproved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1 :4 with ceiling pointing in c.m. 1;3 complete as per specification and instruction of engineer incharge.	6	P.Sqm
331	331	M-35,60mm thick to be used in light traffic (Light traffic is defined as a daily traffic up to 150 commercial vehicles exceeding 30 KN laden weight, or an equivalent up to 0.5 million standard axles (MSA) for a design life of 20 years (A standard axle is defined as a single axle load of 81.6 KN) like pedestrian plazas, shopping complexes ramps, car parks, office driveways , housing colonies, office complexes, rural roads with low volume traffic, farm houses , beach sites, tourist resorts, local authority footways, residential roads, etc Category ‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP 63:2004	40	P.Sqm
332	332	Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. for Grading III Material	19	P.Cum
333	333	PART 'B' - SANITARY WORK
334	334	P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.	1	Each
335	335	P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor.	1	Each
336	336	P & F water closet Seat Covers with brass hinges complete : (IS : 2548 Marked) Solid PVC (ISI marked) grade-I White for EWC.	1	Each
337	337	P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS : 7231	2	Each
338	338	P&F Beveled edge mirror of special glass of appd make (Atul/equivalent) complet with 6mm thick asbestos cemetn sheet ground fixed to wooden scrwes & washers. Size 600 x 450mm x 4mm thick	2	Each
339	339	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)
340	340	(A) 15 mm nominal outer dia pipes	10	P.Mtr.
341	341	(B) 25 mm nominal outer dia pipes	8	P.Mtr.
342	342	P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: size 550mm x 400mm	2	Each
343	343	P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass bib cock,15mm nominal bore.	4	Each
344	344	P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :
345	345	(a) Gun-metal 15mm nominal bore.	1	Each
346	346	(b) Gun-metal 25mm nominal bore.	1	Each
347	347	P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. 500 litre capacity	1	Each
348	348	P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked).	5	Each
349	349	P & F 15 mm. Dia Connection pipe of approved quality/make: PVC pipe with C.P. Brass nuts up to length 600 mm.	4	Each
350	350	P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.Not less than 300 gm,15mm.	1	Each
351	351	P&F towel rail or ring of approved quality /make: C.P. brass towel rail with bracket 600 x20mm.	2	Each
352	352	P&F Jet spray for water closet with C.P. copper tube flange of approved make	1	Each
353	353	P&F Grating of approved quality/ make. Stainless Steel Sheet size 125 mm dia heavy Quality of Approved Make.	4	Each
354	354	P&F Soap dish or tray of approved quality/ make. C.P. brass heavy and superior quality	2	Each
355	355	Providing and Fixing Unplasticized Poly Vinyl Chloride [UPVC] SWR Pipes for Sciland waste discharge system [IS: 13592 : 1992 Marked] of approved quality/ make.
356	356	(a) 110mm dia	24	P.Mtr.
357	357	Providing and Fixing Unplasticized Poly Vinyl Chloride [UPVC] SWR Pipes for Sciland waste discharge system [IS: 13592 : 1992 Marked] of approved quality/ make.
358	358	(A) Bend 87.5 dg., 110mm dia	8	Each
359	359	(C) Vent cowel 110 mm dia	1	Each
360	360	(F) Pipe Clip 110 mm	6	Each
361	361	Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 10mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 450x450mm depth upto 0.5m Cement cover with frame.	2	Each
362	362	Making connection of G.I. distribution branch with G.I. main including all fitting. Up to 25 mm dia.	1	Each
363	363	P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete.Flat Back (large) or half stall size 610x400x380 mm.	1	Each
364	364	P & F C.P. brass Urinal Spreader for stall urinal of approved make.	1	Each
365	365	Construction of Cement Concrete Chamber 125 mm dia on depresed floor upto 45 Cm height from floor with :C.P. Brass grating	4	Each
366	366	Hoisting Charges for each floor :	1	Each
367	367	Construction of Recharge Shaft in filter pit including Earth work Excavation , lifting excavted earth with all lift and 50m lead and centering & shuttering evenever required.Diameter 900 mm	10	P.Rmt.
368	368	Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of M20 mix with 40 mm thickness. Diameter 900 mm	10	P.Rmt.
369	369	Construction of septic tank in all types of soil with 40cm thick masonry in CM 1:6 15cm thick CC bed of 1:5:10 M-15 grade CC flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3, Ralthal, Kharanja, 50mm thick stone partiton walls, 20mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos C.I. foot rests of approved design, two No. 450mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing incl. disposal of surplus earth wtihin a lead of 50mtr.Size 200x100x130cm (for 10users)	1	Each
370	370	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work).15 mm nominal outer dia pipes	30	P.Rmt.
371	371	Providing & fixing C.P.flange for 15mm dia taps.	5	Each
372	372	Supplying and fixing C.I. Cover with frame, C.I. gratings for chambers & man holes.	25	P.Kg.
373	373	PART 'C' - ELECTRIC WORK
374	374	Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. (GROUP II)
375	375	Short point (up to 3 mtr.)	12	Each
376	376	Medium point (up to 6 mtr.)	10	Each
377	377	Long point (up to 10 mtr..)	6	Each
378	378	Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. (GROUP II)
379	379	On board	8	Each
380	380	S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. (GROUP II)
381	381	25 mm	75	P. mtr
382	382	Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. (GROUP II)
383	383	2 x 2.5 sq. mm. + 1x1.5sqmm	60	P. mtr
384	384	2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.	60	P. mtr
385	385	Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(GROUP II)	7	Each
386	386	P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. (GROUP I)
387	387	Single pole MCB
388	388	6 A to 32 A rating	10	Each
389	389	P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. (GROUP I)
390	390	Double pole Isolator
391	391	30 A / 40 A rating	1	Each
392	392	P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. (GROUP I)
393	393	Double door (Single phase)
394	394	12 Way	1	Each
395	395	P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. (Group II)	8	Each
396	396	P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.(Group II)	7	Each
397	397	P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required (Group II)
398	398	5 step fan regulator 2 Module	6	Each
399	399	P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
400	400	10.0 Sq.mm (Group II)
401	401	2 core	50	P. mtr
402	402	Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.
403	403	With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating
404	404	GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip	1	Each
405	405	S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
406	406	8 SWG G.I. ( Hot Dipped ) Wire	10	P. mtr
407	407	S & Laying following size' B ' class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required
408	408	40 mm dia.	6	P. mtr
409	409	P & F 1200 mm Sweep BEE 5 Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979, I/p 50 Watt at max speed & 230 Volt, air delivery >210 CMM, Speed > 330 RPM with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. (Group-I)	6	Each
410	410	P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .	6	Each
411	411	P&F of IP 20 LED tube light 20 Watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light,integral driver,2000 lumen+5% tolerance system kumen efficacy of 100Lm/W minimum expected life time of 25000 burning hours,.CCT 5700K,ANSI,CRI 80,driver efficiency>85%,life expectancy of driver minimum 30000 hrs.P.F 0.95 at full load/230V AC(Group-I)	8	Each
412	412	P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required.	1	Each
413	413	P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.(Group I)
414	414	300 mm sweep	1	Each
415	415	P & F extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd.	5	P. mtr
416	416	SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. (Group I)
417	417	0.5 HP, 1-Ø, (6-28)Mtr, (52-12)LPM	1	EACH
418	418	Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity. (Group I)
419	419	6 kg	1	EACH
420	420	4. Const. of Veterinary Sub center at Chandma Kalan (Chaksu) (under RIDF T-26) Distt.- Jaipur
421	421	PART 'A' - BUILDING WORK
422	422	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils.	104	P.Cum
423	423	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1: 4: 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).	28	P.Cum
424	424	Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand).	99	P.cum
425	425	Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix.	8	P.cum
426	426	Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.	162	P.Cum
427	427	Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand)	5.6	P.Cum
428	428	Brick work with clay flyash F.P.S. brick (IS 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)	57	P.Cum
429	429	Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.	39	P.Sqm
430	430	Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.	115	P.Sqm
431	431	Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix.	15.4	P.Cum
432	432	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code).	2222	P.Kg
433	433	Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 75 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 4 (1 cement : 4 coarse sand)	35	P.Sqm
434	434	Grading roof for water proofing treatment with water proffing compound. Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).	4	P.Cum
435	435	Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification :	30	P.Sqm
436	436	Providing gola 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design.	48	P.Rmt
437	437	Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20 mm thick.	464	P.Sqm
438	438	Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 12 mm thick.	276	P.Sqm
439	439	6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)	75	P.Sqm
440	440	Making grooves as per design in plaster 10mm to 20mm wide.	74	P.Rmt
441	441	Making of drip course (Tapka) in CM 1;6 width upto 40 mm & 10 mm thick as per standerd design.	23	P.Rmt
442	442	Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. New plastered surface (Three or more Coats)	552	P.Sqm
443	443	Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).	486	P.Sqm
444	444	Distempering with I st quality acrylic washable distemper ( ready mixed) of approved manufacturer and of required shade and colour complete including all scaffolding as per manufacturer's specification. Two or more coats on new work including preparation of base with primer, putty, lippy etc complete in all respect.	303	P.Sqm
445	445	Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :
446	446	Partly fixed and partly openable [ fixed area not to exceed 33%]	13	P.Sqm
447	447	Windows side hung /Ventilators top or centre hung (openable)	1.1	P.Sqm
448	448	Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.	14	P.Sqm.
449	449	Providing and fixing Square bars or other flat welded to window, ventilatiors etc.	77	P.Kg
450	450	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work	63	P.Sqm
451	451	Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.	560	P.Kg
452	452	Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone minimum 30mm thick.	13	P.Sqm
453	453	Random rubble dry stone Kharanja under floor.	9	P.Cum
454	454	Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering.M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).	6	P.Cum
455	455	Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :30 mm thick .Commercial Veneer both side	12	P.Sqm
456	456	Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13.	12	P.Sqm
457	457	Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).	5	P.Sqm
458	458	Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.For area of each slab from 2001 to 5000 Sqcm	9	P.Sqm
459	459	P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm.	60	P.Sqm
460	460	Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).	19	P.Sqm
461	461	Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).	5	P.Sqm
462	462	Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.	19	P.Sqm
463	463	Providing and fixing in CM 1:4 double paitam (rebated) stone door window and ventilator frames of approved quarry :Size 100 x 75mm.	54	P.Rmt
464	464	Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:20 mm	15	P.Rmt
465	465	Finishing with neat cement (punning).	15	P.Sqm
466	466	Carriage of Earth, Sand, Lime, Morrum, Manure or Sludge including Loading & Unloading upto 2.00 km. Lead	137.3	P.Cum
467	467	Stone slab roofing on ground floor with fine grained stone slab from aproved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1 :4 with ceiling pointing in c.m. 1;3 complete as per specification and instruction of engineer incharge.	6	P.Sqm
468	468	M-35,60mm thick to be used in light traffic (Light traffic is defined as a daily traffic up to 150 commercial vehicles exceeding 30 KN laden weight, or an equivalent up to 0.5 million standard axles (MSA) for a design life of 20 years (A standard axle is defined as a single axle load of 81.6 KN) like pedestrian plazas, shopping complexes ramps, car parks, office driveways , housing colonies, office complexes, rural roads with low volume traffic, farm houses , beach sites, tourist resorts, local authority footways, residential roads, etc Category ‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP 63:2004	40	P.Sqm
469	469	Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. for Grading III Material	19	P.Cum
470	470	PART 'B' - SANITARY WORK
471	471	P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.	1	Each
472	472	P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor.	1	Each
473	473	P & F water closet Seat Covers with brass hinges complete : (IS : 2548 Marked) Solid PVC (ISI marked) grade-I White for EWC.	1	Each
474	474	P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS : 7231	2	Each
475	475	P&F Beveled edge mirror of special glass of appd make (Atul/equivalent) complet with 6mm thick asbestos cemetn sheet ground fixed to wooden scrwes & washers. Size 600 x 450mm x 4mm thick	2	Each
476	476	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)
477	477	(A) 15 mm nominal outer dia pipes	10	P.Mtr.
478	478	(B) 25 mm nominal outer dia pipes	8	P.Mtr.
479	479	P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: size 550mm x 400mm	2	Each
480	480	P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass bib cock,15mm nominal bore.	4	Each
481	481	P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :
482	482	(a) Gun-metal 15mm nominal bore.	1	Each
483	483	(b) Gun-metal 25mm nominal bore.	1	Each
484	484	P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. 500 litre capacity	1	Each
485	485	P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked).	5	Each
486	486	P & F 15 mm. Dia Connection pipe of approved quality/make: PVC pipe with C.P. Brass nuts up to length 600 mm.	4	Each
487	487	P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.Not less than 300 gm,15mm.	1	Each
488	488	P&F towel rail or ring of approved quality /make: C.P. brass towel rail with bracket 600 x20mm.	2	Each
489	489	P&F Jet spray for water closet with C.P. copper tube flange of approved make	1	Each
490	490	P&F Grating of approved quality/ make. Stainless Steel Sheet size 125 mm dia heavy Quality of Approved Make.	4	Each
491	491	P&F Soap dish or tray of approved quality/ make. C.P. brass heavy and superior quality	2	Each
492	492	Providing and Fixing Unplasticized Poly Vinyl Chloride [UPVC] SWR Pipes for Sciland waste discharge system [IS: 13592 : 1992 Marked] of approved quality/ make.
493	493	(a) 110mm dia	24	P.Mtr.
494	494	Providing and Fixing Unplasticized Poly Vinyl Chloride [UPVC] SWR Pipes for Sciland waste discharge system [IS: 13592 : 1992 Marked] of approved quality/ make.
495	495	(A) Bend 87.5 dg., 110mm dia	8	Each
496	496	(C) Vent cowel 110 mm dia	1	Each
497	497	(F) Pipe Clip 110 mm	6	Each
498	498	Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 10mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 450x450mm depth upto 0.5m Cement cover with frame.	2	Each
499	499	Making connection of G.I. distribution branch with G.I. main including all fitting. Up to 25 mm dia.	1	Each
500	500	P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete.Flat Back (large) or half stall size 610x400x380 mm.	1	Each

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Rajasthan Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Various Veterinary Hospital/Sub-Center In Assembly Bassi And Chaksu Package-03/2021-22 ( Ridf-T-26 ), Bassi, Chaksu-Rajasthan

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Various Veterinary Hospital/Sub-Center In Assembly Bassi And Chaksu Package-03/2021-22 ( Ridf-T-26 ), Bassi, Chaksu-Rajasthan

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us