Jharia Rehabilitation And Development Authority has published Construction Of Primary School And High School At Belgaria Jrda Dhanbad. Submission Date for this Tender is 10-07-2021. Building Work Tenders in Belgaria Visthapit Colony Jharkhand. Bidders can get complete Tender details and download the document.
Name of Work: Construction of Primary School and High School at Belgaria Township, JRDA, Dhanbad. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation of foundation trenches in hard soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance upto 50 meter including all lifts with levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design and as per building specification and direction of E.I . | BI01010001010000000000000515BI0100001115 | 978.78 | Cum |
2 | 2 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) | BI01010001010000000000000515BI0100001116 | 180.33 | Cum |
3 | 3 | Providing P.C.C. M-75 with nominal mix of (1:4:8) in foundation and plinth with approved quality of stone metal grade III (50 mm to 25 mm) and clean coarse sand of F.M 2.5 to 3 including screening , centering, shuttering, mixing cement concrete in cement mixer and placing in position, vibratingm stricking, curing, tax and royalty all complete job as per building specification and direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001117 | 249.5 | Cum |
4 | 4 | Providing R.C.C. M 150 with nominal mix of (1:2:4) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in cement mixer and placing in position, vibrating, striking, curing, tax and royalty all complete job (but excluding the cost of reinforcement) as per building specification and direction of Engineer Incharge. | BI01010001010000000000000515BI0100001118 | 183.89 | Cum |
5 | 5 | Providing RCC M150 with nominal mix of (1:2:4) in band at plinth level with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering and centering, mixing cement conctrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of renforcement), taxes and royalty all complete job as per building specification and direction of E/I | BI01010001010000000000000515BI0100001119 | 71.32 | Cum |
6 | 6 | Providing designation 100A brick work with fly ash lime brick (FLAG) confitming to IS 12894-1990 (9" X 4.5" X 3") in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10 mm, thick mortar joints, cost of screening materials raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I | BI01010001010000000000000515BI0100001120 | 181.09 | Cum |
7 | 7 | Filling in foundation trenches and plinth in layers not exceeding 150mm th well watered,rammed,fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/I | BI01010001010000000000000515BI0100001121 | 971.25 | Cum |
8 | 8 | Providing RCC M-150 with nominal mix of (1:2:4) in column with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering and centering, mixing cement conctrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of renforcement), taxes and royalty all complete job as per building specification and direction of E/I | BI01010001010000000000000515BI0100001122 | 75.14 | Cum |
9 | 9 | Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" X 4.5" X 3") in C.M. (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10 mm, thick mortar joints, cost of screening materials raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I | BI01010001010000000000000515BI0100001123 | 784.28 | Cum |
10 | 10 | Providing designation 112 mm thick reinforced designation 100 A brick work with fly ash lime brick (FLAG) confitming to IS 12894-1990 (9" X 4.5" X 3") in C.M. (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including the cost of screening carriage of materials scaffolding,raking out joints to 15 mm depth, curing, taxes and royalty( but excluding the cost of reinforcement) all complete as per building specification and direction of E/I | BI01010001010000000000000515BI0100001124 | 126.49 | sqm |
11 | 11 | Providing RCC M-150 with nominal mix of (1:2:4) in lintel with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering and centering, mixing cement conctrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of renforcement), taxes and royalty all complete job as per building specification and direction of E/I | BI01010001010000000000000515BI0100001125 | 34.27 | Cum |
12 | 12 | Providing RCC M150 with nominal mix of (1:2:4) in beam of all types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete job as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001126 | 65.34 | Cum |
13 | 13 | Providing RCC M150 with nominal mix of (1:2:4) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete job as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001127 | 308.22 | Cum |
14 | 14 | Providing and laying double charge vitrified floor tiles in different sizes(thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colour and shades laid on 20mm th cement mortar 1:4(1cement:4coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigmentetc, complete size of tiles 600x600mm | BI01010001010000000000000515BI0100001128 | 1955.21 | sqm |
15 | 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001129 | 369.74 | sqm |
16 | 16 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete | BI01010001010000000000000515BI0100001130 | 169.54 | sqm |
17 | 17 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick | BI01010001010000000000000515BI0100001131 | 161.71 | sqm |
18 | 18 | Providing 25 mm th 2 nd class patent sdtone flooring(1:2:4) with 12mm to 6mm size graded stone chips and top layers 6 mm th (1:3) with 6 mm down stone chips in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone,taxes and royality all complete job as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001132 | 160.7 | sqm |
19 | 19 | Providing and fixing fan hook of 16 mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in RCC slab/beam at the time of casting all complete as per building specification and direction of E/I (where material is not supplied by deptt.) | BI01010001010000000000000515BI0100001133 | 195 | each |
20 | 20 | Providing av 63 mm thick RCC M-150 with nominal mix of (1:2:4) chajja with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,6mm cement plaster(1:4) in celling and sides of chajja with sand curing (but excluding the cost of reinforcement), taxes and royalty all complete job as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001134 | 224.05 | sqm |
21 | 21 | Providing 75 mm th precast R.C.C. M 150 with nominal mix of (1:2:4)slab of desired size with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in cement mixer and placing in position, vibrating, striking, curing, tax and royalty all complete job (but excluding the cost of reinforcement) as per building specification and direction of Engineer Incharge. | BI01010001010000000000000515BI0100001135 | 5.97 | Cum |
22 | 22 | Providing 50 mm thick precast RCC M-150 with nominal mix of (1:2:4) jali with approved quality of stone chips 12mm and down well graded and clean coarse sand of F.M. 2.5 to 3 with 1.6 mm thick MS wire as per approved drawing and design and placing the same in position true to plumb and level with 6mm dia MS rod placed at regular intervals both horizontally and vertically as required and properly grouted with cm (1:3) including cost of curing scaffolding and finishing,all complete job as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001136 | 35.31 | sqm |
23 | 23 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level | BI01010001010000000000000515BI0100001137 | 73218.2 | Kg |
24 | 24 | Providing 12mm cement plaster (1:6) with clean coarse sand of FM 1.5 including screening ,curing with all leads and lifts of water scaffolding taxes and royality all complete job as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001138 | 7607.02 | sqm |
25 | 25 | Providing 6mm th cement plaster (1:4) in ceiling with clean coarse sand of FM 1.5 including screening ,curing with all leads and lifts of water scaffolding taxes and royality all complete job as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001139 | 2295.98 | sqm |
26 | 26 | Providing 1.5mm cement punning including curing,carriage of water with all leads and lifts complete job as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001140 | 239.26 | sqm |
27 | 27 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | BI01010001010000000000000515BI0100001141 | 9657.54 | Kg |
28 | 28 | Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. | BI01010001010000000000000515BI0100001142 | 5.57 | sqm |
29 | 29 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge. | BI01010001010000000000000515BI0100001143 | 10.98 | Cum |
30 | 30 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge. | BI01010001010000000000000515BI0100001144 | 130.75 | Cum |
31 | 31 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.30 mm thick plain PVC door shutters | BI01010001010000000000000515BI0100001145 | 42.28 | Cum |
32 | 32 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumica stone or fine sand paper applying putty wherever required scaffoldind washing of floors and taxes all complete job as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001146 | 4228.48 | sqm |
33 | 33 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | BI01010001010000000000000515BI0100001147 | 876.78 | sqm |
34 | 34 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper,scaffolding,curing and taxes all complete job as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001148 | 4113.03 | sqm |
35 | 35 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | BI01010001010000000000000515BI0100001149 | 302.71 | Cum |
36 | 36 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | BI01010001010000000000000515BI0100001150 | 56.19 | Cum |
37 | 37 | Providing two coats of synthetic enamel paint of approved shade and make over new steel surface including cleaning the surface after removing dirt scales,smokes grease and sand preparing including cost of scaffolding and taxes all complete job as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001151 | 850.093 | Cum |
38 | 38 | Lettering with black Japan paint of approved brand and manufacture | BI01010001010000000000000515BI0100001152 | 5000 | CM |
39 | 39 | Supplying,fitting,and fixing 30 mmth solid core type non decorative single leaf flush shutter in doors and windows with black board blended with high quality phenol formal dehydesynthetic resin both side commercial veneered of standard make with oxidised iron fitting such as hinges tower bolts handle cleats and sand blocks and taxes all complete as per building specification and direciton of E/I | BI01010001010000000000000515BI0100001153 | 105.72 | sqm |
40 | 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001154 | 8 | Nos. |
41 | 41 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001155 | 12 | Nos. |
42 | 42 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : | BI01010001010000000000000515BI0100001156 | 12 | Nos. |
43 | 43 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size\n550x400 mm with single 15 mm PTMT pillar cock. | BI01010001010000000000000515BI0100001157 | 12 | each |
44 | 44 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm | BI01010001010000000000000515BI0100001158 | 2 | each |
45 | 45 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete | BI01010001010000000000000515BI0100001159 | 12 | each |
46 | 46 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | BI01010001010000000000000515BI0100001160 | 12 | each |
47 | 47 | Sand cast iron S&S pipe as per IS: 1729 100 mm dia | BI01010001010000000000000515BI0100001161 | 5 | meter |
48 | 48 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | BI01010001010000000000000515BI0100001162 | 10 | each |
49 | 49 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms. | BI01010001010000000000000515BI0100001163 | 16 | each |
50 | 50 | Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms | BI01010001010000000000000515BI0100001164 | 16 | each |
51 | 51 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : metre 447.60 : 15 mm dia nominal bore | BI01010001010000000000000515BI0100001165 | 60 | meter |
52 | 52 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : metre 447.60 :20 mm dia nominal bore | BI01010001010000000000000515BI0100001166 | 80 | meter |
53 | 53 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall 25 mm dia nominal bore | BI01010001010000000000000515BI0100001167 | 300 | meter |
54 | 54 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall 32 mm dia nominal bore | BI01010001010000000000000515BI0100001168 | 120 | meter |
55 | 55 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 50 mm dia nominal bore | BI01010001010000000000000515BI0100001169 | 100 | meter |
56 | 56 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore | BI01010001010000000000000515BI0100001170 | 2 | each |
57 | 57 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore | BI01010001010000000000000515BI0100001171 | 15 | meter |
58 | 58 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore | BI01010001010000000000000515BI0100001172 | 3 | meter |
59 | 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001173 | 10000 | liter |
60 | 60 | Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms | BI01010001010000000000000515BI0100001174 | 35 | each |
61 | 61 | Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms each | BI01010001010000000000000515BI0100001175 | 20 | each |
62 | 62 | Providing and fixing terminal guard :100 mm Sand cast iron S&S as per IS - 1729 | BI01010001010000000000000515BI0100001176 | 4 | each |
63 | 63 | Single tee with door 110x110x110 mm | BI01010001010000000000000515BI0100001177 | 40 | each |
64 | 64 | 110 mm Bend | BI01010001010000000000000515BI0100001178 | 40 | each |
65 | 65 | Providing and fixing terminal guard :100 mm Sand cast iron S&S as per IS - 1729 | BI01010001010000000000000515BI0100001179 | 8 | each |
66 | 66 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore | BI01010001010000000000000515BI0100001180 | 14 | each |
67 | 67 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe | BI01010001010000000000000515BI0100001181 | 200 | meter |
68 | 68 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001182 | 22 | each |
69 | 69 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. | BI01010001010000000000000515BI0100001183 | 2 | each |
70 | 70 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001184 | 111.44 | sqm |
71 | 71 | Providing RCC M-150with nominal mix of (1:2:4) in band at lintel level with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering and centering, mixing cement conctrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of renforcement), taxes and royalty all complete job as per building specification and direction of E/I | BI01010001010000000000000515BI0100001185 | 16.144 | Cum |
72 | 72 | Carriage of Material : Cement Lead 10 km | BI01010001010000000000000515BI0100001186 | 287.69 | Cum |
73 | 73 | Carriage of Material : Sand Lead 35 km | BI01010001010000000000000515BI0100001187 | 1078.18 | Cum |
74 | 74 | Carriage of Material : Chips Lead 8 km | BI01010001010000000000000515BI0100001188 | 879.11 | Cum |
75 | 75 | Carriage of Material : Agg Metal lead 8 km | BI01010001010000000000000515BI0100001189 | 222.58 | Cum |
76 | 76 | Carriage of Material : Bricks Lead 8 km | BI01010001010000000000000515BI0100001190 | 353.92 | Cum |
77 | 77 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc as required. | BI01010001010000000000000515BI0100001191 | 588 | point |
78 | 78 | Supplying & fixing 5/6 amps piano type switch on the existing switch box/cover including connections etc. as required. | BI01010001010000000000000515BI0100001192 | 84 | nos |
79 | 79 | Supplying & fixing piano type 3 pin 5/6 amps socket outlet on the existing switch box/cover including connections etc. as required. | BI01010001010000000000000515BI0100001193 | 84 | nos |
80 | 80 | Supplying & fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.a) 75mm x 75mm x 50mm mm deep | BI01010001010000000000000515BI0100001194 | 21 | nos |
81 | 81 | Supplying & fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.b) 121mm x 121mm x 48 mm deep | BI01010001010000000000000515BI0100001195 | 42 | nos |
82 | 82 | Supplying & fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.c) 72mm x 72 mm x 48 mm deep | BI01010001010000000000000515BI0100001196 | 18 | nos |
83 | 83 | Supplying and Fixing metal box of Suitable size on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 and 15/16amps socket outlet and 15/16 amps piano type switch connection, painting etc as required. | BI01010001010000000000000515BI0100001197 | 42 | nos |
84 | 84 | Wiring for circuit/submain wiring alongwith earth wire with the 2 x 2.5 sq mm + 1x 2.5 sq mm earthwire of PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required. | BI01010001010000000000000515BI0100001198 | 1080 | mtr |
85 | 85 | Wiring for circuit/submain wiring alongwith earth wire with the 2 x 4.0 sq mm + 1x 4.0 sq mm earthwire of PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required. | BI01010001010000000000000515BI0100001199 | 480 | mtr |
86 | 86 | Wiring for circuit/submain wiring alongwith earth wire with the 2 x 6.0 sq mm + 1x 6.0 sq mm earthwire of PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required. | BI01010001010000000000000515BI0100001200 | 240 | mtr |
87 | 87 | Supplying & Drawing 2 x 2.5 sq. mm, sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. | BI01010001010000000000000515BI0100001201 | 360 | mtr |
88 | 88 | Supplying and Fixing 6 way (4 + 18), single door, horizontal type three pole and neutral, sheet steel, MCB distrubution board, 415 volts on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, dinbar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | BI01010001010000000000000515BI0100001202 | 9 | nos |
89 | 89 | Supplying and fixing 6 amps to 32 amps rating, 240 volt 'C' series MCB suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc, as required. | BI01010001010000000000000515BI0100001203 | 84 | nos |
90 | 90 | Supplying and fixing 40 amps rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. | BI01010001010000000000000515BI0100001204 | 42 | nos |
91 | 91 | Supplying & Fixing 2 pin 5 amp ceiling rose on the existing Junction box / wooden block including connection etc as required. | BI01010001010000000000000515BI0100001205 | 234 | nos |
92 | 92 | Supplying & Fixing brass batten/angle holder including connection etc. as required. | BI01010001010000000000000515BI0100001206 | 354 | pcs |
93 | 93 | Providing & fixing M.V. danger notice plate of 200 mm x 150 mm made of mild steel, at least 2 mm thick and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required. | BI01010001010000000000000515BI0100001207 | 6 | nos |
94 | 94 | Earthing with G.I earth pipe 4.5 mtr long, 40 mm dia including accesaories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) as required. | BI01010001010000000000000515BI0100001208 | 6 | set |
95 | 95 | Supplying & laying 25 x 6 mm G.I. strip at 0.500 mtr below ground as strip earth electrode, including soldering etc as required. | BI01010001010000000000000515BI0100001209 | 45 | mtr |
96 | 96 | 100 Amp 415 V Heavey duty three phase with neutral bus bar | BI01010001010000000000000515BI0100001210 | 6 | nos |
97 | 97 | Supply of 85 sqm 3.5 core heavy duty armored aluminium cable | BI01010001010000000000000515BI0100001211 | 50 | mtr |
98 | 98 | Laying of MV cable upto 400 sq. mm | BI01010001010000000000000515BI0100001212 | 50 | mtr |
99 | 99 | Supply of 70 sqm 3.5 core heavy duty armored aluminium cable | BI01010001010000000000000515BI0100001213 | 50 | mtr |
100 | 100 | Laying of MV cable upto 120 sq. mm | BI01010001010000000000000515BI0100001214 | 50 | mtr |
101 | 101 | P/F following rating and breaking capacity of MCCB in existing cubical Panel Board 100 amp 10 KA fixed thermal setting | BI01010001010000000000000515BI0100001215 | 3 | nos |
102 | 102 | P/F following rating and breaking capacity of MCCB in existing cubical Panel Board 200 amp 35 KA fixed thermal setting | BI01010001010000000000000515BI0100001216 | 3 | nos |
103 | 103 | P/F following capacity TPN sheet metal switch disconnector fuge unit in existing metal box with ISI mark hrc fuse including drilling connection etc. 100 amp tpn forway | BI01010001010000000000000515BI0100001217 | 12 | nos |
104 | 104 | GST | 2.57792e+07 | % | |
105 | 105 | LABOUR CESS | 2.88727e+07 | % |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail