| 1 | 1 | Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (ii) 110 mm diameter (HSR 9.57.2) | | 10 | mtr |
|---|
| 2 | 2 | (iii) 150 mm diameter (HSR 9.57.3) | | 5 | mtr |
|---|
| 3 | 3 | Providing and laying of conglomerate floor 50mm thick cement concrete topping 1 :2:4 (HSR 10.7) | | 20 | sqm |
|---|
| 4 | 4 | Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1 :4 (1 cement: 4 coarse sand). Light shade pigment using white cement (HSR 10.30.1) | | 8 | sqm |
|---|
| 5 | 5 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.58) | | 10 | sqm |
|---|
| 6 | 6 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (HSR 10.63.2) | | 10 | sqm |
|---|
| 7 | 7 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 :3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. (ii) Size of Tile 600x600 mm (HSR 10.67.2) | | 10 | sqm |
|---|
| 8 | 8 | 12 mm cement plaster of mix : 1 :6 (1 cement: 6 coarse sand) (HSR 11.8.2) | | 150 | sqm |
|---|
| 9 | 9 | 15 mm cement plaster on rough side of single or half brick wall of mix: (ii) :6 (1 cement: 6 coarse sand) (HSR 11.9.2) | | 150 | sqm |
|---|
| 10 | 10 | Pointing on brick work or brick flooring with cement mortar 1 :3 (1 cement : 3 fine sand): (i) Flush / Ruled/ Struck or weathered pointing (HSR 11.25.1) | | 150 | sqm |
|---|
| 11 | 11 | Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete. (HSR 11.58) | | 200 | sqm |
|---|
| 12 | 12 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately}(ii) Kiln seasoned and chemically treated Hollock wood (ii) 30 mm thick shutters (HSR 12.7.2.2) | | 7 | sqm |
|---|
| 13 | 13 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: (i) with ISi marked M.S. pressed butt hinges bright (ii) Kiln seasoned and chemically treated Hollock wood (HSR 12.19.2.1.2) | | 8 | sqm |
|---|
| 14 | 14 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (ii) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (HSR 13.29.2) | | 40 | Kg. |
|---|
| 15 | 15 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (HSR 30.22) | | 150 | sqm |
|---|
| 16 | 16 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: (i) One or more coats on old work (HSR 30.27.1) | | 100 | sqm |
|---|
| 17 | 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (i) One or more coats on old work (HSR 30.28.1) | | 100 | sqm |
|---|
| 18 | 18 | Finishing walls with Acrylic Smooth exterior paint of required shade: (i) Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface (HSR 30.37.1) | | 100 | sqm |
|---|
| 19 | 19 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (iv) White vitreous chinaware Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (HSR 22.1.4) | | 2 | Nos. |
|---|
| 20 | 20 | Providing and fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinaware cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (HSR 22.34) | | 1 | Nos. |
|---|
| 21 | 21 | Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (i) W.C. pan with ISi marked white solid plastic seat and lid (HSR 22.23.1) | | 2 | Nos. |
|---|
| 22 | 22 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:- 15 mm nominal bore (HSR 22.104)\n | | 2 | Nos. |
|---|
| 23 | 23 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore (HSR 22.106) | | 2 | Nos. |
|---|
| 24 | 24 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (i) 15 mm nominal bore (HSR 22.107) | | 2 | Nos. |
|---|
| 25 | 25 | Regarding terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1 :3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. (HSR 30.9) | | 85 | sqm |
|---|
| 26 | 26 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (HSR 22.181) 1000 Ltr. | | 1000 | Ltr. |
|---|
| 27 | 27 | Providing & fixing 2mm thick PVC Sheet for fiber shed with complete fitting from cover of angle, nut, bolts, paints, pipe etc. complete in all respect to the entire satisfaction of Engineer-in-Charge. ( N.S) | | 5 | sqm |
|---|
| 28 | 28 | Providing and fixing of PVC wall panelling with necessary screw complete in all respect ( N.S) | | 45 | sft. |
|---|
