Providing And Fixing Aluminium Partitions And False Ceiling For Equipments Of Armour Unit , Imt Rohtak

Tender Notice

Providing And Fixing Aluminium Partitions And False Ceiling For Equipments Of Armour Unit , Imt Rohtak

Tender Details

Providing And Fixing Aluminium Partitions And False Ceiling For Equipments Of Armour Unit , Imt Rohtak

Key Value

Document Fees
Refer document
Refer document
Tender Value
Refer document

BOQ Items

Sl. No. Item Description Item Code / Make Quantity Units
1 1 Providing and fixing in position 2mm thk powder coated aluminum partitions of approved colour using Aluminum section frame with top and bottom panels with 12mm thick novapan boards and middle panel with fixed 5 mm thick plain float glass 1st quality with necessary PVC rubber beading including cost and conveyance of all materials, labour charges for making, erecting in position etc., . gaps between wall and Al frame shall be closed with white cement, where ever required complete. The cost includes locking arrangement (7 lever mortice lock) along with three set of keys for each locking arrangement, including door closer, handles, tower bolts, door stopper and neoprene gasket complete etc with standard sections. The partitions shall be made dust proof from outside environment to inside partitions without any gaps. Brands: Jindal / Maan / Hindalco. item1 1020 Sq.m
2 2 Providing and fixing of 2mm thick aluminum powder coated door (Sliding / Single/Double leaf Doors) with half novapan 12mm thick and 5mm clear glass with locking arrangement along with three keys including door closer, handles, tower bolts, stopper & neoprene gasket complete etc. with standard sections. The cost includes closing gaps between wall & aluminum section with white cement or Aluminum angles as required at site (if any) as per the direction of Engineer-In-Charge. Brands: Jindal / Maan / Hindalco. item2 65.4 Sq.m
3 3 Providing and fixing False Ceiling with Gypsum Board 12mm thick in ceiling fixed with Anodised aluminium frame work with Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs / Al. Partitions by means of ceiling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. The cost includes two coats of luppum, one coat primer paint, two coats of OBD including tools, tackles etc at all levels (approximately upto height of +5m from Floor level) as per directions of E-I-C. Brand: India Gypsum/ Gyproc / Armstrong item3 450 Sq.m
4 4 Supply & Fixing of 2mm thick PVC vinyl sheet to be laid and fixed on floor uniformly using full length sheets. Mottled finish inclusive of adhesive, proper surface preparation and proper jointing at the edges of PVC Sheet with neatly jointed finish complete. The cost also includes cost of leveling undulated floor with cement plastering etc. Brands : Wonder floor/Royal House/Responsive. item4 611.6 Sq.m
5 5 Supply & fixing of structural steel fabrication, erection, welding for MS Plates, Inserts, angles, Caps, bases, splices etc built from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, kerb angles, channels and beams etc at all levels as per drawing or as directed by Engineer-in-charge. The cost includes one coat red oxide and two coats of painting, welding, fabricating, fixing, erection complete including the cost of gas cutting equipment with gas cylinders, welding machines, welding rods, all tools & tackles required for the work is in the scope of contractor. Brands: Jindal/TATA/VSP/SAIL or any other brand approved by Engineer in charge. item5 4235 Kgs
6 6 Providing & fixing 10mm anchor bolts 6" length including making the drill holes, fixing & tightening the anchor bolts and fill the gap with suitable chemical solution as per the requirement at site. item6 200 Each
7 7 Providing & fixing of 6mm thick poly carbonate light sheeting (Size, shape & pitch of corrugation as approved by Engineer-in-charge). Sheet should be supplied in size of 3m x 1m or as directed by E-I-C. The sheet shall be fixed using self-drilling / self-tapping screws of size 5.5 x 55mm with EPDM seal complete. Also, the L-flashings, corner trims and barge boards are to be carried out with similar sheeting complete. item7 45 Sq.m
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail