Construction Of Glass Room With Aluminium Frame , Well Furnish Ceiling And Laying Of Iron Stair To First Floor At C/Hall Hemishukpachan Construction Of Glass Room With Aluminium Frame Well Furnish Ceiling And Laying Of Iron Stair To First Floor At C/Hall

Tender Notice

28120672
Construction Of Glass Room With Aluminium Frame , Well Furnish Ceiling And Laying Of Iron Stair To First Floor At C/Hall Hemishukpachan Construction Of Glass Room With Aluminium Frame Well Furnish Ceiling And Laying Of Iron Stair To First Floor At C/Hall
Indian
Jammu And Kashmir
08-06-2021
21-06-2021
23-06-2021

Tender Details

Construction Of Glass Room With Aluminium Frame , Well Furnish Ceiling And Laying Of Iron Stair To First Floor At C/Hall Hemishukpachan Construction Of Glass Room With Aluminium Frame Well Furnish Ceiling And Laying Of Iron Stair To First Floor At C/Hall Hemishukpachan

Key Value

Document Fees
INR 1000 /-
EMD
INR 20000.00 /-
Tender Value
Refer document

BOQ Items

Name of Work:- Construction of glass room with Aluminium frame, well furnish ceiling and laying of iron stair to first floor at community hall at Hemishukpachen.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Providing and laying of stone soling by hand packing in horizontal level all complete job.\n\n\n 1.51 Cum
2 2 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Nallah.\n 4.58 Cum
3 3 Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc complete. A) Using 125mm heavy round pole. \nB) Using 80x40x4mm Tublar pipe. C) Using HR Plate 5mm on top and bottom of each pole: 1937.62 Kg
4 4 \nProviding and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber/ neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15). Top = (63x38x1.85)mm Bottom = (114x45x1.75)mm 372.49 Kg
5 5 For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15). Door (85x45x1.4)mm Window (45x45x1.4)mm 56.61 Kg
6 6 \nProviding and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass I stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.( Pre-laminated particle board with decorative lamination on both sides). \n\n 15.04 Sqm
7 7 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.50 mm thickness (weight not less than 13.50 kg/sqm) 105.34 Sqm
8 8 \nProviding and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminium.\n 14 Nos
9 9 \nProviding and fixing tower bolt barrel type aluminium ISI marked. Door\n 2 Nos
10 10 \nProviding and fixing tower bolt barrel type aluminium ISI marked. Window\n 20 Nos
11 11 \nProviding corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal /vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape where ever required. 154.67 Sqm
12 12 Carriage of cement and steel lead of 80Km. 2.93 MT
13 13 Carriage of Sand and aggregate lead of 20Km. 6.22 Cum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail