}

Construction Work At Govt . Sr . Sec . School Koorbada Block-Neem Ka Thana Dist-Sikar, KOORBADA BLOCK-NEEM KA THANA DIST-SIKAR-Rajasthan

Sarva Shiksha Abhiyan Authority-SSAA has published Construction Work At Govt . Sr . Sec . School Koorbada Block-Neem Ka Thana Dist-Sikar. Submission Date for this Tender is 13-06-2021. Building Work Tenders in KOORBADA BLOCK-NEEM KA THANA DIST-SIKAR Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

28090628
Construction Work At Govt . Sr . Sec . School Koorbada Block-Neem Ka Thana Dist-Sikar
National Competitive Bid
Indian
Rajasthan
KOORBADA BLOCK-NEEM KA THANA DIST-SIKAR
13-06-2021

Tender Details

Construction Work At Govt . Sr . Sec . School Koorbada Block-Neem Ka Thana Dist-Sikar

Key Value

Document Fees
INR 1000 /-
EMD
INR 8000.0 /-
Tender Value
INR 8 Lakhs /-

BOQ Items

Name of Work:MJSY 2021-22 Strengthening work of GOVT.SR.SEC.SCHOOL KOORBADA, BLOCK- NEEM KA THANA, DIST-SIKAR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Part-A : Civil Work
2 1.01 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils BI01010001010000000000000515BI0100001113 38.24 Cum
3 1.02 P.C.C. IN FOUNDATION Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8(1 cement:4 Coarse sand :8 gradeed stone aggregate 40 mm nominal size). 11.89 Cum
4 1.03 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in cement mortat 1:6 (1-Cement: 6- Sand) 42.41 Cum
5 1.04 DPC:-Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required excluding the cost of centering, shuttering and reinforcement . M20 Grade Nominal Mix/Design mix. 2.7 Cum
6 1.05 Brick work with clay flyash F.P.S brick (IS 13757-1993)of class designation 75 in superstructure above plinth level upto floor five level in: cement Mortar 1:6 (1-Cement:6Coarse sand) 18.74 Cum
7 1.06 Slab & Beams:-Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.\nM20 grade Nominal Mix / Design Mix 15.29 Cum
8 1.07 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. 131.68 Sqm
9 1.08 Steel Reinforcement:-P/F reinforcement for RCC work including straightening,cutting, bending, placing in position and binding (including cost of binding wire) all complete upto floor five leveTMT bars (Conforming of relevent IS Code). 2343.84 Kg
10 1.09 Door Frames:-Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :Size 100 x 75mm. 15 Mtr
11 1.1 Doors:-Providing and fixing M.S. sheet 1mm thick double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 4.62 Sqm
12 1.11 Glazed Window:Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Partly fixed and partly openable [ fixed area not to exceed 33%] 8.74 Sqm
13 1.12 Wire Gauge Supplying & fixing fixed wire Gauge of 14 mesh X 24 Gauge to the Metal frame of rolled section by metal beading 20X3mm with suitable screw at not exceeding 150mm distance. 8.74 Sqm
14 1.13 Guard Bars: P&F square bars or other flat welded to window/ventilators etc., Guard bar 12 x12mm 73.22 Kg
15 1.14 Supplying and Filling sand (Good Earth) underfloor in layers not exceeding 20cm in depth i/c excavation, cartage (upto 1Km.). Watering, Ramming, Consolidating each deposited layer & dressing complete i/c cost of sand. 49.74 Cum
16 1.15 Stone Kharanja: RR Dry stone kharanja under floor 8.61 Cum
17 1.16 Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm 68.32 Sqm
18 1.17 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete(For area of each slab upto 2001 Sqcm) 3.79 Sqm
19 1.18 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 12 mm thick 99.76 Sqm
20 1.19 Outer Plaster:-Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 20 mm thick 190.96 Sqm
21 1.2 Plaster(Ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) 76.81 Sqm
22 1.21 Black Board : Plaster on new surface on wall in cement sand mortar 1:3 including raking of joints etc. complete fine finish: 12mm thick 3.06 Sqm
23 1.22 Level Coarse -Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 4.44 Cum
24 1.23 Gola Providing gola 75mm x 75mm in cement concrete 1:2:4(1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge) including finished with cement mortar 1:3(1 cement: 2 fine sand) as per standard design. 29.94 Mtr
25 1.24 Internal Finishing: Distempering with oil bound washeble distemper of approved brand and manufacture to give an even shade including all scaffolding new work (two or more coats) over and including scrapping and priming coat with cement primer 176.57 Sqm
26 1.25 Exterior Finishing: Finishing wall with water proofing cement paint of appd brand & manufacture and of reqd. shade to give an even shade including all scafolding New work (three or more coats applied at the rate of 3.84 kg/10 sqm) 190.96 Sqm
27 1.26 PANTING ON DOORS & WINDOWS :- Painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shade new steel work (2 or more coat on new work). 59.35 Sqm
28 1.27 Copping: Cement concrete flooring 1:2:4 (1 cement: 2 Course sand: 4 Greded stone aggregate) finishing with a floating coat of neat cement including cement slurry, making of lines or groove etc. complete but excluding the cost of nosing of steps etc. complete : 40mm thick with 20mm thick nominal size aggregate. 7.2 Sqm
29 1.28 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110mm dia 9 Mtr
30 1.29 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5 110mm dia 8 No
31 1.3 Pipe Clip 110 mm dia 12 No
32 1.31 Providing and laying in position specified grade of cement concrete for RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement:3 coarse sand) and making good the joints and cost of plastisers (if required ) excluding the cost of centtering shuttering and reinforcement,M 20 grade nominal mix/ design mix. 0.9 Cum
33 1.32 COLUMN- Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix 1.24 Cum
34 1.33 Column Footing;-Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for foundation, footings, strap beam, raft, base of column etc 3.6 SQM
35 1.34 COLUMN :-Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for columns, pillers, posts,and struts etc 16.32 SQM
36 3 PART-C (Electric Work) Based on BSR PWD 2013, Jaipur Circle
37 3.01 Wiring of light point/fan point/exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make group-2
38 3.02 Short point (up to 3 mtr.) 1 each
39 3.03 Medium point (up to 6 mtr) 4 each
40 3.04 Long point (up to 10 mtr) 5 each
41 3.05 Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make in surface/reces group -2
42 3.06 On board 3 each
43 3.07 S & F follwing sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using clamps, fastener as required including cutting the wall , covering conduit with wire mess and making good the same as required. Group-2
44 3.08 25 mm dia 30 Mtr
45 3.09 Supplying and drawi;ng FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface ofr necessed conduit/ casting capping including making connections etc. as required. Group-2
46 3.1 2 x 1.5 sq. mm 40 Mtr
47 3.11 2 x 2.5 sq. mm 30 Mtr
48 3.12 P & F 240/415 V MCB of breaking capacity not less than 10 KA (B/C/D tripping characteristic) ISI marked IS 8828 (1996)/conforming to IEC 60898 in existing board/ sheets including making connections with lugs, testing etc. as required. Group-2
49 3.13 6 A to 32 A rating 1 each
50 3.14 P & F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with 100 Amp copper copper bus bar, shorting link, neutral, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB termination with copper lux, testing etc. as reqd. . group-2
51 3.15 Single door(Single Phase) 8 way 1 each
52 3.16 P & F strip fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating/stove enamelled non corrosive UV resist EP channel) complete with accessories(Low loss copperchoke, starter, starter seat)/Electronic choke with terminal block duely prewired with copper conducter including making connection, testing etc. as required(Without tube)
53 3.17 1x36 watts with OCCB. Group-2 5 each
54 3.18 P & F Fluorscent tube rod in existing fixtures as required, minimum 3 star rating,36/40 watts 7 each
55 3.19 P/I aying PVC insulated & PVC sheathed cable of 1.1 kV grade with aluminium conductor of IS:1554 P-I of Groups of approved make in ground as per IS:1255 including excavation of 30cm x 75cm size trench, 25cm thick under layer of sand, Iind class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size 6 sqmm, 4 core arm 8 MTR
56 3.2 P & F star rated double ball beari;ng capacitor start, aluminium body and blade ceiling fan with down rod upto 30 cm with 3x1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required. Group-1 ,1200 mm sweep 3 star rated
57 3.21 1200 mm sweep 3 star rated 5 each
58 3.22 P & F socket size flush type 120/280 watt rotary 5 step fan regulator including making connection testing etc. as required Group-1 5 each
59 3.23 P & F IS:371 marked 6 amp sufface type celling rose inculuding making commection testing etc. group-2 1 each
60 3.24 P & F IS:371 marked 6 amp sufface type celling rose inculuding making commection testing etc. grup-2 (E071400) 8 each
61 3.25 P & F 18 swg MS Recessed fan box, hexagonal/round of size 130mm dia, depth 75 mm , 12mm dia rad fan hook with 100mm length extended on eeach side. gourp-1 (E170500) 5 each
62 3.26 P & F 18 SWG Sheet steel boxes duly finisded with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surfacae or in recessed as required. 175mmX 100mmX60mm (E050100) 3 each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail