| 1 |
1 |
Dismantling of asbests cement (corrugated, semi corrugated, etc) sheets in roof coverings. complete all as specified and directed. |
|
795 |
Sqm |
| 2 |
2 |
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
|
760 |
Sqm |
| 3 |
3 |
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding t wall, fixed with self tapping screws as specified. |
|
35 |
Sqm |
| 4 |
4 |
Dismantling timber scantling 40 sqcm and over in section, an any position (framed) |
|
4 |
Cum |
| 5 |
5 |
Ditto all as per item No 04 above but fillet rails, post rafter purlin etc under 40 sq cm in section (unframed) |
|
288 |
RM |
| 6 |
6 |
S&F Rolled section as in main and cross beam hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. Gde Fe 410 -W (Gde- E- 250) quality- A including one shop coat of zinc chrome primer complete all as specified and directed. |
|
5820 |
Kg |
| 7 |
7 |
S&F Mild steel for roof trusses (framed), trussed purlins, crane gantires, rails and fasternings and heavy bracket framming (beam, tee, angle, channel or flat sections ) incuding distance pieces, clats etc. and confirm to Gde Fe 410 -W (Gde- E- 250) quality- A including one shop coat of zinc chrome primer complete all as specified and directed. |
|
4200 |
Kg |
| 8 |
8 |
S&F for gusset plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk foring holes, without any attachement to Fe-290 (Gde E-165).Make-SAIL/RINL/TISCO/Jindal Steels and Power Ltd or equivalent as approved by GE. |
|
2960 |
Kg |
| 9 |
9 |
S&F mild steel bolts,purpose made,with hexagonal or square head one end and screwed the other,or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long dia of neck in exc 12 n.exc 20mm complete all as specified and directed. |
|
40 |
Kg |
| 10 |
10 |
M&L for PCC 1:2:4 type B2 using 40 mm graded stone agreegate as in Bed block. |
|
14 |
Cum |
| 11 |
11 |
M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed. |
|
400 |
Sqm |
| 12 |
12 |
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed. |
|
490 |
Sqm |
| 13 |
13 |
S&F, false ceiling, at any height, 600 x 600mm grid with Armstrong 'Prelude XL 32' grid system and 16mm thick mineral fibre acoustic tile 'RH - 99 Classic lite' with suspension system complete all as specified and per manufacturer's instruction complete all as specified and directed. |
|
490 |
Sqm |
| 14 |
14 |
Demolition of brickwork or stone masonry, built in cement mortar including all quions,arches,pillars,etc,but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
|
70 |
Cum |
| 15 |
15 |
M&L old size brick work with sub class 'B' old size built in CM 1 : 6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed. |
|
40 |
Cum |
| 16 |
16 |
M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1 :4 complete all as specified and directed. |
|
259 |
Sqm |
| 17 |
17 |
Taking down cement or cement lime plaster, any description on stone walls etc incl raking out joints hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
|
3370 |
Sqm |
| 18 |
18 |
M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1 : 6 complete all as specified and directed. |
|
1100 |
Sqm |
| 19 |
19 |
M&L rendering 05mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with WPC @ 3 % by the weight of cement used and finishing even and smooth without using extra cement. complete all as specified and directed. |
|
1100 |
Sqm |
| 20 |
20 |
M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1 : 6 and finishing even and smooth without using extra cement. complete all as specified and directed. |
|
2400 |
Sqm |
| 21 |
21 |
Supply only integral water proofing compound |
|
305 |
Kg |
| 22 |
22 |
M&L for rendering 05mm thick in CM (1:3)on fair faces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified |
|
300 |
Sqm |
| 23 |
23 |
M&L for preparing new plastered or un-plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed. |
|
300 |
Sqm |
| 24 |
24 |
M&L for preparation of new plastered surface of wall and appling two coat of oil bound destember over a coat of chalk whiting complete all as specified and directed. |
|
2400 |
Sqm |
| 25 |
25 |
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
|
1100 |
Sqm |
| 26 |
26 |
Taking down chowkats or frame of any description n exc 1.5 Sqm each (without taking off shutters from the frames) complete as specified and directed. |
|
48 |
Each |
| 27 |
27 |
Taking down chowkats or frame of any descrip tion exc 1.5 Sqm each and n.exc 4 Sqm (without taking off shutters from the frames) complete as specified and directed. |
|
128 |
Each |
| 28 |
28 |
M&L cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1, Exc. Half brick but not exc. One brick, Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall |
|
192 |
Each |
| 29 |
29 |
S & F mild steel flat iron as in hold fast and similar small articles conforming to Fe 290 Gde E 165 complete all as specified and directed. |
|
150 |
Kg |
| 30 |
30 |
S&F 2nd class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
|
2.5 |
Cum |
| 31 |
31 |
M&L Preparing surface of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint and Sanding newly tarred or painted surfaces with clean sharp sand complete all as specified and directed. |
|
43 |
Sqm |
| 32 |
32 |
Providing and fixing factory made PVC internal door frame of thesize 50mm x47mm made out of 5mm plain, made out of extruded 5mm thick prelam PVC sheet of density 600kgs/cbm manufactured by an ISO-9000 certified company mitre,mitre cut at two corners and joined with 4 nos .of 150mm long brackets of 15mm x15mm M.S. tube of 19 guage through out the frame .The door frame shall be fixed to the wall using 65/100mm long M.S. screws through the frame by using anchor fasteners.A minimum of 4 nos .of screw to be provided for each vertical member & minimum 2 nos. for horizontal members etc. complete as per manufactures specification and direction by Engr-in-charge. |
|
80 |
RM |
| 33 |
33 |
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm prelam PVC Sheet on back face, complete all as specified. |
|
22 |
Sqm |
| 34 |
34 |
S&F, 35mm thick, second class HW in glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed by Eng-in-Charge. |
|
32 |
Sqm |
| 35 |
35 |
S&F 35 mm thick, 2nd class hard wood factory made, plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
|
96 |
Sqm |
| 36 |
36 |
M&L for 25mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work, fixed in repairs complete all as specified. |
|
60 |
Sqm |
| 37 |
37 |
S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber frame work in cup boards, rebated or flat edged complete all as specified and directed. |
|
66 |
Sqm |
| 38 |
38 |
M&L for 6mm thick external teak wood lipping fixed to18/19mm thick block or Veneered particle boards with nails complete all as specified and directed. |
|
313 |
Rm |
| 39 |
39 |
S&F continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed. |
|
120 |
Rm |
| 40 |
40 |
S&F hasp & staples 125mm in size, safety type alu. anodised fixed with screws. |
|
16 |
Each |
| 41 |
41 |
S&F 100 mm long butt hinges PTMT of standard colour of PVC doors fixed with steel crews complete all as specified and directed. |
|
48 |
Each |
| 42 |
42 |
S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed. |
|
192 |
Each |
| 43 |
43 |
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised. |
|
224 |
Each |
| 44 |
44 |
S&F, aluminium, anodised barrel tower bolt of extruded section and fixed 150 mm of size |
|
224 |
Each |
| 45 |
45 |
S&F, 250mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cost or extraded sections and fixing bolts and sliding bolts of extraded sections or cost aluminium alloy complete all as specified and directed. |
|
48 |
Each |
| 46 |
46 |
S&F, 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed. |
|
16 |
Each |
| 47 |
47 |
S&F 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed. |
|
16 |
Each |
| 48 |
48 |
M&L for anodised aluminium frame/shutters for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
|
705 |
Kg |
| 49 |
49 |
S&F 4mm thick Sheet glass, ordinary quality with and including neoprene beadings in square nexc 0.5 sq.m in each pane complete all as specified and directed. |
|
63 |
Sqm |
| 50 |
50 |
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinted tacks or galvanised wire staple complete all as specified and directed. |
|
39 |
Sqm |
| 51 |
51 |
S&F MS framed work such as grills, guard bars of window and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) complete all as specified and directed. |
|
390 |
Kg |
| 52 |
52 |
S&F, in repairs, 25mm dia, stainless steel, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets, complete all as specified and directed. |
|
180 |
RM |
| 53 |
53 |
M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
|
80 |
Sqm |
| 54 |
54 |
M&L for preparation of old primer wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
|
300 |
Sqm |
| 55 |
55 |
Demolition of cement concrete(unreinforced)in ground floors and pavings n exc 15cm thickness(below or above ground level) complete all as specified and directed. |
|
70 |
Cum |
| 56 |
56 |
M&L PCC 25mm thick type B-1, 1 : 2 : 4 (20mm graded aggregate) as in sub-base to receive floor finishes complete all as specified and directed. |
|
997 |
Sqm |
| 57 |
57 |
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
|
1095 |
Sqm |
| 58 |
58 |
Dismantling stone slab and tiles of any description or thickness in floors,aprons etc complete all as specified and directed. |
|
2 |
Ten Sqm |
| 59 |
59 |
M&L for vitrified ceramic tiles light shade 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4complete all as specified and directed. |
|
515 |
Sqm |
| 60 |
60 |
M&L for vitrified ceramic tiles light shade 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm as in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed . |
|
90 |
Sqm |
| 61 |
61 |
M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed. |
|
335 |
Sqm |
| 62 |
62 |
M&L, Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed |
|
48 |
Sqm |
| 63 |
63 |
M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.6 sqm but not exceeding 0.11sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed. |
|
107 |
Sqm |
| 64 |
64 |
M&L Coloured glazed ceramic tiles of size 300 x 200 x 7mm thick,on vertical wall surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 10mm thick backing coat in CM 1:3 complete all as specified and directed. . |
|
326 |
Sqm |
| 65 |
65 |
M&L for heavy duty, exterior grade ceramic tiles (Durastone of Somany/Endura of Johnson or equivalent as approved by GE) of size 300 x300x 10mm thick, set, jointed and pointed in neat cement slurry in trades/risers, landing with white cement and pigment over and including screed bed or bedding layer of 15 mm thick cement mortar (1:4) complete all as specified and directed. |
|
37 |
Sqm |
| 66 |
66 |
M&L for 18-20mm thick black granite stone slab (one slab in size) machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. |
|
20 |
Sqm |
| 67 |
67 |
M&L for rounding to edges of stone slabs two edge full round,such as in steps,cooking platform and other similar situation complete all as specified and directed. |
|
105 |
Rm |
| 68 |
68 |
M&L for 75mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed. |
|
127 |
Sqm |
| 69 |
69 |
S & F white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, PVC flexible pipe, 600mm size for 15 mm bore pipe with brass nut, washers and Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap etc complete complete all as specified and directed. |
|
16 |
Each |
| 70 |
70 |
M&L for taking down , chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer SBR Latex or equivalent as approved @ 5 Ltrs per 50 Kg bag of cement complete all as per manufacturer's Specifications/instructions and as directed.\nNote :-( New reinforcement or Welded wire fabric) will be measured and paid separately) |
|
216 |
Sqm |
| 71 |
71 |
S&F vitreous china wash down water closet pan (pedestal pattern) including 'P' or "S" trap and including water closet seat cover complete all as specified and directed . |
|
16 |
Each |
| 72 |
72 |
S&F, in repairs, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed. |
|
16 |
Each |
| 73 |
73 |
S&F, in repairs chromium plated over head shower 100mm dia round shape single flow (ABS Body chrome plated with Gray face plate) with rubit cleaning system complete all as specified and directed as per Cat No EOS-542N of Essco or equivalent make as listed in List of make . |
|
16 |
Each |
| 74 |
74 |
S&F, in repairs chromium plated, Towel Rail 600mm Long Make- AEC-ESS-1111N Range: Accessories of Essco or equivalent make as listed in list of make |
|
16 |
Each |
| 75 |
75 |
S&F, in repairs, 15mm brass chromium plated bib cock with wall flange, complete all as specified and directed as per Cat No MQT-511 of Essco or equivalent as listed in list of make |
|
32 |
Each |
| 76 |
76 |
S&F, in repairs, stop valves angular, chromium plated for iron pipe or for unions and fixed to 15mm bore pipe, complete all as specified and directed as per Cat No MQT-513A of Essco or equivalent make aslistede in list of make.\n |
|
48 |
Each |
| 77 |
77 |
S&F in repair, concealed stop cock heavy body casted cap 15mm chromium plated for iron pipe or for union and fixed to 15mm bore pipe, complete all as specified and directed as per Cat No MQT-514A of Essco or equivalent make as listed in list of make. |
|
16 |
Each |
| 78 |
78 |
S&F only 15mm pillar taps, brass chromium plated fancy type with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe or for union and fixed to 15mm bore pipe, complete all as specified and directed. |
|
16 |
Each |
| 79 |
79 |
S&F in repair 8mm dia brass chromium plated health faucet (hand shower) with 01m long flexible tube and wall hook complete all as specified and directed. Make : Jaquar Cat No ALD-573 or equivalent as approved by GE. |
|
16 |
Each |
| 80 |
80 |
S&F in repairs 25mm bore dia of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
|
16 |
Each |
| 81 |
81 |
S&F 50mm, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc in repairs.\n |
|
16 |
RM |
| 82 |
82 |
S&F in repairs 600X450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers.\n |
|
16 |
Each |
| 83 |
83 |
S&F PVC connections 15mm size with PTMT nuts of length 450mm |
|
32 |
Each |
| 84 |
84 |
Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. |
|
220 |
RM |
| 85 |
85 |
Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. |
|
160 |
RM |
| 86 |
86 |
Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed. |
|
130 |
RM |
| 87 |
87 |
S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed. |
|
210 |
RM |
| 88 |
88 |
S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed. |
|
150 |
RM |
| 89 |
89 |
S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed. |
|
120 |
RM |
| 90 |
90 |
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.\n |
|
10 |
RM |
| 91 |
91 |
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed. |
|
10 |
RM |
| 92 |
92 |
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed. |
|
10 |
RM |
| 93 |
93 |
Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing or concealed conduit wiring, etc and making good, cutting exceeding 20cm girth, complete all as specified and directed. |
|
70 |
RM |
| 94 |
94 |
S&F rotational moulded polyethylene water storage tanks of capacity 500 Litres (Cylindrical vertical with closed top)hoisted and fixed in position all as specified in SSR-Part-I including disconnecting and removal of old u/s PVC tank complete all as specified and directed. |
|
16 |
Each |
| 95 |
95 |
Supply only 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) all as specified and directed. |
|
16 |
Each |
| 96 |
96 |
Dismantling of 75 OR 100mm dia cast iron , SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortor and taking out of trenches if required. |
|
172 |
RM |
| 97 |
97 |
S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/ walls. \n |
|
60 |
RM |
| 98 |
98 |
S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls. |
|
112 |
RM |
| 99 |
99 |
S&F PVC (SWR) bends of any radius with oval and access door of 110mm dia. |
|
8 |
Each |
| 100 |
100 |
S&F PVC (SWR) junction single, (Single T) equal or unequal suitable for 110mm bore pipe. complete all as specified and directed. |
|
16 |
Each |
| 101 |
101 |
S&F PVC (SWR) vent cowl of 110mm dia. complete all as specified and directed. |
|
8 |
Each |
| 102 |
102 |
S&F PVC (SWR) Floor/ Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4). complete all as specified and directed. |
|
16 |
Each |
| 103 |
103 |
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete fixed all as specified. |
|
8 |
Each |
| 104 |
104 |
M&L for 75mm thick cement concrete type C2 1:3:6 (40mm graded aggregate) complete all as specified & as directed. |
|
400 |
Sqm |
| 105 |
105 |
M&L for cement concrete type B-1 1:2:4 (20 mm graded aggregate) as in coping, kneelers, apex stones, bed plates, kerbs complete all as specified and as directed |
|
4 |
Cum |
| 106 |
106 |
S&F Machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness ,M-35 Grade ,with grey cement & pigment interstion filled with sand and bedded with and including 50 mm thick sand cousion laid uniformly and duly compected with plate vibrator complete all as specified & as directed. \n |
|
400 |
Sqm |
| 107 |
107 |
S&F welded steel wire fabric, cut to length, fixed to steel members/ reinforcement steel, weigh per Sqm not exc. 4 Kg. complete all as specified and directed. |
|
484 |
Kg |
| 108 |
108 |
Taking down carefully UNSV copper/aluminium point wiring (light, fan, bell, power sockets) along with UNSV fittings/fixture such as switches, ceiling roses, pendants, regulators, sockets, electric fitting, light fittings including serviceable fitting/fixture and making good the disturbed surface |
|
304 |
Point |
| 109 |
109 |
Taking down carefully old UNSV light fitting of any type/any size removing material to store for keeping in safe custody or for taking credits (credit for above items should be made as per condition seperately). |
|
152 |
Each |
| 110 |
110 |
Taking down carefully old UNSV DB Box/TPN DB of any type/any size including US MCB SPN/SP removing material to store for keeping in safe custody or for taking credits (credit for above items should be made as per condition seperately). |
|
18 |
Each |
| 111 |
111 |
Taking down carefully old UNSV of earthing with galvanized iron earth plate electrode 60cm X 60cm X 60mm thickburied directly in ground vertically to a deapth and including earth lead GI wire 4mm dia by means of volts and nuts, check nuts and washers etc all as specify and directed |
|
2 |
Each Job |
| 112 |
112 |
Taking down carefully old UNSV submain wiring of any type/any size removing material to store for keeping in safe custody or for taking credits (credit for above items should be made as per condition seperately). |
|
597 |
RM |
| 113 |
113 |
Taking down and refixing old Geyser of capacity 25/50 ltr.including incoming and outgoing electric and water connection connections etc complete. |
|
16 |
Each |
| 114 |
114 |
M & L for point wiring with PVC insulated 1100 volts grade, unsheathed, copper multi stranded conductor, 1.5 sqmm size cable drawn in and including PVC casing capping 32x12 mm complete with all accessories like bend, tee, junction box etc along with one No PVC insulated , 1100 volts grade, unsheathed copper multi stranded conductor, 1.5 sqmm size as continuous earth wire (conductor) connected to comman earth dolly using colour code and terminating in new MS suitable concealed boxes covered with laminated sheet cover 3.00 mm thick sheet and cadmium screws, cup washers complete all as specified and directed for the following :- |
|
|
|
| 115 |
114.01 |
(a)One light/fan point controlled by one switch with 1.5 Sq. mm nominal area cable in & including rigid PVC heavy duty concealed conduit. |
|
200 |
Point |
| 116 |
114.02 |
(b)One light point controlled by 2- two way switch with 1.5 Sq. mm nominal area cable in including rigid PVC heavy duty concealed conduit. |
|
4 |
Point |
| 117 |
114.03 |
(c)One bell/ buzzer point controlled by one push button on same board with other switches or independent with cable 1.5 sqmm |
|
16 |
Point |
| 118 |
114.04 |
(d) one multi pin socket2/3 , 5 Amps, independent |
|
32 |
Point |
| 119 |
114.05 |
(e)One 5 amps socket outlet on the same board controlled by another switch |
|
48 |
Point |
| 120 |
115 |
All as per item No 114 above but for 15 amps socket point on independent board using cable 2.5 sqmm.for phase and earth wire \n |
|
32 |
Point |
| 121 |
116 |
M & L switch piano flush button single pole, one way 5 amps complete. |
|
280 |
Each |
| 122 |
117 |
Supply fixing switch Piano, flush type, single pole, two ways, 5 Amp complete all as specified and as directed by the Engineer – In –Charge |
|
8 |
Each |
| 123 |
118 |
Supply fixing bell push, flush type, 5 Amp, 240 volt single pole complete all as specified and as directed by the Engineer – In –Charge \n\n |
|
16 |
Each |
| 124 |
119 |
M & L socket outlet 3 pin, 5 amps flush type complete. |
|
80 |
Each |
| 125 |
120 |
M & L socket outlet purpose, 3 pin 15 amps and 3 pin 15 Amps controlled by one switch complete. |
|
32 |
Each |
| 126 |
121 |
M & L switch piano flush button single pole, one way 15 amps complete. |
|
32 |
Each |
| 127 |
122 |
M & L ceiling rose, 3 pin surface, white /any shade , three terminal. |
|
184 |
Each |
| 128 |
123 |
S & F buzzer Ding Dong AC 230 volt, single pole, complete all as specified and as directed by the Engineer – In –Charge |
|
16 |
Each |
| 129 |
124 |
S & F lamp holder , insulated body with back plate including 9W LED bulb 230V Aii as specified and directed |
|
32 |
Each |
| 130 |
125 |
S & F, in repair, 1x20W Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. 4 feed long with surge protection not less then 4KV . Make- havells cat no ENDURALINEARNEOBS20WLED865SPCWH or equvalentmake as spcified in list of make. |
|
84 |
Each |
| 131 |
126 |
S & F, in repair, 1x10W Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. 2 feed long for mirror light.. Make- havells cat no ENDURALINEARNEOBS10WLED865SPCWH or other make as speicified in list of make. |
|
16 |
Each |
| 132 |
127 |
S&F, in repairs, sheet metal enclosures, single pole & neutral with a two pin & earth plug and socket complete with one single pole, MCB of 20 Amps, 10 KA, 240 volts complete all as specified and directed |
|
16 |
Each |
| 133 |
128 |
S & F light fitting 1 x 13.5W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V, 50 Hz complete make as per Havells cat no. LHEXCGP7IN5W013 or equvalent make as spicified in list of make. |
|
16 |
Each |
| 134 |
129 |
Taking down ceiling fan and Painting of complete, in situwith synthetic enamel paint by spraying including scrapping, filling ,cavities with filler, onecoat after cleaning all dust etcand refixing of ceiling fan single phase,AC 230/240 Volts, 50 Hz, 1200mm sweep ISI Marked complete with bladed indcluding provision of hanging on roof wall complete all as specified and directed. |
|
32 |
Each |
| 135 |
130 |
S & F in replacement of ceiling fan regulators, electronic,step type AC, 230 Volts suitable for 1200mm sweep all as specified and directed. |
|
32 |
Each |
| 136 |
131 |
Taking down and Refixing old energy meters of rating 10-40 Amps including making incoming and outgoing connections etc complete. |
|
16 |
Each |
| 137 |
132 |
S & F in repair sheet metal distribution board SPN DB Double door factory made and tested complete protection class IP-43 suitable for mounting MCBs , isolator with 200 amps tinned copper bus bar capacity 08 way, 240 volts complete. |
|
16 |
Each |
| 138 |
133 |
S & F in repair miniature circuit breakers single pole and neutral type curve C 10 KA 40 Amps 230 volts complete all as specified and directed |
|
16 |
Each |
| 139 |
134 |
S & F in repair MCB type 'C' 10 KA, Single pole 0.5 to 5 amps. |
|
5 |
Each |
| 140 |
135 |
S & F in repair MCB type 'C' 10 KA, Single pole 6 to 32 amps. |
|
96 |
Each |
| 141 |
136 |
S& L Two single core PVC insulated unsheathed cable with multi stranded copper conductor of size 4 Sq.mm as AC circuit wiring and sun main wiring including suitable size of PVC Casing Caping including PVC insulated unsheathed copper conductor cable of size 4Sq mm as an each continuity conductor complete all as specified and as directed by Engr- In Charge . |
|
597 |
RM |
| 142 |
137 |
Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6 mm buried directly in ground vertically in pit of depth not less than 2.25 meter below normal ground level with top edge of the earth plate at a depth not less than 1.5 meter below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron wire 4 mm dia by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore dia (light grade) connected to main switch board all as shown in electrical plate No. 5 of SSR-1991 Part I and including necessary excavation and earth work, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC type C-1 chamber, CI cover and MS frame etc., complete all as specified. Note: The unit rate includes earth wire and protection pipe up to (maximum 7.5 metre from earth plate) earth point/test point. |
|
2 |
Each Job |
| 143 |
138 |
S & F, LED security light 25 watt wall mounted alongwith bracket made out of light grade, Galvanised steel tube of suitable size etc complete with all accessories and including connection up with twin core flexible copper conductor cable with suitable size coomple as all specified and directed. |
|
4 |
Each |
| 144 |
139 |
Provision of Telephone socket 2 pin flush type for telephone with 3mm thick plasticlaminated sheet cover of adequate size and terminal base complete all as specified and directed incl Telephone point wiring with twin core PVC insulated & sheathed cable with copper conductor single strand of size 0.7mm dia with resistance less than 1.00 ohm through in & including PVC Casing Capping of suitable size through wall and casing & caping of suitable size on wall with all accessories complete such as GI flush metal box required to mount modular telephone socket etc. all as specified and directed.\nNote:- (ii) The other end of telephone with outside Qtr shall have terminal box with telephone socket arrangement outside qtr & the cost of this shall be deemed to be included in quoted rates. |
|
16 |
Each |
| 145 |
140 |
Supply and fixing Exhaust fan Size 250 mm Sweep metal body , PVC body Single phase 240Volts including provision of hole and making good all as specified and directed |
|
16 |
Each |
| 146 |
141 |
Supply, install testing and commissioning of factory made CPRI LT panel wall mounted board made out of CRCA sheet of 2 mm thick indoor type totally enclosed weather, dust and vermin proof with front opening hinged door and locking arrangement mounted on MS flat iron clamp welded to panel body duly grouted in wall ,compartment type, 415 volts 3 phase , 4 wire AC 50 HZ having aluminium bus bar 25 mm x 10 mm for phase and the neutral insulated with PVC sleeves, space for fixing single phase KWH electric meter suitable capacity 08 Nos, 40 mm x 40 mm x 6 mm size angle iron bracket hold fast, fastener bolts, copper lugs, spacers, mounting channels, rubber , gasket locking knobs , hylam sheet pieces, PVC shrinkable sleeves, nuts and bolts , washers etc suitable single core copper wire connections, suitable compartments and epoxy power spray paint with primer complete all as specified. |
|
2 |
Each job |
| 147 |
141.01 |
INCOMMING |
|
|
|
| 148 |
141.02 |
(A) MCCB 415 Volts 4 pole 25KA breaking capacity of 100 amps-01 No |
|
|
|
| 149 |
141.03 |
(b) R-Y-B phase, LED indicating lamp - 03 Nos |
|
|
|
| 150 |
141.04 |
(C) 200 amp TPN main aluminium bus bar |
|
|
|
| 151 |
141.05 |
OUTGOING |
|
|
|
| 152 |
141.06 |
(a) MCB SPN 40 Amp = 08Nos |
|
|
|
| 153 |
141.07 |
(b) Space for mounting single phase energy meter-08 Nos |
|
|
|
| 154 |
141.08 |
© copper wire 10 sqmm wire and open terminals for all feeders |
|
|
|
| 155 |
142 |
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole,laying of cables etc in soft/loose soil and getting out. |
|
75.6 |
Cum |
| 156 |
143 |
Returning filling in including spreading, leveling, watering and well ramming in layer not exc 25 cm. |
|
34.6 |
Cum |
| 157 |
144 |
Removing excavated material not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point. |
|
41 |
Cum |
| 158 |
145 |
M&L for providing dry river sand as in sand cushioning to UG cable including punning gently all as directed. Note : Depth after punning shall be measured and paid. |
|
23 |
Cum |
| 159 |
146 |
M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundtion of PCC poles/struts all as specified and directed. |
|
0.25 |
Cum |
| 160 |
147 |
Taking out sub class burnt bricks from the trenches and stacking at site serviceable /unserviceable bricks for reuse. |
|
2230 |
Each |
| 161 |
148 |
Laying only sub class brunt bricks as cable protection cover all as directed. |
|
230 |
Each |
| 162 |
149 |
Supply and laying sub class old 'B' burnt bricks, laid as cable protection cover complete all as specified and directed. |
|
2000 |
Each |
| 163 |
150 |
S&F, in repair, GI pipe, 40mm bore, light grade, laid below road/fixed along the poles / walls with necessary clamping, etc complete all as per specified and directed. |
|
10 |
RM |
| 164 |
151 |
Taking down carefully all unsv cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm, 3.5 core |
|
300 |
RM |
| 165 |
152 |
Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm, 3.5 core |
|
300 |
RM |
