Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-07-2021 | Corrigendum-4 | Date | 15-07-2021 |
| 2 | 26-06-2021 | Corrigendum-3 | Other | 02-07-2021 |
| 3 | 22-06-2021 | Corrigendum-2 | BOQ | 02-07-2021 |
| 4 | 10-06-2021 | Amendment to Tender | Other | 02-07-2021 |
| Name of Work: Addition /Alteration & Special repairs MD Accn Bldg No P-12, P-18, P-19 and P-51 at TRV under GE Haddo, Port Blair. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises complete all as specified and as directed by Eng-in-Charge. | 2070 | Sqm | |
| 2 | 2 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified. | 24 | X Sqm | |
| 3 | 3 | Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed. | 37 | Cum | |
| 4 | 4 | M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry joint free and pointed in coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified. | 847 | Sqm | |
| 5 | 5 | All as per item No 04 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified. | 97 | Sqm | |
| 6 | 6 | M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified. | 270 | Sqm | |
| 7 | 7 | All as per item No 06 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified. | 20 | Sqm | |
| 8 | 8 | M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified. | 109.65 | Sqm | |
| 9 | 9 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified | 109.65 | Sqm | |
| 10 | 10 | M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick backing coat in CM (1:3) complete all as specified. | 836.22 | Sqm | |
| 11 | 11 | M&L 40 mm thick polished cudappah stone slab in vertical and horizontal support for cooking platform, shelves and like including necessary jointing and pointing and making good to disturbed surface complete all as specified | 87 | Sqm | |
| 12 | 12 | M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing complete. \nNote : Colour of granite shall be as approved by Engr-In-Charge) | 153.13 | Sqm | |
| 13 | 13 | Rounding ( chamfering) to edge of marble/granite slab edge with mirror polishing complete. | 199 | RM | |
| 14 | 14 | Dismantling of ceiling boarding including grid of any description fixed in any position with nails | 302.1 | Sqm | |
| 15 | 15 | S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodoised sections specified in SSR part-I 2009 including cutting, drilling jointing etc complete including 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size and making good complete all as specified and as directed by Eng-in-Charge. | 302.1 | Sqm | |
| 16 | 16 | Taking down chowkhats or frames with shutters without taking off shutters from the frame exe 1.5 Sqm and n.exc 4 Sqm each | 220 | Each | |
| 17 | 17 | Taking down Aluminium Windows chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each | 61 | Each | |
| 18 | 18 | Taking down Aluminium Windows and Ventilator chowkhats or frames with shutters without taking off shutters from frame n. exe 1.5 Sqm each | 171 | Each | |
| 19 | 19 | S&F IInd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints. | 5.39 | Cum | |
| 20 | 20 | S&F flush shutter 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and directed. | 182.4 | Sqm | |
| 21 | 21 | S&F 35mm thick, IInd class hard wood glazed and skeleton shutter open rebated and prepared to receive gauze, etc. ( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing gauze etc size of members of shutters as specified in SSR Part I Ses 8 Cl 8.24 (a) | 147.2 | Sqm | |
| 22 | 22 | S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed | 220 | RM | |
| 23 | 23 | S & F for Factory made solid PVC moulded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified | 65.26 | Sqm | |
| 24 | 24 | S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed. | 708 | Kg | |
| 25 | 25 | M & L cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in lintle upto 1.5m clear span, steps, bed plates, kerb & coping including necessary formwork. | 2.04 | Cum | |
| 26 | 26 | S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 | 750 | Each | |
| 27 | 27 | S&F extruded aluminium alloy handle fabricated type anodized 150mm long. | 500 | Each | |
| 28 | 28 | S&F extruded aluminium alloy handles fabricated type, anodised, 100mm long. | 258 | Each | |
| 29 | 29 | S&F Aluminum anodized barrel tower bolt of extruded section 150mm long | 294 | Each | |
| 30 | 30 | S&F extruded aluminium anodised 75mm long hasp and staple, safety type incl bolt to hinge plate and fixed with screws complete all as specified. | 44 | Each | |
| 31 | 31 | S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded section or cast aluminum alloy | 206 | Each | |
| 32 | 32 | S&F in repair 2nd class HW plain fillets rectangular or triangular section wrought fixed scews exc 13 sqcm and n.exc 25 sqcm | 63 | Rm | |
| 33 | 33 | M&L for HDF boards (fire & water proof) of 19mm thick as in CB, cabinet, shelves etc & like with and including 02 coats of synthetic enamel spray painting glossy finish over a coat of primer incl preparation of surfaces complete all as specified and as directed. | 256.9 | Sqm | |
| 34 | 34 | S&F auto hinges stainless steel grade AISI-316 (type Austenitic anticorrosive in nature) suitable for kitchen cabinets,CB , Shelves etc | 252 | Each | |
| 35 | 35 | S&F contineous (Piano) hinges mild steel bright finish or electrogalvanised, width of flaps 40 mm | 176 | Rm | |
| 36 | 36 | M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified | 1251.58 | Sqm | |
| 37 | 37 | S& F for powder coated aluminium shutters of sliding/ openable/ fixed/ fully glazed/partially glazed/fully gauge/ Skelton door/ window and ventilator frame etc., with glass or gauge and panels with prelaminated particle board inserts, side hung type, without sash bars, using standard aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, roller for sliding windows, locking arrangement, anodized aluminium fittings such as handles, required hinging device etc. complete all as specified and directed. \nNote:- Wire mesh and Glass pane will be measured and paid seperately as in supply only. | 3224 | Kgs | |
| 38 | 38 | Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane. | 199 | Sqm | |
| 39 | 39 | Supply only figured glass, pin head type 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane. | 17.82 | Sqm | |
| 40 | 40 | S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed | 220 | Each | |
| 41 | 41 | S&F brass 300mm,long ordinary rat tail rod pattern door springs including roller and roller plate complete | 88 | Each | |
| 42 | 42 | Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed. | 107.48 | Sqm | |
| 43 | 43 | Supply and fix aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed. | 77 | Sqm | |
| 44 | 44 | S&F powder coated aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including F sections, fixed to aluminium windows/ventilators complete all as specified and directed. | 726.5 | Kg | |
| 45 | 45 | Dismantling of cast iron/PVC pipe any dia and any shape incl bends/branch pieces jointed in cement mortar and taking out. | 493 | Rm | |
| 46 | 46 | S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified. | 228 | RM | |
| 47 | 47 | S&F for 110mm dia PVC (SWR) bends any radius complete all as specified. | 30 | Each | |
| 48 | 48 | S&F for 110mm dia PVC (SWR) bends with access door any radius complete all as specified. | 36 | Each | |
| 49 | 49 | S&F for 110mm dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified. | 16 | Each | |
| 50 | 50 | S&F for 110mm dia PVC (SWR) vent cowl complete all as specified. | 12 | Each | |
| 51 | 51 | S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified. | 160 | RM | |
| 52 | 52 | S&F for 75 mm dia PVC (SWR) grade bends of any radius | 12 | Each | |
| 53 | 53 | S&F for 75 mm dia PVC (SWR) grade bends with access door of any radius | 30 | Each | |
| 54 | 54 | S&F PVC (SWR) branch piece, single (Single T ) of radius equal or unequal, 75mm dia. | 18 | Each | |
| 55 | 55 | S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia. | 8 | Each | |
| 56 | 56 | S&F PVC (SWR) vent cowl, 75mm dia. | 12 | Each | |
| 57 | 57 | M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified. | 82 | Each | |
| 58 | 58 | S&F in repairs vitreous china ware counter wash hand basin ovel shape of size 550x 400 mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete. | 22 | Each | |
| 59 | 59 | S&F in repairs 32mm bore brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipes or connection incl necessary packing, union and caps etc complete all as specified. | 22 | Each | |
| 60 | 60 | S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts(Make :Prayag Cat No. PIS-50H) | 22 | Each | |
| 61 | 61 | S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down for Iron pipe or for brass fancy CP 15mm dia(Make :Prayag Cat No. PIS-08H) | 26 | Each | |
| 62 | 62 | S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make : Prayag Cart Part No PIS-12 H) | 26 | Each | |
| 63 | 63 | S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make :Prayag Cat No. PIS-10 H) | 114 | Each | |
| 64 | 64 | S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC seat cover etc complete all as specified. | 26 | Each | |
| 65 | 65 | S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handle including brackets complete all as specified. | 26 | Each | |
| 66 | 66 | S & F Brass chromium plated towel rack with lower hanger (stainless steel) with hook. (Make Prayag Cat Part No. BA-12) | 22 | Each | |
| 67 | 67 | S & F in repairs Brass chromium plated towel ring with round flange. (Make Prayag Cat Part No. BA-11) | 22 | Each | |
| 68 | 68 | S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange. (Make Prayag Cat Part No. BA-70) | 22 | Each | |
| 69 | 69 | S&F in repairs Brass chromium plated toilet paper holder. (Make Prayag Cat Part No. BA-38) | 26 | Each | |
| 70 | 70 | S&F in repairs Brass chromium plated Soap dish holder. (Make Prayag Cat Part No. BA-45) | 22 | Each | |
| 71 | 71 | S&F in repairs Hand shower (health faucet) with 8mm dia & 1.0mtr long flexible tube with wall hook. (Make PrayagCat Part No. BEA-41) | 26 | Each | |
| 72 | 72 | S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches and in floor etc using synthetic rubber adhesive cement solvent complete all as specified. | 40 | RM | |
| 73 | 73 | S&F in repairs PVC connection 15 mm dia and 600 mm long with bolt and nuts | 114 | Each | |
| 74 | 74 | S&F looking mirror 600 x 450 mm bevelled edge of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood & fixed to wooden plugs with chromium plated brass screws and cup washers complete. | 22 | Each | |
| 75 | 75 | S&F in repairs PVC cabinet of size 61cm x 41cm x 10cm with 4mm thick front mirror of size 60x40cm & shelf inside etc complete all as specified. | 22 | Each | |
| 76 | 76 | S&F in repairs 1mm thick Stainless steel sink with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified. | 18 | Each | |
| 77 | 77 | Material and Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble/granie/cudappah stone etc | 18 | Each | |
| 78 | 78 | S& F in repairs 20mm dia, Harrison rails, powder coated anodized aluminium alloy with fixing curtain brackets, stops, rollers etc | 450 | RM | |
| 79 | 79 | S&F in repairs wardrobe aluminium hooks single 50mm to 60mm width complete all as specified and as directed. | 264 | Each | |
| 80 | 80 | S&F in repairs for plate rack of stainless steel of size 31X36X10 (inch) with steel sleevs & hanging arrengement for utensile, complete all as specified and directed (Make : Prayag Cat No. P-348) | 18 | Each | |
| 81 | 81 | S & F in repairs for wall mixer 3-in-1 system with provision for both hand shower and over head shower composite with 115 mm long bend pipe connecting legs & wall flanges Mixer (Make: Prayag Cat No PIS-80H), hand shower including 1.5 mtr flexible tube with hook Cat No BHS-87, and over head showerwith arm and flange(300mm) of cat No BOS-90. | 22 | Each | |
| 82 | 82 | S&F Corner glass shelf assembly size 300mm with chromium plated bracket guard and railing (Make: Prayag Cat No. BEA-44) | 44 | Each | |
| 83 | 83 | S&F in repairs concealed stop Cock with wall flange incl\n all fittings complete all as specified and as directed.\nMake : Prayag cat No-7318 | 4 | Each | |
| 84 | 84 | S&F in repairs CP overhead shower dia 130 mm with revolving joints (with body rotation) & 225mm long arm shower with rabit cleaning system and all fittings Make - Prayag BS-76 as approved. | 4 | Each | |
| 85 | 85 | Taking up or down 15mm dia steel tubing connection, including cleaning for refixing or removal to store | 210 | RM | |
| 86 | 86 | Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store | 290 | RM | |
| 87 | 87 | Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store | 350 | RM | |
| 88 | 88 | S& F for 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc | 290 | Rm | |
| 89 | 89 | S& F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc | 350 | Rm | |
| 90 | 90 | S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes | 22 | Each | |
| 91 | 91 | S&F in repairs for providing 20mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes. | 12 | Each | |
| 92 | 92 | Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by Engineer- in- charge. | 210 | RM | |
| 93 | 93 | S&F rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge. | 22 | Each | |
| 94 | 94 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge. | 22 | Each | |
| 95 | 95 | M&L for low density polyethylene (LDPE) pipes of 50mm, pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc | 65 | RM | |
| 96 | 96 | Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings. | 430 | Sqm | |
| 97 | 97 | S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as specified. | 370 | Sqm | |
| 98 | 98 | S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws as specified. | 60 | Sqm | |
| 99 | 99 | Dismantling structural steel work complete all as specified. | 27.5 | Qtl | |
| 100 | 100 | M&L for rolled section as in main and cross beam, hip and jack rafter,purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of grade Fe-410 (grde E-165) | 2000 | Kgs | |
| 101 | 101 | S&F rolled mild steel in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete Fe 410 -W (GdeE- 250) qualityA | 750 | Kg | |
| 102 | 102 | M&L for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering and including dismantling of old wind tiles. | 120 | Kgs | |
| 103 | 103 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as directed. | 160 | Sqm | |
| 104 | 104 | M&L for preparation of old steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as directed. | 150 | Sqm | |
| 105 | 105 | S & F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location including taking down old railing of any description complete all as specified and as directed. | 450 | Kg | |
| 106 | 106 | Demolition of cement concrete of any description and in sunken floor /roof padding etc not otherwise specifically provided for. | 8.4 | Cum | |
| 107 | 107 | Roughening to old concrete floor surface by hammer and cleaning by picking, sweeping clean and washing down with water to remove dust etc. | 80 | Sqm | |
| 108 | 108 | M&L PCC (1:3:6) type D2 using 40mm graded stone aggregate as in filling in sunken floors complete all as specified & directed by Engineer-in-Charge. | 6 | Cum | |
| 109 | 109 | M&L for PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in roof padding / sunken floors and similar work using WPC @ 3% by weight of cement complete all as specified. \n(Note : WPC shall be measured and paid separately) | 2.4 | Cum | |
| 110 | 110 | M&L 10 mm thick Plaster on RCC roof slab with CM ( 1:4 )using water proofing compound @ 3% by weight of cement complete all as specified. \n(Note : WPC shall be measured and paid separately) | 80 | Sqm | |
| 111 | 111 | M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm one coat of bitumen based paint @1.20 ltr/sqm over APP membrane including removal of existing water proofing treamant on roof, sunken slabs, edges and vertical surfaces complete all as specified | 80 | Sqm | |
| 112 | 112 | M&L for applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over Bitumen surface complete all as specified and as directed. | 80 | Sqm | |
| 113 | 113 | Supply only water proofing compound. | 40 | Kg | |
| 114 | 114 | S&F 25mm Tubes medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors and spout in sunken slab | 10 | Rm | |
| 115 | 115 | Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed. | 6 | Cum | |
| 116 | 116 | M&L precast cement concrete block masonry exc. 10 cm width with solid block type C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified. | 2 | Cum | |
| 117 | 117 | M&L precast cement concrete solid building blocks or slabs Type C1 1:3:6 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in cement morta 1:4 complete, in walls | 40 | Sqm | |
| 118 | 118 | Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified. | 640 | Sqm | |
| 119 | 119 | M&L for rendering in two layer i.e.5mm thick in CM 1:4 including mixing water proofing compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished even and smooth without using extra cement on all as specified.\n(Note: WPC shall be measured and paid separately) | 350 | Sqm | |
| 120 | 120 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified. | 170 | Sqm | |
| 121 | 121 | M&L for 5mm thick plaster in CM (1:3) on fair faces of concrete surfaces of ceiling finished even and smooth (without using extra cement) all as specified. | 120 | Sqm | |
| 122 | 122 | Taking down of damaged, loosened cement concrete/cement mortar in RCC walls/soffits of slabs and similar structure members up to depth of 20mm to 40mm cleaning the dismantled portion with wire brush etc remove dust , dirt and other foreign particles etc and washing with water with pressure and applying bonding agent on old concrete surfaces all as per manufacturers instruction, over prepared surfaces provide 20 mm thick High build polymer modified cement sand mortar ( 1:2.5 ) mixed with 10 liters (minimum) Nitobond SBR per 50 kilogram of cement of M/s FOSROC chemical ( India ) Pvt Ltd or Equivalent product all as manufacturers instruction including necessary scaffolding up to 12 m height complete all as specified and directed. | 110 | Sqm | |
| 123 | 123 | M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer including levelling the surface which undulation found with cement putty 3mm average thick wall care putty etc complete all as specified and directed. | 170 | Sqm | |
| 124 | 124 | M&L for preparation of newly plastered ceiling surfaces applying two coats of oil bound distemper over one coat of primer etc complete all as specified and as directed. | 120 | Sqm | |
| 125 | 125 | M&L for preparation on newly plastered external wall surface and applying two coats of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard). | 350 | Sqm | |
| 126 | 126 | M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc and applying two coats of acrylic emulsion distemper over a coat of primer including filling of cracks, holes and including leveling the surface with wall care putty 3mm thick etc all as specified and as directed. | 4113 | Sqm | |
| 127 | 127 | M&L for complete removal of existing treatment by scrapping, washing, cleaning etc and applying two coats of oil bound distemper over one coat primer including filling of cracks, holes etc. with cement putty complete all as specified. | 1278 | Sqm | |
| 128 | 128 | M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coats of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard). | 2307 | Sqm | |
| 129 | 129 | Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `B' | 4 | X RM | |
| 130 | 130 | M&L for ATT post construction bldg along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. | 130 | RM | |
| 131 | 131 | M&L for ATT providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is nor provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete | 110 | Sqm | |
| 132 | 132 | M & L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same | 860 | Rm | |
| 133 | 133 | M & L for anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors | 150 | Sqm | |
| 134 | 134 | Demolition of cement concrete of any description and in manhole cover slabs etc otherwise specifically provided for. | 8 | Cum | |
| 135 | 135 | Separating, scraping and cleaning of reinforcement obtained from demolition of concrete. | 8 | QTL | |
| 136 | 136 | M&L for pre cast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole cover slab set in cm 1:6 all as specified and directed | 8 | Cum | |
| 137 | 137 | S&F CRS TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cracking bending spirally for hooping for columns/beams, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. | 800 | KG | |
| 138 | 138 | M&L for PCC 1:2:4 type B2 as in surface channel and drain & benching of manhole and finishing even and smooth without using extra cement. | 2.5 | Cum | |
| 139 | 139 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in cooping | 2.5 | Cum | |
| 140 | 141 | M&L for PCC type C2 1:3:6 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed. | 8 | Cum | |
| 141 | 142 | Supply & fabricate and fixing in position MS angle iron posts, beam, channels with flange plate for fencing posts and struts including flat iron etc and including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets for securing fencing including all necessary welding , drilling, bolting or riveting, complete all as specified and directed.(Steel confirming to Fe-290 (Gde E-165)). | 905 | KG | |
| 142 | 143 | S & F for MS Galvanized with PVC coated chain link fencing, 3 mm nominal dia of GI wire, 1.4mm thick PVC coating and avg area of aperture 0.25 sqcm and/or weight of the fencing not less than 3.00 kg/sqm including dismantling of old chain link fencing complete all as specified and as directed. | 351 | Sqm | |
| 143 | 144 | S & F for 10mm dia and over MS round bar for tighting/securing fencing wire etc complete all as specified and as directed. | 460 | KG | |
| 144 | 145 | S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long and diameter of neck n. exc 12mm Complete all as specified | 50 | KG | |
| 145 | 146 | S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 | 276 | KG | |
| 146 | 147 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as directed. | 90 | Sqm | |
| 147 | 148 | M&L for preparation of new steel surfaces of any description n.exc 10cm width or girth and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as directed | 30 | X RM | |
| 148 | 149 | Surface excavation in hard/dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out all as specified and as directed by Eng-in-Charge. | 246 | Sqm | |
| 149 | 150 | Removing excavated soil to a distance n.exc.50m deposited complete all as specified and as directed. | 49.2 | Cum | |
| 150 | 151 | M&L for broken stone or boulders hard core of gauge n.exc. 63 mm deposited, spread and levelled in layers of not exc.15 cm thick, watered and rolled rammed to a true surface. | 24.6 | Cum | |
| 151 | 152 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & as directed by Engineer-in-Charge. | 24.6 | Cum | |
| 152 | 153 | M&L for glossy finished machine pressed precast concrete interlocking paver block glossy finished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80mm thickness, M-40 Grade laid dry to any pattern or profile as directed incl filing to the edges in CM 1:4 all manufacturer's instruction complete all as specified and directed | 246 | Sqm | |
| 153 | 154 | M&L for sand filling under floors or in foundation including watering and consolidation incl spreading and levelling | 12.3 | Cum | |
| 154 | 155 | Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc. | 900 | Per \nPoint | |
| 155 | 156 | Taking down fuse Unit/DBs 415 Volt/230 Volt and taken as credit. | 21 | Each | |
| 156 | 157 | Taking down old aluminium sub main wiring of any size and taken as credit. | 1900 | RM | |
| 157 | 158 | M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed FRLS cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green multi-stranded copper conductor drawn through and including rigid non-metallic PVC Casing & Caping of suitable size but not less than 25mm dia , with all fittings, fixed on wall/ceiling /floor including sunk pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover for mounting switches/sockets/regulators etc complete as specifed (inner and outer) . along with necessary metal boxes flush mounting in the wall duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for :- Make: Gloster/Havells/Anchor/Polycab/Finolex | |||
| 158 | 158.01 | One light/fan point controlled by one switch 5 Amps one way. | 462 | Point | |
| 159 | 158.02 | One light point controlled by two 2-way switches. | 6 | Point | |
| 160 | 158.03 | One 3 pin 5 Amp socket out let on independent board. | 170 | Point | |
| 161 | 158.04 | One 3 pin 5 Amps socket out let on same Board | 110 | Point | |
| 162 | 158.05 | One bell point controlled by one bell push switch 5 Amps one way. | 22 | Point | |
| 163 | 159 | All as per item No.158 above but point wiring with 4.0 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket out let, and one run of 4.0 sqmm cable for earth in green colour on independent board. | 130 | Point | |
| 164 | 160 | S & F snap switch 6/10 Amp one way 230 V AC \nMake : ROMA(Anchor)/Havells (Crabtree)/Legrand | 550 | Each | |
| 165 | 161 | S & F snap switch 16/20 Amp one way 230 V AC \nMake : ROMA(Anchor)/Havells (Crabtree)/Legrand | 130 | Each | |
| 166 | 162 | S & F snap switch 6/10 Amp two way 1 module 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand | 6 | Each | |
| 167 | 163 | S & F snap bell push 6 Amp one way 230 V AC \nMake : ROMA(Anchor)/Havells (Crabtree)/Legrand | 22 | Each | |
| 168 | 164 | S & F socket outlet 6/10 Amp intel multi socket for all pins 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand | 280 | Each | |
| 169 | 165 | S & F socket outlet 16/20 Amp and 6/10 Amp two socket heavy duty 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand | 130 | Each | |
| 170 | 166 | S & F Ceiling rose PVC polycarbonate, isolated body 3 terminals 230 V complete. | 380 | Each | |
| 171 | 167 | S&F Electric Bell, Ding dong type working on 230 volts AC supply complete all as directed by Engineer -in- charge .Make: Anchor/Kinjal/Standard | 22 | Each | |
| 172 | 168 | S & F fan regulator electronic socket two module step type 120 W complete all as specified.Make : ROMA(Anchor)/Havells (Crabtree)/Legrand | 70 | Each | |
| 173 | 169 | S & F starter switch of capacity 25 amps, working on 240 volts AC supply and suitable for air conditioner all as directed.Make, Crabtree (ACTO202504) OR Phillips / Bajaj / CG | 24 | Each | |
| 174 | 170 | Taking down carefully ceiling fan of any make, size form its location, handed over to AGE E/M store yard without any damage | 70 | Each | |
| 175 | 171 | S & F Ceiling fan 5 star rated, 1200mm sweep, of model No.Enticer Hues (Spiro Neo Woody white) working on single phase 230 volts, 50Hz AC supply complete with down rod and canopy including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of size of 0.75 sq mm complete all as per directed by Engineer - in - charge. Make: Havells (Model No.SPIRO NEO)/Bajaj/CG/Gorialla | 70 | Each | |
| 176 | 172 | Taking down carefully electric geyser of any make, size form its location, handed over to AGE E/M store yard without any damage | 26 | Each | |
| 177 | 173 | S & F Energy Efficient BEE 5 star rated instant water heater storage type of 25 liters capacity, vertical electric supplied and installed complete including flexible pipe for hot and cold water, dead weight pressure relese valve, Anchor fastner - 4Nos of suitable size all as directerd by Engineer-in-charge. Make: Havells Model No (GHWENZTWG025)/Bajaj/Racold. | 26 | Each | |
| 178 | 174 | Taking down carefully exhaust fan of any make, size from its location, dismantling complete, examine complete parts thoroughly, oiling, greasing all parts and complete overhauling of fan incudingl replacement of small parts such as split pin, nut bolt, screws and assembling back the fan, make fully functional, re-fixing the fan to its position including replacing and providing of twin core copper wire 23/0.0076 from fan to ceiling rose and painting the fan with same colour of fan complete all as directed. | 44 | Job | |
| 179 | 175 | Taking out old burnt winding of exhaust fan motor of 300/380/450mm sweep and M& L for rewinding with new copper winding wire of same gauge with approved quality of super enameled copper winding wire including varnishing heating etc complete all as directed. \n | 30 | Each | |
| 180 | 176 | Supply and fix of fan blade for exhaust fan of 300/380 mm sweep complete all as directed. | 30 | Each Set | |
| 181 | 177 | S & F Sub main wiring with PVC insulated FRLS cable 2 single core 6 sq mm 1100 V grade with stranded copper conductor using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC Casing & Caping (ISI marked) incl all specials/accessories etc and provision of PVC insulated FRLS copper conductor single core 6.0 sq mm for earth continuity all as directed. Make: Gloster/Havells/Anchor/Polycab/Finolex Note : 3 m length of cable and one metre length casing caping shall be measured and paid for one RM. | 1000 | RM | |
| 182 | 178 | S & F Sub main wiring with PVC insulated cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC casing and caping on wall (ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 4.0 sq mm for earth continuity all as directed.Make: Gloster/Havells/Anchor/Polycab/Finolex Note : 3 m length of cable and one metre length casing caping shall be measured and paid for one RM | 900 | RM | |
| 183 | 179 | S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways. Make: Legrand/L&T/Havells/Indo Asian | 18 | Each | |
| 184 | 180 | S & F single pole and neutral sheet steel powder coated distribution board double door 04 ways for MCBs fitted with bus bar, neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz, complete all as directed.\n | 26 | Each | |
| 185 | 181 | Supply and fix RCCB of 2 pole, 25 Amp rating with sensitivity of 30 mA suitable for 240 Volts .Make: L&T(BG202503)/Havells/Indo Asian | 26 | Each | |
| 186 | 182 | S & F DB VTPN sheet metal enclosure double door suitable for incoming MCCB 125 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and as directed. Make : Havells/L&T/Indo Asian/Legrand/Schneider | 3 | Each | |
| 187 | 183 | Supply and Fixing 4 pole MCCB 125 Amp, 50 Hz, 415 V with rupturing capacity 16 KA complete all as specified and directed Make :Havells/L&T/Legrand/Indo Asian | 3 | Each | |
| 188 | 184 | S& F MCB DP, 40 amps, 10 KA, 240 volts, Make: Legrand/L&T/Havells/Indo Asian | 18 | Each | |
| 189 | 185 | S& F MCB SP, 6-32 amps, 10 KA, 240 volts, Make: Legrand/L&T/Havells/Indo Asian | 216 | Each | |
| 190 | 186 | Taking down the existing LED light fitting and keep in safe custody and refixing it in working and in good condition after completion work in same position. | 348 | Each | |
| 191 | 187 | Taking down carefully existing electronic energy meter of any capacity and any size handed over to AGE E/M store yard and S&F single phase kwh meter with LCD display of capacity 10-60A with optical port with tamper proof model EM101+Class 1 Base mounting all as directed. Make: L&T (cat no.WM 101BC7DDH)/Schnider/Areva. | 18 | Each | |
| 192 | 188 | S&F polycarbonate sheet enclosure factory made for accomdating one energy meter and one SPN MCB including 40 Amp DP MCB all as directed. | 18 | Each | |
| 193 | 189 | Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 mm Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber, MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata, returning, filling removal of soil outside MD land, filling of charcoal and salt complete all as shown in electrical plate No.3 of MES Sch Part I , connected to Earthing test point all as specified and directed including testing on completion. | 3 | Each Set |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
