Rural Development Department has published Construction Of Open Sabhamandap Near Dr. Babasaheb Ambedkar Statue On Gp Open Place At Shevti Tq. Amravati C . Submission Date for this Tender is 16-06-2021. Building Work Tenders in AMRAVATI Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Jun-2021 | DATE EXTED | Date | 16-06-2021 |
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel andsoft murum, including removing the excavated material up to adistance of 50 m. beyond the building area and stacking and spreadingas directed, dewatering, preparing the bed for the foundation andnecessary back filling, ramming, watering including shoring andstrutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Providing soling using 80 mm size trap metal in 15 cm. layer includingfilling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10of trap/ granite/ quartzite/ gneiss metal for foundation and beddingincluding bailing out water, Steel centering, formwork,laying/pumping, compacting, roughening them if special finish is to beprovided, finishing if required and curing complete, with fullyautomatic micro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finelywashed etc) |
| 4 | Providing and laying in situ /Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. work in foundationslike raft, strip foundations, grillage and footings of R.C.C. columns andsteel stanchions etc. including bailing out water, Steel centeringformwork, laying/pumping cover blocks, compaction and curingroughening the surface if special finish is to be provided (Excludingreinforcement and structural steel) etc. complete, with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. columns as perdetailed designs and drawing or as directed including steel centering,formwork, cover blocks, laying/pumping, compaction finishing theformed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if specialfinish is to be provided and curing etc. complete,(Excludingreinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 6 | Providing and filling in the foundation with sand of approved qualityincluding watering, compacting etc. complete. (To be executed withprior approval of Superintending Engineer) |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels asper detailed designs and drawings or as directed including steelcentering, formwork, cover blocks, laying/pumping, compactionandroughening the surface if special finish is to be provided and curingetc. complete. (Excluding reinforcement and structural steel). withfully automatic micro processor based PLC with SCADA enabledreversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand VSIGrade finely washed etc) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detaileddesign and drawings including steel centering, formwork, cover blockscompacting , curing , finishing and roughening the surface if specialfinish is to be provided and curing complete. (Excluding reinforcementand structural steel).with fully automatic micro processor based PLCwith SCADA enabled reversible Drum Type mixer/ concrete Batch mixplant (Pan mixer) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) |
| 9 | Providing and fixing in position TMT - FE - 500 bar reinforcement ofvarious diameters for R.C.C. pile caps, footings, foundations, slabs,beams columns, canopies, staircase, newels, chajjas, lintels pardis,copings, fins, arches etc. as per detailed designs, drawings andschedules. including cutting, bending, hooking the bars, binding withwires or tack welding and supporting as required complete. |
| 10 | Providing second class Burnt Brick masonry with conventional/ I.S.type bricks in cement mortar 1:6 in foundations and plinth of innerwalls/ in plinth external walls including bailing out water manually ,striking joints on unexposed faces, raking out joints on exposed facesand watering etc. Complete. |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 oftrap/ granite/quartzite/gneiss metal for coping to plinth or parapet,moulded or chamfered as per drawing or as directed including steelcentering, plywood/ steel formwork compacting, roughening them ifspecial finish is to be provided, finishing uneven and honeycombedsurface and curing etc. complete. The Cement Mortar 1:3 plaster isconsidered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, tarpaulinetc. (Wooden centering will not be allowed.) With fine aggregate(Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 12 | Providing second class Burnt Brick masonry with conventional/ I.S.type bricks in cement mortar 1:6 in superstructure including strikingjoints, raking out joints, watering and scaffolding etc. Complete |
| 13 | Filling in plinth and floors with approved excavated material in 15cm.to 20cm. layers including watering and compacting etc. complete. |
| 14 | Providing internal cement plaster 12mm thick in single coat in cementmortar 1:5 without neeru finish to concrete or brick surfaces, in allpositions including scaffolding and curing etc. complete. |
| 15 | Providing sand faced plaster externally in cement mortar usingapproved screened sand, in all positions including base coat of 15 mmthick in cement mortar 1:4 using waterproofing compound at 1 kg percement bag curing the same for not less than 2 days and keeping thesurface of the base coat rough to receive the sand faced treatment 6to 8 mm thick in cement mortar 1:4 finishing the surface by taking outgrains and curing for fourteen days scaffolding etc.complete. |
| 16 | Providing and applying pearl/ luster finish paint of approved colourand shade to the existing plaster surface including scaffolding,preparing the surface, applying the acrylic wall putti etc. complete. |
| 17 | Providing and applying two coats of exterior weather shield paint ofapproved manufacture and of approved colour to the plasteredsurfaces including cleaning ,preparing the plaster surface ,applyingprimer coat ,scaffolding if necessary, and watering the surface for twodays etc complete. |
| 18 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings asper detailed designs and drawings including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formedsurfaces with cement mortar 1:3 of sufficient minimum thickness togive a smooth and even surface or roughening if special finish is to beprovided and curing etc. complete,(Excluding reinforcement andstructural steel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) |
| 19 | Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mmthickness and confirming to IS. 15622-2006 ( group Bla) of approvedmake, shade and pattern for flooring in required position laid on a bedof 1:4 cement mortar including neat cement float, filling joints, curingand clearing etc. complete. a) Flooring |
| 20 | Providing and laying vitrified mirror / glossy finish tiles having size590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness andconfirming to IS. 15622-2006 ( group Bla) of approved make, shadeand pattern for flooring in required position laid on a bed of 1:4cement mortar including neat cement float, filling joints, curing andclearing etc. complete.b) Skirting |
| 21 | Providing internal cement plaster 6 mm thick in a single coat incement mortar 1:4 without neeru finish to concrete surface in allpositions including scaffolding and curing etc. complete. |
| 22 | Providing and applying Two coats of wall care Putty on plasteredsurface and Ceiling and Walls to prepare surface even and smooth ofapproved make, etc complete. |
| 23 | Providing and fixing heavy duty inter locking concrete RUBBERMOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of havinga strength of 400 Kg/sq.m of approved quality and shape on a bed ofcrushed sand of 25 to 30 millimeter thick including striking joints andcleaning etc. complete. (using 100% crushed sand) |
| 24 | Providing and fixing Road junction / Information sign board of size1.20 m x 0.90 m. prepared on 16 gauge M.S. sheet with angle ironframe of size 35 x 35 x 5 mm with cross bracing of size 35 x 35 x 5 mmProviding and laying in trenches 15 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.including painting with one coat of zinc cromate stoving primer andtwo coats each of green/white back ground and back side gray stoveenamelled, bonded with red retro reflective sheet Engineering grade,border / letters / numeral /arrows, coated with non pealable crystalclear protective transperent coat retaining 100% reflectionincludingtwo angle iron post of size 65 x 65x 6 mm of 3.65 m. longinflated at bottom drilled on top and painted in whiteand black bandsof 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mmdia. and 20 mm long sheet and angle iron post in one piece withoutjoints including all taxes, conveying, fixing in ground with M-20cement concrete of 60 cm x 60 cm x 75 cm size as directed byEngineer-in- charge etc. complete. Mild Steel sheet with Engineeringgrade. |
| 25 | Providing and fixing mild steel grill work for windows, ventilators etc.20 kg/sqm as per drawing including fixtures, necessary welding andpainting with one coats of anticorrosive paint and two coats of oilpainting complete. |
| 26 | PART C Testing OfCube M-20 1 for Footing Compressive Strength |
| 27 | 1 for Footing Compressive Strength |
| 28 | 1 for Footing Compressive Strength |
| 29 | 1 for Footing Compressive Strength |
| 30 | vetrifies tiles |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
