| 1 | 1 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. HSR 5.44 | BI01010001010000000000000515BI0100001113 | 16.56 | sqm |
|---|
| 2 | 2 | 6.1.6 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001114 | 7.87 | cum |
|---|
| 3 | 3 | Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : HSR 7.22\n7.22.2 Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001115 | 1.59 | cum |
|---|
| 4 | 4 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. HSR 8.27\n8.27.2 Granite work | BI01010001010000000000000515BI0100001116 | 2.5 | Metre |
|---|
| 5 | 5 | Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. HSR 10.10 \n10.10.1 40 mm thick with 20 mm nominal size stone aggregate | BI01010001010000000000000515BI0100001117 | 17.1 | sqm |
|---|
| 6 | 6 | Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : HSR 10.37\n10.37.1 25 mm thick | BI01010001010000000000000515BI0100001118 | 16.56 | sqm |
|---|
| 7 | 7 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. HSR 10.50\n10.50.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | BI01010001010000000000000515BI0100001119 | 0.5 | sqm |
|---|
| 8 | 8 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. HSR 10.57\nNote: - (i) Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPOLO (Sample of Tiles to be got approved from Engineer-in-charge). \n (ii) Tiles shall be fixed by using PVC spocess of required size and the space between tiles shall be filled up with cement based grout of approved make 7 colour. Nothing extra whall be paid for this. | BI01010001010000000000000515BI0100001120 | 4.56 | sqm |
|---|
| 9 | 9 | Providing and fixing of P.V.C. sheet flexible type conforming to I.S.3462-1966 flooring plain coloured marble or mottled finish on a smooth damp proof base laid with adhesive recommended by manufacturer including pressing the sheet with a suitable tool to get a smooth surface all complete as directed by the Engineer-in-Charge. 10.82\n10.82.2 2.00 mm thick | BI01010001010000000000000515BI0100001121 | 54.1 | sqm |
|---|
| 10 | 10 | 10.82.4 3.00 mm thick | BI01010001010000000000000515BI0100001122 | 48.1 | sqm |
|---|
| 11 | 11 | 15 mm cement plaster on the rough side of single or half brick wall of mix : HSR 11.6\n11.6.2 1:6 (1 cement: 6 fine sand) | BI01010001010000000000000515BI0100001123 | 33 | sqm |
|---|
| 12 | 12 | Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete HSR 11.58 | BI01010001010000000000000515BI0100001124 | 20.75 | sqm |
|---|
| 13 | 13 | Applying priming coat: HSR 11.68\n11.68.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | BI01010001010000000000000515BI0100001125 | 11.35 | sqm |
|---|
| 14 | 14 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. HSR 11.76 | BI01010001010000000000000515BI0100001126 | 29.04 | sqm |
|---|
| 15 | 15 | Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. HSR 11.77 | BI01010001010000000000000515BI0100001127 | 29.04 | sqm |
|---|
| 16 | 16 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: HSR 12.37\n12.37.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | BI01010001010000000000000515BI0100001128 | 12.1 | sqm |
|---|
| 17 | 17 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : HSR 12.98\n12.98.2 250x16 mm | BI01010001010000000000000515BI0100001129 | 8 | Each |
|---|
| 18 | 18 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR 12.99\n12.99.2 250x10 mm | BI01010001010000000000000515BI0100001130 | 12.1 | sqm |
|---|
| 19 | 19 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR 12.102\n12.102.1 125 mm | BI01010001010000000000000515BI0100001131 | 24 | Each |
|---|
| 20 | 20 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.\n12.103.1 Single rubber stopper | BI01010001010000000000000515BI0100001132 | 4 | Each |
|---|
| 21 | 21 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) :HSR 12.157 \n12.157.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\n12.157.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001133 | 75 | Kg. |
|---|
| 22 | 22 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): HSR 12.159\n12.159.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | BI01010001010000000000000515BI0100001134 | 9 | sqm |
|---|
| 23 | 23 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. HSR 12.160\n12.160.1 With stainless steel cover plate minimum 1.25 mm thickness | BI01010001010000000000000515BI0100001135 | 4 | Each |
|---|
| 24 | 24 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. HSR 12.173 | BI01010001010000000000000515BI0100001136 | 2 | Each |
|---|
| 25 | 25 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. HSR 22.181 | BI01010001010000000000000515BI0100001137 | 2000 | litre |
|---|
| 26 | 26 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete HSR 30.21 | BI01010001010000000000000515BI0100001138 | 20.75 | sqm |
|---|
| 27 | 27 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:HSR \n30.27.1 One or more coats on old work | BI01010001010000000000000515BI0100001139 | 1043.78 | sqm |
|---|
| 28 | 28 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : HSR\n30.28.1 One or more coats on old work | BI01010001010000000000000515BI0100001140 | 37.24 | sqm |
|---|
| 29 | 29 | Finishing walls with textured exterior paint of required shade: HSR 30.36 \n30.36.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 litre/10 sqm | BI01010001010000000000000515BI0100001141 | 84.4 | sqm |
|---|
| 30 | 30 | Finishing walls with Acrylic Smooth exterior paint of required shade :HSR 30.37\n30.37.1 Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface | BI01010001010000000000000515BI0100001142 | 127 | sqm |
|---|
| 31 | 31 | Removing and refixing of Lecture Theatre chair. Complete in all respects including rewal ply, PVC gitti, fasters. | BI01010001010000000000000515BI0100001143 | 12 | each |
|---|
| 32 | 32 | Granite polishing of exising kotoh stone floring inclidng filling joints as where required (N.S.) | BI01010001010000000000000515BI0100001144 | 336.25 | sqm |
|---|
| 33 | 33 | Dismantling Sycamore wooden panelling (with sycamore wooden section, 6mm commercial ply, hard wood section and 25mm / 32 density glass wool) as per drawing and specifications. complete in all respect and disposal of waste mateial as directed by Engineer-in-charge any lead. (N.S.) | BI01010001010000000000000515BI0100001145 | 66.45 | sqm |
|---|
| 34 | 34 | Providing and fixing 3.00 mm ACP sheet with aluminium section 1\" x 1½\" (16 gauge) having height upto 1.05 mtr. 3 No. horizontal & 450 mm vertical c/c and including refilling of old glass wool in panels which is in intact position ACP sheet fixed with double side tape and stick all complete in all respects as per design Make: (Super bond, Alutech, Alsotn, Imperia) (N.S.) | BI01010001010000000000000515BI0100001146 | 66.45 | sqm |
|---|
| 35 | 35 | Supply and fixing of 25mm thick 32 denisty glass wool as per drawing & specification as directed by Engineer-in-charge (Make: - Resin Bonded, Aerolam) (N.S.) | BI01010001010000000000000515BI0100001147 | 30.7 | Sqm |
|---|
| 36 | 36 | Removal of old U shape rubber gasket fixed and openable frame care fully with out broken Existing glass and clean the glass and fixed now U shape rubber gasket & glass fixed in to the openable / fixed frame if any bidding is missing conctractor/ agency fixed new aluminium bidding in his own cost. Complete as per directed by the Engg. In charge (N.S.) (Make: - Tempo, Haryana Modren | BI01010001010000000000000515BI0100001148 | 968.12 | Metre |
|---|
| 37 | 37 | Dry cleaning L.T. 250 SEATS (N.S.) | BI01010001010000000000000515BI0100001149 | 250 | Each |
|---|
| 38 | 38 | Dry cleaning of cloth fabric of wall panelling (N.S.) | BI01010001010000000000000515BI0100001150 | 194 | s qm |
|---|
| 39 | 39 | Providing & fixing rubber Matt tiles SUN-FLEX / SURYA 10mm thick with suitable required adesive. As per colour approved by Engineer-in-charge (N.S.) | BI01010001010000000000000515BI0100001151 | 94.6 | s qm |
|---|
