| 1 | 1 | (Part-i) Renewal and replacement of defective parts with commissioning of Emulsifier system for GTs at RSPP Shahpurkandi | | | |
|---|
| 2 | 1.01 | MS pipe 250mm dia Class B, Material MS, IS Standard IS:3589 (6mm thick) Make Jindal/ Prakash/ Asian/ Lloyd | Item 1 | 24 | Mtr. |
|---|
| 3 | 1.02 | MS pipe 200mm dia Class B, Material MS, IS Standard IS:3589 (6mm thick) Make Jindal/ Prakash/ Asian/ Lloyd | Item 2 | 18 | Mtr. |
|---|
| 4 | 1.03 | GI pipe 50mm dia Class B, Material GI, Standard IS:1239H, Make Jindal/ Prakash/ Asian/ Lloyd | Item 3 | 12 | Mtr. |
|---|
| 5 | 1.04 | GI pipe 25mm dia Class B, Material GI, Standard IS:1239H, Make Jindal/ Prakash/ Asian/ Lloyd | Item 4 | 12 | Mtr. |
|---|
| 6 | 1.05 | Y Strainder 200mm dia, Material MS Fabricated, Make Guj Otofilt, Trishul | Item 5 | 1 | No. |
|---|
| 7 | 2 | Y Strainder 150mm dia, Material MS Fabricated, Make Guj Otofilt, Trishul | Item 6 | 3 | Nos. |
|---|
| 8 | 3 | Butterfly valve 250mm dia, Material Cast Iron, IS Standard BS:5155, Make Saunders, L&T Audco, Intervalve | Item 7 | 2 | Nos |
|---|
| 9 | 4 | Butterfly valve 200mm dia, Material Cast Iron, IS Standard BS:5155, Make Saunders, L&T Audco | Item 8 | 3 | Nos |
|---|
| 10 | 5 | Butterfly valve 150mm dia, Material Cast Iron, IS Standard BS:5155, Make Saunders, L&T Audco | Item 9 | 9 | Nos |
|---|
| 11 | 6 | Deluge valve mechanical trim kit with water gong., the main drain valve, priming connection drip check valve, emergency release valve and electrical trim with solenoid valve 200 mm dia.Material Cast Iron, IS Standard UL Listed, Make HD Fire/ UTC/ TYCO | Item 10 | 1 | Set |
|---|
| 12 | 7 | Deluge valve mechanical trim kit with water gong., the main drain valve, priming connection drip check valve, emergency release valve and electrical trim with solenoid valve 150 mm dia. Material Cast Iron, IS Standard UL Listed, Make HD Fire/ UTC/ TYCO | Item 11 | 3 | Set |
|---|
| 13 | 8 | Nozzles-HVWS -Size 20mm, Material Brass, Make HD Fire/ New Age/ TYCO | Item 12 | 40 | Nos |
|---|
| 14 | 9 | QBD detectors Size 15mm, Material. Brass, Make HD Fire/ New Age/ TYCO | Item 13 | 40 | Nos |
|---|
| 15 | 10 | Pressure switch Make Trafag/ Switzer/ Indfos | Item 14 | 8 | Nos |
|---|
| 16 | 11 | Pressure Gauge 0-16 Kg Make H Guru/ A N Instruments/ Manometer | Item 15 | 8 | Nos |
|---|
| 17 | 12 | Local Control Panel for deluge valve, Make Pyrotech/ Nitya Electrical/ EIC | Item 16 | 4 | Nos |
|---|
| 18 | 13 | Mis. Fittings, Gaskets, Nut Bolts etc. IS approved same as pipe specifications | Item 17 | 1 | Lot |
|---|
| 19 | 14 | Paint (PO Red) 20 Ltr. & Primer(20 Ltr.) IS approved | Item 18 | 1 | Drum(each) |
|---|
| 20 | 15 | (Part-ii) Renewal and replacement of defective parts with commissioning of Emulsifier system for GTs at RSPP Shahpurkandi | | | |
|---|
| 21 | 16 | Charges for dismantlement, installation and commissioning of emulsifier system at RSD SHAHPURKANDI. Note:\n1. Firm will Supply above mentioned material as per technical specifications. (Annexure-A) 2. Bidder can visit the site to collect site requirements before quoting to avoid any complication later on.3 Any other activity including minor civil works if required or material required to complete Renewal and replacement of defective parts with commissioning of Emulsifier system for GTs at RSPP Shahpurkandi shall be in the scope of contractor/ firm. Hence quoted rate should include everything necessary for completion of job.4. Merit of L-1 bidder will be considered on the basis of total sum of price bid Part- i & Part-ii.\n5. All the dismantled material received on completion of the works shall have to be handed over to the owner and stacked in a manner approved by the Engineer in site without any extra cost to the owner.\n\n\n | Item 19 | 1 | job |
|---|
